- 01 Aug, 2014 23 commits
-
-
Jeffrey Deans authored
The GICBIS macro could update the GIC registers incorrectly, depending on the data value passed in: * Bits were only OR'd into the register data, so register fields could not be cleared. * Bits were OR'd into the register data without masking the data to the correct field width, corrupting adjacent bits. Signed-off-by:
Jeffrey Deans <jeffrey.deans@imgtec.com> Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7378/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Jeffrey Deans authored
The Malta malta_ipi_irqdispatch() routine now checks only IPI interrupts when handling IPIs. It could previously call do_IRQ() for non-IPIs, and also call do_IRQ() with an invalid IRQ number if there were no pending GIC interrupts when gic_get_int() was called. Signed-off-by:
-
Jeffrey Deans authored
Move most of the functionality of gic_get_int() into a new function gic_get_int_mask() which takes a bitmask of interrupts in which the caller is interested, and returns the subset which are pending for the current CPU. This allows CP0 IRQ dispatch routines to check only the GIC interrupts which are routed to a particular CPU interrupt input. gic_get_int() is reimplemented using gic_get_int_mask() and is retained for use by any platforms for which gic_get_int() is sufficient. Signed-off-by:
-
Jeffrey Deans authored
A GIC interrupt which is declared as having a GIC_MAP_TO_NMI_MSK mapping causes the cpu parameter to gic_setup_intr() to be increased to 32, causing memory corruption when pcpu_masks[] is written to again later in the function. Signed-off-by:
-
Jeffrey Deans authored
irq-gic.c:gic_get_int() masks out interrupts from the pending set which aren’t in the pcpu_mask. Only interrupts marked with GIC_FLAG_IPI were set in pcpu_mask, meaning that peripheral interrupts also had to be marked as IPIs. Remove the use of GIC_FLAG_IPI and allow the flags member of struct gic_intr_map to be zero. Signed-off-by:
-
Jeffrey Deans authored
The value of GIC_NUM_INTRS is platform-specific. Using a default value from gic.h will result in incorrect behaviour on some systems, so require a suitable definition to be present in the platform's irq.h. Signed-off-by:
-
Jeffrey Deans authored
Several bitmaps are declared in arch/mips/include/asm/gic.h, but the scope of their use is limited to arch/mips/kernel/irq-gic.c. Move the declarations from the header file to the C file. Signed-off-by:
-
Leonid Yegoshin authored
Detect if the core supports unique exception codes for the Read-Inhibit and Execute-Inhibit exceptions and set the option accordingly. The RI/XI exception support is detected by setting the 27th bit (IEC) of the PageGrain C0 register and reading back the value of that register to verify the bit is enabled. Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by:
-
Leonid Yegoshin authored
Use the regular tlb_do_page_fault_0 (no write) handler to handle the RI and XI exceptions. Also skip the RI/XI validation check on TLB load handler since it's redundant when the CPU has unique RI/XI exceptions. Singed-off-by:
-
Leonid Yegoshin authored
MIPSr5 added support for unique exception codes for the Read-Inhibit and Execute-Inhibit exceptions. Signed-off-by:
-
Markos Chandras authored
The Hardware Page Table Walker aims to speed up TLB refill exceptions by handling them in the hardware level instead of having a software TLB refill handler. However, a TLB refill exception can still be thrown in certain cases such as, synchronus exceptions, or address translation or memory errors during the HTW operation. As a result of which, HTW must not be considered a complete replacement for the TLB refill software handler, but rather a fast-path for it. For HTW to work, the PWBase register must contain the task's page global directory address so the HTW will kick in on TLB refill exceptions. Due to HTW being a separate engine embedded deep in the CPU pipeline, we need to restart the HTW everytime a PTE changes to avoid HTW fetching a old entry from the page tables. It's also necessary to restart the HTW on context switches to prevent it from fetching a page from the previous process. Finally, since HTW is using the entryhi register to write the translations to the TLB, it's necessary to stop the HTW whenever the entryhi changes (eg for tlb probe perations) and enable it back afterwards. == Performance == The following trivial test was used to measure the performance of the HTW. Using the same root filesystem, the following command was used to measure the number of tlb refill handler executions with and without (using 'nohtw' kernel parameter) HTW support. The kernel was modified to use a scratch register as a counter for the TLB refill exceptions. find /usr -type f -exec ls -lh {} \; HTW Enabled: TLB refill exceptions: 12306 HTW Disabled: TLB refill exceptions: 17805 Signed-off-by: -
Markos Chandras authored
Detect if the core implements the HTW and set the option accordingly. Also, add a new kernel parameter called 'nohtw' allowing the user to disable the htw support and fallback to the software refill handler. Signed-off-by:
-
Markos Chandras authored
Signed-off-by:
-
Markos Chandras authored
Moreover, report hardware page table walker support as 'htw' in the ASE list of /proc/cpuinfo, if the core implements this feature. Signed-off-by:
-
Markos Chandras authored
Long integers which are 4 bytes in MIPS32 can't hold new CPU options anymore, so the type of the 'options' variable is changed to unsigned long long which allows 32 more cpu options to be defined for MIPS32 Also, re-arrange the 'options' struct member to avoid potential 4-byte alignment gap in the middle of the struct. Signed-off-by:
-
James Hogan authored
Add cases in perf_event_mipsxx.c for CPU_P5600. All the event numbers listed for proAptiv also apply to P5600, so we use mipsxxcore_event_map2 and mipsxxcore_cache_map2 too, but the P5600 has 8-bit event numbers so bit 8 (256) of the user ABI config is used for the parity bit (to specify odd/even counter events). Signed-off-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
-
James Hogan authored
In mipsxx_pmu_map_raw_event(), set event_id to base_id after the cpu type conditional code to allow that code to override the base_id to use more bits from the config and a higher bit for parity. This will allow cores with up to 512 events between all even/odd counters (an 8-bit event id) such as P5600 to use bit 8 for parity. Signed-off-by:
-
Alex Smith authored
This header defines an exported interface (the register layout used in core dumps and the GP regset accessible with PTRACE_{GET,SET}REGSET), therefore belongs in uapi. Signed-off-by:Alex Smith <alex@alex-smith.me.uk> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7458/Signed-off-by:
-
Alex Smith authored
The struct user definition in this file is not used anywhere (the ELF core dumper does not use that format). Therefore, remove the header and instead enable the asm-generic user.h which is an empty header to satisfy a few generic headers which still try to include user.h. Signed-off-by:
-
Alex Smith authored
Since the core dumper now uses regsets, the old core dump functions are now unused. Remove them. Signed-off-by:
-
Alex Smith authored
In uapi/asm/ptrace.h, a user version of pt_regs is defined wrapped in ifndef __KERNEL__. This structure definition does not match anything used by any kernel API, in particular it does not match the format used by PTRACE_{GET,SET}REGS. Therefore, replace the structure definition with one matching what is used by PTRACE_{GET,SET}REGS. The format used by these is the same for both 32-bit and 64-bit. Also, change the implementation of PTRACE_{GET,SET}REGS to use this new structure definition. The structure is renamed to user_pt_regs when __KERNEL__ is defined to avoid conflicts with the kernel's own pt_regs. Signed-off-by: -
Alex Smith authored
A comment in the O32/32-bit system call code is incorrect since commit 46e12c07 ("MIPS: O32 / 32-bit: Always copy 4 stack arguments."). Remove it. Signed-off-by:
-
Alex Smith authored
On 32-bit/O32, pt_regs has a padding area at the beginning into which the syscall arguments passed via the user stack are copied. 4 arguments totalling 16 bytes are copied to offset 16 bytes into this area, however the area is only 24 bytes long. This means the last 2 arguments overwrite pt_regs->regs[{0,1}]. If a syscall function returns an error, handle_sys stores the original syscall number in pt_regs->regs[0] for syscall restart. signal.c checks whether regs[0] is non-zero, if it is it will check whether the syscall return value is one of the ERESTART* codes to see if it must be restarted. Should a syscall be made that results in a non-zero value being copied off the user stack into regs[0], and then returns a positive (non-error) value that matches one of the ERESTART* error codes, this can be mistaken for requiring a syscall restart. While the possibility for this to occur has always existed, it is made much more likely to occur by commit 46e12c07 ("MIPS: O32 / 32-bit: Always copy 4 stack arguments."), since now every syscall will copy 4 arguments and overwrite regs[0], rather than just those with 7 or 8 arguments. Since that commit, booting Debian under a 32-bit MIPS kernel almost always results in a hang early in boot, due to a wait4 syscall returning a PID that matches one of the ERESTART* codes, which then causes an incorrect restart of the syscall. The problem is fixed by increasing the size of the padding area so that arguments copied off the stack will not overwrite pt_regs->regs[{0,1}]. Signed-off-by:Alex Smith <alex.smith@imgtec.com> Cc: <stable@vger.kernel.org> # v3.13+ Reviewed-by:
Aurelien Jarno <aurelien@aurel32.net> Tested-by:
-
- 30 Jul, 2014 17 commits
-
-
Alex Smith authored
