- 02 Jun, 2014 11 commits
-
-
David S. Miller authored
Daniel Borkmann says: ==================== BPF + test suite updates These are the last bigger BPF changes that I had in my todo queue for now. As the first two patches from this series contain additional test cases for the test suite, I have rebased them on top of current net-next with the set from [1] applied to avoid introducing any unnecessary merge conflicts. For details, please refer to the individual patches. Test suite runs fine with the set applied. [1] http://patchwork.ozlabs.org/patch/352599/ http://patchwork.ozlabs.org/patch/352600/ ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
Commit 9739eef1 ("net: filter: make BPF conversion more readable") started to introduce helper macros similar to BPF_STMT()/BPF_JUMP() macros from classic BPF. However, quite some statements in the filter conversion functions remained in the old style which gives a mixture of block macros and non block macros in the code. This patch makes the block macros itself more readable by using explicit member initialization, and converts the remaining ones where possible to remain in a more consistent state. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Daniel Borkmann authored
This patch finally allows us to get rid of the BPF_S_* enum. Currently, the code performs unnecessary encode and decode workarounds in seccomp and filter migration itself when a filter is being attached in order to overcome BPF_S_* encoding which is not used anymore by the new interpreter resp. JIT compilers. Keeping it around would mean that also in future we would need to extend and maintain this enum and related encoders/decoders. We can get rid of all that and save us these operations during filter attaching. Naturally, also JIT compilers need to be updated by this. Before JIT conversion is being done, each compiler checks if A is being loaded at startup to obtain information if it needs to emit instructions to clear A first. Since BPF extensions are a subset of BPF_LD | BPF_{W,H,B} | BPF_ABS variants, case statements for extensions can be removed at that point. To ease and minimalize code changes in the classic JITs, we have introduced bpf_anc_helper(). Tested with test_bpf on x86_64 (JIT, int), s390x (JIT, int), arm (JIT, int), i368 (int), ppc64 (JIT, int); for sparc we unfortunately didn't have access, but changes are analogous to the rest. Joint work with Alexei Starovoitov. Signed-off-by:Chema Gonzalez <chemag@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
This check tests that overloading BPF_LD | BPF_ABS with an always invalid BPF extension, that is SKF_AD_MAX, fails to make sure classic BPF behaviour is correct in filter checker. Also, we add a test for loading at packet offset SKF_AD_OFF-1 which should pass the filter, but later on fail during runtime. Signed-off-by:
-
Daniel Borkmann authored
Also add a test for the scratch memory store that first fills all slots and then sucessively reads all of them back adding up to A, and eventually returning A. This and the previous M[] test with alternating fill/spill will detect possible JIT errors on M[]. Suggested-by:
-
wangweidong authored
As commit 2796d0c6 ("bridge: Automatically manage port promiscuous mode."), make the add_if use dev_set_allmulti instead of dev_set_promiscuous, so when add_if failed, we should do dev_set_allmulti(dev, -1). Signed-off-by:
Wang Weidong <wangweidong1@huawei.com> Reviewed-by:
Amos Kong <akong@redhat.com> Acked-by:
Vlad Yasevich <vyasevic@redhat.com> Acked-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
David S. Miller authored
This reverts commit 70a640d0 ("net/mlx4_en: Use affinity hint") and commit c8865b64 ("cpumask: Utility function to set n'th cpu - local cpu first") because these changes break the build when SMP is disabled amongst other things. Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Stephen Boyd authored
We shouldn't be using regulator_get_optional() here. These regulators are always present as part of the physical design and there isn't any way to use an internal regulator or change the source of the reference voltage via software. Given that the only users of this driver in the kernel are DT based, this change should be transparent to them even if they don't specify any supplies because the regulator framework will insert dummy supplies as needed. Cc: Nishanth Menon <nm@ti.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Reviewed-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
David S. Miller authored
