- 12 Jun, 2004 1 commit
-
-
bk://kernel.bkbits.net/acme/net-2.6David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
- 11 Jun, 2004 3 commits
-
-
Arnaldo Carvalho de Melo authored
Will be used by the poor cousins, starting with LLC. Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-
Arnaldo Carvalho de Melo authored
Later patches will make other protocols use sk_wait_data and further generalisations of tcp code will use sk_wait_event. This is again to abstract away more stuff from poor network family writers, like the SOCK_ASYNC_WAITDATA, etc. Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-
bk://kernel.bkbits.net/acme/net-2.6David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
- 10 Jun, 2004 9 commits
-
-
Arnaldo Carvalho de Melo authored
It was already generic, so reflect this in the naming. Later patches will make it be used in other network families.
-
Andreas Dilger authored
-
bk://kernel.bkbits.net/acme/net-2.6David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
Shirley Ma authored
Signed-off-by: Shirley Ma <mashirle@us.ibm.com> Signed-off-by: David S. Miller <davem@redhat.com>
-
Shirley Ma authored
When creating dst entry from ndisc, the dst entry of pmtu is not set, and the outout for this kind of dst entry is set to ip_output2 instead of ip_output. This could lead to send bigger packets through these des entries without fragmentation, and uninitialized pmtu could lead the network unreachable. These problems are easy reproduced when configuring IPSEC for ipv6. IPSEC could pick up dst entry created by ndisc as child des entry if ndisc dst entry generated earlier. If sending bigger packets through IPSEC, the ip output2 will send bigger packets out, the driver will drop these packets on receiver side. Also the dst_entry pmtu will be 0, the network is unreachable. The patch has been tested against 2.6.6. I am not sure why ndisc genereats dst entry with output equal to ip6_output2 not ip6_output. If ndisc sends bigger packets, it will break also. Signed-off-by: Shirley Ma <mashirle@us.ibm.com> Signed-off-by: David S. Miller <davem@redhat.com>
-
David S. Miller authored
-
Jesper Juhl authored
-
Clay Haapala authored
Below is the patch, against 2.6.7-rc2, to fix crypto/digest.c to do multiple kmap()/kunmap() for scatterlist entries which have a size greater than a single page, originally found and fixed by N.C.Krishna Murthy <krmurthy@cisco.com>. Signed-off-by: Clay Haapala <chaapala@cisco.com> Signed-off-by: David S. Miller <davem@redhat.com>
-
David S. Miller authored
1) Make window clamp follow receive buffer growth so it does not limit window advertisements. Noticed by John Heffner and Stephen Hemminger. 2) Fix rcvmem calculation such that tcp_adv_win_scale is taken into account.
-
- 09 Jun, 2004 27 commits
-
-
Arnaldo Carvalho de Melo authored
This makes the best practices already in place in bluetooth and tcp/ip available for all protocols, i.e. references must be managed when associating timers with struct sock instances, also makes the code a bit more clean. Signed-off-by: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
-
Hideaki Yoshifuji authored
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
bk://kernel.bkbits.net/davem/sparc-2.6Linus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
bk://kernel.bkbits.net/acme/net-2.6David S. Miller authored
into nuts.davemloft.net:/disk1/BK/net-2.6
-
David S. Miller authored
-
Andrew Morton authored
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@redhat.com>
-
David S. Miller authored
into nuts.davemloft.net:/disk1/BK/sparc-2.6
-
Oleg Nesterov authored
dup_mmap() unnecessarily tries to account for memory of the vma's it has created if it fails in the middle. However, that's pointless (and wrong), since the exit_mmap() path called through mmput() will do so anyway in the failure path. Just remove the bogus un-accounting code.
-
bk://cifs.bkbits.net/linux-2.5cifsLinus Torvalds authored
into ppc970.osdl.org:/home/torvalds/v2.6/linux
-
Randy Dunlap authored
Add __user annotations to kernel/sysctl.c to satisfy sparse for !CONFIG_SYSCTL, !CONFIG_PROC_FS. Signed-off-by: Randy Dunlap <rddunlap@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
It puts two 2kB temp areas on the stack, which is guaranteed to overflow a 4kB stack if that path is ever taken. Both marked in the source, and both should be easy to fix but need testing. Found by Jörn Engel.
