- 04 Apr, 2013 21 commits
-
-
Peter De Schrijver authored
The UART driver enables the console uart clock, so we don't need to do that anymore in this file. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
Add references to tegra_car clocks for the basic device nodes. Also remove the clock-frequency property of the serial node as the UART driver can now use the clock framework to obtain the frequency. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
Implement clocks for Tegra114. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
The device tree binding models Tegra114 CAR (Clock And Reset) as a single monolithic clock provider. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
Workaround a hardware bug in MSENC during clock enable. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
We will need some tegra peripheral clocks with the CLK_IGNORE_UNUSED flag, most notably mselect, which is a bridge between AXI and most peripherals. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
Tegra114 introduces new PLL types. This requires new clocktypes as well as some new fields in the pll structure. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
PLLC2 and PLLC3 on Tegra114 have separate phaselock and frequencylock bits. So switch to a lock mask to be able to test both at the same time. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
Some PLLs in Tegra114 don't use a power of 2 mapping for the post divider. Introduce a table based approach and switch PLLU to it. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
Tegra114 PLLC2 and PLLC3 don't have a lock enable bit. The lock bits are always functional. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
Not all PLLs in Tegra114 have a bypass bit. Adapt the common code to only use this bit when available. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
Refactor the PLL programming code to make it useable by the new PLL types introduced by Tegra114. The following changes were done: * Split programming the PLL into updating m,n,p and updating cpcon * Move locking from _update_pll_cpcon() to clk_pll_set_rate() * Introduce _get_pll_mnp() helper * Move check for identical m,n,p values to clk_pll_set_rate() * struct tegra_clk_pll_freq_table will always contain the values as defined by the hardware. * Simplify the arguments to clk_pll_wait_for_lock() * Split _tegra_clk_register_pll() Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Peter De Schrijver authored
tegra_boot_secondary() relies on some of the car ops. This means having an uninitialized tegra_cpu_car_ops will lead to an early boot panic. Providing a dummy struct avoids this and makes adding Tegra114 clock support in a bisectable way a lot easier. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Stephen Warren authored
The Tegra clock driver is initialized during the ARM machine descriptor's .init_irq() hook. It can't be initialized earlier, since dynamic memory usage is required. It can't be initialized later, since the .init_timer() hook needs the clocks initialized. However, at this time, udelay() doesn't work. The Tegra clock initialization table may enable some PLLs. Enabling a PLL may require usage of udelay(). Hence, this can't happen right when the clock driver is initialized. To solve this, separate the clock driver initialization from the clock table processing, so they can execute at separate times. Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Prashant Gaikwad authored
Correct IDs for cdev1 and cdev2 are 94 and 93 respectively. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> [swarren: split into separate driver and device-tree patches] Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Thierry Reding authored
By default these clocks are children of pll_m, but in downstream kernels they are reparented to pll_c. While at it, decrease their frequencies to 300 MHz because the defaults aren't in the specified range. gr2d can reportedly run at much higher frequencies, but 300 MHz works and is a more conservative default. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Thierry Reding authored
The tegra_periph_reset_assert() and tegra_periph_reset_deassert() functions can be used by drivers to reset peripherals. In order to allow such drivers to be built as modules, export the functions. Note that this restores the status quo as the functions were exported before the move to the drivers/clk tree. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Yen Lin authored
