Do not follow the frame pointers (/proc/X/task/1/stat) unless we were
compiled with them.
Signed-off-by: David McCullough <david_mccullough@au.securecomputing.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Fix the shell call to explicitly use bash, since they are bash
specific and not all systems have bash as the default.
Signed-off-by: David McCullough <david_mccullough@au.securecomputing.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Some SH-3 parts (SH7720 and SH7705 at least) need to have the
start bit explicitly cleared, as the reset is not enough. This
is safe across all parts, so simply clear the start bit in
the sh_rtc_set_time() path.
Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch removes old dead code:
- kill off sh7300 cpu support
- get rid of broken solution engine 7300 board support
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Presently we only use this with CONFIG_EXPERIMENTAL, but it is
something that can be supported commonly.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Wire up ARCH_NO_VIRT_TO_BUS, and kill off the remaining users. The
dma-mapping code really wanted virt_to_phys()/phys_to_virt() anyways,
there are no inherently special bus addresses.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch makes sure the sci serial port driver compiles for sh7708.
The approach taken is to treat the sh7708 as a subset of sh7706, sh7707,
sh7709. sh7708 is very similar to sh7706, sh7707, sh7709, but only
equipped with a single sci port. The platform data in setup-sh770x.c
already limits the number of serial ports for sh7708 to a single one,
so the non-existing scif ports pointed out in sh-sci.h will remain
unused in case of sh7708.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Not all CPUs support the DSP, and this leads to problems when mixing
and matching CPU types and DSP opcodes. Fix this up by only allowing
CONFIG_SH_DSP to be enabled for the CPUs that explicitly have such a
block.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

There was a stray header, and the mach-type removal was also
missed.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This patch removes old dead code:
- kill off sh73180 cpu support
- get rid of broken solution engine 73180 board support
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The code in arch/sh/kernel/cpu/irq/pint.c doesn't compile, so let's
get rid of it to make space for a future pint implementation on top
of intc.
Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The first 1MB of P3 space was reserved and used for page colouring,
as we've reworked that to use fixmaps, we can reclaim the space and
hand it back to VMALLOC_START.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The current SH DMA API is somewhat broken, not correctly matching
virtual channel to the correct SH DMAC. This wasn't noticeable when
using g2 DMA for the sound driver - one channel 0 is as good as any
other! - but caused the pvr2 driver to fail.

This patch fixes the pvr2 problem and consequently fixes the sound
driver to ensure it continues to function.

Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This wires up kmap_coherent() and kunmap_coherent() on SH-4, and
moves away from the p3map_mutex and reserved P3 space, opting to
use fixmaps for colouring instead.

The copy_user_page()/clear_user_page() implementations are moved
to this, which fixes the nasty blowups with spinlock debugging
as a result of having some of these calls nested under the page
table lock.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This avoids a conflict with sparse builds.

Reported by Alexey Dobriyan, fix suggested by Al Viro
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The recent 9p commit: bd238fb4 that
supposedly only moved files also introduced a new 9p sysctl interface
that did not properly register it's sysctl binary numbers.

And since it was only for debugging clearly did not need a binary fast
path in any case.  So this patch just remove the binary numbers.

See Documentation/sysctl/ctl_unnumbered.txt for more details.

While I was at it I cleaned up the sysctl initializers a little as
well so there is less to read.

Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a typo in SubmittingPatches where "probably" was spelt "probabally".
Signed-off-by: Linus Nilsson <lajnold@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Change a headline to reflect that there are three main types of kernel
locking, not two.
Signed-off-by: Linus Nilsson <lajnold@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ehca: Support small QP queues
  IB/ehca: Make internal_create/destroy_qp() static
  IB/ehca: Move ehca2ib_return_code() out of line
  IB/ehca: Generate async event when SRQ limit reached
  IB/ehca: Support large page MRs
  IB/mlx4: Fix error path in create_qp_common()
  mlx4_core: Change command token on timeout
  IB/mthca: Change command token on timeout
  IB/ipath: Remove ipath_layer dead code
  IB/mlx4: Fix leaks in __mlx4_ib_modify_qp