-
Andrew Morton authored
From: Herbert Xu <herbert@gondor.apana.org.au> The recent change to vga16fb's memory mapping that you partially reverted is still broken. In particular, it's setting fix.mem_start to a virtual address on i386. The value of fix.mem_start is meant to be physical. We could simply apply virt_to_phys to it, but somehow I doubt that is what it's meant to do on arm. So until we hear from someone who knows how it works on arm, let's just revert this change. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
Randy Dunlap <rddunlap@osdl.org> points out that sparse warns about the test of an undefined preprocessor identifier. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: Andy Whitcroft <apw@shadowen.org> The sysctl interfaces for updating the uts entries such as hostname and domainname are using the wrong length for these buffers; they are hard coded to 64. Although safe, this artifically limits the size of these fields to one less than the true maximum. This generates an inconsistency between the various methods of update for these fields. # hostname 12345678901234567890123456789012345678901234567890123456789012345 hostname: name too long # hostname 1234567890123456789012345678901234567890123456789012345678901234 # hostname 1234567890123456789012345678901234567890123456789012345678901234 # sysctl -w kernel.hostname=1234567890123456789012345678901234567890123456789012345678901234567890 kernel.hostname = 1234567890123456789012345678901234567890123456789012345678901234567890 # hostname 123456789012345678901234567890123456789012345678901234567890123 # The error originates from the fact the handler for strings (proc_dostring) already allows for the string terminator. This patch corrects the limit, taking the oppotunity to convert to use of sizeof(). Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: john stultz <johnstul@us.ibm.com> In testing for SLES9, we ran across a bug caused by userspace apps poking the PIT which caused bad values to be read by the kernel. This would then trigger the lost tick detection code with insane values and would then break the SCSI subsystem. This patch includes the PIT sanity check from the TSC timesource into the cyclone timesource code, which catches the bad case described above and resolves the issue. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: "Anil" <anil.s.keshavamurthy@intel.com> We don't need lock_cpu_hotplug()/unlock_cpu_hotplug for singlethreaded workqueues. Signed-off-by: Anil Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: Martin Schwidefsky <schwidefsky@de.ibm.com> This patch adds support for 6 system call arguments on s390. The first exploiter of this will be the sys_futex system call for the FUTEX_CMP_REQUEUE operation. The idea is simple: use register %r7 for the 6th argument. This can be extended to 7/8/9/... arguments if there ever will be the need for it. To call the system call function in the kernel the additional arguments needs to get stored on the stack. 8 bytes are added to the head of struct pt_regs. %r7 is stored to the additional field for all system calls. The store is hidden in a address-generation-interlock slot, it doesn't slow down the system call path. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: Jens Axboe <axboe@suse.de> cdrom_has_defect_mgt() has the same ->data_len bug - the length field is not total length, but the length following that field. So it should be + 4, not + 8. However, just kill the length check. Comparison of feature_code provides enough check. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: NeilBrown <neilb@cse.unsw.edu.au> This condtion on this loop is primarily to avoid the loop if it doesn't appear to be needed. However it optimises a little too much and there is a case where it skips the loop when it is really needed. This patch fixes it. This is the raid6 version of the recent raid5 resync bugfix. Signed-off-by: Neil Brown <neilb@cse.unsw.edu.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Recent syscall stubs cleanup broke alpha, as it has its own version of sys_rt_sigaction(). This defines __ARCH_WANT_SYS_RT_SIGACTION for all architectures except alpha, sparc and sparc64. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: Andi Kleen <ak@suse.de> UDF spews out lots of debugging information by default. Disable that, since it doesn't make too much sense for a production kernel. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: Andi Kleen <ak@suse.de> This printk is printed by genericarch when your machine is no es7000. Most people don't care about that. Remove it. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: Francois Romieu <romieu@fr.zoreil.com> - just say no to numbered labels; - pci_enable_device can fail so setup_pci_dev() must return a value; - propagate existing error codes when possible in do_pci_device() - missing pci_disable_device here and there. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: Peter Korsgaard <jacmet@sunsite.dk> Vertical retrace is in lines, not pixels. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
We need to take journal_lock_updates() while remounting r/o to prevent a new transaction starting while journal_flush() is running. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-
Andrew Morton authored
From: Christoph Hellwig <hch@lst.de> drivers/block/paride/epat.c support two slightly different protocol variants. Currently it's compile-time selected by CONFIG_PARIDE_EPATC8, but this patch adds a epatc8 module option to allow runtime selection. CONFIG_PARIDE_EPATC8 stays for now but I'd like to kill it int 2.7. The basic patch is from the Debian kernel package (Author unknown) but I reworked it a bit. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
-