- 31 Jan, 2017 40 commits
-
-
Jean-Christophe Trotin authored
This patch creates 4 static debugfs entries to dump: - the device-related information ("st-hva/device") - the list of registered encoders ("st-hva/encoders") - the current values of the hva registers ("st-hva/regs") - the information about the last closed instance ("st-hva/last") It also creates dynamically a debugfs entry for each opened instance, ("st-hva/<instance identifier>") to dump: - the information about the frame (format, resolution) - the information about the stream (format, profile, level, resolution) - the control parameters (bitrate mode, framerate, GOP size...) - the potential (system, encoding...) errors - the performance information about the encoding (HW processing duration, average bitrate, average framerate...) Each time a running instance is closed, its context (including the debug information) is saved to feed, on demand, the last closed instance debugfs entry. Signed-off-by:Yannick Fertre <yannick.fertre@st.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Jean-Christophe Trotin <jean-christophe.trotin@st.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Jean-Christophe Trotin authored
This patch adds a short summary about the encoding operation at each instance closing, for debug purpose (through dev_dbg()): - information about the frame (format, resolution) - information about the stream (format, profile, level, resolution) - number of encoded frames - potential (system, encoding...) errors Signed-off-by:
-
Nicholas Mc Guire authored
ulseep_range() uses hrtimers and provides no advantage over msleep() for larger delays. Fix up the 25ms delays here to use msleep() and reduce the load on the hrtimer subsystem. Link: http://lkml.org/lkml/2017/1/11/377Reviwed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by:
-
Laurent Pinchart authored
The gpiod API checks for NULL descriptors, there's no need to duplicate the check in the driver. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Despite checkpatch comments, it seems that ARM doesn't like to use constified structs. As reported by kernel build robot: In file included from drivers/media/platform/coda/imx-vdoa.c:22:0: drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_init': >> include/linux/device.h:1461:20: warning: passing argument 1 of '__platform_driver_register' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] return __register(&(__driver) , ##__VA_ARGS__); \ ^ include/linux/platform_device.h:198:29: note: in definition of macro 'platform_driver_register' __platform_driver_register(drv, THIS_MODULE) ^~~ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ >> drivers/media/platform/coda/imx-vdoa.c:333:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(vdoa_driver); ^~~~~~~~~~~~~~~~~~~~~~ include/linux/platform_device.h:199:12: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *' extern int __platform_driver_register(struct platform_driver *, ^~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/media/platform/coda/imx-vdoa.c:18:0: drivers/media/platform/coda/imx-vdoa.c: In function 'vdoa_driver_exit': >> include/linux/device.h:1466:15: warning: passing argument 1 of 'platform_driver_unregister' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] __unregister(&(__driver) , ##__VA_ARGS__); \ ^ include/linux/platform_device.h:228:2: note: in expansion of macro 'module_driver' module_driver(__platform_driver, platform_driver_register, \ ^~~~~~~~~~~~~ >> drivers/media/platform/coda/imx-vdoa.c:333:1: note: in expansion of macro 'module_platform_driver' module_platform_driver(vdoa_driver); ^~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/media/platform/coda/imx-vdoa.c:22:0: include/linux/platform_device.h:201:13: note: expected 'struct platform_driver *' but argument is of type 'const struct platform_driver *' extern void platform_driver_unregister(struct platform_driver *); ^~~~~~~~~~~~~~~~~~~~~~~~~~ So, let's just remove it. This reverts commit 126f52b0. Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Shailendra Verma authored
Both functions initialize the file handle with v4l2_fh_init() and thus need to call clean up with v4l2_fh_exit() as appropriate. Fix it. Signed-off-by:
Shailendra Verma <shailendra.v@samsung.com> Signed-off-by:
-
Shailendra Verma authored
Both functions initialize the file handle with v4l2_fh_init() and thus need to call clean up with v4l2_fh_exit() as appropriate. Fix it. Signed-off-by:
-
Jaejoong Kim authored
The device driver should keep going even if debugfs initialization fails. So, change the return type to void. Signed-off-by:
Jaejoong Kim <climbbb.kim@gmail.com> Reviewed-by:
-
Guennadi Liakhovetski authored
Don't mix up UVC_BUF_STATE_* and VB2_BUF_STATE_* codes. Fixes: 6998b6fb ("[media] uvcvideo: Use videobuf2-vmalloc") Cc: stable@vger.kernel.org Signed-off-by:
Guennadi Liakhovetski <guennadi.liakhovetski@intel.com> Signed-off-by:
-
Guennadi Liakhovetski authored
Remove a superfluous assignment to a local variable at the end of a function. Signed-off-by:
-
Guennadi Liakhovetski authored
Add an inline function to obtain a struct uvc_buffer pointer from a struct vb2_v4l2_buffer one. Signed-off-by:
-
Antti Palosaari authored
Use formulas for cnr estimates and get rid of old lut-based estimate. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Chip uses so called 8-bit i2c addresses, but on bus there is of course correct 7-bit addresses with rw bit as lsb - verified with oscilloscope. Lets still use correct addresses in driver. Signed-off-by:
-
Antti Palosaari authored
Driver supports 2 different device versions, AX and BX. Use device IDs to pass chip version information to driver. Signed-off-by:
-
Antti Palosaari authored
it913x tuner driver is changed to platform model so we need bind it using platform_device_register_data(). Also remove hacks from I2C adapter where fake tuner driver address (addr >> 1) were used as those are no longer needed. Signed-off-by:
-
Antti Palosaari authored
That tuner is integrated to demodulator and communicates via demodulators address space. We cannot register both demodulator and tuner having same address to same I2C bus, so better to change it platform driver in order to implement I2C adapter correctly. Signed-off-by:
-
Antti Palosaari authored
IT9130 series contains integrated tuner driver, which uses that demodulator address space. Return regmap in order to allow it913x driver communication. Signed-off-by:
-
Antti Palosaari authored
Fix coding style and other small issues. Signed-off-by:
-
Antti Palosaari authored
Replace Booth's binary division algo with 64-bit multiply and division. Fix related IF calculations. Signed-off-by:
-
Antti Palosaari authored
Use regmap to cover I2C register operations. Signed-off-by:
-
Antti Palosaari authored
Read eeprom content to chip state and read values there when needed. Also debug dump eeprom content. Signed-off-by:
-
Antti Palosaari authored
Implement DVBv5 UCB. Only uncorrected blocks are currently counted. Signed-off-by:
-
Antti Palosaari authored
Implement DVBv5 BER. Signed-off-by:
-
Pavel Machek authored
Mark and Sakari as maintainers for Nokia N900 camera pieces. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Pavel Machek authored
Add driver for et8ek8 sensor, found in Nokia N900 main camera. Can be used for taking photos in 2.5MP resolution with fcam-dev. Signed-off-by:
Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by:
-
Pavel Machek authored
Add device tree binding documentation for toshiba et8ek8 sensor. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Bhumika Goyal authored
v4l2_subdev_{core/pad/video}_ops structures are stored in the fields of the v4l2_subdev_ops structure which are of type const. Also, v4l2_subdev_ops structure is passed to a function having its argument of type const. As these structures are never modified, so declare them as const. Done using Coccinelle:(one of the scripts used) @r1 disable optional_qualifier @ identifier i; position p; @@ static struct v4l2_subdev_ops i@p = {...}; @ok1@ identifier r1.i; position p; expression e1; @@ v4l2_subdev_init(e1,&i@p) @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct v4l2_subdev_ops i; File size before: text data bss dec hex filename 16830 1064 0 17894 45e6 platform/exynos4-is/fimc-capture.o 7787 704 20 8511 213f platform/exynos4-is/mipi-csis.o File size after: text data bss dec hex filename 17022 880 0 17902 45ee platform/exynos4-is/fimc-capture.o 8299 192 20 8511 213f platform/exynos4-is/mipi-csis.o Signed-off-by:Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Arvind Yadav authored