Now that the last inlined instances are gone, all that is left to do
is turning disable_irq_nosync on arm26 and m68k from defines to aliases
and we are all set - we can make these externs in linux/interrupt.h
uncoditional and kill remaining instances in asm/irq.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits)
  [SCSI] libsas: make ATA functions selectable by a config option
  [SCSI] bsg: unexport sg v3 helper functions
  [SCSI] bsg: fix bsg_unregister_queue
  [SCSI] bsg: make class backlinks
  [SCSI] 3w-9xxx: add support for 9690SA
  [SCSI] bsg: fix bsg_register_queue error path
  [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275.
  [SCSI] libsas: fix scr_read/write users and update the libata documentation
  [SCSI] mpt fusion: update Kconfig help
  [SCSI] scsi_transport_sas: add destructor for bsg
  [SCSI] iscsi_tcp: buggered kmalloc()
  [SCSI] qla2xxx: Update version number to 8.02.00-k2.
  [SCSI] qla2xxx: Add ISP25XX support.
  [SCSI] qla2xxx: Use pci_try_set_mwi().
  [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces.
  [SCSI] qla2xxx: Re-factor isp_operations to static structures.
  [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling.
  [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration.
  [SCSI] qla2xxx: Generalize iIDMA support.
  [SCSI] qla2xxx: Generalize FW-Interface-2 support.
  ...

Not everyone wants libsas automatically to pull in libata.  This patch
makes the behaviour configurable, so you can build libsas with or
without ATA support.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (60 commits)
  [ARM] 4524/1: S3C: Move register out of include/asm-arm/arch-s3c2410
  [ARM] 4523/1: S3C: Remove FIFO_MAX from uncompression headers
  [ARM] 4522/1: S3C: split include/asm-arm/arch/memory.h
  [ARM] 4521/2: S3C: Reorganise VA mapping headers
  [ARM] 4520/1: S3C: Remove old VA values from static map
  [ARM] 4519/1: S3C: split S3C2400 values out of S3C24XX map.h
  [ARM] 4518/1: S3C: Rename watchdog configuration options
  [ARM] 4517/1: S3C: Fix debug macros for ARM926 output
  [ARM] 4516/1: S3C: Fix uncompressor serial output for ARM926
  [ARM] 4515/1: S3C: Move uncompress code to plat-s3c
  [ARM] 4514/1: S3C: Rename DEBUG_S3C2410_PORT and DEBUG_S3C_UART
  [ARM] 4513/1: S3C: Rename CONFIG_S3C2410_LOWLEVEL_UART_PORT
  [ARM] 4512/1: S3C: rename the debug macros for per-cpu updates
  [ARM] 4511/1: S3C: updated LLSERIAL Kconfig defines for CPU support
  [ARM] 4510/1: S3C: split debug-macro support into plat-s3c
  [ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c
  [ARM] 4508/1: S3C: Move items to include/asm-arm/plat-s3c
  [ARM] 4461/1: MXC platform and i.MX31ADS core support
  [ARM] 4507/1: pxa2xx clock_event_device
  [ARM] 4497/1: Only allow safe cache configurations on ARMv6 and later
  ...

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Convert from struct class_device to struct device
  leds: leds-gpio for ngw100
  leds: Add warning printks in error paths
  leds: Fix trigger unregister_simple if register_simple fails
  leds: Use menuconfig objects II - LED
  leds: Teach leds-gpio to handle timer-unsafe GPIOs
  leds: Add generic GPIO LED driver

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  leds: cr_bllcd.c: build fix
  backlight: Convert from struct class_device to struct device
  backlight: Fix order of Kconfig entries

* 'audit.b39' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
  [PATCH] get rid of AVC_PATH postponed treatment
  [PATCH] allow audit filtering on bit & operations
  [PATCH] audit: fix broken class-based syscall audit
  [PATCH] Make IPC mode consistent