Commit 6a9c001b ("MIPS: Switch ELF core dumper to use regsets.") switched the core dumper to use regsets, however the GP regset code simply makes a direct copy of the kernel's pt_regs, which does not match the original core dump register layout as defined in asm/reg.h. Furthermore, the definition of pt_regs can vary with certain Kconfig variables, therefore the GP regset can never be relied upon to return registers in the same layout. Therefore, this patch changes the GP regset to match the original core dump layout. The layout differs for 32- and 64-bit processes, so separate implementations of the get/set functions are added for the 32- and 64-bit regsets. Signed-off-by:
-
Alex Smith authored
Get rid of the WANT_COMPAT_REG_H test and instead define both the 32- and 64-bit register offset definitions at the same time with MIPS{32,64}_ prefixes, then define the existing EF_* names to the correct definitions for the kernel's bitness. This patch is a prerequisite of the following bug fix patch. Signed-off-by: -
Alex Smith authored
task_user_regset_view() should test for TIF_32BIT_REGS in the flags of the specified task, not of the current task. Signed-off-by:
-
Alex Smith authored
Whenever ptrace attempts to retrieve the FPU implementation register it accesses it through current_cpu_data, which calls smp_processor_id(). Since the code may execute with preemption enabled, this can trigger a warning. Fix this by using boot_cpu_data to get the IR instead. Signed-off-by:
-
Rafał Miłecki authored
So far BCM47XX can only detect amount of HIGHMEM. It still requires adding (registering) and well-testing before enabling by default. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7396/Signed-off-by:
-
Rafał Miłecki authored
This reverts commit d7a887a7. Function add_temporary_entry is needed by bcm47xx to support highmem. We need to add a temporary entry to check for amount of RAM. The only change made in this revert was replacing (ENTER|EXIT)_CRITICAL. Signed-off-by:
-
Rafał Miłecki authored
Detect more devices and register leds & buttons for them. Signed-off-by:
-
Rafał Miłecki authored
It seems that bcm47xx can handle only 128 MiB of RAM directly. There are few devices with 256 MiB, but Broadcom's SDK uses highmem to handle anything above 128 MiB. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Reported-by:
Catalin Patulea <cat@vv.carleton.ca> Signed-off-by:
-
Rafał Miłecki authored
Catalin reported that GPIOs used by bcm47xx don't match layout of his WRT54GS V1.0 board. It seems we need to distinguish these 54G* devices. Reported-by:
-
Huacai Chen authored
Since this CONFIG option will be used for both Loongson-3A/3B machines, and not all Loongson-3 machines are produced by Lemote, we rename CONFIG_LEMOTE_MACH3A to CONFIG_LOONGSON_MACH3X. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/7190/Signed-off-by:
-
Huacai Chen authored
Loongson-3 has some specific instructions (MMI/SIMD) in coprocessor 2. COP2 isn't independent because it share COP1 (FPU)'s registers. This patch enable the COP2 usage so user-space programs can use the MMI/SIMD instructions. When COP2 exception happens, we enable both COP1 (FPU) and COP2, only in this way the fp context can be saved and restored correctly. Signed-off-by:
-
Huacai Chen authored
Loongson-3B is a 8-cores processor. In general it looks like there are two Loongson-3A integrated in one chip: 8 cores are separated into two groups (two NUMA node), each node has its own local memory. Of course there are some differences between one Loongson-3B and two Loongson-3A. E.g., the base addresses of IPI registers of each node are not the same; Loongson-3A use ChipConfig register to enable/disable clock, but Loongson-3B use FreqControl register instead. There are two revision of Loongson-3B, the first revision is called as Loongson-3B1000, whose frequency is 1GHz and has a PRid 0x6306, the second revision is called as Loongson-3B1500, whose frequency is 1.5GHz and has a PRid 0x6307. Both revisions has a bug that clock cannot be disabled at runtime, but this will be fixed in future. Signed-off-by:
-
Huacai Chen authored
Enable sys_mbind()/sys_get_mempolicy()/sys_set_mempolicy() for O32, N32, and N64 ABIs. By the way, O32/N32 should use the compat version of sys_migrate_pages()/sys_move_pages(), so fix that. Signed-off-by:
-
Huacai Chen authored
Multiple Loongson-3A chips can be interconnected with HT0-bus. This is a CC-NUMA system that every chip (node) has its own local memory and cache coherency is maintained by hardware. The 64-bit physical memory address format is as follows: 0x-0000-YZZZ-ZZZZ-ZZZZ The high 16 bits should be 0, which means the real physical address supported by Loongson-3 is 48-bit. The "Y" bits is the base address of each node, which can be also considered as the node-id. The "Z" bits is the address offset within a node, which means every node has a 44 bits address space. Macros XPHYSADDR and MAX_PHYSMEM_BITS are modified unconditionally, because many other MIPS CPUs have also extended their address spaces. Signed-off-by:
-
Huacai Chen authored
This patch is prepared for Multi-chip interconnection. Since each chip has a ChipConfig register, LOONGSON_CHIPCFG should be an array. Signed-off-by:
-
