- 20 Feb, 2019 40 commits
-
-
Vitaly Kuznetsov authored
commit 6b1971c6 upstream. SDM says MSR_IA32_VMX_PROCBASED_CTLS2 is only available "If (CPUID.01H:ECX.[5] && IA32_VMX_PROCBASED_CTLS[63])". It was found that some old cpus (namely "Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0x6") don't have it. Add the missing check. Reported-by:
Zdenek Kaspar <zkaspar82@gmail.com> Tested-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Jim Mattson <jmattson@google.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Stefan O'Rear authored
commit e3613bb8 upstream. Previously, invalid PTEs and swap PTEs had the same binary representation, causing errors when attempting to unmap PROT_NONE mappings, including implicit unmap on exit. Typical error: swap_info_get: Bad swap file entry 40000000007a9879 BUG: Bad page map in process a.out pte:3d4c3cc0 pmd:3e521401 Cc: stable@vger.kernel.org Signed-off-by:
Stefan O'Rear <sorear2@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Palmer Dabbelt <palmer@sifive.com> Signed-off-by:
-
Bob Tracy authored
commit 842fc0f5 upstream. Cc: stable@vger.kernel.org # v4.18+ Signed-off-by:
Bob Tracy <rct@frus.com> Signed-off-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Russell King authored
commit 0ce23d6d upstream. hdmi-codec oopses the kernel when it is unbound from a successfully bound audio subsystem, and is then rebound: Unable to handle kernel NULL pointer dereference at virtual address 0000001c pgd = ee3f0000 [0000001c] *pgd=3cc59831 Internal error: Oops: 817 [#1] PREEMPT ARM Modules linked in: ext2 snd_soc_spdif_tx vmeta dove_thermal snd_soc_kirkwood ofpart marvell_cesa m25p80 orion_wdt mtd spi_nor des_generic gpio_ir_recv snd_soc_kirkwood_spdif bmm_dmabuf auth_rpcgss nfsd autofs4 etnaviv thermal_sys hwmon gpu_sched tda9950 CPU: 0 PID: 1005 Comm: bash Not tainted 4.20.0+ #1762 Hardware name: Marvell Dove (Cubox) PC is at hdmi_dai_probe+0x68/0x80 LR is at find_held_lock+0x20/0x94 pc : [<c04c7de0>] lr : [<c0063bf4>] psr: 600f0013 sp : ee15bd28 ip : eebd8b1c fp : c093b488 r10: ee048000 r9 : eebdab18 r8 : ee048600 r7 : 00000001 r6 : 00000000 r5 : 00000000 r4 : ee82c100 r3 : 00000006 r2 : 00000001 r1 : c067e38c r0 : ee82c100 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none[ 297.318599] Control: 10c5387d Table: 2e3f0019 DAC: 00000051 Process bash (pid: 1005, stack limit = 0xee15a248) ... [<c04c7de0>] (hdmi_dai_probe) from [<c04b7060>] (soc_probe_dai.part.9+0x34/0x70) [<c04b7060>] (soc_probe_dai.part.9) from [<c04b81a8>] (snd_soc_instantiate_card+0x734/0xc9c) [<c04b81a8>] (snd_soc_instantiate_card) from [<c04b8b6c>] (snd_soc_add_component+0x29c/0x378) [<c04b8b6c>] (snd_soc_add_component) from [<c04b8c8c>] (snd_soc_register_component+0x44/0x54) [<c04b8c8c>] (snd_soc_register_component) from [<c04c64b4>] (devm_snd_soc_register_component+0x48/0x84) [<c04c64b4>] (devm_snd_soc_register_component) from [<c04c7be8>] (hdmi_codec_probe+0x150/0x260) [<c04c7be8>] (hdmi_codec_probe) from [<c0373124>] (platform_drv_probe+0x48/0x98) This happens because hdmi_dai_probe() attempts to access the HDMI codec private data, but this has not been assigned by hdmi_dai_probe() before it calls devm_snd_soc_register_component(). Move the call to dev_set_drvdata() before devm_snd_soc_register_component() to avoid this oops. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Manuel Reinhardt authored
commit 2bc16b9f upstream. The commit a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") introduced an error in the handling of quirks for implicit feedback endpoints. This commit fixes this. If a quirk successfully sets up an implicit feedback endpoint, usb-audio no longer tries to find the implicit fb endpoint itself. Fixes: a60945fd ("ALSA: usb-audio: move implicit fb quirks to separate function") Signed-off-by:
Manuel Reinhardt <manuel.rhdt@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Jurica Vukadin authored
commit 4cd3016c upstream. This enables mute LED support and fixes switching jacks when the laptop is docked. Signed-off-by:
Jurica Vukadin <jurica.vukadin@rt-rk.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jiri Olsa authored
