- 16 Nov, 2016 40 commits
-
-
Marek Szyprowski authored
Newer MFC hardware have internal clock gating feature, so additional software-triggered clock gating sometimes causes misbehavior of the MFC firmware and results in freeze or crash. This patch changes the driver to use software-triggered clock gating only when working with v5 MFC hardware, where it has been proven to work properly. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Donghwa Lee authored
Currently, when incomplete frame is received in the middle of decoding, driver treats it as an error, so src/dst queue and clock are cleaned. Although it is obviously error case, it is needed to maintain video decoding in case of necessity. This patch supports skip incomplete frame to next. Signed-off-by:
Donghwa Lee <dh09.lee@samsung.com> Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by:
-
Ingi Kim authored
When video file was decoded by H/W MFCv8. It occurred IOMMU page fault because of accessing abnormal memory of mfc ctx buf. So this patch supports buffer size of mfc context more. Relevant page fault error is below. [ 3524.617147] PAGE FAULT occurred at 0x10108000 by 11200000.sysmmu(Page table base: 0x6d86c000) [ 3524.624192] Lv1 entry: 0x6c27d001 [ 3524.627567] Lv2 entry: 0x0 [ 3524.630482] ------------[ cut here ]------------ [ 3524.635020] kernel BUG at drivers/iommu/exynos-iommu.c:358! [ 3524.640567] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM [ 3524.646373] Modules linked in: [ 3524.649410] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.0.0-00001-g0ff9b87-dirty #18 [ 3524.657117] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3524.663184] task: c0e4aff0 ti: c0e3c000 task.ti: c0e3c000 [ 3524.668566] PC is at exynos_sysmmu_irq+0x1b8/0x2c4 [ 3524.673330] LR is at vprintk_emit+0x2b8/0x58c [ 3524.677657] pc : [<c037cc78>] lr : [<c00704a4>] psr: 600d0193 [ 3524.677657] sp : c0e3dd90 ip : 00000000 fp : c0e3ddcc [ 3524.689092] r10: ee29a110 r9 : 00000000 r8 : ee29a128 [ 3524.694292] r7 : ed812810 r6 : 10108000 r5 : ed86c000 r4 : 00000000 [ 3524.700791] r3 : c0ec9bd8 r2 : 00000000 r1 : 00000000 r0 : ed82ff00 [ 3524.707292] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel [ 3524.714656] Control: 10c5387d Table: 6b08c06a DAC: 00000015 [ 3524.720375] Process swapper/0 (pid: 0, stack limit = 0xc0e3c210) [ 3524.726354] Stack: (0xc0e3dd90 to 0xc0e3e000) [ 3524.730689] dd80: c0e3dd9c c0069d68 ee58c338 6d86c000 [ 3524.738836] dda0: ee58c338 ee298c40 ee2915a0 0000003b c0e64ef4 c0e3c000 00000000 00000000 [ 3524.746981] ddc0: c0e3de14 c0e3ddd0 c0071ef4 c037cacc ffffffff a00d0193 c0e3ddf4 ee291540 [ 3524.755126] dde0: c0ec793c c0ec7928 7fffffff ee291540 ee2915a0 ee298c40 c0e64ef4 ee004660 [ 3524.763272] de00: ee010800 c0e3df00 c0e3de34 c0e3de18 c0072138 c0071e9c 00020000 ee291540 [ 3524.771418] de20: ee2915a0 00000016 c0e3de4c c0e3de38 c0075130 c00720f8 0000003b ee028300 [ 3524.779563] de40: c0e3de64 c0e3de50 c0071450 c0075068 00000100 00000012 c0e3de8c c0e3de68 [ 3524.787708] de60: c030d240 c0071420 c030d19c 00000016 00000000 00000016 00000000 00000001 [ 3524.795854] de80: c0e3dea4 c0e3de90 c0071450 c030d1a8 00000092 c0e37a1c c0e3ded4 c0e3dea8 [ 3524.804000] dea0: c0071790 c0071420 c0e3df00 f000200c 00000016 c0e440a8 c0e3df00 f0002000 [ 3524.812145] dec0: c095bc8c 00000001 c0e3defc c0e3ded8 c0008730 c0071710 c0010d88 c0010d8c [ 3524.820290] dee0: 600d0013 ffffffff c0e3df34 c0ec7eb4 c0e3df54 c0e3df00 c0014780 c00086fc [ 3524.828436] df00: 00000001 00000000 00000000 c0020780 c0e3c000 c0e43530 00000000 00000000 [ 3524.836581] df20: c0ec7eb4 c095bc8c 00000001 c0e3df54 c0e3df58 c0e3df48 c0010d88 c0010d8c [ 3524.844727] df40: 600d0013 ffffffff c0e3df94 c0e3df58 c0062690 c0010d50 c0ec75f0 00000001 [ 3524.852872] df60: c0e3df84 c0e4353c c0e39580 c0e43e84 c0e3c000 00000002 c0e3df58 c0e38b88 [ 3524.861018] df80: c0952b9c ffffffff c0e3dfac c0e3df98 c094d1b8 c00622d4 c0e3c000 c0e43e10 [ 3524.869163] dfa0: c0e3dff4 c0e3dfb0 c0d86d30 c094d130 ffffffff ffffffff c0d866f0 00000000 [ 3524.877309] dfc0: 00000000 c0df06d8 00000000 c0ee3f14 c0e434c0 c0df06d4 c0e4c20c 4000406a [ 3524.885454] dfe0: 410fc073 00000000 