Amir Vadai says: ==================== cpumask,net: Affinity hint helper function This patchset will set affinity hint to influence IRQs to be allocated on the same NUMA node as the one where the card resides. As discussed in http://www.spinics.net/lists/netdev/msg271497.html If the number of IRQs allocated is greater than the number of local NUMA cores, all local cores will be used first, and the rest of the IRQs will be on a remote NUMA node. If no NUMA support - IRQ's and cores will be mapped 1:1 Since the utility function to calculate the mapping could be useful in other mq drivers in the kernel, it was added to cpumask.[ch] This patchset was tested and applied on top of net-next since the first consumer is a network device (mlx4_en). Over commit 506724c4: "tg3: Override clock, link aware and link idle mode during NVRAM dump" I couldn't find a maintainer for cpumask.c, so only added the kernel mailing list Amir Changes from V5: - Moved the utility function from kernel/irq/manage.c to lib/cpumask.c, and renamed it's name accordingly to cpumask_set_cpu_local_first() - Added some comments as Thomas Gleixner suggested - Changed -EINVAL to -EAGAIN, that describes the error situtation better. Changes from V4: - Patch 1/2: irq: Utility function to get affinity_hint by policy Thank you Ben for the great review: - Moved the function it kernel/irq/manage.c since it could be useful for block mq devices - Fixed Typo's - Use cpumask_t * instead of cpumask_var_t in function header - Restructured the function to remove NULL assignment in a cpumask_var_t - Fix for offline local CPU's Changes from V3: - Patch 2/2: net/mlx4_en: Use affinity hint - somehow patch file was corrupted Changes from V2: - Patch 1/2: net: Utility function to get affinity_hint by policy - Fixed style issues Changes from V1: - Patch 1/2: net: Utility function to get affinity_hint by policy - Fixed error flow to return -EINVAL on error (thanks govind) - Patch 2/2: net/mlx4_en: Use affinity hint - Set ring->affinity_hint to NULL on error Changes from V0: - Fixed small style issues ==================== Signed-off-by:
-
Yuval Atias authored
The “affinity hint” mechanism is used by the user space daemon, irqbalancer, to indicate a preferred CPU mask for irqs. Irqbalancer can use this hint to balance the irqs between the cpus indicated by the mask. We wish the HCA to preferentially map the IRQs it uses to numa cores close to it. To accomplish this, we use cpumask_set_cpu_local_first(), that sets the affinity hint according the following policy: First it maps IRQs to “close” numa cores. If these are exhausted, the remaining IRQs are mapped to “far” numa cores. Signed-off-by:
Yuval Atias <yuvala@mellanox.com> Signed-off-by:
Amir Vadai <amirv@mellanox.com> Signed-off-by:
-
Amir Vadai authored
This function sets the n'th cpu - local cpu's first. For example: in a 16 cores server with even cpu's local, will get the following values: cpumask_set_cpu_local_first(0, numa, cpumask) => cpu 0 is set cpumask_set_cpu_local_first(1, numa, cpumask) => cpu 2 is set ... cpumask_set_cpu_local_first(7, numa, cpumask) => cpu 14 is set cpumask_set_cpu_local_first(8, numa, cpumask) => cpu 1 is set cpumask_set_cpu_local_first(9, numa, cpumask) => cpu 3 is set ... cpumask_set_cpu_local_first(15, numa, cpumask) => cpu 15 is set Curently this function will be used by multi queue networking devices to calculate the irq affinity mask, such that as many local cpu's as possible will be utilized to handle the mq device irq's. Signed-off-by:
-
- 31 May, 2014 24 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next This small patchset contains three accumulated Netfilter/IPVS updates, they are: 1) Refactorize common NAT code by encapsulating it into a helper function, similarly to what we do in other conntrack extensions, from Florian Westphal. 2) A minor format string mismatch fix for IPVS, from Masanari Iida. 3) Add quota support to the netfilter accounting infrastructure, now you can add quotas to accounting objects via the nfnetlink interface and use them from iptables. You can also listen to quota notifications from userspace. This enhancement from Mathieu Poirier. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-nextDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e and i40evf. Kevin updates the i40e and i40evf driver i40e_check_asq_alive() to ensure the length register offset is non-zero which indicates that the software has initialized the admin queue. Also removes PCTYPE definitions which are now reserved. Mitch enables descriptor prefetch for rings belonging to the virtual function. Also configures the VF minimum transmit rate to 50 Mbps rather than 0 which was be interpreted as no limit at all. Mitch found in order for the VF to achieve its programmed transmit rate, we need to set the max credit value to 4. Lastly fixes a Tx hang and firmware crash that