commit 81ec3f3c upstream. Vince (and later on Ravi) reported crashes in the BTS code during fuzzing with the following backtrace: general protection fault: 0000 [#1] SMP PTI ... RIP: 0010:perf_prepare_sample+0x8f/0x510 ... Call Trace: <IRQ> ? intel_pmu_drain_bts_buffer+0x194/0x230 intel_pmu_drain_bts_buffer+0x160/0x230 ? tick_nohz_irq_exit+0x31/0x40 ? smp_call_function_single_interrupt+0x48/0xe0 ? call_function_single_interrupt+0xf/0x20 ? call_function_single_interrupt+0xa/0x20 ? x86_schedule_events+0x1a0/0x2f0 ? x86_pmu_commit_txn+0xb4/0x100 ? find_busiest_group+0x47/0x5d0 ? perf_event_set_state.part.42+0x12/0x50 ? perf_mux_hrtimer_restart+0x40/0xb0 intel_pmu_disable_event+0xae/0x100 ? intel_pmu_disable_event+0xae/0x100 x86_pmu_stop+0x7a/0xb0 x86_pmu_del+0x57/0x120 event_sched_out.isra.101+0x83/0x180 group_sched_out.part.103+0x57/0xe0 ctx_sched_out+0x188/0x240 ctx_resched+0xa8/0xd0 __perf_event_enable+0x193/0x1e0 event_function+0x8e/0xc0 remote_function+0x41/0x50 flush_smp_call_function_queue+0x68/0x100 generic_smp_call_function_single_interrupt+0x13/0x30 smp_call_function_single_interrupt+0x3e/0xe0 call_function_single_interrupt+0xf/0x20 </IRQ> The reason is that while event init code does several checks for BTS events and prevents several unwanted config bits for BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows to create BTS event without those checks being done. Following sequence will cause the crash: If we create an 'almost' BTS event with precise_ip and callchains, and it into a BTS event it will crash the perf_prepare_sample() function because precise_ip events are expected to come in with callchain data initialized, but that's not the case for intel_pmu_drain_bts_buffer() caller. Adding a check_period callback to be called before the period is changed via PERF_EVENT_IOC_PERIOD. It will deny the change if the event would become BTS. Plus adding also the limit_period check as well. Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20190204123532.GA4794@kravaSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Ingo Molnar authored
commit 528871b4 upstream. The following commit: 9dff0aa9 ("perf/core: Don't WARN() for impossible ring-buffer sizes") results in perf recording failures with larger mmap areas: root@skl:/tmp# perf record -g -a failed to mmap with 12 (Cannot allocate memory) The root cause is that the following condition is buggy: if (order_base_2(size) >= MAX_ORDER) goto fail; The problem is that @size is in bytes and MAX_ORDER is in pages, so the right test is: if (order_base_2(size) >= PAGE_SHIFT+MAX_ORDER) goto fail; Fix it. Reported-by:
"Jin, Yao" <yao.jin@linux.intel.com> Bisected-by:
Borislav Petkov <bp@alien8.de> Analyzed-by:
-
Tony Lindgren authored
commit d0243693 upstream. Commit 83a86fbb ("irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE") started warning about incorrect dts usage for irqs. ARM GIC only supports active-high interrupts for SPI (Shared Peripheral Interrupts), and the Palmas PMIC by default is active-low. Palmas PMIC allows changing the interrupt polarity using register PALMAS_POLARITY_CTRL_INT_POLARITY, but configuring sys_nirq1 with a pull-down and setting PALMAS_POLARITY_CTRL_INT_POLARITY made the Palmas RTC interrupts stop working. This can be easily tested with kernel tools rtctest.c. Turns out the SoC inverts the sys_nirq pins for GIC as they do not go through a peripheral device but go directly to the MPUSS wakeupgen. I've verified this by muxing the interrupt line temporarily to gpio_wk16 instead of sys_nirq1. with a gpio, the interrupt works fine both active-low and active-high with the SoC internal pull configured and palmas polarity configured. But as sys_nirq1, the interrupt only works when configured ACTIVE_LOW for palmas, and ACTIVE_HIGH for GIC. Note that there was a similar issue earlier with tegra114 and palmas interrupt polarity that got fixed by commit df545d1c ("mfd: palmas: Provide irq flags through DT/platform data"). However, the difference between omap5 and tegra114 is that tegra inverts the palmas interrupt twice, once when entering tegra PMC, and again when exiting tegra PMC to GIC. Let's fix the issue by adding a custom wakeupgen_irq_set_type() for wakeupgen and invert any interrupts with wrong polarity. Let's also warn about any non-sysnirq pins using wrong polarity. Note that we also need to update the dts for the level as IRQ_TYPE_NONE never has irq_set_type() called, and let's add some comments and use proper pin nameing to avoid more confusion later on. Cc: Belisko Marek <marek.belisko@gmail.com> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: "Dr. H. Nikolaus Schaller" <hns@goldelico.com> Cc: Jon Hunter <jonathanh@nvidia.