00000000 c0e3dff8 40008074 c0d86970 00000000 00000000 [ 3524.893610] [<c037cc78>] (exynos_sysmmu_irq) from [<c0071ef4>] (handle_irq_event_percpu+0x64/0x25c) [ 3524.902615] [<c0071ef4>] (handle_irq_event_percpu) from [<c0072138>] (handle_irq_event+0x4c/0x6c) [ 3524.911454] [<c0072138>] (handle_irq_event) from [<c0075130>] (handle_level_irq+0xd4/0x14c) [ 3524.919773] [<c0075130>] (handle_level_irq) from [<c0071450>] (generic_handle_irq+0x3c/0x4c) [ 3524.928180] [<c0071450>] (generic_handle_irq) from [<c030d240>] (combiner_handle_cascade_irq+0xa4/0x110) [ 3524.937624] [<c030d240>] (combiner_handle_cascade_irq) from [<c0071450>] (generic_handle_irq+0x3c/0x4c) [ 3524.946981] [<c0071450>] (generic_handle_irq) from [<c0071790>] (__handle_domain_irq+0x8c/0xfc) [ 3524.955646] [<c0071790>] (__handle_domain_irq) from [<c0008730>] (gic_handle_irq+0x40/0x78) [ 3524.963966] [<c0008730>] (gic_handle_irq) from [<c0014780>] (__irq_svc+0x40/0x74) [ 3524.971412] Exception stack(0xc0e3df00 to 0xc0e3df48) [ 3524.976441] df00: 00000001 00000000 00000000 c0020780 c0e3c000 c0e43530 00000000 00000000 [ 3524.984586] df20: c0ec7eb4 c095bc8c 00000001 c0e3df54 c0e3df58 c0e3df48 c0010d88 c0010d8c [ 3524.992729] df40: 600d0013 ffffffff [ 3524.996205] [<c0014780>] (__irq_svc) from [<c0010d8c>] (arch_cpu_idle+0x48/0x4c) [ 3525.003567] [<c0010d8c>] (arch_cpu_idle) from [<c0062690>] (cpu_startup_entry+0x3c8/0x4a4) [ 3525.011805] [<c0062690>] (cpu_startup_entry) from [<c094d1b8>] (rest_init+0x94/0x98) [ 3525.019516] [<c094d1b8>] (rest_init) from [<c0d86d30>] (start_kernel+0x3cc/0x3d8) [ 3525.026963] Code: e34c30ec e5932004 e3520000 ca000018 (e7f001f2) [ 3525.033028] ---[ end trace 71ed544f653b4d46 ]--- Signed-off-by:
Ingi Kim <ingi2.kim@samsung.com> Signed-off-by:
-
Andrzej Hajda authored
Driver complains about too small scratch buffer size. After adjusting it according to vendor code, decoding works. [mszyprow: moved the change to the header file] Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
This patch adds support for Exynos5433 specific version of the GScaler module. The main difference between Exynos 5433 and earlier is addition of new clocks that have to be controlled. Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Tested-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Marek Szyprowski authored
This driver can be also used on Exynos5433, which is ARM64-based platform, which selects only ARCH_EXYNOS symbol. Signed-off-by:
-
Marek Szyprowski authored
Replace open-coded driver data extraction code with generic helper. Signed-off-by:
-
Marek Szyprowski authored
Fix missing newline char in debug messages. Signed-off-by:
-
Marek Szyprowski authored
Remove dead, unused code. Signed-off-by:
-
Marek Szyprowski authored
System PM callbacks only ensure that device is runtime suspended/resumed, so remove them and use generic pm_runtime_force_suspend/resume helper. Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
-
Ulf Hansson authored
It's not needed to keep a local flag about the current system PM state. Let's just remove that code and the corresponding debug print. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
-
Ulf Hansson authored
To potentially save more power in runtime PM suspend state, let's also prepare/unprepare the clock from the runtime PM callbacks. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
-
Ulf Hansson authored
To make sure the clock is fully gated in ->remove(), we first need to to bring the device into full power by invoking pm_runtime_get_sync(). Then, let's both unprepare and disable the clock. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
-
Ulf Hansson authored
There are no need to set up the PM callbacks (runtime and system) unless they are being used. It also causes compiler warnings about unused functions. Silence the warnings by making them available for CONFIG_PM (runtime callbacks) and CONFIG_PM_SLEEP (system sleep callbacks). [mszyprow: squashed two patches into one to avoid potential build break, changed patch subject and updated commit message] Signed-off-by:
-
Ulf Hansson authored