The parameter name should be "gate", not "periph". This worked, however, because it happens that everywhere periph_clk_to_bit is called, "gate" was in the local scope. Signed-off-by: Yen Lin <yelin@nvidia.com> Signed-off-by: Andrew Chew <achew@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Prashant Gaikwad <pgaikwad@nvidia.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Stephen Warren authored
-
Stephen Warren authored
-
- 03 Apr, 2013 7 commits
-
-
Joseph Lo authored
After the patch series for system suspending support, tegra_idle_lp2_last() no longer uses its parameters cpu_on_time or cpu_off_time, so remove them. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Joseph Lo authored
Adding suspend to RAM support for Tegra platform. There are three suspend mode for Tegra. The difference were below. * LP2: CPU voltage off * LP1: CPU voltage off, DRAM in self-refresh * LP0: CPU + Core voltage off, DRAM in self-refresh After this patch, the LP2 suspend mode will be supported. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Joseph Lo authored
The PMC mostly controls the entry and exit of the system from different sleep modes. Different platform or system may have different configurations. The power management configurations of PMC is represented as some properties. The system needs to define the properties when the system supports deep sleep mode (i.e. suspend). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Joseph Lo authored
Add the wake up handling for legacy irq controller, and using IRQCHIP_MASK_ON_SUSPEND for wake irq handling. Based on the work by: Varun Wadekar <vwadekar@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Joseph Lo authored
This patch add the gpio wakeup source handling for the Tegra platform. It was be done by enabling the irq for the gpio in the gpio controller and enabling the bank irq of the gpio in the Tegra legacy irq controller when the system going to suspend. Based on the work by: Varun Wadekar <vwadekar@nvidia.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Joseph Lo authored
The CPU power timer set up function was related to PMC register. Now moving it to PMC driver. And it also help to clean up the PM related code later. The timer was calculated based on the input clock of PMC. In this patch, we also get the clock from DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
Joseph Lo authored
Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
-
- 02 Apr, 2013 2 commits
-
-
Mike Turquette authored
Reentrancy into the clock framework is necessary for clock operations that result in nested calls to the clk api. A common example is a clock that is prepared via an i2c transaction, such as a clock inside of a discrete audio chip or a power management IC. The i2c subsystem itself will use the clk api resulting in a deadlock: clk_prepare(audio_clk) i2c_transfer(..) clk_prepare(i2c_controller_clk) The ability to reenter the clock framework prevents this deadlock. Other use cases exist such as allowing .set_rate callbacks to call clk_set_parent to achieve the best rate, or to save power in certain configurations. Yet another example is performing pinctrl operations from a clk_ops callback. Calls into the pinctrl subsystem may call clk_{un}prepare on an unrelated clock. Allowing for nested calls to reenter the clock framework enables both of these use cases. Reentrancy is implemented by two global pointers that track the owner currently holding a global lock. One pointer tracks the owner during sleepable, mutex-protected operations and the other one tracks the owner during non-interruptible, spinlock-protected operations. When the clk framework is entered we try to hold the global lock. If it is held we compare the current task against the current owner; a match implies a nested call and we reenter. If the values do not match then we block on the lock until it is released. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
-
Mike Turquette authored
Create locking helpers for the global mutex and global spinlock. The definitions of these helpers will be expanded upon in the next patch which introduces reentrancy into the locking scheme. Signed-off-by: Mike Turquette <mturquette@linaro.org> Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org> Cc: David Brown <davidb@codeaurora.org> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
-
- 27 Mar, 2013 6 commits
-
-
Michal Simek authored
Include zynq clk header where init function is declared. It removes this sparse warning: drivers/clk/clk-zynq.c:373:13: warning: symbol 'xilinx_zynq_clocks_init' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Emilio López authored
