- 18 Nov, 2019 5 commits
-
-
José Roberto de Souza authored
When the connector has VCPI allocated and is being moved to another pipe it causes drm_dp_atomic_release_vcpi_slots() and drm_dp_atomic_find_vcpi_slots() to be called in the same atomic check causing the error bellow. This happens because at this point Intel's hw.enable(and all other flags in the same struct) is not set but checking to on the uapi one it have the expected value. [ 580.804430] ------------[ cut here ]------------ [ 580.804436] WARNING: CPU: 0 PID: 1221 at drivers/gpu/drm/drm_dp_mst_topology.c:4094 drm_dp_atomic_find_vcpi_slots+0x157/0x180 [ 580.804439] Modules linked in: cdc_ether r8152 i915 prime_numbers snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep asix snd_hda_core x86_pkg_temp_thermal usbnet mei_hdcp coretemp mii mei_me crct10dif_pclmul snd_pcm crc32_pclmul mei ghash_clmulni_intel i2c_i801 [last unloaded: prime_numbers] [ 580.804462] CPU: 0 PID: 1221 Comm: kworker/0:0 Tainted: G W 5.4.0-rc7-zeh+ #1226 [ 580.804465] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.D00.2321.A09.1909250226 09/25/2019 [ 580.804470] Workqueue: events output_poll_execute [ 580.804476] RIP: 0010:drm_dp_atomic_find_vcpi_slots+0x157/0x180 [ 580.804481] Code: 6a ff ff ff 49 89 6d 08 4c 89 6b 10 4c 89 63 18 49 89 6e 08 e9 55 ff ff ff 41 89 c7 5b 5d 44 89 f8 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 08 73 11 82 48 89 ee 41 bf ea ff ff ff e8 b2 e3 02 [ 580.804484] RSP: 0018:ffffc900009b7ab8 EFLAGS: 00010246 [ 580.804488] RAX: ffff88848c04ef50 RBX: ffff88848c04ef40 RCX: 0000000000000214 [ 580.804492] RDX: ffff88848c04f5e0 RSI: ffff888486eb2c68 RDI: ffff88848e518800 [ 580.804495] RBP: ffff88849d339000 R08: 00000000bc4e1092 R09: 0000000000000000 [ 580.804498] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848c04e728 [ 580.804501] R13: 0000000000000214 R14: ffff88848c04e720 R15: ffff888486eb2c68 [ 580.804504] FS: 0000000000000000(0000) GS:ffff8884a0000000(0000) knlGS:0000000000000000 [ 580.804507] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 580.804510] CR2: 00007ff6bf1ba680 CR3: 0000000005210003 CR4: 0000000000760ef0 [ 580.804512] PKRU: 55555554 [ 580.804515] Call Trace: [ 580.804574] intel_dp_mst_compute_config+0x193/0x2b0 [i915] [ 580.804636] intel_atomic_check+0x10cc/0x20b0 [i915] [ 580.804644] ? drm_atomic_print_old_state+0xf1/0x130 [ 580.804655] drm_atomic_check_only+0x56a/0x810 [ 580.804663] drm_atomic_commit+0xe/0x50 [ 580.804668] drm_client_modeset_commit_atomic+0x18b/0x220 [ 580.804680] drm_client_modeset_commit_force+0x4d/0x180 [ 580.804685] drm_fb_helper_restore_fbdev_mode_unlocked+0x46/0xa0 [ 580.804689] drm_fb_helper_set_par+0x27/0x50 [ 580.804692] drm_fb_helper_hotplug_event.part.0+0xa7/0xc0 [ 580.804696] drm_kms_helper_hotplug_event+0x21/0x30 [ 580.804699] output_poll_execute+0x1a4/0x1c0 [ 580.804706] process_one_work+0x25b/0x5b0 [ 580.804713] worker_thread+0x4b/0x3b0 [ 580.804720] kthread+0x100/0x140 [ 580.804723] ? process_one_work+0x5b0/0x5b0 [ 580.804725] ? kthread_park+0x80/0x80 [ 580.804730] ret_from_fork+0x24/0x50 [ 580.804740] irq event stamp: 40988 [ 580.804743] hardirqs last enabled at (40987): [<ffffffff81128567>] console_unlock+0x437/0x590 [ 580.804746] hardirqs last disabled at (40988): [<ffffffff81001cfa>] trace_hardirqs_off_thunk+0x1a/0x20 [ 580.804749] softirqs last enabled at (40972): [<ffffffff81c00389>] __do_softirq+0x389/0x47f [ 580.804752] softirqs last disabled at (40959): [<ffffffff810b6f19>] irq_exit+0xa9/0xc0 [ 580.804754] ---[ end trace 80052e0c60463c67 ]--- [ 580.804758] [drm:drm_dp_atomic_find_vcpi_slots] *ERROR* cannot allocate and release VCPI on [MST PORT:000000007880692e] in the same state [ 580.811370] [drm:intel_dp_hpd_pulse [i915]] got esi2 02 00 00 [ 580.817239] [drm:intel_dp_hpd_pulse [i915]] got esi 02 00 00 [ 580.817313] ------------[ cut here ]------------ [ 580.817318] WARNING: CPU: 0 PID: 1221 at drivers/gpu/drm/drm_dp_mst_topology.c:4094 drm_dp_atomic_find_vcpi_slots+0x157/0x180 [ 580.817321] Modules linked in: cdc_ether