- 23 Nov, 2018 32 commits
-
-
Rui Miguel Silva authored
Swapping the order between v4l2 subdevice registration and checking chip id in b7a41762 ("media: ov2680: don't register the v4l2 subdevice before checking chip ID") makes the mode restore to use the sensor controls before they are set, so move the mode restore call to s_power after the handler setup for controls is done. This remove also the need for the error code path in power on function. Fixes: b7a41762 ("media: ov2680: don't register the v4l2 subdevice before checking chip ID") Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Sakari Ailus authored
Document that changing the frame interval has no effect on frame size. While this was the assumption in the API, it was not documented as such. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Maxime Ripard authored
The first device that used that IP was the A31. Add it to our list of compatibles. Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Maxime Ripard authored
The H3 has a slightly different CSI controller (no BT656, no CCI) which looks a lot like the original A31 controller. Add a compatible for the A31, and more specific compatible the for the H3 to be used in combination for the A31. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
There are a few other coding style issues reported by checkpatch while in --strict mode. Fix the ones that make sense. Signed-off-by: -
Mauro Carvalho Chehab authored
Make checkpatch.pl happier by running it on strict mode and using the --fix-inline to solve some issues. Signed-off-by: -
Yong Deng authored
Allwinner V3s SoC features a CSI module with parallel interface. This patch implement a v4l2 framework driver for it. Reviewed-by:
Yong Deng <yong.deng@magewell.com> Signed-off-by:
-
Yong Deng authored
Add binding documentation for Allwinner V3s CSI. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Akinobu Mita authored
This adds log_status ioctl and event interface for ov772x's v4l2 controls. Cc: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Akinobu Mita authored
This adds log_status ioctl and event interface for ov7670's v4l2 controls. Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Akinobu Mita authored
This adds log_status ioctl and event interface for ov5640's v4l2 controls. Cc: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Akinobu Mita authored
This adds log_status ioctl and event interface for ov2640's v4l2 controls. Signed-off-by:
-
Akinobu Mita authored
The ov2640 has the test pattern generator features. This makes use of it through V4L2_CID_TEST_PATTERN control. [Sakari Ailus: Use "Eight Vertical Colour Bars" as the second manu entry] Signed-off-by:
-
Akinobu Mita authored
The mt9m111 has special camera effects feature. This makes use of it through V4L2_CID_COLORFX control. Signed-off-by:
-
Akinobu Mita authored
This adds log_status ioctl and event interface for mt9m111's v4l2 controls. Signed-off-by:
-
Chen, JasonX Z authored
change bayer order when using test pattern mode. remove test pattern mapping method [Sakari Ailus: Drop extra added newline] Signed-off-by:
Chen, JasonX Z <jasonx.z.chen@intel.com> Signed-off-by:
-
Sakari Ailus authored
The NATIVE_SIZE target is documented for mem2mem devices but no driver has ever apparently used it. It may be never needed; remove it for now. Suggested-by:
-
Nathan Chancellor authored
Clang warns when a variable is assigned to itself: drivers/media/i2c/imx214.c:695:13: error: explicitly assigning value of variable of type 'const struct reg_8 *' to itself [-Werror,-Wself-assign] for (table = table; table->addr != IMX214_TABLE_END ; table++) { ~~~~~ ^ ~~~~~ 1 error generated. Signed-off-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Dafna Hirschfeld authored
Add support for formats with 4 planes: V4L2_PIX_FMT_ABGR32, V4L2_PIX_FMT_ARGB32. Also add alpha plane related flags to the header of the encoded file. Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> [hans.verkuil@cisco.com: fix line-too-long warnings] Signed-off-by:
-
Dafna Hirschfeld authored
Add support for single plane greyscale format V4L2_PIX_FMT_GREY. Also change the header of the encoded file to include the number of components. Signed-off-by:
-
Dafna Hirschfeld authored
Add fields to the structs `fwht_raw_frame`, `v4l2_fwht_pixfmts` to support various number of planes - formats with alpha channel that have 4 planes and greyscale formats that have 1 plane. Signed-off-by:
-
Hans Verkuil authored
ENUM_FMT is valid for SDR and META buffer types as well. Signed-off-by:
-
Hans Verkuil authored
Instead of setting device_caps/capabilities in the querycap ioctl, set it in struct video_device instead. Signed-off-by:
-
Eric Biggers authored
v4l2_ioctls[] is never modified, so mark it 'const'. This way it gets placed in .rodata. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Malathi Gottam authored
When the client doesn't explicitly set any GOP size, current default value is low and overshoots bitrate beyond tolerance. Hence default value is modified so as to have intra period of 1sec. Signed-off-by:
Malathi Gottam <mgottam@codeaurora.org> Acked-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
Julia Lawall authored
The vb2_ops structure can be const as it is only stored in the ops field of a vb2_queue structure and this field is const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Acked-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
-
Alexey Khoroshilov authored
