- 04 Aug, 2019 40 commits
-
-
Vasily Gorbik authored
[ Upstream commit 33177f01 ] gcc asan instrumentation emits the following sequence to store frame pc when the kernel is built with CONFIG_RELOCATABLE: debug/vsprintf.s: .section .data.rel.ro.local,"aw" .align 8 .LC3: .quad .LASANPC4826@GOTOFF .text .align 8 .type number, @function number: .LASANPC4826: and in case reloc is issued for LASANPC label it also gets into .symtab with the same address as actual function symbol: $ nm -n vmlinux | grep 0000000001397150 0000000001397150 t .LASANPC4826 0000000001397150 t number In the end kernel backtraces are almost unreadable: [ 143.748476] Call Trace: [ 143.748484] ([<000000002da3e62c>] .LASANPC2671+0x114/0x190) [ 143.748492] [<000000002eca1a58>] .LASANPC2612+0x110/0x160 [ 143.748502] [<000000002de9d830>] print_address_description+0x80/0x3b0 [ 143.748511] [<000000002de9dd64>] __kasan_report+0x15c/0x1c8 [ 143.748521] [<000000002ecb56d4>] strrchr+0x34/0x60 [ 143.748534] [<000003ff800a9a40>] kasan_strings+0xb0/0x148 [test_kasan] [ 143.748547] [<000003ff800a9bba>] kmalloc_tests_init+0xe2/0x528 [test_kasan] [ 143.748555] [<000000002da2117c>] .LASANPC4069+0x354/0x748 [ 143.748563] [<000000002dbfbb16>] do_init_module+0x136/0x3b0 [ 143.748571] [<000000002dbff3f4>] .LASANPC3191+0x2164/0x25d0 [ 143.748580] [<000000002dbffc4c>] .LASANPC3196+0x184/0x1b8 [ 143.748587] [<000000002ecdf2ec>] system_call+0xd8/0x2d8 Since LASANPC labels are not even unique and get into .symtab only due to relocs filter them out in kallsyms. Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit 8493eab0 ] When uart_flush_buffer() is called, the .flush_buffer() callback zeroes the tx_dma_len field. This may race with the work queue function handling transmit DMA requests: 1. If the buffer is flushed before the first DMA API call, dmaengine_prep_slave_single() may be called with a zero length, causing the DMA request to never complete, leading to messages like: rcar-dmac e7300000.dma-controller: Channel Address Error happen and, with debug enabled: sh-sci e6e88000.serial: sci_dma_tx_work_fn: ffff800639b55000: 0...0, cookie 126 and DMA timeouts. 2. If the buffer is flushed after the first DMA API call, but before the second, dma_sync_single_for_device() may be called with a zero length, causing the transmit data not to be flushed to RAM, and leading to stale data being output. Fix this by: 1. Letting sci_dma_tx_work_fn() return immediately if the transmit buffer is empty, 2. Extending the critical section to cover all DMA preparational work, so tx_dma_len stays consistent for all of it, 3. Using local copies of circ_buf.head and circ_buf.tail, to make sure they match the actual operation above. Reported-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Suggested-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit 775b7ffd ] While the .flush_buffer() callback clears sci_port.tx_dma_len since commit 1cf4a7ef ("serial: sh-sci: Fix race condition causing garbage during shutdown"), it does not terminate a transmit DMA operation that may be in progress. Fix this by terminating any pending DMA operations, and resetting the corresponding cookie. Signed-off-by:
-
Liu, Changcheng authored
[ Upstream commit 2e67e775 ] The API for ib_query_qp requires the driver to set qp_state and cur_qp_state on return, add the missing sets. Fixes: d3749841 ("i40iw: add files for iwarp interface") Signed-off-by:
Changcheng Liu <changcheng.liu@aliyun.com> Acked-by:
Shiraz Saleem <shiraz.saleem@intel.com> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Christian Lamparter authored
[ Upstream commit 3ab3a068 ] When testing out gpio-keys with a button, a spurious interrupt (and therefore a key press or release event) gets triggered as soon as the driver enables the irq line for the first time. This patch clears any potential bogus generated interrupt that was caused by the switching of the associated irq's type and polarity. Signed-off-by:
Christian Lamparter <chunkeey@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 80bf6cea ] When we get into activate_mm(), lockdep complains that we're doing something strange: WARNING: possible circular locking dependency detected 5.1.0-10252-gb00152307319-dirty #121 Not tainted ------------------------------------------------------ inside.sh/366 is trying to acquire lock: (____ptrval____) (&(&p->alloc_lock)->rlock){+.+.}, at: flush_old_exec+0x703/0x8d7 but task is already holding lock: (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mm->mmap_sem){++++}: [...] __lock_acquire+0x12ab/0x139f lock_acquire+0x155/0x18e down_write+0x3f/0x98 flush_old_exec+0x748/0x8d7 load_elf_binary+0x2ca/0xddb [...] -> #0 (&(&p->alloc_lock)->rlock){+.+.