r8152 i915 prime_numbers snd_hda_codec_hdmi snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hwdep asix snd_hda_core x86_pkg_temp_thermal [ 580.817412] [drm:intel_dp_hpd_pulse [i915]] got hpd irq on [ENCODER:306:DDI E] - short [ 580.817413] usbnet mei_hdcp coretemp mii mei_me crct10dif_pclmul snd_pcm crc32_pclmul [ 580.817490] [drm:intel_dp_hpd_pulse [i915]] is_mst [ 580.817491] mei ghash_clmulni_intel i2c_i801 [last unloaded: prime_numbers] [ 580.817498] CPU: 0 PID: 1221 Comm: kworker/0:0 Tainted: G W 5.4.0-rc7-zeh+ #1226 [ 580.817503] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLSFWI1.D00.2321.A09.1909250226 09/25/2019 [ 580.817506] Workqueue: events output_poll_execute [ 580.817511] RIP: 0010:drm_dp_atomic_find_vcpi_slots+0x157/0x180 [ 580.817514] Code: 6a ff ff ff 49 89 6d 08 4c 89 6b 10 4c 89 63 18 49 89 6e 08 e9 55 ff ff ff 41 89 c7 5b 5d 44 89 f8 41 5c 41 5d 41 5e 41 5f c3 <0f> 0b 48 c7 c7 08 73 11 82 48 89 ee 41 bf ea ff ff ff e8 b2 e3 02 [ 580.817516] RSP: 0018:ffffc900009b7ab8 EFLAGS: 00010246 [ 580.817519] RAX: ffff88848c04ef50 RBX: ffff88848c04ef40 RCX: 000000000000018f [ 580.817521] RDX: ffff88848c04f5e0 RSI: ffff888486eb2c68 RDI: ffff88848e518800 [ 580.817523] RBP: ffff88849d339000 R08: 00000000bc4e1092 R09: 0000000000000000 [ 580.817525] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88848c04e728 [ 580.817528] R13: 000000000000018f R14: ffff88848c04e720 R15: ffff888486eb2c68 [ 580.817532] FS: 0000000000000000(0000) GS:ffff8884a0000000(0000) knlGS:0000000000000000 [ 580.817534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 580.817535] CR2: 00007ff6bf1ba680 CR3: 0000000005210003 CR4: 0000000000760ef0 [ 580.817537] PKRU: 55555554 [ 580.817538] Call Trace: [ 580.817620] intel_dp_mst_compute_config+0x193/0x2b0 [i915] [ 580.817690] intel_atomic_check+0x10cc/0x20b0 [i915] [ 580.817697] ? drm_atomic_print_old_state+0xf1/0x130 [ 580.817711] drm_atomic_check_only+0x56a/0x810 [ 580.817721] drm_atomic_commit+0xe/0x50 [ 580.817726] drm_client_modeset_commit_atomic+0x18b/0x220 [ 580.817744] drm_client_modeset_commit_force+0x4d/0x180 [ 580.817751] drm_fb_helper_restore_fbdev_mode_unlocked+0x46/0xa0 [ 580.817756] drm_fb_helper_set_par+0x27/0x50 [ 580.817762] drm_fb_helper_hotplug_event.part.0+0xa7/0xc0 [ 580.817767] drm_kms_helper_hotplug_event+0x21/0x30 [ 580.817771] output_poll_execute+0x1a4/0x1c0 [ 580.817780] process_one_work+0x25b/0x5b0 [ 580.817791] worker_thread+0x4b/0x3b0 [ 580.817800] kthread+0x100/0x140 [ 580.817804] ? process_one_work+0x5b0/0x5b0 [ 580.817807] ? kthread_park+0x80/0x80 [ 580.817813] ret_from_fork+0x24/0x50 [ 580.817832] irq event stamp: 41028 [ 580.817838] hardirqs last enabled at (41027): [<ffffffff81128567>] console_unlock+0x437/0x590 [ 580.817841] hardirqs last disabled at (41028): [<ffffffff81001cfa>] trace_hardirqs_off_thunk+0x1a/0x20 [ 580.817846] softirqs last enabled at (41022): [<ffffffff81c00389>] __do_softirq+0x389/0x47f [ 580.817851] softirqs last disabled at (41013): [<ffffffff810b6f19>] irq_exit+0xa9/0xc0 [ 580.817854] ---[ end trace 80052e0c60463c68 ]--- [ 580.817858] [drm:drm_dp_atomic_find_vcpi_slots] *ERROR* cannot allocate and release VCPI on [MST PORT:000000007880692e] in the same state [ 580.830767] [drm:intel_dp_mst_compute_config [i915]] failed finding vcpi slots:-22 [ 580.830821] [drm:intel_atomic_check [i915]] Encoder config failure: -22 Cc: Lyude Paul <lyude@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191115200430.53146-1-jose.souza@intel.com
-
Matt Roper authored