of_parse_phandle() returns the device node with refcount incremented. There are two nodes that are used temporary in mtk_vcodec_init_enc_pm(), but their refcounts are not decremented. The patch adds one of_node_put() and fixes returning error codes. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Akinobu Mita authored
AMG88xx has a register for setting frame rate 1 or 10 FPS. This adds support changing frame interval. Reference specifications: https://docid81hrs3j1.cloudfront.net/medialibrary/2017/11/PANA-S-A0002141979-1.pdfAcked-by:
-
Akinobu Mita authored
Now the equivalent of FRACT_CMP() is added in v4l2 common internal API header. Cc: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by:
-
Akinobu Mita authored
Add macro to compare two v4l2_fract values in v4l2 common internal API. The same macro FRACT_CMP() is used by vivid and bcm2835-camera. This just renames it to V4L2_FRACT_COMPARE in order to avoid namespace collision. Cc: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by:
-
Akinobu Mita authored
Use regmap for i2c register access. This simplifies register accesses and chooses suitable access commands based on the functionality that the adapter supports. Acked-by:
-
Akinobu Mita authored
The video device release() callback for video-i2c driver frees the whole struct video_i2c_data. If there is no user left for the video device when video_unregister_device() is called, the release callback is executed. However, in video_i2c_remove() some fields (v4l2_dev, lock, and queue_lock) in struct video_i2c_data are still accessed after video_unregister_device() is called. This fixes the use after free by moving the code from video_i2c_remove() to the release() callback. Fixes: 5cebaac6 ("media: video-i2c: add video-i2c driver") Reviewed-by:
-
- 22 Nov, 2018 8 commits
-
-
Sean Young authored
If userspace has an open file descriptor on the rc input device or lirc device when rc_unregister_device() is called, then the rc close() is never called. This ensures that the receiver is turned off on the nuvoton-cir driver during shutdown. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
The strcpy() function is being deprecated. Replace it by the safer strscpy(). Signed-off-by:
-
Sean Young authored
This fixes an oops in ir_lirc_scancode_event(). BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 9 PID: 27687 Comm: kworker/9:2 Tainted: P OE 4.18.12-200.fc28.x86_64 #1 Hardware name: Supermicro C7X99-OCE-F/C7X99-OCE-F, BIOS 2.1a 06/15/2018 Workqueue: events pulse8_irq_work_handler [pulse8_cec] RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0 [rc_core] Code: 8d ae b4 07 00 00 49 81 c6 b8 07 00 00 53 e8 4a df c3 d5 48 89 ef 49 89 45 00 e8 4e 84 41 d6 49 8b 1e 49 89 c4 4c 39 f3 74 58 <8b> 43 38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49 RSP: 0018:ffffaa10e3c07d58 EFLAGS: 00010017 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000018 RDX: 0000000000000001 RSI: 00316245397fa93c RDI: ffff966d31c8d7b4 RBP: ffff966d31c8d7b4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: ffffaa10e3c07e28 R12: 0000000000000002 R13: ffffaa10e3c07d88 R14: ffff966d31c8d7b8 R15: 0000000000000073 FS: 0000000000000000(0000) GS:ffff966d3f440000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000038 CR3: 00000009d820a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ir_do_keydown+0x75/0x260 [rc_core] rc_keydown+0x54/0xc0 [rc_core] cec_received_msg_ts+0xaa8/0xaf0 [cec] process_one_work+0x1a1/0x350 worker_thread+0x30/0x380 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 Modules linked in: rc_tt_1500 dvb_usb_dvbsky dvb_usb_v2 uas usb_storage fuse vhost_net vhost tap xt_CHECKSUM iptable_mangle ip6t_REJECT nf_reject_ipv6 tun 8021q garp mrp xt_nat macvlan xfs devlink ebta si2157 si2168 cx25840 cx23885 kvm altera_ci tda18271 joydev ir_rc6_decoder rc_rc6_mce crct10dif_pclmul crc32_pclmul ghash_clmulni_intel intel_cstate intel_uncore altera_stapl m88ds3103 tveeprom cx2341 mxm_wmi igb crc32c_intel megaraid_sas dca i2c_algo_bit wmi vfio_pci irqbypass vfio_virqfd vfio_iommu_type1 vfio i2c_dev CR2: 0000000000000038 Cc: <stable@vger.kernel.org> # v4.16+ Signed-off-by:
-
Sean Young authored
The function get_key_hvr1110 can only decode rc5, however this is a standard hauppauge z8f0811 which can decode rc6 as well. Use get_key_haup_xvr() instead. Tested on a HVR 1110. Signed-off-by:
-
Sean Young authored
Before this patch, the rc name is truncated to: saa7134 IR (Hauppauge WinTV-HVR Now it is: Hauppauge WinTV-HVR1150 ATSC/QAM-Hybrid Signed-off-by:
-
Sean Young authored
Previously, the code would loop for each of the 40 bits. Now it will branch for each edge in the IR, which will be much less. Signed-off-by:
-
Sean Young authored
The xbox dvd remote sends 24 bits, the first 12 bits are repeated and inverted so only 12 bits are used. The upper 4 bits can be read at offset 3. Ensure we pass this to rc-core and update the keymap accordingly. Tested-by:
Benjamin Valentin <benpicco@googlemail.com> Signed-off-by:
-
Benjamin Valentin authored
The Xbox DVD Movie Playback Kit is a USB dongle with an IR remote for the Original Xbox. Historically it has been supported by the out-of-tree lirc_xbox driver, but this one has fallen out of favour and was just dropped from popular Kodi (formerly XBMC) distributions. This driver is heavily based on the ati_remote driver where all the boilerplate was taken from - I was mostly just removing code. Signed-off-by:
-