The driver depended on CONFIG_PM to be functional. Let's remove that dependency, by enable the runtime PM resourses during ->probe() and update the device's runtime PM status to reflect this. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
-
Ulf Hansson authored
Since gsc_m2m_resume() always returns 0, convert it to a void instead. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
-
Ulf Hansson authored
Instead of having separate functions that fetches, prepares and unprepares the clock, let's encapsulate this code into ->probe(). This makes error handling easier and decreases the lines of code. [mszyprow: rebased onto v4.9-rc4] Signed-off-by:
-
Shuah Khan authored
Include buffer size in s5p_mfc_alloc_priv_buf() the error message when it fails to allocate the buffer. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
Media drivers that use the videobuf2 framework have to give back to vb2 all the buffers that received from vb2 using its .buf_queue callback. But the exynos-gsc driver isn't doing a proper cleanup so vb2 complains that the number of buffers enqueued and received are not balanced: WARNING: CPU: 2 PID: 660 at drivers/media/v4l2-core/videobuf2-core.c:1654 __vb2_queue_cancel+0xec/0x150 [videobuf2_core] Modules linked in: mwifiex_sdio mwifiex uvcvideo exynos_gsc videobuf2_vmalloc s5p_mfc s5p_jpeg CPU: 2 PID: 660 Comm: lt-gst-validate Not tainted 4.8.0 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c010e24c>] (unwind_backtrace) from [<c010af30>] (show_stack+0x10/0x14) [<c010af30>] (show_stack) from [<c03291a4>] (dump_stack+0x88/0x9c) [<c03291a4>] (dump_stack) from [<c011a858>] (__warn+0xe8/0x100) [<c011a858>] (__warn) from [<c011a920>] (warn_slowpath_null+0x20/0x28) [<c011a920>] (warn_slowpath_null) from [<bf0b6ed0>] (__vb2_queue_cancel+0xec/0x150 [videobuf2_core]) [<bf0b6ed0>] (__vb2_queue_cancel [videobuf2_core]) from [<bf0b7464>] (vb2_core_streamoff+0x34/0x9c [videobuf2_core]) [<bf0b7464>] (vb2_core_streamoff [videobuf2_core]) from [<bf11b9e8>] (v4l2_m2m_streamoff+0x2c/0xe4 [v4l2_mem2mem]) [<bf11b9e8>] (v4l2_m2m_streamoff [v4l2_mem2mem]) from [<bf01b84c>] (__video_do_ioctl+0x298/0x30c [videodev]) [<bf01b84c>] (__video_do_ioctl [videodev]) from [<bf01b234>] (video_usercopy+0x174/0x4e8 [videodev]) [<bf01b234>] (video_usercopy [videodev]) from [<bf0165c8>] (v4l2_ioctl+0xc4/0xd8 [videodev]) [<bf0165c8>] (v4l2_ioctl [videodev]) from [<c01f291c>] (do_vfs_ioctl+0x9c/0x8f4) [<c01f291c>] (do_vfs_ioctl) from [<c01f31a8>] (SyS_ioctl+0x34/0x5c) [<c01f31a8>] (SyS_ioctl) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c) Fix this by passing back to vb2 all the received buffers that were not processed. Signed-off-by:
-
Javier Martinez Canillas authored
The driver doesn't unregister the video device node when the driver is removed, this keeps video device nodes that makes the machine to crash with a NULL pointer dereference when nodes are attempted to be opened: [ 36.530006] Unable to handle kernel paging request at virtual address bf1f8200 [ 36.535985] pgd = edbbc000 [ 36.538486] [bf1f8200] *pgd=6d99a811, *pte=00000000, *ppte=00000000 [ 36.544727] Internal error: Oops: 7 [#1] PREEMPT SMP ARM [ 36.550016] Modules linked in: s5p_jpeg s5p_mfc v4l2_mem2mem videobuf2_dma_contig [ 36.566303] CPU: 6 PID: 533 Comm: v4l2-ctl Not tainted 4.8.0 [ 36.574466] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 36.580526] task: ee3cc600 task.stack: ed626000 [ 36.585046] PC is at try_module_get+0x1c/0xac [ 36.589364] LR is at try_module_get+0x1c/0xac [ 36.593698] pc : [<c0187a60>] lr : [<c0187a60>] psr: 80070013 [ 36.593698] sp : ed627de0 ip : a0070013 fp : 00000000 [ 36.605156] r10: 00000002 r9 : ed627ed0 r8 : 00000000 [ 36.610331] r7 : c01e5f14 r6 : ed57be00 r5 : bf1f8200 r4 : bf1f8200 [ 36.616834] r3 : 00000002 r2 : 00000002 r1 : 01930192 r0 : 00000001 .. [ 36.785004] [<c0187a60>] (try_module_get) from [<c01e5c10>] (cdev_get+0x1c/0x4c) [ 36.792362] [<c01e5c10>] (cdev_get) from [<c01e5f40>] (chrdev_open+0x2c/0x178) [ 36.799555] [<c01e5f40>] (chrdev_open) from [<c01df5d4>] (do_dentry_open+0x1e0/0x300) [ 36.807360] [<c01df5d4>] (do_dentry_open) from [<c01eecdc>] (path_openat+0x35c/0xf58) [ 36.815154] [<c01eecdc>] (path_openat) from [<c01f0668>] (do_filp_open+0x5c/0xc0) [ 36.822606] [<c01f0668>] (do_filp_open) from [<c01e09ac>] (do_sys_open+0x10c/0x1bc) [ 36.830235] [<c01e09ac>] (do_sys_open) from [<c01078c0>] (ret_fast_syscall+0x0/0x3c) [ 36.837942] Code: 0a00001c e1a04000 e3a00001 ebfec92d (e5943000) Signed-off-by:
-
Javier Martinez Canillas authored
The struct v4l2_device instance for the G-Scaler is not dyanmically allocated but a member of the struct gsc_dev. In fact, the assigned .release callback is video_device_release_empty(). But gsc_register_m2m_device() attempts to release the v4l2_device by calling video_device_release() in its error path. This is wrong since the v4l2_device wasn't allocated directly and will be freed once its parent struct gsc_dev is freed. While being there, rename the remaining goto label in the error path to something that better explains the error path cleanup. Signed-off-by:
-
Javier Martinez Canillas authored
The driver don't take into account the differences between packed, semi planar and multi planar formats when calculating the pixel format bytes per lines and image size values. This makes GStreamer to fail when the following formats are used NV12, NV21, NV16, NV61, YV12, I420 and Y42B: "gst_video_frame_map_id: failed to map video frame plane 1" Nicolas suggested to use the logic found in the Exynos FIMC v4l2 driver since does this correctly. So this patch changes the bytes per line and image size calculation according to what's done in this media driver. After this patch most supported formats work correctly. There are still issues with the NV21 and NV61 formats, but that seems to be a separate problem since NV12 and NV16 work and these formats use the same values. So this can be fixed as a follow-up and shouldn't be a blocker for this change that improves the driver's support. Suggested-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Javier Martinez Canillas authored
The driver exposes 32-bit A/XRGB 8-8-8-8 as supported format but testing shows that using this format produces frames with wrong colors. The test was done with the following GStreamer pipeline: $ gst-launch-1.0 videotestsrc num-buffers=20 ! video/x-raw,format=UYVY \ ! v4l2video3convert ! video/x-raw,format=xRGB ! videoconvert ! kmssink The manual seems to state that the Pixel Format are in Little Endianness so instead use the 32-bit BGRA/X 8-8-8-8 pixel format. This format works correctly when using the following pipeline: $ gst-launch-1.0 videotestsrc num-buffers=20 ! video/x-raw,format=UYVY \ ! v4l2video3convert ! video/x-raw,format=BGRx ! kmssink This change is similar to commit 7f2816e5 ("[media] s5p-fimc: Changed RGB32 to BGR32") that fixed the same issue on a different Samsung driver. Suggested-by:
-
Javier Martinez Canillas authored
User-space applications can use the VIDIOC_REQBUFS ioctl to determine if a memory mapped, user pointer or DMABUF based I/O is supported by a driver. For example, GStreamer attempts to determine the I/O methods supported by the driver by doing many VIDIOC_REQBUFS ioctl calls with different memory types and count 0. And then the real VIDIOC_REQBUFS call with count == n is be made to allocate the buffers. But for count 0, the driver not only frees the buffers but also clears the format set before with VIDIOC_S_FMT. This is a problem since STREAMON fails if a format isn't set but GStreamer first sets a format and then tries to determine the supported I/O methods, so the format will be cleared on REQBUFS(0), before the call to STREAMON. To avoid this issue, only free the buffers on VIDIOC_REQBUFS(0) but don't clear the format. Since is completely valid to set the format and then do different calls to REQBUFS before a call to STREAMON. Signed-off-by:
-
Javier Martinez Canillas authored
The driver try_fmt handler prints a message each time that the image size has been changed due the maximum and minimum width and height. Since user-space can try different format and sizes, this logs a lot of unnecessary messages. Change the message log level to debug and while being there, also add a new line to the message. Signed-off-by:
-
Shuah Khan authored