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Nishanth Menon <nm@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Thierry Reding <treding@nvidia.com> Cc: stable@vger.kernel.org # v4.17+ Reported-by:
Belisko Marek <marek.belisko@gmail.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Mauro Ciancio authored
commit 7ad222b3 upstream. This adds ELAN0617 to the ACPI table to support Elan touchpad found in Lenovo V330-15ISK. Signed-off-by:
Mauro Ciancio <mauro@acadeu.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit f420c54e upstream. This reverts commit 7db54c89 as it breaks Acer Aspire V-371 and other devices. According to Elan: "Acer Aspire F5-573G is MS Precision touchpad which should use hid multitouch driver. ELAN0501 should not be added in elan_i2c." Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202503 Cc: stable@vger.kernel.org Signed-off-by:
-
Anson Huang authored
commit 1a5287a3 upstream. During noirq suspend/resume phase, GPIO irq could arrive and its registers like IMR will be changed by irq handle process, to make the GPIO registers exactly when it is powered ON after resume, move the GPIO noirq suspend/resume callback to syscore suspend/resume phase, local irq is disabled at this phase so GPIO registers are atomic. Fixes: c19fdaee ("gpio: mxc: add power management support") Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Martin Hundebøll <martin@geanix.com> Cc: <stable@vger.kernel.org> # 4.19.x+ Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pavel Shilovsky authored
[ Upstream commit 0fd1d37b ] If we don't receive a response we can't assume that the server granted one credit. Assume zero credits in such cases. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
David Rientjes authored
[ Upstream commit 3f14a89d ] By code inspection, it was found that multiple calls to KVM_SEV_INIT could deplete asid bits and overwrite kvm_sev_info's regions_list. Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this should likely be fixed anyway. This code is serialized by kvm->lock. Fixes: 1654efcb ("KVM: SVM: Add KVM_SEV_INIT command") Reported-by:
Cfir Cohen <cfir@google.com> Signed-off-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 92a8109e ] The code tries to allocate a contiguous buffer with a size supplied by the server (maxBuf). This could fail if memory is fragmented since it results in high order allocations for commonly used server implementations. It is also wasteful since there are probably few locks in the usual case. Limit the buffer to be no larger than a page to avoid memory allocation failures due to fragmentation. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
Ilia Mirkin authored
[ Upstream commit a5176a4c ] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108980Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit 11878006 ] When a fan is controlled via linear fallback without cstate, we shouldn't stop polling. Otherwise it won't be adjusted again and keeps running at an initial crazy pace. Fixes: 800efb4c ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios") Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447Reported-by:
Thomas Blume <thomas.blume@suse.com> Signed-off-by:
Martin Peres <martin.peres@free.fr> Signed-off-by:
-
Nicholas Mc Guire authored
[ Upstream commit df209c43 ] devm_kzalloc(), devm_kstrdup() and devm_kasprintf() all can fail internal allocation and return NULL. Using any of the assigned objects without checking is not safe. As this is early in the boot phase and these allocations really should not fail, any failure here is probably an indication of a more serious issue so it makes little sense to try and rollback the previous allocated resources or try to continue; but rather the probe function is simply exited with -ENOMEM. Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Fixes: 684284b6 ("ARM: integrator: add MMCI device to IM-PD1") Signed-off-by:
-
Linus Walleij authored
[ Upstream commit b5f03484 ] These two lines are active high, not active low. The bug was found when we changed the kernel to respect the polarity defined in the device tree. Fixes: 1b90e06b ("ARM: kirkwood: Use devicetree to define DNS-32[05] fan") Cc: Jamie Lentin <jm@lentin.co.uk> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Gregory Clement <gregory.clement@bootlin.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Julien D'Ascenzio <jdascenzio@posteo.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Jamie Lentin <jm@lentin.co.uk> Reported-by:
Julien D'Ascenzio <jdascenzio@posteo.net> Tested-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit c25748ac ] To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit bd540ebe ] Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Invalid supply voltage(s) AVDD: -22, DVDD: -22 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 7fca69d4 ] To avoid the following error: asoc-simple-card sound: ASoC: Failed to create card debugfs directory Which is because the card name contains '/' character, which can not be used in file or directory names. Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 706edaa8 ] Add the board level fixed regulators for 3.3V and 1.8V which is used to power - among other things - the tlv320aic3106 codec. Apart from removing the following warning during boot: tlv320aic3x-codec 0-0018: Too high supply voltage(s) AVDD: 5000000, DVDD: 5000000 With the correct voltages the driver can select correct OCMV value to reduce pop noise. Signed-off-by:
-
Jim Qu authored
[ Upstream commit 0c6c8125 ] effect asics: VEGA10 and VEGA12 Signed-off-by:
Jim Qu <Jim.Qu@amd.com> Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Keith Busch authored
[ Upstream commit 3da584f5 ] We need to preserve the leading zeros in the vid and ssvid when generating a unique NQN. Truncating these may lead to naming collisions. Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit c7055fd1 ] When nvme_init_identify() fails the ANA log buffer is deallocated but _not_ set to NULL. This can cause double free oops when this controller is deleted without ever being reconnected. Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
Hongbo Yao authored
[ Upstream commit dcca1662 ] There is an out of bounds array access in nvme_cqe_peding(). When enable irq_thread for nvme interrupt, there is racing between the nvmeq->cq_head updating and reading. nvmeq->cq_head is updated in nvme_update_cq_head(), if nvmeq->cq_head equals nvmeq->q_depth and before its value set to zero, nvme_cqe_pending() uses its value as an array index, the index will be out of bounds. Signed-off-by:
Hongbo Yao <yaohongbo@huawei.com> [hch: slight coding style update] Signed-off-by:
-
Liviu Dudau authored
[ Upstream commit cc667f6d ] When using HMB the PCIe host driver allocates host_mem_desc_bufs using dma_alloc_attrs() but frees them using dma_free_coherent(). Use the correct dma_free_attrs() function to free the buffers. Signed-off-by:
Liviu Dudau <liviu@dudau.co.uk> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 7923e09c ] The H and V syncs of the DP output are always set to active high. This patch fixes the syncs by configuring them according to the videomode. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 51b9e62e ] The current driver accepts any videomode with pclk < 154MHz. This is not correct, as with 1 lane and/or 1.62Mbps speed not all videomodes can be supported. Add code to reject modes that require more bandwidth that is available. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 9a63bd6f ] Initially DP0_SRCCTRL is set to a static value which includes DP0_SRCCTRL_LANES_2 and DP0_SRCCTRL_BW27, even when only 1 lane of 1.62Gbps speed is used. DP1_SRCCTRL is configured to a magic number. This patch changes the configuration as follows: Configure DP0_SRCCTRL by using tc_srcctrl() which provides the correct value. DP1_SRCCTRL needs two bits to be set to the same value as DP0_SRCCTRL: SSCG and BW27. All other bits can be zero. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 4d9d54a7 ] PHY_2LANE bit is always set in DP_PHY_CTRL, breaking 1 lane use. Set PHY_2LANE only when 2 lanes are used. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit adf41098 ] DP1_SRCCTRL register and PHY_2LANE field did not have matching defines. Add these. Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 4842379c ] tc358767 driver does not set DRM bus_flags, even if it does configures the polarity settings into its registers. This means that the DPI source can't configure the polarities correctly. Add sync flags accordingly. Signed-off-by:
-
Sudeep Holla authored
[ Upstream commit 2f661962 ] cpuinfo_cur_freq gets current CPU frequency as detected by hardware while scaling_cur_freq last known CPU frequency. Some platforms may not allow checking the CPU frequency of an offline CPU or the associated resources may have been released via cpufreq_exit when the CPU gets offlined, in which case the policy would have been invalidated already. If we attempt to get current frequency from the hardware, it may result in hang or crash. For example on Juno, I see: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000188 [0000000000000188] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 5 PID: 4202 Comm: cat Not tainted 4.20.0-08251-ga0f2c0318a15-dirty #87 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform pstate: 40000005 (nZcv daif -PAN -UAO) pc : scmi_cpufreq_get_rate+0x34/0xb0 lr : scmi_cpufreq_get_rate+0x34/0xb0 Call trace: scmi_cpufreq_get_rate+0x34/0xb0 __cpufreq_get+0x34/0xc0 show_cpuinfo_cur_freq+0x24/0x78 show+0x40/0x60 sysfs_kf_seq_show+0xc0/0x148 kernfs_seq_show+0x44/0x50 seq_read+0xd4/0x480 kernfs_fop_read+0x15c/0x208 __vfs_read+0x60/0x188 vfs_read+0x94/0x150 ksys_read+0x6c/0xd8 __arm64_sys_read+0x24/0x30 el0_svc_common+0x78/0x100 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc ---[ end trace 3d1024e58f77f6b2 ]--- So fix the issue by checking if the policy is invalid early in __cpufreq_get before attempting to get the current frequency. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
David Abdurachmanov authored
[ Upstream commit 775800b0 ] Fix compilation error. Signed-off-by:
David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by:
-
Aurelien Jarno authored
[ Upstream commit d0df00e3 ] The BPF library is not built on 64-bit RISC-V, as the BPF feature is not detected. Looking more in details, feature/test-bpf.c fails to build with the following error: | In file included from /tmp/linux-4.19.12/tools/include/uapi/asm/bitsperlong.h:17, | from /tmp/linux-4.19.12/tools/include/uapi/asm-generic/unistd.h:2, | from /usr/include/riscv64-linux-gnu/asm/unistd.h:1, | from test-bpf.c:2: | /tmp/linux-4.19.12/tools/include/asm-generic/bitsperlong.h:14:2: error: #error Inconsistent word size. Check asm/bitsperlong.h | #error Inconsistent word size. Check asm/bitsperlong.h | ^~~~~ The UAPI from the tools directory is missing RISC-V support, therefore bitsperlong.h from asm-generic is used, defaulting to 32 bits. Fix that by adding tools/arch/riscv/include/uapi/asm/bitsperlong.h as a copy of arch/riscv/include/uapi/asm/bitsperlong.h and by updating tools/include/uapi/asm/bitsperlong.h. Signed-off-by:
Aurelien Jarno <aurelien@aurel32.net> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 03fa4838 ] Some kernels, like 4.19.13-300.fc29.x86_64 in fedora 29, fail with the existing probe definition asking for the contents of result->name, working when we ask for the 'filename' variable instead, so add a fallback to that. Now those tests are back working on fedora 29 systems with that kernel: # perf test vfs_getname 65: Use vfs_getname probe to get syscall args filenames : Ok 66: Add vfs_getname probe to get syscall args filenames : Ok 67: Check open filename arg using perf trace + vfs_getname: Ok # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-klt3n0i58dfqttveti09q3fi@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jin Yao authored