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Clean up duplicate includes in drivers/macintosh/
  [POWERPC] Quiet section mismatch warning on pcibios_setup
  [POWERPC] init and exit markings for hvc_iseries
  [POWERPC] Quiet section mismatch in hvc_rtas.c
  [POWERPC] Constify of_platform_driver match_table
  [POWERPC] hvcs: Make some things static and const
  [POWERPC] Constify of_platform_driver name
  [POWERPC] MPIC protected sources
  [POWERPC] of_detach_node()'s device node argument cannot be const
  [POWERPC] Fix ARCH=ppc builds
  [POWERPC] mv64x60: Use mutex instead of semaphore
  [POWERPC] Allow smp_call_function_single() to current cpu
  [POWERPC] Allow exec faults on readable areas on classic 32-bit PowerPC
  [POWERPC] Fix future firmware feature fixups function failure
  [POWERPC] fix showing xmon help
  [POWERPC] Make xmon_write accept a const buffer
  [POWERPC] Fix misspelled "CONFIG_CHECK_CACHE_COHERENCY" Kconfig option.
  [POWERPC] cell: CONFIG_SPE_BASE is a typo

Fix

WARNING: vmlinux.o(.data+0x99): Section mismatch: reference to .init.text:xen_start_kernel (between 'startup_xen' and 'boot_gdt_descr')
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Obviously broken on little-endian; fortunately, the option is not
frequently used...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ Hey, sparse is wonderful, but even better than sparse is having people
  like Al that actually _run_ it and fix bugs using it.    - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Found by Sebastian Siewior and randconfig.
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (77 commits)
  ACPI: Populate /sys/firmware/acpi/tables/
  ACPI: create CONFIG_ACPI_DEBUG_FUNC_TRACE
  ACPI: update ACPI proc I/F removal schedule
  ACPI: update feature-removal-schedule.txt, /sys/firmware/acpi/namespace is gone
  ACPI: export ACPI events via acpi_mc_group multicast group
  ACPI: fix empty macros found by -Wextra
  ACPI: drivers/acpi/pci_link.c: lower printk severity
  sony-laptop: Fix event reading in sony-laptop
  sony-laptop: Add Vaio FE to the special init sequence
  sony-laptop: Make the driver use MSC_SCAN and a setkeycode and getkeycode key table.
  sony-laptop: Invoke _INI for SNC devices that provide it
  sony-laptop: Add support for recent Vaios Fn keys (C series for now)
  sony-laptop: map wireless switch events to KEY_WLAN
  sony-laptop: add new SNC handlers
  ACPI: thinkpad-acpi: add locking to brightness subdriver
  ACPI: thinkpad-acpi: bump up version to 0.15
  ACPI: thinkpad-acpi: make EC-based thermal readings non-experimental
  ACPI: thinkpad-acpi: make sure DSDT TMPx readings don't return +128
  ACPI: thinkpad-acpi: react to Lenovo ThinkPad differences in hot key
  ACPI: thinkpad-acpi: allow use of CMOS NVRAM for brightness control
  ...

They are identical

Indirectly pointed out by Thomas Gleixner
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

64bit code in there now since some time.
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Get rid of warnings like

WARNING: vmlinux.o(.bootstrap.text+0x1a8): Section mismatch: reference to .init.text:x86_64_start_kernel (between 'initial_code' and 'init_rsp')

- Move initialization code into .text.head like i386 because modpost knows about this already
- Mark initial_code .initdata
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix following warning:
WARNING: vmlinux.o(.text+0x188ea): Section mismatch: reference to .init.text:__alloc_bootmem_core (between 'alloc_bootmem_high_node' and 'get_gate_vma')

alloc_bootmem_high_node() is only used from __init scope so declare it __init.
And in addition declare the weak variant __init too.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix following warnings:
WARNING: vmlinux.o(.text+0x945e): Section mismatch: reference to .init.text:__set_fixmap (between 'hpet_arch_init' and 'hpet_mask_rtc_irq_bit')
WARNING: vmlinux.o(.text+0x9474): Section mismatch: reference to .init.text:__set_fixmap (between 'hpet_arch_init' and 'hpet_mask_rtc_irq_bit')

hpet_arch_init is only used from __init context so mark it __init.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The performance counters on K7 are only 48 bits wide, so using bit 63 to
check if the counter overflowed is wrong. Let's use bit 47 instead.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de>
Cc: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>