s5p_mfc_alloc_priv_buf() prints two message to report invalid memory configuration error. Collapse them into a single message. Signed-off-by:
-
Nicolas Dufresne authored
For tiled format, we need to allocated a multiple of the row size. A good example is for 1280x720, wich get adjusted to 1280x736. In tiles, this mean Y plane is 20x23 and UV plane 20x12. Because of the rounding, the previous code would only have enough space to fit half of the last row. [mchehab@s-opensource.com: fix coding style] Signed-off-by:
-
Kieran Bingham authored
The FDP1 driver performs advanced de-interlacing on a memory 2 memory based video stream, and supports conversion from YCbCr/YUV to RGB pixel formats Signed-off-by:
Kieran Bingham <kieran+renesas@bingham.xyz> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Kieran Bingham authored
The FDP1 is a de-interlacing module which converts interlaced video to progressive video. It is also capable of performing pixel format conversion between YCbCr/YUV formats and RGB formats. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
The menu control selects the operation mode of a video deinterlacer. The menu entries are driver specific. Signed-off-by:
Kieran Bingham <kieran@bingham.xyz> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Peter Ujfalusi authored
When requesting the DMA channel it was mandatory that we do not have DMA resource nor valid DMA channel via DT. In this case the dma_request_slave_channel_compat() would fall back and request any channel with SW trigger. The same can be achieved with the dma_request_chan_by_mask() without the misleading use of the DMAengine API - implying that the omap3isp does need to have DMA resource or valid dma binding in DT. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Laurent Pinchart authored
When parsing the graph the driver loops over all endpoints using of_graph_get_next_endpoint(). The function handles reference counting of the passed and returned nodes, so the returned node's reference count must not be decreased manually in the normal path. Move the offending of_node_put() call to the error path that requires manual reference count handling. Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
-
Philipp Zabel authored
The Rift CV1 Sensor has bInterfaceClass set to vendor specific, so we need an entry in uvc_ids to probe it. Just as the Rift DK2 IR tracker, it misreports the pixel format as YUYV instead of Y8. The sensor is configured with a low exposure time and high black level by default, so that only bright IR sources can be seen. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The CEC_LOG_ADDRS_FL_CDC_ONLY flag is missing at the documentation, causing this warning: Documentation/output/cec.h.rst:6: WARNING: undefined label: cec-log-addrs-fl-cdc-only (if the link has no caption the label must precede a section header) Add a documentation for it, based on the commit that introduced the flag. Fixes: a69a168a ("[media] cec: add proper support for CDC-Only CEC devices") Signed-off-by:
-
Hans Verkuil authored
Make sure the TX counters are zeroed in the cec_msg struct. Non-zero TX counters make no sense when a message is received, and applications should not see non-zero values here. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Hans Verkuil authored
The cec framework and the pulse8-cec driver have been moved out of staging, so update the MAINTAINERS paths. Signed-off-by:
-
Hans Verkuil authored
Update the TODOs explaining why these two drivers remain in staging. The reason is that these drivers rely on userspace to set the physical address, but that should come from the HDMI output driver. This in turn needs the upcoming HDMI notifier framework. Signed-off-by:
-
Hans Verkuil authored
Now that the CEC framework has been moved out of staging and into the mainline kernel we can do the same for the pulse8-cec driver. Signed-off-by:
-
Hans Verkuil authored
An inner for-loop reused the outer loop variable. This was only noticeable with CEC adapters supporting more than one logical address. Signed-off-by:
-
Hans Verkuil authored
Replace bool by int or __u8 (when used in a struct). Signed-off-by:
-
