Commits · c496fa6bd5324ddce11e5e42670618ffb4d8f58d · nexedi / linux

19 Nov, 2010 17 commits

ARM: mx3/mx35_3ds: Add watchdog support · c496fa6b

Uwe Kleine-König authored Nov 16, 2010

This bases on a patch by Fabio Estevam who added the device before it
was allocated dynamically.

Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

c496fa6b

ARM: mx3: dynamically allocate imx-keypad devices · d690b4c4
Uwe Kleine-König authored Nov 16, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
d690b4c4
ARM: mx3: dynamically allocate imx2-wdt devices · 742269e2
Uwe Kleine-König authored Nov 15, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
742269e2
ARM: mx3: dynamically allocate mxc-ehci devices · 2d58de28
Uwe Kleine-König authored Nov 15, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
2d58de28

ARM: mx3: dynamically allocate fsl-usb2-udc devices · 9e1dde33

Uwe Kleine-König authored Nov 12, 2010

While adapting the #defines for this I noticed that the offset
used for USB HS on i.MX35 differs from the documented offset.
I kept the working offset and commented that the documentation
differs.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

9e1dde33

ARM: mx3: dynamically allocate mxc_rnga devices · fed3d35b
Uwe Kleine-König authored Nov 12, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
fed3d35b

ARM: mx3: dynamically register mxc-mmc devices · 6a697e3d

Uwe Kleine-König authored Nov 12, 2010

Compared to the static devices the dynamic have a DMA resource.
This should be save as it seems unused in the driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

6a697e3d

ARM: mx3: introduce SOC_IMX31 and SOC_IMX35 · a528bc87

Uwe Kleine-König authored Nov 12, 2010

Additionally convert some known to be good usages to the new
names.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