happens after setting the MTU on a VF by not using the RESETTING state during reinit, this is because the RESETTING state means that a catastrophic hardware bad thing is happening and the driver needs to tiptoe around and not use the admin queue or registers. A reinit is no big deal and we can use the admin queue (and we should) so do not set the state to RESETTING during reinit to resolve the bug. Akeem changes the declaration of the transmit and receive rings inside several loops to eliminate declaring the same ring every time for the duration of the loop and declares them just once before the loop. Also fixes the driver to clear the recovery pending bit if pf_reset fails instead of falling through the setup process. Anjali makes a change based on feedback from Ben Hutchings that cmd->data needs to be reported in ETHTOOL_GRXCLSRLCNT and use a helper function to calculate the total filter count. Jesse removes storm control since the storm control features are not apart of the hardware and were mistakenly left in the code. Greg changes tx_lpi_status and rx_lpi_status from bool to u32 to avoid sparse errors. Shannon adds the clear_pxe AdminQ API call to tell the firmware that the driver is taking over from PXE. In addition, relaxes the firmware API check to allow more flexibility in handling newer NICs and NVMs in the field. Vasu ensures that FCoE is disabled for MFP modes since it is not supported by overriding the hardware FCoE capability. ==================== Signed-off-by: -
Himangi Saraogi authored
This patch replaces a comma between expression statements by a semicolon. A simplified version of the semantic patch that performs this transformation is as follows: // <smpl> @r@ expression e1,e2,e; type T; identifier i; @@ e1 -, +; e2; // </smpl> Signed-off-by:
Himangi Saraogi <himangi774@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Himangi Saraogi authored
This patch replaces a comma between expression statements by a semicolon. A simplified version of the semantic patch that performs this transformation is as follows: // <smpl> @r@ expression e1,e2,e; type T; identifier i; @@ e1 -, +; e2; // </smpl> Signed-off-by:
-
Himangi Saraogi authored
This patch replaces a comma between expression statements by a semicolon. A simplified version of the semantic patch that performs this transformation is as follows: // <smpl> @r@ expression e1,e2,e; type T; identifier i; @@ e1 -, +; e2; // </smpl> Signed-off-by:
-
Himangi Saraogi authored
This patch replaces a comma between expression statements by a semicolon. A simplified version of the semantic patch that performs this transformation is as follows: // <smpl> @r@ expression e1,e2,e; type T; identifier i; @@ e1 -, +; e2; // </smpl> Signed-off-by:
-
David S. Miller authored
Frank Blaschka says: ==================== s390: network patches for net-next V1 here are some s390 related patches for net-next Added some style fixing reported by David Laight. ==================== Signed-off-by: -
Ursula Braun authored
cppcheck blamed some issues in drivers/s390/net/... They are fixed here. Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <blaschka@linux.vnet.ibm.com> Reported-by:
Toralf Foerster <toralf.foerster@gmx.de> Signed-off-by:
-
Rickard Strandqvist authored
There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Ursula Braun authored
In case of transport HIPER a sock struct is allocated for an incoming connect request. If the backlog queue is full this socket is not needed, but is left in the list of af_iucv sockets. Final socket release posts console message "Attempt to release alive iucv socket". This patch makes sure the new created socket is cleaned up correctly if the backlog queue is full. Signed-off-by:
Philipp Hachtmann <phacht@linux.vnet.ibm.com> Signed-off-by:
-
Philipp Hachtmann authored
If a socket is bound to an address using before calling connect it is usual to leave it to the network system to choose an appropriate outgoing application name respective port address. af_iucv on VM uses a counter and uses simple numbers as unique identifiers. This behaviour was missing when af_iucv is used with HiperSockets. This patch contains a simple approach to harmonize af_iucv's behaviour. Signed-off-by:
-
David S. Miller authored
Sathya Perla says: ==================== be2net: patch set Patch 1 is a minor optimization for issuing multicast promisc FW cmd only when the interface is not already in that mode. Patch 2 provides support for VF TX-rate setting on Skyhawk-R. Patch 3 provides support for flashing new FW flash regions. Patches 4, 5, 6 cleanup the MCC processing (for FW cmds) code in be_cmds.c. The MCC error reporting and event handling code are areas that needed cleanup. ==================== Signed-off-by: -
