If we don't have a DVS VSEL value already set when we start up then start
it off with the value currently being used for ON.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

If the VSEL is not in use prior to us starting up then we need to make
sure we initialise the GPIO before we push the DVS control to being done
by the GPIO.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Read our initial VSEL from the correct register.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

With multiple wm831x devices the device IDs used for the regulators will
not always be contiguous so simply taking the modulus is not sufficient
to look up the ID, we need to reverse the way the ID is generated.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

We need to dereference the pointers to print their values.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Properly kfree rdev->constraints in all set_machine_constraints() error paths.
Also properly kfree rdev->constraints in regulator_register() error paths.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Prevent some head scratching by making the core log about some rare but
possible errors with invalid voltage ranges and modes being set.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

For tps65910, the number of regulator is 13. ( ARRAY_SIZE(tps65910_regs) is 13)
For tps65911, the number of regulator is 12. ( ARRAY_SIZE(tps65911_regs) is 12)
If we are using this driver for tps65911,
we hit array access out of bounds bug in tps65910_probe() because
current implementation always assume the number of regulator is 13 and
thus it will access tps65911_regs[12].

Fix it by setting correct num_regulators for both chips in tps65910_probe(),
and allocated neccessay memory accordingly.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Also add a default case in tps65910_list_voltage_dcdc to silence
'volt' may be used uninitialized in this function warning.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Fix a memory leak if chip id is not matched.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

RES_ID is only used in 4030, to send PBM singular message to control
the state of dedicated resources. In 6030, we don't have concept of PBM,
hence removing the definition of RES_ID (num) from macros.
Signed-off-by: Ambresh K <ambresh@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Commit af46800b ("ASoC: Implement mux control sharing") revealed that
"Left Line1[L | R] Mux" and "Right Line1[L | R] Mux" widgets were pointing
to the same kcontrols and codec registers and thus soc-core falsely detected
them as shared controls. This is actually wrong since there are separate
registers in hardware that configure Line1L to RADC and Line1R to LADC cross
connects so these muxes should not be shared.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Report the requested load and voltage for each consumer in debugfs when it
is enabled.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

No actual users but provide the macro so there's less surprise when it's
not there.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Currently the regulator supply implementation is somewhat complex and
fragile as it doesn't look like standard consumers but is instead a
parallel implementation. This causes issues with locking and reference
counting.

Move the implementation over to using standard consumers to address this.
Rather than only notifying the supply on the first enable/disable we do so
every time the regulator is enabled or disabled, simplifying locking as we
don't need to hold a lock on the consumer we are about to enable.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

We may have multiple devices requesting a supply with the same name so
include the device name in the generated filename for microamps_requested
to avoid duplicate files.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

With verbose filenames we can easily hit 32 characters.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

Recent changes in the driver core appear to mean that the data structures
for the driver core are not fully initialised unless the driver is bound.
Make sure the driver core knows the dummy driver is in use by binding it
to a driver.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

The n_voltages initializer for the TWL6030_ADJUSTABLE_LDO macro is
off by one, causing the the highest supported voltage to be
unreachable.  Setting the machine constraints to only allow the
highest voltage causes errors:

machine_constraints_voltage: VAUX3_6030: unsupportable voltage constraints
twl_reg twl_reg.39: can't register VAUX3_6030, -22
twl_reg: probe of twl_reg.39 failed with error -22

This patch fixes the off by one error.  Tested by setting
VAUX3_6030 to 3.3V.
Signed-off-by: Colin Cross <ccross@android.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

The WM8994 regulator driver is perfectly happy if the GPIO used to enable
the regulator sleeps so call the appropriate GPIO API.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

In order to reduce the impact of ramp times rather than enabling the
regulators for a device in series use async tasks to run the actual
enables. This means that the delays which the enables implement can all
run in parallel, though it does mean that the order in which the
supplies come on may be unstable.

For super bonus fun points if any of the regulators are shared between
multiple supplies on the same device (as is rather likely) then this
will test our locking.  Note that in this case we only delay once for
each physical regulator so the threads shouldn't block each other while
delaying.

It'd be even nicer if we could coalesce writes to a shared enable registers
in PMICs but that's definitely future work, and it may also be useful
and is certainly more achievable to optimise out the parallelism if none
of the regulators implement ramp delays.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

.. except there are various scripts that really know that there are
three numbers, so it calls itself "3.0.0-rc1".

