- 04 Aug, 2016 1 commit
-
-
Chris Wilson authored
If the fbdev probing fails, and in our error path we fail to clear the dev_priv->fbdev, then we can try and use a dangling fbdev pointer, and in particular a NULL fb. This could also happen in pathological cases where we try to operate on the fbdev prior to it being probed. Reported-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1468431285-28264-2-git-send-email-chris@chris-wilson.co.ukReviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Mika Kuoppala <mika.kuoppala@intel.com> (cherry picked from commit 6bc26542) Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
- 29 Jul, 2016 2 commits
-
-
Ville Syrjälä authored
SNB (and IVB too I suppose) starts to misbehave if the GPU gets stuck in an infinite batch buffer loop. The GPU apparently hogs something critical and CPUs start to lose interrupts and whatnot. We can keep the system limping along by unmasking some interrupts in GEN6_PMINTRMSK. The EI up interrupt has been previously chosen for that task, so let's never mask it. v2: s/gen6_rps_pm_mask/gen6_sanitize_rps_pm_mask/ (Chris) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93122Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Ville Syrjälä authored
Bspec tells us to keep bashing the PCU for up to 3ms when trying to inform it about an upcoming change in the cdclk frequency. Currently we only keep at it for 15*10usec (+ whatever delays gets added by the sandybridge_pcode_read() itself). Let's change the limit to 3ms. I decided to keep 10 usec delay per iteration for now, even though the spec doesn't really tell us to do that. Cc: stable@vger.kernel.org Fixes: 5d96d8af ("drm/i915/skl: Deinit/init the display at suspend/resume") Cc: David Weinehall <david.weinehall@intel.com> Signed-off-by:
David Weinehall <david.weinehall@intel.com> Reviewed-by:
-
- 25 Jul, 2016 4 commits
-
-
Mika Kuoppala authored
Add this workaround to prevent hang when in place compression is used. References: HSD#2135774 Cc: stable@vger.kernel.org Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 4ba9c1f7) Signed-off-by:
-
Rodrigo Vivi authored
This reverts commit 041824ee. We have latency issues that might impact the performance: #96606. and hangs and loading issues on resume after S4: #96526. This is also blocking a platform milestone so let's disable this for now while we make sure we don't have any more loading issue, or related basic hangs and it pass BAT for real in all platofmrs. In case BAT is wrong let's first fix BAT before re-enable it here. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96606 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Christophe Prigent <christophe.prigent@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Imre Deak authored
Setting a write-back cache policy in the MOCS entry definition also implies snooping, which has a considerable overhead. This is unexpected for a few reasons: - From user-space's point of view since it didn't want a coherent surface (it didn't set the buffer as such via the set caching IOCTL). - There is a separate MOCS entry field for snooping (which we never set). - This MOCS table is about caching in (e)LLC and there is no (e)LLC on BXT. There is a separate table for L3 cache control. Considering the above the current behavior of snooping looks like an unintentional side-effect of the WB setting. Changing it to be LLC-UC gets rid of the snooping without any ill-effects. For a coherent surface the application would use a separate MOCS entry at index 1 and call the set caching IOCTL to setup the PTE entries for the corresponding buffer to be snooped. In the future we could also add a new MOCS entry for coherent surfaces. This resulted in 70% improvement in synthetic texturing benchmarks. Kudos to Valtteri Rantala, Eero Tamminen and Michael T Frederick and Ville who helped to narrow the source of problem to the kernel and to the snooping behaviour in particular. With a follow-up change to adjust the 3rd entry value igt/gem_mocs_settings is passing after this change. v2: - Rebase on v2 of patch 1/2. v3: - Set the entry as LLC uncached instead of PTE-passthrough. This way we also keep snooping disabled, but we also make the cacheability/ coherency setting indepent of the PTE which is managed by the kernel. (Chris) CC: Rong R Yang <rong.r.yang@intel.com> CC: Yakui Zhao <yakui.zhao@intel.com> CC: Valtteri Rantala <valtteri.rantala@intel.com> CC: Eero Tamminen <eero.t.tamminen@intel.com> CC: Michael T Frederick <michael.t.frederick@intel.com> CC: Ville Syrjälä <ville.syrjala@linux.intel.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Imre Deak <imre.deak@intel.com> Acked-by:
Zhao Yakui <yakui.zhao@intel.com> Tested-by:
Rong R Yang <rong.r.yang@intel.com> Reviewed-by:
-
Imre Deak authored
Use named struct initializers for clarity. Also fix the target cache definition to reflect its role in GEN9 onwards. On GEN8 a TC value of 0 meant ELLC but on GEN9+ it means the TC and LRU controls are taken from the PTE. No functional change, igt/gem_mocs_settings still passing after this change. v2: (Chris) - Add back the hexa literals for the entries. Add note that igt/gem_mocs_settings still passes. CC: Rong R Yang <rong.r.yang@intel.com> CC: Yakui Zhao <yakui.zhao@intel.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
- 19 Jul, 2016 5 commits
-
-
Bob Paauwe authored
The i915 driver is now using atomic properties and atomic commit to handle the legacy set gamma IOCTL. However, if the driver is configured without atomic (nuclear_pageflip = false), it won't update the legacy properties for degamma_lut, gamma_lut and ctm leaving them out of sync with the atomic version of the properties. Until the driver is full atomic, make sure we update the non-atomic version of the properties. v2: Update the comment with a FIXME. (Daniel) v3: Update arguments of the gamma_set vfunc (Lionel) v4: Fixed vfunc prototype (Lionel) igt-testcase: kms_pipe_color / legacy-gamma-reset-pipeX Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: stable@vger.kernel.org #v4.7 Signed-off-by:
Bob Paauwe <bob.j.paauwe@intel.com> Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by:
-
Lyude authored
Unfortunately, there's two situations where we lose hpd right now: - Runtime suspend - When we've shut off all of the power wells on Valleyview/Cherryview While it would be nice if this didn't cause issues, this has the ability to get us in some awkward states where a user won't be able to get their display to turn on. For instance; if we boot a Valleyview system without any monitors connected, it won't need any of it's power wells and thus shut them off. Since this causes us to lose HPD, this means that unless the user knows how to ssh into their machine and do a manual reprobe for monitors, none of the monitors they connect after booting will actually work. Eventually we should come up with a better fix then having to enable polling for this, since this makes rpm a lot less useful, but for now the infrastructure in i915 just isn't there yet to get hpd in these situations. Changes since v1: - Add comment explaining the addition of the if (!mode_config->poll_running) in intel_hpd_init() - Remove unneeded if (!dev->mode_config.poll_enabled) in i915_hpd_poll_init_work() - Call to drm_helper_hpd_irq_event() after we disable polling - Add cancel_work_sync() call to intel_hpd_cancel_work() Changes since v2: - Apparently dev->mode_config.poll_running doesn't actually reflect whether or not a poll is currently in progress, and is actually used for dynamic module paramter enabling/disabling. So now we instead keep track of our own poll_running variable in dev_priv->hotplug - Clean i915_hpd_poll_init_work() a little bit Changes since v3: - Remove the now-redundant connector loop in intel_hpd_init(), just rely on intel_hpd_poll_enable() for setting connector->polled correctly on each connector - Get rid of poll_running - Don't assign enabled in i915_hpd_poll_init_work before we actually lock dev->mode_config.mutex - Wrap enabled assignment in i915_hpd_poll_init_work() in READ_ONCE() for doc purposes - Do the same for dev_priv->hotplug.poll_enabled with WRITE_ONCE in intel_hpd_poll_enable() - Add some comments about racing not mattering in intel_hpd_poll_enable Changes since v4: - Rename intel_hpd_poll_enable() to intel_hpd_poll_init() - Drop the bool argument from intel_hpd_poll_init() - Remove redundant calls to intel_hpd_poll_init() - Rename poll_enable_work to poll_init_work - Add some kerneldoc for intel_hpd_poll_init() - Cross-reference intel_hpd_poll_init() in intel_hpd_init() - Just copy the loop from intel_hpd_init() in intel_hpd_poll_init() Changes since v5: - Minor kerneldoc nitpicks Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Lyude <cpaul@redhat.com> Signed-off-by:
-
Lyude authored
One of the things preventing us from using polling is the fact that calling valleyview_crt_detect_hotplug() when there's a VGA cable connected results in sending another hotplug. With polling enabled when HPD is disabled, this results in a scenario like this: - We enable power wells and reset the ADPA - output_poll_exec does force probe on VGA, triggering a hpd - HPD handler waits for poll to unlock dev->mode_config.mutex - output_poll_exec shuts off the ADPA, unlocks dev->mode_config.mutex - HPD handler runs, resets ADPA and brings us back to the start This results in an endless irq storm getting sent from the ADPA whenever a VGA connector gets detected in the middle of polling. Somewhat based off of the "drm/i915: Disable CRT HPD around force trigger" patch Ville Syrjälä sent a while back Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Lyude authored
While VGA hotplugging worked(ish) before, it looks like that was mainly because we'd unintentionally enable it in valleyview_crt_detect_hotplug() when we did a force trigger. This doesn't work reliably enough because whenever the display powerwell on vlv gets disabled, the values set in VLV_ADPA get cleared and consequently VGA hotplugging gets disabled. This causes bugs such as one we found on an Intel NUC, where doing the following sequence of hotplugs: - Disconnect all monitors - Connect VGA - Disconnect VGA - Connect HDMI Would result in VGA hotplugging becoming disabled, due to the powerwells getting toggled in the process of connecting HDMI. Changes since v3: - Expose intel_crt_reset() through intel_drv.h and call that in vlv_display_power_well_init() instead of encoder->base.funcs->reset(&encoder->base); Changes since v2: - Use intel_encoder structs instead of drm_encoder structs Changes since v1: - Instead of handling the register writes ourself, we just reuse intel_crt_detect() - Instead of resetting the ADPA during display IRQ installation, we now reset them in vlv_display_power_well_init() Cc: stable@vger.kernel.org Acked-by: -
Lyude authored
This lets call intel_crt_reset() in contexts where IRQs are disabled and as such, can't hold the locks required to work with the connectors. Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
-
- 14 Jul, 2016 2 commits
-
-
Ville Syrjälä authored
Prior to gen6 we didn't have per-ring IMR registers, which means that since commit 61ff75ac ("drm/i915: Simplify enabling user-interrupts with L3-remapping") we're now masking off all interrupts when init_render_ring() gets called. That's rather rude. Let's limit the ring IMR frobbing to machines that actually have the per-ring IMR registers. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 61ff75ac ("drm/i915: Simplify enabling user-interrupts with L3-remapping") Signed-off-by:
-
Chris Wilson authored
Never go to sleep waiting on the GPU without first ensuring that we will get woken up. We have a choice of queuing the hangcheck before every schedule() or the first time we wakeup. In order to simply accommodate both the signaler and the ordinary waiter, move the queuing to the common point of enabling the irq. We lose the paranoid safety of ensuring that the hangcheck is active before the sleep, but avoid code duplication (and redundant hangcheck queuing). Testcase: igt/prime_busy Fixes: c81d4613 ("drm/i915: Convert trace-irq to the breadcrumb waiter") Signed-off-by:
-
- 11 Jul, 2016 1 commit
-
-
Daniel Vetter authored
Signed-off-by:
-
- 10 Jul, 2016 2 commits
-
-
Chris Wilson authored
igt/prime_vgem (and others) depends upon VGEM so automatically select it when enabling i915 debugging. Signed-off-by:
Matthew Auld <matthew.auld@intel.com>
-
Chris Wilson authored
igt/pm_rpm depends upon /dev/*/msr so automatically select it when enabling i915 debugging. Signed-off-by:
-
- 08 Jul, 2016 1 commit
-
-
Chris Wilson authored
One of the numerous VT-d workarounds we require is that the display hardware reads past the end of the buffer triggering VT-d faults. This is acknowledged in the code as being safe "since we fill the unused portions of the GGTT with the scratch page". Alas, that is no longer always true and so we trigger DMAR read faults. Skylake also requires another workaround to avoid mixing VT-d and unpopulated PTE, and so there we also need to ensure we fill unused entries with the scratch page. Reported-by:
Mike Lothian <mike@fireburn.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96584 Fixes: f7770bfd ("drm/i915: Skip clearing the GGTT on full-ppgtt systems") Signed-off-by:
-
- 07 Jul, 2016 13 commits
-
-
Rodrigo Vivi authored
Some Kabylake SKUs are going to use Kabypoint PCH. It is mainly for Halo and DT ones. >From our specs it doesn't seem that KBP brings any change on the display south engine. So let's consider this as a continuation of SunrisePoint, i.e., SPT+. Since it is easy to get confused by a letter change: KBL = Kabylake - CPU/GPU codename. KBP = Kabypoint - PCH codename. Signed-off-by:
Ander Conselvan de Oliveira <conselvan2@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96826 Link: http://patchwork.freedesktop.org/patch/msgid/1467418032-15167-1-git-send-email-rodrigo.vivi@intel.comSigned-off-by:
-
Tim Gore authored
This patch applies WaMediaPoolStateCmdInWABB which fixes a problem with the restoration of thread counts on resuming from RC6. References: HSD#2137167 Signed-off-by:
Tim Gore <tim.gore@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1467709290-5941-1-git-send-email-tim.gore@intel.com
-
Ville Syrjälä authored
Move the encoder cloning check to happen earlier in the modeset. The main benefit will be that the debug output from a failed modeset will be less confusing as output_types can not indicate an invalid configuration during the later computation stages. For instance, what happened to me was kms_setmode was attempting one of its invalid cloning checks during which it asked for DP+VGA cloning on HSW. In this case the DP .compute_config() was executed after the FDI .compute_config() leaving the DP link clock (1.62 in this case) in port_clock, and then later the FDI BW computation tried to use that as the FDI link clock (which should always be 2.7). 1.62 x 2 wasn't enough for the mode it was trying to use, and so it ended up rejecting the modeset, not because of an invalid cloning configuration, but because of supposedly running out of FDI bandwidth. Took me a while to figure out what had actually happened. Signed-off-by:
-
Ville Syrjälä authored
With the output_types bitmask there's no need to loop through the encoders anymore when checking for HDMI+non-HDMI cloning. v2: Use output_types bitmask v3: Fix the logic to really check that there are no non-HDMI encoders Signed-off-by:
-
Ville Syrjälä authored
has_dsi_encoder was introduced to indicate that the pipe is driving a DSI encoder. Now that we have the output_types bitmask that can tell us the same thing, let's just kill has_dsi_encoder. v2: Rebase, handle BXT DSI transcoder, rewrote commit message Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ville Syrjälä authored
INTEL_OUTPUT_DISPLAYPORT hsa been bugging me for a long time. It always looks out of place besides INTEL_OUTPUT_EDP and INTEL_OUTPUT_DP_MST. Let's just rename it to INTEL_OUTPUT_DP. v2: Rebase Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
Ville Syrjälä authored
A bunch of places still look for DP encoders manually. Just call intel_crtc_has_dp_encoder(). Note that many of these places don't look for EDP or DP_MST, but it's still fine to replace them because * for audio we don't enable audio on eDP anyway * the code that lack DP MST check is only for plaforms that don't support MST anyway v2: Rebase Signed-off-by:
-
Ville Syrjälä authored
Use the new output_types bitmask instead of has_dp_encoder. To make it less oainlful provide a small helper (intel_crtc_has_dp_encoder()) to do the bitsy stuff. v2: Rebase Signed-off-by:
-
Ville Syrjälä authored
Since we now have the output_types bitmaks in the crtc state, there's no need to iterate through all the encoders to see if an LVDS or SDVO/HDMI encoder might be present. Signed-off-by:
-
Ville Syrjälä authored
With the introduction of the output_types mask, intel_pipe_has_type() and intel_pipe_will_have_type() are basically the same thing. Replace them with a new intel_crtc_has_type() (identical to intel_pipe_will_have_type() actually). v2: Rebase v3: Make intel_crtc_has_type() static inline (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Ville Syrjälä authored
Rather than looping through encoders to see which encoder types are being driven by the pipe, add an output_types bitmask into the crtc state and populate it prior to compute_config and during state readout. v2: Determine output_types before .compute_config() hooks are called Signed-off-by:
-
Ville Syrjälä authored
Now that eDP encoders won't have can_mst==true, we can throw out the encoder type checks from the MST suspend/resume paths. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Ville Syrjälä authored
If we've determined that the encoder is eDP, we shouldn't try to use MST on it. Or at least the code doesn't seem to expect that since there are some type==DP checks in the MST code. Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
-
- 06 Jul, 2016 4 commits
-
-
Dave Gordon authored
Rather than using wait_for_atomic() when chacking for a response from the GuC, we can get the effect of a hybrid spin/sleep wait by breaking it into two stages. First, spin-wait for up to 10us to minimise latency for "quick" commands; then, if that times out, sleep-wait for up 10ms (the maximum allowed for a "slow" command). Being able to do this depends on the recent patch 18f4b843 drm/i915: Use atomic waits for short non-atomic ones and is similar to the hybrid approach in 1758b90e drm/i915: Use a hybrid scheme for fast register waits (although we can't use that as-is, because that interface doesn't quite match what we need here). Signed-off-by:
Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
As we inspect both the tasklet (to check for an active bottom-half) and set the irq-posted flag at the same time (both in the interrupt handler and then in the bottom-halt), group those two together into the same cacheline. (Not having total control over placement of the struct means we can't guarantee the cacheline boundary, we need to align the kmalloc and then each struct, but the grouping should help.) v2: Try a couple of different names for the state touched by the user interrupt handler. Signed-off-by:
-
Chris Wilson authored
Following on from the scenario Tvrtko envisioned to explain a hard-to-hit race with multiple first waiters, we could also then race in the __i915_request_irq_complete() and the bottom-half may miss the vital irq-seqno barrier and so go to sleep not noticing their seqno is complete. v2: unlock, not double lock the rcu_read_lock. Fixes: 3d5564e9 ("drm/i915: Only apply one barrier after...") Signed-off-by:
-
Chris Wilson authored
After assigning ourselves as the new bottom-half, we must perform a cursory check to prevent a missed interrupt. Either we miss the interrupt whilst programming the hardware, or if there was a previous waiter (for a later seqno) they may be woken instead of us (due to the inherent race in the unlocked read of b->tasklet in the irq handler) and so we miss the wake up. Spotted-by:
-
- 05 Jul, 2016 5 commits
-
-
Chris Wilson authored
Since drm_i915_private is now a subclass of drm_device we do not need to chase the drm_i915_private->dev backpointer and can instead simply access drm_i915_private->drm directly. text data bss dec hex filename 1068757 4565 416 1073738 10624a drivers/gpu/drm/i915/i915.ko 1066949 4565 416 1071930 105b3a drivers/gpu/drm/i915/i915.ko Created by the coccinelle script: @@ struct drm_i915_private *d; identifier i; @@ ( - d->dev->i + d->drm.i | - d->dev + &d->drm ) and for good measure the dev_priv->dev backpointer was removed entirely. Signed-off-by:
-
Chris Wilson authored
If we have a drm_device, we have a drm_i915_private (since they are the same). Signed-off-by:
-
Chris Wilson authored
As we can just directly use drm_dev->drm.dev, we do not need the drm_dev->dev backpointer anymore and can also loose the warning about order of __i915_printk() and our initialisation (which is now always safe). Signed-off-by:
-
Chris Wilson authored
Let's reclaim a few hundred lines from i915_drv.c by splitting out the runtime configuration of the "constant" dev_priv->info. Signed-off-by:
-
Chris Wilson authored
As we only ever keep the first error state around, we can avoid some work that can be quite intrusive if we don't record the error the second time around. This does move the race whereby the user could discard one error state as the second is being captured, but that race exists in the current code and we hope that recapturing error state is only done for debugging. Note that as we discard the error state for simulated errors, igt that exercise error capture continue to function. Signed-off-by:
-