Sathya Perla authored
The MCC async event processing code has 2 issues: a) because of long struct names the code indentation is badly broken b) description and definitions of how an MCC completion is interpreted as an async event are confusing (for e.g. the last word of an MCC event is named "code", while "code" is just a sub-field of the last word.) This patch fixes the structure definitions, comments and re-factors code as needed. Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
-
Sathya Perla authored
For some FW cmds, the caller just issues the cmd and doesn't wait for a response. The response handling is done in the MCCQ compl processing context only. Move this code into a separate routine to make be_mcc_compl_process() more manageable. Signed-off-by:
-
Kalesh AP authored
This patch improves MCCQ error status handling in the following ways: a) A MCC cmd completion returns a base-status and an addl-status. So far, the routine be_mcc_compl_process() returned only the "status" value. Now, embedd both statuses in the return value and let the caller routine access the value of interest using base_status() and addl_status() macros. b) Rename variables accordingly (base/addl) to avoid confusion while error checking. b) Some of the errors returned by FW are harmless and so an error msg is not logged for such errors. Capture this logic in a separate routine to make the code more readable. Signed-off-by:
Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by:
-
Vasundhara Volam authored
Certain new flash regions have been added to Skyhawk-R FW image. The newer FW images specify op_types for each region. A region is flashed only when it's CRC doesn't match that of the region on the HW flash. While upgrading to a new FW image the driver is expected to tolerate certain errors. This patch re-factors code under be_flash() to support the above scheme. Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
-
Ravikumar Nelavelli authored
Skyhawk-R FW supports TX-rate setting only as a % value of the link speed, set via the SET_PROFILE_CONFIG cmd. This patch makes the necessary changes to the FW cmd descriptors to support the above change and also introduces checks in be_set_vf_tx_rate() to allow only discrete values (that map to % of the link-speed). Signed-off-by:
-
Kalesh AP authored
Set mc-promisc (multicast promiscuous) mode on an interface, only if it is *not already* in that mode. Also removed logs that report interface being set to multicast promiscous mode. In an earlier comment on the netdev list such log messages were deemed unnecessary as this behaviour is common across most of the ethernet drivers. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-nextDavid S. Miller authored
John W. Linville says: ==================== Please pull this batch of updates intended for 3.16... For the mac80211 bits, Johannes says: "Here I just have Heikki's rfkill GPIO cleanups. The ARM/tegra patch is OK with the maintainer (Stephen). Let me know of any problems." and; "We have a whole bunch of work on CSA by Andrei, Luca and Michal, but unfortunately it doesn't seem quite complete yet so it's still disabled. There's some TDLS work from Arik, and the rest is mostly minor fixes and cleanups." For the NFC bits, Samuel says: "This is the NFC pull request for 3.16. We have: - STMicroeectronics st21nfca support. The st21nfca is an HCI chipset and thus relies on the HCI stack. This submission provides support for tag redaer/writer mode (including Type 5) and device tree bindings. - PM runtime support and a bunch of bug fixes for TI's trf7970a. - Device tree support for NXP's pn544. Legacy platform data support is obviously kept intact. - NFC Tag type 4B support to the NFC Digital stack. - SOCK_RAW type support to the raw NFC socket, and allow NCI sniffing from that. This can be extended to report HCI frames and also proprietarry ones like e.g. the pn533 ones." For the iwlwifi bits, Emmanuel says: "Eran continues to work on new devices, Eyal is still digging in the rate control stuff, and Johannes added new functionality to the debug system we have in place now along with a few cleanups he made on the way. That's pretty much it." and; "Avri continues to work on the power code and Eran is improving the NVM handling as a preparations for new devices on which he works with Liad. Luca cleans up a bit the code while working on CSA. I have the regular BT Coex stuff and a small lockdep fix. Johannes has his regular amount of clean ups and improvements, the main one is the ability to leave 2 chains open to improve diversity and hence the throughput in high attenuation scenarios." and; "The regular amount of housekeeping here. I merged iwlwifi-fixes.git to be able to add the patch you didn't want in wireless.git at that stage of the -rc cycle. Luca has a few preparations for CSA implementation and also what seems to be a bugfix for P2P but hasn't caused issues we could notice." For the Atheros bits, Kalle says: "For ath10k Michal did various small fixes on how we handle hardware/firmware problems and he also fixed two memory leaks." Also included are a couple of pulls from the wireless tree to avoid/resolve merge issues... ==================== Signed-off-by: -