During the introduction of the Allwinner SoC platforms, sunxi was initially meant as a generic name for all the variants of the Allwinner SoC. It was ok at the time of the support of only the A10 and A13 that look pretty much the same; but it's beginning to be troublesome with the future addition of the Allwinner A31 (sun6i) that is quite different, and would introduce some weird logic, where sunxi would actually mean in some case sun4i and sun5i but without sun6i... Moreover, it makes the compatible strings naming scheme not consistent with other architectures, where usually for this kind of compability, we just use the oldest SoC name that has this IP, so let's do just this. Signed-off-by: Emilio López <emilio@elopez.com.ar> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Emilio López authored
This patch contains useful bits of information about the sunxi clocks that may help and/or be interesting for current and future developers. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Emilio López authored
This commit implements the base CPU clocks for sunxi devices. It has been tested using a slightly modified cpufreq driver from the linux-sunxi 3.0 tree. Additionally, document the new bindings introduced by this patch. Idling: / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 60000000 cpu 0 0 60000000 axi 0 0 60000000 ahb 0 0 60000000 apb0 0 0 30000000 dummy 0 0 0 After "yes >/dev/null &": / # cat /sys/kernel/debug/clk/clk_summary clock enable_cnt prepare_cnt rate --------------------------------------------------------------------- osc32k 0 0 32768 osc24M_fixed 0 0 24000000 osc24M 0 0 24000000 apb1_mux 0 0 24000000 apb1 0 0 24000000 pll1 0 0 1008000000 cpu 0 0 1008000000 axi 0 0 336000000 ahb 0 0 168000000 apb0 0 0 84000000 dummy 0 0 0 Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
Maxime Coquelin authored
In clk_reg_prcmu(), clk->hw.init field is assigned with a reference local to clk_reg_prcmu() function. This patch replaces references to clk->hw.init with calls to __clk_get_name when called after clock registration. This patch applies on top of v3.9-rc4. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: resolved trivial merge issues]
-
Fabio Estevam authored
Commit ce4f3313 (clk: add table lookup to mux) caused the following build error on imx_v4_v5_defconfig/imx_v6_v7_defconfig: arch/arm/mach-imx/clk-busy.c:172:11: error: 'struct clk_mux' has no member named 'width' Fix it by passing the 'mask' field. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: shortened $SUBJECT line]
-
- 26 Mar, 2013 1 commit
-
-
Prashant Gaikwad authored
Not all clocks are required to be decomposed into basic clock types but at the same time want to use the functionality provided by these basic clock types instead of duplicating. For example, Tegra SoC has ~100 clocks which can be decomposed into Mux -> Div -> Gate clock types making the clock count to ~300. Also, parent change operation can not be performed on gate clock which forces to use mux clock in driver if want to change the parent. Instead aggregate the basic clock types functionality into one clock and just use this clock for all operations. This clock type re-uses the functionality of basic clock types and not limited to basic clock types but any hardware-specific implementation. Signed-off-by: Prashant Gaikwad <pgaikwad@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
-
- 23 Mar, 2013 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull SCSI target fixes from Nicholas Bellinger: "These are mostly minor fixes this time around. The iscsi-target CHAP big-endian bugfix and bump FD_MAX_SECTORS=2048 default patch to allow 1MB sized I/Os for FILEIO backends on >= v3.5 code are both CC'ed to stable. Also, there is a persistent reservations regression that has recently been reported for >= v3.8.x code, that is currently being tracked down for v3.9." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/pscsi: Reject cross page boundary case in pscsi_map_sg target/file: Bump FD_MAX_SECTORS to 2048 to handle 1M sized I/Os tcm_vhost: Flush vhost_work in vhost_scsi_flush() tcm_vhost: Add missed lock in vhost_scsi_clear_endpoint() target: fix possible memory leak in core_tpg_register() target/iscsi: Fix mutual CHAP auth on big-endian arches target_core_sbc: use noop for SYNCHRONIZE_CACHE
-
git://neil.brown.name/mdLinus Torvalds authored
Pull md fixes from NeilBrown: "A few bugfixes for md - recent regressions in raid5 - recent regressions in dmraid - a few instances of CONFIG_MULTICORE_RAID456 linger Several tagged for -stable" * tag 'md-3.9-fixes' of git://neil.brown.name/md: md: remove CONFIG_MULTICORE_RAID456 entirely md/raid5: ensure sync and DISCARD don't happen at the same time. MD: Prevent sysfs operations on uninitialized kobjects MD RAID5: Avoid accessing gendisk or queue structs when not available md/raid5: schedule_construction should abort if nothing to do.
-