Free memory mapping, if fimc_is_probe is not successful. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Javier Martinez Canillas authored
Commit a006c04e ("[media] exynos-gsc: Fixup clock management at ->remove()") changed the driver's .remove function logic to fist do a pm_runtime_get_sync() to make sure the device is powered before attempting to gate the gsc clock. But the commit also removed a pm_runtime_disable() call that leads to an unbalanced pm_runtime_enable() error if the driver is removed and re-probed: exynos-gsc 13e00000.video-scaler: Unbalanced pm_runtime_enable! exynos-gsc 13e10000.video-scaler: Unbalanced pm_runtime_enable! Fixes: a006c04e ("[media] exynos-gsc: Fixup clock management at ->remove()") Signed-off-by:
Javier Martinez Canillas <javier@osg.samsung.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Shailendra Verma authored
The file handle is not yet added in the vfd list. So no need to call v4l2_fh_del(&ctx->fh) if it fails to create controls. Signed-off-by:
-
Shailendra Verma authored
The file handle is not yet added in the vfd list. So no need to call v4l2_fh_del(&ctx->fh) if it fails to create controls. Signed-off-by:
-
Antti Palosaari authored
Setting GPIOs during probe causes null pointer deference when GPIOLIB was not selected by Kconfig. Initialize driver private field before calling set gpios. It is regressing bug since 4.9. Fixes: 07fdf7d9 ("[media] cxd2820r: add I2C driver bindings") Reported-by:
Chris Rankin <rankincj@gmail.com> Tested-by:
Håkan Lennestål <hakan.lennestal@gmail.com> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by:
-
Michael Tretter authored
The VDOA is able to transform the NV12 custom macroblock tiled format of the CODA to YUYV format. If and only if the VDOA is available, the driver can also provide YUYV support. While the driver is configured to produce YUYV output, the CODA must be configured to produce NV12 macroblock tiled frames and the VDOA must transform the intermediate result into the final YUYV output. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Michael Tretter authored
If the CODA driver is configured to produce NV12 output and the VDOA is available, the VDOA can be used to transform the custom macroblock tiled format to a raster-ordered format for scanout. In this case, set the output format of the CODA to the custom macroblock tiled format, disable the rotator, and use the VDOA to write to the v4l2 buffer. The VDOA is synchronized with the CODA to always un-tile the frame that the CODA finished in the previous run. Signed-off-by:
-
Michael Tretter authored
display_idx refers to the frame that will be returned in the next round. The currently processed frame is ctx->display_idx and errors should be reported for this frame. Signed-off-by:
-
Philipp Zabel authored
In order to make the VDOA work correctly, the CODA must produce frames in tiled format. Print this information in the debug output. Also print the color format in fourcc instead of the numeric value. Signed-off-by:
-
Philipp Zabel authored
Correctly store the rectangle of valid video data in the destination q_data before rounding up to macroblock size. This fixes the output of VIDIOC_G_SELECTION for the capture side compose rectangle. Signed-off-by:
-
Mauro Carvalho Chehab authored
As warned by checkpatch: WARNING: struct of_device_id should normally be const #318: FILE: drivers/media/platform/coda/imx-vdoa.c:318: +static struct of_device_id vdoa_dt_ids[] = { So, constify structs. Signed-off-by: -
Philipp Zabel authored
The i.MX6 Video Data Order Adapter's (VDOA) sole purpose is to convert from a custom macroblock tiled format produced by the CODA960 decoder into linear formats that can be used for scanout. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Philipp Zabel authored
Add a DT binding documentation for the Video Data Order Adapter (VDOA) of the Freescale i.MX6 SoC. Also, add the compatible property and correct clock to the device tree to match the documentation. Signed-off-by:
-
