This patch adds support for a new IIO channel type for pressure measurements.
This can for example be used for barometric pressure sensors.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Some of the newer generation devices from the ADIS16XXX series have more
registers than what can be supported with the current register addressing
scheme. These devices implement register paging to support a larger register
range. Each page is 128 registers large and the currently active page can be
selected via register 0x00 in each page. This patch implements transparent
paging inside the common adis library. The register read/write interface stays
the same and when a register is accessed the library automatically switches to
the correct page if it is not already selected. The page number is encoded in
the upper bits of the register number, e.g. register 0x5 of page 1 is 0x85.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch adds support for the ADIS16133, ADIS16135, ADIS16136 single channel
gyroscopes. The main difference between them is the sensor precision.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Some of the newer generation devices from the ADIS16XXX family have 32bit wide
register which spans two 16bit wide registers. This patch adds support for
reading and writing a 32bit wide register.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Provide a IIO debugfs register access function for the ADIS library. This
function can be used by individual drivers to allow raw register access via
debugfs.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The driver does not expose any custom API to userspace and none of the standard
static code checker tools report any issues, so move it out of staging.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The recent cleanups have decimated the drivers code size by quite a bit. It is
only a few hundred lines in total now. Putting everything into one file also
allows to reduce the code size a bit more by removing a few lines of boilerplate
code. The only functional change made by this patch is that we now always
include buffer support, instead of making it optional. This is more consistent
with what we do for other drivers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The temperature scale and offset depend on the reference voltage, the current
formula used in the driver assumes a 2.5V reference. This patch modifies the
code to report the unprocessed value for the temperature channel "raw" property
and to provide proper "scale" and "offset" properties which depend on the
selected reference voltage.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Rework the regulator handling of the driver to match more closely what we do in
other drivers. Make the regulator non-optional if a external reference is used.
Also dispose the option of specifying the reference voltage via platform data.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

For buffered mode we do not want to perform endianness conversion in the kernel,
but rather offload it to user space, since it is not always required to do a
conversion at all. It also greatly simplifies the kernel code since no
post-processing has to be done and may allow future optimizations like streaming
data directly to a storage device or over the network via DMA.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Now that the adis library no longer depends on the sw_ring buffer implementation
we can move it out of staging.

While we are at it also sort the entries in the iio Kconfig and Makefile to be
in alphabetical order.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Currently the driver reads out all sample registers of the device and throws
away those which it does not need. Furthermore the SPI message is constructed
each time the trigger handler is run, although it will be the same each time.
This patch preallocates and pre-constructs the SPI message in the
"update_scan_mode" callback. Only those register which are actually selected for
sampling are included in the message. The patch also gets rid of the conversion
of the sample data from big endian to the native endianness and instead marks
the channel as big endian in its scan type. This allows to directly push the
SPI transfer buffer to the IIO buffer without the need to post-process it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use the triggered buffer helper functions to setup and tear down the buffer for
the adis library instead of doing this manually. This also means that we switch
away from the deprecated sw_ring buffer and use the kfifo buffer now instead.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use the new adis library for the adis16260 driver. This allows us to completely
scrap the adis16260 buffer and trigger code and about half of the core driver
code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use the new adis library for the adis16240 driver. This allows us to completely
scrap the adis16240 buffer and trigger code and more than half of the core
driver code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use the new adis library for the adis16220 driver. The adis16220 driver is a bit
special and so we can only make use of the generic register access and control
functions for now.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use the new adis library for the adis16209 driver. This allows us to completely
scrap the adis16209 buffer and trigger code and more than half of the core
driver code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use the new adis library for the adis16204 driver. This allows us to completely
scrap the adis16204 buffer and trigger code and more than half of the core
driver code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use the new adis library for the adis16203 driver. This allows us to completely
scrap the adis16203 buffer and trigger code and more than half of the core
driver code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Use the new adis library for the adis16201 driver. This allows us to completely
scrap the adis16201 buffer and trigger code and more than half of the core
driver code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

A lot of the devices from the ADIS family use the same methods for accessing
registers, sampling data and trigger handling. They also have similar register
layout for the control registers.