Hopefully by the time the final 3.0 is out, we'll have that extra zero
all figured out.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Remove ecryptfs_header_cache_2
  eCryptfs: Cleanup and optimize ecryptfs_lookup_interpose()
  eCryptfs: Return useful code from contains_ecryptfs_marker
  eCryptfs: Fix new inode race condition
  eCryptfs: Cleanup inode initialization code
  eCryptfs: Consolidate inode functions into inode.c

* 'pnfs-submit' of git://git.open-osd.org/linux-open-osd: (32 commits)
  pnfs-obj: pg_test check for max_io_size
  NFSv4.1: define nfs_generic_pg_test
  NFSv4.1: use pnfs_generic_pg_test directly by layout driver
  NFSv4.1: change pg_test return type to bool
  NFSv4.1: unify pnfs_pageio_init functions
  pnfs-obj: objlayout_encode_layoutcommit implementation
  pnfs: encode_layoutcommit
  pnfs-obj: report errors and .encode_layoutreturn Implementation.
  pnfs: encode_layoutreturn
  pnfs: layoutret_on_setattr
  pnfs: layoutreturn
  pnfs-obj: osd raid engine read/write implementation
  pnfs: support for non-rpc layout drivers
  pnfs-obj: define per-inode private structure
  pnfs: alloc and free layout_hdr layoutdriver methods
  pnfs-obj: objio_osd device information retrieval and caching
  pnfs-obj: decode layout, alloc/free lseg
  pnfs-obj: pnfs_osd XDR client implementation
  pnfs-obj: pnfs_osd XDR definitions
  pnfs-obj: objlayoutdriver module skeleton
  ...

We had a few drivers move from arch/arm into drivers/gpio, but they
don't actually compile without the ARM platform headers etc.  As a
result they were messing up allyesconfig on x86.

Make them depend on ARM.
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now that ecryptfs_lookup_interpose() is no longer using
ecryptfs_header_cache_2 to read in metadata, the kmem_cache can be
removed and the ecryptfs_header_cache_1 kmem_cache can be renamed to
ecryptfs_header_cache.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

ecryptfs_lookup_interpose() has turned into spaghetti code over the
years. This is an effort to clean it up.

 - Shorten overly descriptive variable names such as ecryptfs_dentry
 - Simplify gotos and error paths
 - Create helper function for reading plaintext i_size from metadata

It also includes an optimization when reading i_size from the metadata.
A complete page-sized kmem_cache_alloc() was being done to read in 16
bytes of metadata. The buffer for that is now statically declared.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

Instead of having the calling functions translate the true/false return
code to either 0 or -EINVAL, have contains_ecryptfs_marker() return 0 or
-EINVAL so that the calling functions can just reuse the return code.

Also, rename the function to ecryptfs_validate_marker() to avoid callers
mistakenly thinking that it returns true/false codes.
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>

Only unlock and d_add() new inodes after the plaintext inode size has
been read from the lower filesystem. This fixes a race condition that
was sometimes seen during a multi-job kernel build in an eCryptfs mount.

https://bugzilla.kernel.org/show_bug.cgi?id=36002Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Reported-by: David <david@unsolicited.net>
Tested-by: David <david@unsolicited.net>

Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (43 commits)
  acer-wmi: support integer return type from WMI methods
  msi-laptop: fix section mismatch in reference from the function load_scm_model_init
  acer-wmi: support to set communication device state by new wmid method
  acer-wmi: allow 64-bits return buffer from WMI methods
  acer-wmi: check the existence of internal 3G device when set capability
  platform/x86:delete two unused variables
  support wlan hotkey on Acer Travelmate 5735Z
  platform-x86: intel_mid_thermal: Fix memory leak
  platform/x86: Fix Makefile for intel_mid_powerbtn
  platform/x86: Simplify intel_mid_powerbtn
  acer-wmi: Delete out-of-date documentation
  acerhdf: Clean up includes
  acerhdf: Drop pointless dependency on THERMAL_HWMON
  acer-wmi: Update MAINTAINERS
  wmi: Orphan ACPI-WMI driver
  tc1100-wmi: Orphan driver
  acer-wmi: does not allow negative number set to initial device state
  platform/oaktrail: ACPI EC Extra driver for Oaktrail
  thinkpad_acpi: Convert printks to pr_<level>
  thinkpad_acpi: Correct !CONFIG_THINKPAD_ACPI_VIDEO warning
  ...