VBT revision 229 adds a new "Generic DTD" block 58 and deprecates the old LFP panel mode data in block 42. Let's start parsing this block to fill in the panel fixed mode on devices with a >=229 VBT. v2: * Update according to the recent updates: - DTD size is now 16 bits instead of 24 - polarity is now just a single bit for hsync and vsync and is properly documented * Minor checkpatch fix v3: * Now that panel options are parsed separately from the previous patch, move generic DTD parsing into a function parallel to parse_lfp_panel_dtd. We'll still fall back to looking at the legacy LVDS timing block if the generic DTD fails. (Jani) * Don't forget to actually set lfp_lvds_vbt_mode! (Jani) * Drop "bdb_" prefix from dtd entry structure. (Jani) * Follow C99 standard for structure's flexible array member. (Jani) v4: * Add "positive" to polarity field names for clarity. (Jani) * Move VBT version check and fallback to legacy DTD parsing logic to a helper to keep top-level VBT parsing uncluttered. (Jani) * Restructure reserved bit packing at end of generic_dtd_entry from "u32 rsvd:24" to "u8 rsvd[3]" to prevent copy/paste mistakes in the future. (Jani) Bspec: 54751 Bspec: 20148 Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191115165132.9472-3-matthew.d.roper@intel.com
-
Matt Roper authored
Newer VBT versions will add an alternate way to read panel DTD information, so let's split parsing of the general panel information from the timing data in preparation. Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Jesse Barnes <jsbarnes@google.com> Reviewed-by:
-
Chris Wilson authored
Having called intel_gt_init_early() to setup the mock intel_gt, we need to call the corresponding intel_gt_driver_late_release() to clean up. References: dea397e8 ("drm/i915/gt: Flush retire.work timer object on unload") References: 24635c51 ("drm/i915: Move intel_gt initialization to a separate file") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191118094342.2193485-1-chris@chris-wilson.co.uk
-
Jani Nikula authored
It's supposed to be just a const pointer. Fixes: 074c77e3 ("drm/i915/tgl: Gen-12 display loses Yf tiling and legacy CCS support") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
- 16 Nov, 2019 1 commit
-
-
Don Hiatt authored
On some platforms (e.g. KBL) that do not support GuC submission, but the user enabled the GuC communication (e.g for HuC authentication) calling the GuC EXIT_S_STATE action results in lose of ability to enter RC6. We can remove the GuC suspend/resume entirely as we do not need to save the GuC submission status. Add intel_guc_submission_is_enabled() function to determine if GuC submission is active. v2: Do not suspend/resume the GuC on platforms that do not support Guc Submission. v3: Fix typo, move suspend logic to remove goto. v4: Use intel_guc_submission_is_enabled() to check GuC submission status. v5: No need to look at engine to determine if submission is enabled. Squash fix + intel_guc_submission_is_enabled() patch into one. v6: Move resume check into intel_guc_resume() for symmetry. Fix commit Fixes tag. Reported-by:KiteStramuort <kitestramuort@autistici.org> Reported-by:
S. Zharkoff <s.zharkoff@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111594 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111623 Fixes: ffd5ce22 ("drm/i915/guc: Updates for GuC 32.0.3 firmware") Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceralo Spurio <daniele.ceraolospurio@intel.com> Cc: Stuart Summers <stuart.summers@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Tomas Janousek <tomi@nomi.cz> Signed-off-by:
Don Hiatt <don.hiatt@intel.com> Reviewed-by:
-
- 15 Nov, 2019 14 commits
-
-
Chris Wilson authored
This died many years ago as we now use i915_vma first and foremost. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191115170835.1367869-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
When telling the user that device power management is disabled, it is helpful to say which device that was. Signed-off-by:
Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191115122343.821331-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
Currently we're blindly poking at the frame start delay bits in PIPECONF when trying to sanitize the hardware state. Those bits decided to move elsewhere on HSW, so on many platforms we're not doing anything at all here. Also we're forgetting about the PCH transcoder entirely. Add all the bit definitions for the various homes these bits have had throughout the years, and reset them all to zero. However I'm not entirely sure this is a safe thing to do. If not I guess we'd want full readout+statecheck for this stuff. For now let's stick to the current logic and hope for the best. Signed-off-by:
Uma Shankar <uma.shankar@intel.com>
-
Chris Wilson authored
As the heartbeat has the effect of flushing context barriers, this interferes with the context barrier tests that are trying to observe them directly. Disable the heartbeat so that the barriers are as predictable as the test demands. Signed-off-by:
-
Chris Wilson authored
Verify that we can execute a long chain of dependent requests from userspace, each one slightly more important than the last. Signed-off-by:
-
Lionel Landwerlin authored
While we're waiting for the OA configuration to apply, let's give a chance to other contexts that might need to run other workloads. Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Suggested-by:
-
Chris Wilson authored
We need to wait until the timer object is marked as deactivated before unloading, so follow up our gentle cancel_delayed_work() with the synchronous variant to ensure it is flushed off a remote cpu before we mark the memory as freed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=111994Signed-off-by:
-
Chris Wilson authored
RC6 is tracked underneath the intel_gt, so use our local pointers. Signed-off-by:
Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191115114800.725061-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
It applies to all gen9 and gen10 now, so we can use a single test against the gen bitmask. Signed-off-by:
-
Chris Wilson authored
Inside the constructor, while cloning, we need to replace the dst->engines. Having forgotten that dst->engines is marked as RCU protected, we need to add the appropriate annotations to make sparse happy. Signed-off-by:
-
Chris Wilson authored
Our callers fall into two categories, those passing timeout=0 who just want to flush request retirements and those passing a timeout that need to wait for submission completion (e.g. intel_gt_wait_for_idle()). Currently, we only wait for a snapshot of timelines at the start of the wait (but there was an expectation that new requests would cause timelines to appear at the end). However, our callers, such as intel_gt_wait_for_idle() before suspend, do require us to wait for the power management requests emitted by retirement as well. If we don't, then it takes an extra second or two for the background worker to flush the queue and mark the GT as idle. Fixes: 7e805762 ("drm/i915: Drop struct_mutex from around i915_retire_requests()") Signed-off-by:
-
Jani Nikula authored
Backmerge to get dfce9025 ("Backmerge i915 security patches from commit 'ea0b163b' into drm-next") and thus 100d46bd ("Merge Intel Gen8/Gen9 graphics fixes from Jon Bloomfield."). Signed-off-by:
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Two minor cleanups / fixes for -next. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: =?UTF-8?q?Thomas=20Hellstr=C3=B6m=20=28VMware=29?= Link: https://patchwork.freedesktop.org/patch/msgid/20191114131703.8607-1-thomas_os@shipmail.org
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2019-11-14' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - PMU "Frequency" is reported as accumulated cycles - Avoid OOPS in dumb_create IOCTL when no CRTCs - Mitigation for userptr put_pages deadlock with trylock_page - Fix to avoid freeing heartbeat request too early - Fix LRC coherency issue - Fix Bugzilla #112212: Avoid screen corruption on MST - Error path fix to unlock context on failed context VM SETPARAM - Always consider holding preemption a privileged op in perf/OA - Preload LUTs if the hw isn't currently using them to avoid color flash on VLV/CHV - Protect context while grabbing its name for the request - Don't resize aliasing ppGTT size - Smaller fixes picked by tooling Signed-off-by:
-
- 14 Nov, 2019 15 commits
-
-
Daniele Ceraolo Spurio authored