This patch adds a common library for these devices. The library implements
functions for reading and writing registers as buffer and trigger management. It
also provides a set functions for accessing the control registers and for
running the devices internal self-test. Having this common library code will
allow us to remove a lot of duplicated code.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

We had assigned the return value to 'ret' but ignored it when
return from isl29018_write_raw(), it's better to return 'ret'
instead of 0.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Match the iio_buffer_register stub signature up to the real function and make
the second parameter const. This fixes a the following warnings if
CONFIG_IIO_BUFFER is disabled:

	drivers/staging/iio/accel/adis16201_core.c: In function ‘adis16201_probe’:
	drivers/staging/iio/accel/adis16201_core.c:536: warning: passing argument 2 of ‘iio_buffer_register’ discards qualifiers from pointer target type
	drivers/staging/iio/accel/adis16203_core.c: In function ‘adis16203_probe’:
	drivers/staging/iio/accel/adis16203_core.c:468: warning: passing argument 2 of ‘iio_buffer_register’ discards qualifiers from pointer target type
	drivers/staging/iio/accel/adis16204_core.c: In function ‘adis16204_probe’:
	drivers/staging/iio/accel/adis16204_core.c:527: warning: passing argument 2 of ‘iio_buffer_register’ discards qualifiers from pointer target type
	drivers/staging/iio/accel/adis16209_core.c: In function ‘adis16209_probe’:
	drivers/staging/iio/accel/adis16209_core.c:542: warning: passing argument 2 of ‘iio_buffer_register’ discards qualifiers from pointer target type
	drivers/staging/iio/accel/adis16240_core.c: In function ‘adis16240_probe’:
	drivers/staging/iio/accel/adis16240_core.c:588: warning: passing argument 2 of ‘iio_buffer_register’ discards qualifiers from pointer target type
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Return -ENOMEM instead of 0 if kmemdup fails.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In tsl_2563_write_interrupt_config and tsl2562_remove, interrupts are not
disabled where they should be. This seems to be from a mistake of using |=
instead of &= in 2 lines of code.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The function __iio_add_event_config_attrs is only called once, by the
function iio_device_register_eventset.  If the call fails,
iio_device_register_eventset calls __iio_remove_event_config_attrs.  There
is thus no need for __iio_add_event_config_attrs to also call
__iio_remove_event_config_attrs on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r@
identifier f,free,a;
parameter list[n] ps;
type T;
expression e;
@@

f(ps,T a,...) {
  ... when any
      when != a = e
  if(...) { ... free(a); ... return ...; }
  ... when any
}

@@
identifier r.f,r.free;
expression x,a;
expression list[r.n] xs;
@@

* x = f(xs,a,...);
  if (...) { ... free(a); ... return ...; }
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The function is expected to return the number of bytes consumed and as long as
not all bytes have been consumed the function will be called again. Currently
the function returns 'ret', which will always be 0 in this case, so we end up in
a endless loop since the caller will assume that no bytes have been consumed. So
instead return len as it is supposed to.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

It's non-sense to use tristate for the option, it's bool.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Pull KVM fix from Marcelo Tosatti:
 "A correction for oops on module init with older Intel hosts."

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix invalid secondary exec controls in vmx_cpuid_update()

Merge misc fixes from Andrew Morton.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (12 patches)
  revert "mm: fix-up zone present pages"
  tmpfs: change final i_blocks BUG to WARNING
  tmpfs: fix shmem_getpage_gfp() VM_BUG_ON
  mm: highmem: don't treat PKMAP_ADDR(LAST_PKMAP) as a highmem address
  mm: revert "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures"
  rapidio: fix kernel-doc warnings
  swapfile: fix name leak in swapoff
  memcg: fix hotplugged memory zone oops
  mips, arc: fix build failure
  memcg: oom: fix totalpages calculation for memory.swappiness==0
  mm: fix build warning for uninitialized value
  mm: add anon_vma_lock to validate_mm()

Return -ENOMEM if dmm_txn_init cannot allocate a refill engine.

v2: Fix typing issue seen with newer compilers
Signed-off-by: Andy Gross <andy.gross@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Modify qt_status_change_check() and delete qt_status_change().
Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert commit 7f1290f2 ("mm: fix-up zone present pages")

That patch tried to fix a issue when calculating zone->present_pages,
but it caused a regression on 32bit systems with HIGHMEM.  With that
change, reset_zone_present_pages() resets all zone->present_pages to
zero, and fixup_zone_present_pages() is called to recalculate
zone->present_pages when the boot allocator frees core memory pages into
buddy allocator.  Because highmem pages are not freed by bootmem
allocator, all highmem zones' present_pages becomes zero.

Various options for improving the situation are being discussed but for
now, let's return to the 3.6 code.

Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: Petr Tesarik <ptesarik@suse.cz>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Under a particular load on one machine, I have hit shmem_evict_inode()'s
BUG_ON(inode->i_blocks), enough times to narrow it down to a particular
race between swapout and eviction.

It comes from the "if (freed > 0)" asymmetry in shmem_recalc_inode(),
and the lack of coherent locking between mapping's nrpages and shmem's
swapped count.  There's a window in shmem_writepage(), between lowering
nrpages in shmem_delete_from_page_cache() and then raising swapped
count, when the freed count appears to be +1 when it should be 0, and
then the asymmetry stops it from being corrected with -1 before hitting
the BUG.

One answer is coherent locking: using tree_lock throughout, without
info->lock; reasonable, but the raw_spin_lock in percpu_counter_add() on
used_blocks makes that messier than expected.  Another answer may be a
further effort to eliminate the weird shmem_recalc_inode() altogether,
but previous attempts at that failed.

So far undecided, but for now change the BUG_ON to WARN_ON: in usual
circumstances it remains a useful consistency check.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fuzzing with trinity hit the "impossible" VM_BUG_ON(error) (which Fedora
has converted to WARNING) in shmem_getpage_gfp():

  WARNING: at mm/shmem.c:1151 shmem_getpage_gfp+0xa5c/0xa70()
  Pid: 29795, comm: trinity-child4 Not tainted 3.7.0-rc2+ #49
  Call Trace:
    warn_slowpath_common+0x7f/0xc0
    warn_slowpath_null+0x1a/0x20
    shmem_getpage_gfp+0xa5c/0xa70
    shmem_fault+0x4f/0xa0
    __do_fault+0x71/0x5c0
    handle_pte_fault+0x97/0xae0
    handle_mm_fault+0x289/0x350
    __do_page_fault+0x18e/0x530
    do_page_fault+0x2b/0x50
    page_fault+0x28/0x30
    tracesys+0xe1/0xe6

Thanks to Johannes for pointing to truncation: free_swap_and_cache()
only does a trylock on the page, so the page lock we've held since
before confirming swap is not enough to protect against truncation.

What cleanup is needed in this case? Just delete_from_swap_cache(),
which takes care of the memcg uncharge.
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Dave Jones <davej@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmap_to_page returns the corresponding struct page for a virtual address
of an arbitrary mapping.  This works by checking whether the address
falls in the pkmap region and using the pkmap page tables instead of the
linear mapping if appropriate.

Unfortunately, the bounds checking means that PKMAP_ADDR(LAST_PKMAP) is
incorrectly treated as a highmem address and we can end up walking off
the end of pkmap_page_table and subsequently passing junk to pte_page.

This patch fixes the bound check to stay within the pkmap tables.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Jiri Slaby reported the following:

	(It's an effective revert of "mm: vmscan: scale number of pages
	reclaimed by reclaim/compaction based on failures".) Given kswapd
	had hours of runtime in ps/top output yesterday in the morning
	and after the revert it's now 2 minutes in sum for the last 24h,
	I would say, it's gone.

The intention of the patch in question was to compensate for the loss of
lumpy reclaim.  Part of the reason lumpy reclaim worked is because it
aggressively reclaimed pages and this patch was meant to be a sane
compromise.

When compaction fails, it gets deferred and both compaction and
reclaim/compaction is deferred avoid excessive reclaim.  However, since
commit c6543459 ("mm: remove __GFP_NO_KSWAPD"), kswapd is woken up
each time and continues reclaiming which was not taken into account when
the patch was developed.

Attempts to address the problem ended up just changing the shape of the
problem instead of fixing it.  The release window gets closer and while
a THP allocation failing is not a major problem, kswapd chewing up a lot
of CPU is.

This patch reverts commit 83fde0f2 ("mm: vmscan: scale number of
pages reclaimed by reclaim/compaction based on failures") and will be
revisited in the future.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Zdenek Kabelac <zkabelac@redhat.com>
Tested-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Johannes Hirte <johannes.hirte@fem.tu-ilmenau.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix rapidio kernel-doc warnings:

  Warning(drivers/rapidio/rio.c:415): No description found for parameter 'local'
  Warning(drivers/rapidio/rio.c:415): Excess function parameter 'lstart' description in 'rio_map_inb_region'
  Warning(include/linux/rio.h:290): No description found for parameter 'switches'
  Warning(include/linux/rio.h:290): No description found for parameter 'destid_table'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Acked-by: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>