[ Upstream commit a3366db0 ] By calculating the removed loops, we can get the iteration count. But the iteration count could be reported incorrectly, reporting impossibly high counts. That's because previous code uses the number of removed LBR entries for the iteration count. That's not good. Fix this by increasing the iteration count when a loop is detected. When matching the chain, the iteration count would be added up, finally we need to compute the average value when printing out. For example, $ perf report --branch-history --stdio --no-children Before: ---f2 +0 | |--33.62%--f1 +9 (cycles:1) | f1 +0 | main +22 (cycles:1) | main +17 | main +38 (cycles:1) | main +27 | f1 +26 (cycles:1) | f1 +24 | f2 +27 (cycles:7) | f2 +0 | f1 +19 (cycles:1) | f1 +14 | f2 +27 (cycles:11) | f2 +0 | f1 +9 (cycles:1 iter:2968 avg_cycles:3) | f1 +0 | main +22 (cycles:1 iter:2968 avg_cycles:3) | main +17 | main +38 (cycles:1 iter:2968 avg_cycles:3) 2968 is an impossible high iteration count and avg_cycles is too small. After: ---f2 +0 | |--33.62%--f1 +9 (cycles:1) | f1 +0 | main +22 (cycles:1) | main +17 | main +38 (cycles:1) | main +27 | f1 +26 (cycles:1) | f1 +24 | f2 +27 (cycles:7) | f2 +0 | f1 +19 (cycles:1) | f1 +14 | f2 +27 (cycles:11) | f2 +0 | f1 +9 (cycles:1 iter:1 avg_cycles:23) | f1 +0 | main +22 (cycles:1 iter:1 avg_cycles:23) | main +17 | main +38 (cycles:1 iter:1 avg_cycles:23) avg_cycles:23 is the average cycles of this iteration. Fixes: c4ee0625 ("perf report: Calculate the average cycles of iterations") Signed-off-by:
-
Chao Fan authored
[ Upstream commit b9ced18a ] The addresses of NUMA nodes are not printed correctly on i386-PAE which is misleading. Here is a debian9-32bit with PAE in a QEMU guest having more than 4G of memory: qemu-system-i386 \ -hda /var/lib/libvirt/images/debian32.qcow2 \ -m 5G \ -enable-kvm \ -smp 10 \ -numa node,mem=512M,nodeid=0,cpus=0 \ -numa node,mem=512M,nodeid=1,cpus=1 \ -numa node,mem=512M,nodeid=2,cpus=2 \ -numa node,mem=512M,nodeid=3,cpus=3 \ -numa node,mem=512M,nodeid=4,cpus=4 \ -numa node,mem=512M,nodeid=5,cpus=5 \ -numa node,mem=512M,nodeid=6,cpus=6 \ -numa node,mem=512M,nodeid=7,cpus=7 \ -numa node,mem=512M,nodeid=8,cpus=8 \ -numa node,mem=512M,nodeid=9,cpus=9 \ -serial stdio Because of the wrong value type, it prints as below: [ 0.021049] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.021740] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.022425] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.023092] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.023764] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.024431] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.025104] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.025791] ACPI: SRAT Memory (0x0 length 0x20000000) in proximity domain 6 enabled [ 0.026412] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 7 enabled [ 0.027118] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 8 enabled [ 0.027802] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 9 enabled The upper half of the start address of the NUMA domains between 6 and 9 inclusive was cut, so the printed values are incorrect. Fix the value type, to get the correct values in the log as follows: [ 0.023698] ACPI: SRAT Memory (0x0 length 0xa0000) in proximity domain 0 enabled [ 0.024325] ACPI: SRAT Memory (0x100000 length 0x1ff00000) in proximity domain 0 enabled [ 0.024981] ACPI: SRAT Memory (0x20000000 length 0x20000000) in proximity domain 1 enabled [ 0.025659] ACPI: SRAT Memory (0x40000000 length 0x20000000) in proximity domain 2 enabled [ 0.026317] ACPI: SRAT Memory (0x60000000 length 0x20000000) in proximity domain 3 enabled [ 0.026980] ACPI: SRAT Memory (0x80000000 length 0x20000000) in proximity domain 4 enabled [ 0.027635] ACPI: SRAT Memory (0xa0000000 length 0x20000000) in proximity domain 5 enabled [ 0.028311] ACPI: SRAT Memory (0x100000000 length 0x20000000) in proximity domain 6 enabled [ 0.028985] ACPI: SRAT Memory (0x120000000 length 0x20000000) in proximity domain 7 enabled [ 0.029667] ACPI: SRAT Memory (0x140000000 length 0x20000000) in proximity domain 8 enabled [ 0.030334] ACPI: SRAT Memory (0x160000000 length 0x20000000) in proximity domain 9 enabled Signed-off-by:
Chao Fan <fanc.fnst@cn.fujitsu.com> [ rjw: Subject & changelog ] Signed-off-by:
-