a528bc87

ARM: mx3: use an MX35 constant in imx35 only code · 86f8efda
Uwe Kleine-König authored Nov 12, 2010
```
... instead of MX3x
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
86f8efda
ARM: mx3: move registration of gpios to plat-mxc/gpio.c · d7e0951f
Uwe Kleine-König authored Nov 11, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
d7e0951f

ARM: imx: use SOC_IMX25 instead of ARCH_MX25 for multi-SoC · 972cc482

Uwe Kleine-König authored Nov 11, 2010

Some usages of ARCH_MX25 are assuming that if it is
defined the other SoCs are undefined.  Use SOC_IMX25 for the save
places.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

972cc482

ARM: imx: let the machines select SOC_IMX{21,27} · 36a8cac9

Uwe Kleine-König authored Nov 11, 2010

This prepares multi-SoC kernel support.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

36a8cac9

ARM: imx: let IMX_HAVE_PLATFORM_IMX_FB select HAVE_FB_IMX · fd2fa2e3

Uwe Kleine-König authored Nov 11, 2010

This way FB_IMX can just depend on HAVE_FB_IMX and machines
just need to select IMX_HAVE_PLATFORM_IMX_FB without bothering
about HAVE_FB_IMX.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

fd2fa2e3

ARM: imx: move mx25 support to mach-imx · e48ab1c1
Uwe Kleine-König authored Nov 11, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
e48ab1c1
ARM: mx25: remove now empty devices.h · 2a8bd56a
Uwe Kleine-König authored Nov 11, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
2a8bd56a
ARM: mx25: dynamically allocate mx2-camera devices · bb4c853f
Uwe Kleine-König authored Nov 11, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
bb4c853f
ARM: mx25: dynamically allocate imx2-wdt devices · 00871505
Uwe Kleine-König authored Nov 11, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
00871505

17 Nov, 2010 23 commits

ARM: mx25: dynamically allocatate imx-fb devices · 194ee8e8
Uwe Kleine-König authored Nov 11, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
194ee8e8
ARM: mx25: dynamically allocate imxdi_rtc devices · e7c74b34
Uwe Kleine-König authored Nov 11, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
e7c74b34

ARM: mx25: dynamically allocate imx-keypad devices · ab9cee4b

Uwe Kleine-König authored Nov 11, 2010

The mxc-keypad device seems to be the result of an early and partial
merge of the keypad driver.  It's unused and there is no corresponding
driver available, so just remove it.

Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

ab9cee4b

ARM: mx25: move registration of gpios to plat-mxc/gpio.c · d485c7e7

Uwe Kleine-König authored Nov 11, 2010

To use common macros to define the gpio ports for imx{1,21,25,27} the
existing ones had to made more general and a few more base address defines
were necessary.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

d485c7e7

ARM: mx25: dynamically allocate mxc_pwm devices · 5f3d1092
Uwe Kleine-König authored Nov 10, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
5f3d1092
ARM: mx25: dynamically allocate fsl-usb2-udc devices · 224b8c83
Uwe Kleine-König authored Nov 10, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
224b8c83

ARM: mx25: dynamically allocate mxc-ehci devices · 2c20b9f1

Uwe Kleine-König authored Nov 10, 2010

According to the reference manual of the i.MX25 the host controller uses an
offset of 0x200 not 0x400 as was specified in the resources for mxc_usbh2.

Needs-Testing: yes
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

2c20b9f1

ARM: imx: move registration of gpios to plat-mxc/gpio.c · e9f0bafb

Uwe Kleine-König authored Nov 10, 2010

This finally gets rid of mach-imx/devices.c.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

e9f0bafb

ARM: imx: remove now empty devices.h · 3a6f52a7
Uwe Kleine-König authored Nov 10, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
3a6f52a7
ARM: imx: dynamically allocate imx21-hcd devices · 9f871469
Uwe Kleine-König authored Nov 10, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
9f871469
ARM: imx: dynamically allocate imx-keypad devices · 3f880141
Uwe Kleine-König authored Nov 10, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
3f880141
ARM: imx: dynamically allocate fsl-usb2-udc devices · bd455ed3
Uwe Kleine-König authored Nov 09, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
bd455ed3
ARM: imx: dynamically allocate mxc-ehci devices · 2eb42d5c
Uwe Kleine-König authored Nov 05, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
2eb42d5c

ARM: imx: dynamically register mxc-mmc devices · 9d3d945a

Uwe Kleine-König authored Nov 05, 2010

... plus a trivial simplification of mx21ads_sdhc_init()
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

9d3d945a

ARM: mx3/mach-pcm037_eet: Fix section mismatch for eet_init_devices() · c194daad

Alberto Panizzo authored Nov 01, 2010

This function should be marked as __init because it is used only
in the init phase.

This fix the compiler warning:
 LD      arch/arm/mach-mx3/built-in.o
 WARNING: arch/arm/mach-mx3/built-in.o(.text+0x1328): Section mismatch in reference from the function eet_init_devices() to the (unknown reference) .init.rodata:(unknown)
 The function eet_init_devices() references
 the (unknown reference) __initconst (unknown).
 This is often because eet_init_devices lacks a __initconst
 annotation or the annotation of (unknown) is wrong.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

c194daad

ARM: imx: dynamically allocate mxc_pwm devices · bf182bcc
Uwe Kleine-König authored Nov 05, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
bf182bcc

ARM: mx3: enable SPI_IMX for better compile coverage · c0624657

Uwe Kleine-König authored Nov 05, 2010

SPI_IMX defaults to m for i.MX machines.  So enabling SPI is enough.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

c0624657

ARM: imx: dynamically register imx-fb devices · ad851bff
Uwe Kleine-König authored Nov 04, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
ad851bff

ARM: imx: change the way flexcan devices are registered · fc40d019

Uwe Kleine-König authored Nov 04, 2010

Group soc specific data in a global struct instead of repeating it for each
call to imxXX_add_flexcanX. The structs holding the actual data are placed
in .init.constdata and so don't do much harm. Compared to the previous
approach this reduces code size to call imx_add_flexcan.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

fc40d019

ARM: imx: dynamically allocate imx2-wdt devices · e0a1961d

Uwe Kleine-König authored Nov 04, 2010

Currently there is no platform data used in the driver.  In case this
changes and for consistency NULL is passed unused to the soc specific
functions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

e0a1961d

ARM: imx: dynamically allocate mx2-camera device · b2997cb1
Uwe Kleine-König authored Nov 02, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
b2997cb1
ARM: imx/gpio: remove some useless casts · 3bde75b5
Uwe Kleine-König authored Nov 02, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
3bde75b5
ARM: imx: dynamically allocate mx1-camera device · 9bb39b3f
Uwe Kleine-König authored Nov 02, 2010
```
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
```
9bb39b3f