With the new interrupt re-partitioning in Gen11, GuC controls by itself the interrupts it receives, so steering bits and registers have been defeatured. Being this the case, when the GuC is in control of submissions we won't know what to do with the ctx switch interrupt in the driver, so disable it. v2 (Daniele): replace the gen9 paths instead of keeping gen9 and gen11 functions since we won't support guc submission on any pre-gen11 platform. Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Reviewed-by:
John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
-
Imre Deak authored
The workaround to disable coarse power gating is still needed on SKL GT3/GT4 machines and since the RC6 context corruption was discovered by the hardware team also on all GEN9 machines. Restore applying the workaround. Fixes: c1132367 ("drm/i915: Extract GT render sleep (rc6) management") Testcase: igt/intel_gt_pm_late_selftests/live_rc6_ctx Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Signed-off-by:
-
Ville Syrjälä authored
HDMI_PICTURE_ASPECT_NONE is zero and the connector state is kzalloc()'d so no need to initialize conn_state->picture_aspect_ratio with it. Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Ville Syrjälä authored
HDMI_PICTURE_ASPECT_NONE means "Automatic" so when the user has that selected we should keep whatever aspect ratio the mode already has. Also no point in checking for connector->is_hdmi in the SDVO code since we only attach the property to HDMI connectors. Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Chris Wilson authored
As we want to be able to run inside atomic context for retiring the i915_active, and we are no longer allowed to abuse mutex_trylock, split the tree management portion of i915_active.mutex into an irq-safe spinlock. References: a0855d24 ("locking/mutex: Complain upon mutex API misuse in IRQ contexts") References: https://bugs.freedesktop.org/show_bug.cgi?id=111626 Fixes: 274cbf20 ("drm/i915: Push the i915_active.retire into a worker") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191114172535.1116-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Probe the mocs registers for new contexts and across GPU resets. Similar to intel_workarounds, we have tables of what register values we expect to see, so verify that user contexts are affected by them. In the future, we should add tests similar to intel_sseu to cover dynamic reconfigurations. Signed-off-by:
Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191112223600.30993-4-chris@chris-wilson.co.uk
-
Chris Wilson authored
We repeatedly (and more so in future) use the same looping construct over the mocs definition table to setup the register state. Refactor the loop construct into a reusable macro. add/remove: 2/1 grow/shrink: 1/2 up/down: 113/-330 (-217) Function old new delta intel_mocs_init_engine.cold - 71 +71 offset - 28 +28 __func__ 17273 17287 +14 intel_mocs_init 143 113 -30 mocs_register.isra 91 - -91 intel_mocs_init_engine 503 294 -209 Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191112223600.30993-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
As we always run new platforms through CI, we only need the debug code compiled in during CI runs. Signed-off-by:
-
Chris Wilson authored
Be consistent in our mocs setup on Tigerlake and set the unused control value to follow the PTE entry as we previously have done. The unused values are beyond the defines of the ABI, the consistency simplifies our checking. Signed-off-by:
-
Chris Wilson authored
fbdev uses the physical address of our framebuffer for its fb_mmap() routine. While we need to adapt this address for the new io BAR, we have to fix v5.4 first! The simplest fix is to restore the smem back to v5.3 and we will then probably have to implement our fbops->fb_mmap() callback to handle local memory. Reported-by:
Neil MacLeod <freedesktop@nmacleod.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112256 Fixes: 5f889b9a ("drm/i915: Disregard drm_mode_config.fb_base") Signed-off-by:
-
YueHaibing authored
drivers/gpu/drm/vmwgfx/vmwgfx_surface.c:339:22: warning: variable srf set but not used [-Wunused-but-set-variable] 'srf' is never used, so can be removed. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com>