Paul Bolle authored
This preprocessor check is commented out ever since this file was added during the v2.3 development cycle. It is unclear what it purpose might have been. Whatever it was, it can safely be removed now. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Tobias Klauser authored
The memory for private data is allocated using kzalloc/vzalloc in alloc_netdev_mqs, thus there is no need to zero it again in the driver. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Acked-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
-
Tobias Klauser authored
Use is_zero_ether_addr() to check for the MAC address being all zeros instead of open coding the check. Also use ether_addr_copy() instead of a manual memcpy() to set the netdev->dev_addr. Furthermore, get rid of a redundant assignment of netdev->addr_len. This is already set by ether_setup() which is called in tile_net_setup(). Signed-off-by:
-
Ariel Elior authored
The bnx2x development team has transferred from Broadcom to Qlogic. This patch updates some obsolete email addresses to usable ones. The bnx2x files contain headers with legal information from Broadcom. Qlogic Legal depratment is taking their time coming up with their own legal info. So this patch only updates contact information. I will follow up with a patch for the headers once I have the required info. Signed-off-by:
Ariel Elior <ariel.elior@qlogic.com> Signed-off-by:
-
Nimrod Andy authored
when system suspend, need to set pins to low power state to save IO power consumption, there are three states of pinctrl: "default", "idle" and "sleep". Currently enet supports default and sleep state. Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
- 30 May, 2014 5 commits
-
-
Daniel Borkmann authored
This patch converts raw opcodes for tcpdump tests into BPF_STMT()/BPF_JUMP() combinations, which brings it into conformity with the rest of the patches and it also makes life easier to grasp what's going on in these particular test cases when they ever fail. Also arrange payload from the jump+holes test in a way as we have with other packet payloads in the test suite. Signed-off-by:
-
Daniel Borkmann authored
This test for classic BPF probes stores and load combination via X on all 16 registers of the scratch memory store. It initially loads integer 100 and passes this value around to each register while incrementing it every time, thus we expect to have 116 as a result. Might be useful for JIT testing. Signed-off-by:
-
Benoit Taine authored
This issue was reported by coccicheck using the semantic patch at scripts/coccinelle/api/memdup.cocci Signed-off-by:
Benoit Taine <benoit.taine@lip6.fr> Signed-off-by:
-
Govindarajulu Varadarajan authored
Division of a 32 bit number by a 64 bit number causes the following link error introduced by 7c2ce6e6 "enic: Add support for adaptive interrupt coalescing" drivers/built-in.o: In function `enic_poll_msix': enic_main.c:(.text+0x48710a): undefined reference to `__udivdi3' make: *** [vmlinux] Error 1 Since numerator is 32 bit, convert denominator to 32 bit accordingly. Fixes: 7c2ce6e6 ("enic: Add support for adaptive interrupt coalescing") Reported-by:
Jim Davis <jim.epost@gmail.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sujith Sankar <ssujith@cisco.com> Cc: Neel Patel <neepatel@cisco.com> Signed-off-by:
Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by:
-
Sachin Kamat authored
Export the symbols to fix the below errors when built as modules: ERROR: "tso_build_data" [drivers/net/ethernet/marvell/mvneta.ko] undefined! ERROR: "tso_build_hdr" [drivers/net/ethernet/marvell/mvneta.ko] undefined! ERROR: "tso_start" [drivers/net/ethernet/marvell/mvneta.ko] undefined! ERROR: "tso_count_descs" [drivers/net/ethernet/marvell/mvneta.ko] undefined! ERROR: "tso_build_data" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined! ERROR: "tso_build_hdr" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined! ERROR: "tso_start" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined! ERROR: "tso_count_descs" [drivers/net/ethernet/marvell/mv643xx_eth.ko] undefined! Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
-