Thomas Gleixner reports that we now have a boot crash triggered by
CONFIG_CPUMASK_OFFSTACK=y:

    BUG: unable to handle kernel NULL pointer dereference at   (null)
    IP: [<c11ae035>] find_next_bit+0x55/0xb0
    Call Trace:
     [<c11addda>] cpumask_any_but+0x2a/0x70
     [<c102396b>] flush_tlb_mm+0x2b/0x80
     [<c1022705>] pud_populate+0x35/0x50
     [<c10227ba>] pgd_alloc+0x9a/0xf0
     [<c103a3fc>] mm_init+0xec/0x120
     [<c103a7a3>] mm_alloc+0x53/0xd0

which was introduced by commit de03c72c ("mm: convert
mm->cpu_vm_cpumask into cpumask_var_t"), and is due to wrong ordering of
mm_init() vs mm_init_cpumask

Thomas wrote a patch to just fix the ordering of initialization, but I
hate the new double allocation in the fork path, so I ended up instead
doing some more radical surgery to clean it all up.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Ingo Molnar <mingo@elte.hu>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] mm: fix mmu_gather rework
  [S390] mm: fix storage key handling

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: more /proc and /sys file support

* 'for-2.6.40' of git://linux-nfs.org/~bfields/linux: (22 commits)
  nfsd: make local functions static
  NFSD: Remove unused variable from nfsd4_decode_bind_conn_to_session()
  NFSD: Check status from nfsd4_map_bcts_dir()
  NFSD: Remove setting unused variable in nfsd_vfs_read()
  nfsd41: error out on repeated RECLAIM_COMPLETE
  nfsd41: compare request's opcnt with session's maxops at nfsd4_sequence
  nfsd v4.1 lOCKT clientid field must be ignored
  nfsd41: add flag checking for create_session
  nfsd41: make sure nfs server process OPEN with EXCLUSIVE4_1 correctly
  nfsd4: fix wrongsec handling for PUTFH + op cases
  nfsd4: make fh_verify responsibility of nfsd_lookup_dentry caller
  nfsd4: introduce OPDESC helper
  nfsd4: allow fh_verify caller to skip pseudoflavor checks
  nfsd: distinguish functions of NFSD_MAY_* flags
  svcrpc: complete svsk processing on cb receive failure
  svcrpc: take advantage of tcp autotuning
  SUNRPC: Don't wait for full record to receive tcp data
  svcrpc: copy cb reply instead of pages
  svcrpc: close connection if client sends short packet
  svcrpc: note network-order types in svc_process_calldir
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm kcopyd: return client directly and not through a pointer
  dm kcopyd: reserve fewer pages
  dm io: use fixed initial mempool size
  dm kcopyd: alloc pages from the main page allocator
  dm kcopyd: add gfp parm to alloc_pl
  dm kcopyd: remove superfluous page allocation spinlock
  dm kcopyd: preallocate sub jobs to avoid deadlock
  dm kcopyd: avoid pointless job splitting
  dm mpath: do not fail paths after integrity errors
  dm table: reject devices without request fns
  dm table: allow targets to support discards internally

* 'nfs-for-2.6.40' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  SUNRPC: Support for RPC over AF_LOCAL transports
  SUNRPC: Remove obsolete comment
  SUNRPC: Use AF_LOCAL for rpcbind upcalls
  SUNRPC: Clean up use of curly braces in switch cases
  NFS: Revert NFSROOT default mount options
  SUNRPC: Rename xs_encode_tcp_fragment_header()
  nfs,rcu: convert call_rcu(nfs_free_delegation_callback) to kfree_rcu()
  nfs41: Correct offset for LAYOUTCOMMIT
  NFS: nfs_update_inode: print current and new inode size in debug output
  NFSv4.1: Fix the handling of NFS4ERR_SEQ_MISORDERED errors
  NFSv4: Handle expired stateids when the lease is still valid
  SUNRPC: Deal with the lack of a SYN_SENT sk->sk_state_change callback...

* git://git.kernel.org/pub/scm/linux/kernel/git/pkl/squashfs-linus:
  Squashfs: Fix sanity check patches on big-endian systems

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI EC: remove redundant code
  ACPI: Add D3 cold state
  ACPI: processor: fix processor_physically_present in UP kernel
  ACPI: Split out custom_method functionality into an own driver
  ACPI: Cleanup custom_method debug stuff
  ACPI EC: enable MSI workaround for Quanta laptops
  ACPICA: Update to version 20110413
  ACPICA: Execute an orphan _REG method under the EC device
  ACPICA: Move ACPI_NUM_PREDEFINED_REGIONS to a more appropriate place
  ACPICA: Update internal address SpaceID for DataTable regions
  ACPICA: Add more methods eligible for NULL package element removal
  ACPICA: Split all internal Global Lock functions to new file - evglock
  ACPI: EC: add another DMI check for ASUS hardware
  ACPI EC: remove dead code
  ACPICA: Fix code divergence of global lock handling
  ACPICA: Use acpi_os_create_lock interface
  ACPI: osl, add acpi_os_create_lock interface
  ACPI:Fix goto flows in thermal-sys