-
Thomas Hellstrom authored
Drivers like vmwgfx may want to test whether the dma page pool is present or not. Since it's activated by default by TTM if compiled-in, define a hidden configuration option that the driver can test for. Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com>
-
Lionel Landwerlin authored
I'm observing incoherence metric values, changing from run to run. It appears the patches introducing noa wait & reconfiguration from command stream switched places in the series multiple times during the review. This lead to the dependency of one onto the order to go missing... Signed-off-by:
-
Dave Airlie authored
This backmerges the branch that ended up in Linus' tree. It removes all the changes for the rc6 patches from Linus' tree in favour of a patch that is based on a large refactor that occured. Otherwise it all looks good. Signed-off-by: -
Imre Deak authored
In some circumstances the RC6 context can get corrupted. We can detect this and take the required action, that is disable RC6 and runtime PM. The HW recovers from the corrupted state after a system suspend/resume cycle, so detect the recovery and re-enable RC6 and runtime PM. v2: rebase (Mika) v3: - Move intel_suspend_gt_powersave() to the end of the GEM suspend sequence. - Add commit message. v4: - Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API change. v5: - Rebased on latest upstream gt_pm refactoring. v6: - s/i915_rc6_/intel_rc6_/ - Don't return a value from i915_rc6_ctx_wa_check(). v7: - Rebased on latest gt rc6 refactoring. Signed-off-by:
-
- 13 Nov, 2019 5 commits
-
-
Radhakrishna Sripada authored
Extend disabling SAMPLER_STATE prefetch workaround to gen12. v2: Limit the WA to TGL A0 and update the WA no(Chris) BSpec: 52890 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
-
Dave Airlie authored
This is a pretty simple improvement that allows to find encoder as the one and only (ARC PGU doesn't support more than one) endpoint instead of using non-standard "encoder-slave" property. Signed-off-by:
-
Bruce Chang authored
io_mapping_map_atomic/kmap_atomic are occasionally taken in error capture (if there is no aperture preallocated for the use of error capture), but the error capture and compression routines are now run in normal context: <3> [113.316247] BUG: sleeping function called from invalid context at mm/page_alloc.c:4653 <3> [113.318190] in_atomic(): 1, irqs_disabled(): 0, pid: 678, name: debugfs_test <4> [113.319900] no locks held by debugfs_test/678. <3> [113.321002] Preemption disabled at: <4> [113.321130] [<ffffffffa02506d4>] i915_error_object_create+0x494/0x610 [i915] <4> [113.327259] Call Trace: <4> [113.327871] dump_stack+0x67/0x9b <4> [113.328683] ___might_sleep+0x167/0x250 <4> [113.329618] __alloc_pages_nodemask+0x26b/0x1110 <4> [113.334614] pool_alloc.constprop.19+0x14/0x60 [i915] <4> [113.335951] compress_page+0x7c/0x100 [i915] <4> [113.337110] i915_error_object_create+0x4bd/0x610 [i915] <4> [113.338515] i915_capture_gpu_state+0x384/0x1680 [i915] However, it is not a good idea to run the slow compression inside atomic context, so we choose not to. Fixes: 895d8ebe ("drm/i915: error capture with no ggtt slot") Signed-off-by:
Bruce Chang <yu.bruce.chang@intel.com> Reviewed-by:
Brian Welty <brian.welty@intel.com> Reviewed-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2019-11-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - Fix memory leak in gpu debugfs node's release (Johan) Cc: Johan Hovold <johan@kernel.org> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-next-5.5-2019-11-08: amdgpu: - Enable VCN dynamic powergating on RV/RV2 - Fixes for Navi14 - Misc Navi fixes - Fix MSI-X tear down - Misc Arturus fixes - Fix xgmi powerstate handling - Documenation fixes scheduler: - Fix static code checker warning - Fix possible thread reactivation while thread is stopped - Avoid cleanup if thread is parked radeon: - SI dpm fix ported from amdgpu Signed-off-by:
-