}: [...] __lock_acquire+0x12ab/0x139f lock_acquire+0x155/0x18e _raw_spin_lock+0x30/0x83 flush_old_exec+0x703/0x8d7 load_elf_binary+0x2ca/0xddb [...] other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_sem); lock(&(&p->alloc_lock)->rlock); lock(&mm->mmap_sem); lock(&(&p->alloc_lock)->rlock); *** DEADLOCK *** 2 locks held by inside.sh/366: #0: (____ptrval____) (&sig->cred_guard_mutex){+.+.}, at: __do_execve_file+0x12d/0x869 #1: (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7 stack backtrace: CPU: 0 PID: 366 Comm: inside.sh Not tainted 5.1.0-10252-gb00152307319-dirty #121 Stack: [...] Call Trace: [<600420de>] show_stack+0x13b/0x155 [<6048906b>] dump_stack+0x2a/0x2c [<6009ae64>] print_circular_bug+0x332/0x343 [<6009c5c6>] check_prev_add+0x669/0xdad [<600a06b4>] __lock_acquire+0x12ab/0x139f [<6009f3d0>] lock_acquire+0x155/0x18e [<604a07e0>] _raw_spin_lock+0x30/0x83 [<60151e6a>] flush_old_exec+0x703/0x8d7 [<601a8eb8>] load_elf_binary+0x2ca/0xddb [...] I think it's because in exec_mmap() we have down_read(&old_mm->mmap_sem); ... task_lock(tsk); ... activate_mm(active_mm, mm); (which does down_write(&mm->mmap_sem)) I'm not really sure why lockdep throws in the whole knowledge about the task lock, but it seems that old_mm and mm shouldn't ever be the same (and it doesn't deadlock) so tell lockdep that they're different. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Axel Lin authored
[ Upstream commit 7efd105c ] Since devm_regmap_init_mmio_clk can fail, add return value checking. Signed-off-by:
Axel Lin <axel.lin@ingics.com> Acked-by:
Chen Feng <puck.chen@hisilicon.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 5da6cbcd ] When the driver is used with a subdevice that is disabled in the kernel configuration, clang gets a little confused about the control flow and fails to notice that n_subdevs is only uninitialized when subdevs is NULL, and we check for that, leading to a false-positive warning: drivers/mfd/arizona-core.c:1423:19: error: variable 'n_subdevs' is uninitialized when used here [-Werror,-Wuninitialized] subdevs, n_subdevs, NULL, 0, NULL); ^~~~~~~~~ drivers/mfd/arizona-core.c:999:15: note: initialize the variable 'n_subdevs' to silence this warning int n_subdevs, ret, i; ^ = 0 Ideally, we would rearrange the code to avoid all those early initializations and have an explicit exit in each disabled case, but it's much easier to chicken out and add one more initialization here to shut up the warning. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by:
-
Robert Hancock authored
[ Upstream commit c176c6d7 ] The logic for setting the of_node on devices created by mfd did not set the fwnode pointer to match, which caused fwnode-based APIs to malfunction on these devices since the fwnode pointer was null. Fix this. Signed-off-by:
Robert Hancock <hancock@sedsystems.ca> Signed-off-by:
-
Naveen N. Rao authored
[ Upstream commit 80e5302e ] An impending change to enable HAVE_C_RECORDMCOUNT on powerpc leads to warnings such as the following: # modprobe kprobe_example ftrace-powerpc: Not expected bl: opcode is 3c4c0001 WARNING: CPU: 0 PID: 227 at kernel/trace/ftrace.c:2001 ftrace_bug+0x90/0x318 Modules linked in: CPU: 0 PID: 227 Comm: modprobe Not tainted 5.2.0-rc6-00678-g1c329100b942 #2 NIP: c000000000264318 LR: c00000000025d694 CTR: c000000000f5cd30 REGS: c000000001f2b7b0 TRAP: 0700 Not tainted (5.2.0-rc6-00678-g1c329100b942) MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228222 XER: 00000000 CFAR: c0000000002642fc IRQMASK: 0 <snip> NIP [c000000000264318] ftrace_bug+0x90/0x318 LR [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 Call Trace: [c000000001f2ba40] [0000000000000004] 0x4 (unreliable) [c000000001f2bad0] [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 [c000000001f2bb90] [c00000000020ff10] load_module+0x25b0/0x30c0 [c000000001f2bd00] [c000000000210cb0] sys_finit_module+0xc0/0x130 [c000000001f2be20] [c00000000000bda4] system_call+0x5c/0x70 Instruction dump: 419e0018 2f83ffff 419e00bc 2f83ffea 409e00cc 4800001c 0fe00000 3c62ff96 39000001 39400000 386386d0 480000c4 <0fe00000> 3ce20003 39000001 3c62ff96 ---[ end trace 4c438d5cebf78381 ]--- ftrace failed to modify [<c0080000012a0008>] 0xc0080000012a0008 actual: 01:00:4c:3c Initializing ftrace call sites ftrace record flags: 2000000 (0) expected tramp: c00000000006af4c Looking at the relocation records in __mcount_loc shows a few spurious entries: RELOCATION RECORDS FOR [__mcount_loc]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_ADDR64 .text.unlikely+0x0000000000000008 0000000000000008 R_PPC64_ADDR64 .text.unlikely+0x0000000000000014 0000000000000010 R_PPC64_ADDR64 .text.unlikely+0x0000000000000060 0000000000000018 R_PPC64_ADDR64 .text.unlikely+0x00000000000000b4 0000000000000020 R_PPC64_ADDR64 .init.text+0x0000000000000008 0000000000000028 R_PPC64_ADDR64 .init.text+0x0000000000000014 The first entry in each section is incorrect. Looking at the relocation records, the spurious entries correspond to the R_PPC64_ENTRY records: RELOCATION RECORDS FOR [.text.unlikely]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_REL64 .TOC.-0x0000000000000008 0000000000000008 R_PPC64_ENTRY *ABS* 0000000000000014 R_PPC64_REL24 _mcount <snip> The problem is that we are not validating the return value from get_mcountsym() in sift_rel_mcount(). With this entry, mcountsym is 0, but Elf_r_sym(relp) also ends up being 0. Fix this by ensuring mcountsym is valid before processing the entry. Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by:
-
Bastien Nocera authored
[ Upstream commit 208a68c8 ] On some machines, iio-sensor-proxy was returning all 0's for IIO sensor values. It turns out that the bits_used for this sensor is 32, which makes the mask calculation: *mask = (1 << 32) - 1; If the compiler interprets the 1 literals as 32-bit ints, it generates undefined behavior depending on compiler version and optimization level. On my system, it optimizes out the shift, so the mask value becomes *mask = (1) - 1; With a mask value of 0, iio-sensor-proxy will always return 0 for every axis. Avoid incorrect 0 values caused by compiler optimization. See original fix by Brett Dutro <brett.dutro@gmail.com> in iio-sensor-proxy: https://github.com/hadess/iio-sensor-proxy/commit/9615ceac7c134d838660e209726cd86aa2064fd3Signed-off-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Bharat Kumar Gogada authored
[ Upstream commit 181fa434 ] According to the PCI Local Bus specification Revision 3.0, section 6.8.1.3 (Message Control for MSI), endpoints that are Multiple Message Capable as defined by bits [3:1] in the Message Control for MSI can request a number of vectors that is power of two aligned. As specified in section 6.8.1.6 "Message data for MSI", the Multiple Message Enable field (bits [6:4] of the Message Control register) defines the number of low order message data bits the function is permitted to modify to generate its system software allocated vectors. The MSI controller in the Xilinx NWL PCIe controller supports a number of MSI vectors specified through a bitmap and the hwirq number for an MSI, that is the value written in the MSI data TLP is determined by the bitmap allocation. For instance, in a situation where two endpoints sitting on the PCI bus request the following MSI configuration, with the current PCI Xilinx bitmap allocation code (that does not align MSI vector allocation on a power of two boundary): Endpoint #1: Requesting 1 MSI vector - allocated bitmap bits 0 Endpoint #2: Requesting 2 MSI vectors - allocated bitmap bits [1,2] The bitmap value(s) corresponds to the hwirq number that is programmed into the Message Data for MSI field in the endpoint MSI capability and is detected by the root complex to fire the corresponding MSI irqs. The value written in Message Data for MSI field corresponds to the first bit allocated in the bitmap for Multi MSI vectors. The current Xilinx NWL MSI allocation code allows a bitmap allocation that is not a power of two boundaries, so endpoint #2, is allowed to toggle Message Data bit[0] to differentiate between its two vectors (meaning that the MSI data will be respectively 0x0 and 0x1 for the two vectors allocated to endpoint #2). This clearly aliases with the Endpoint #1 vector allocation, resulting in a broken Multi MSI implementation. Update the code to allocate MSI bitmap ranges with a power of two alignment, fixing the bug. Fixes: ab597d35 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Suggested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
-
Nathan Chancellor authored
[ Upstream commit 589834b3 ] In commit ebcc5928 ("arm64: Silence gcc warnings about arch ABI drift"), the arm64 Makefile added -Wno-psabi to KBUILD_CFLAGS, which is a GCC only option so clang rightfully complains: warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option However, by default, this is merely a warning so the build happily goes on with a slew of these warnings in the process. Commit c3f0d0bc ("kbuild, LLVMLinux: Add -Werror to cc-option to support clang") worked around this behavior in cc-option by adding -Werror so that unknown flags cause an error. However, this all happens silently and when an unknown flag is added to the build unconditionally like -Wno-psabi, cc-option will always fail because there is always an unknown flag in the list of flags. This manifested as link time failures in the arm64 libstub because -fno-stack-protector didn't get added to KBUILD_CFLAGS. To avoid these weird cryptic failures in the future, make clang behave like gcc and immediately error when it encounters an unknown flag by adding -Werror=unknown-warning-option to CLANG_FLAGS. This can be added unconditionally for clang because it is supported by at least 3.0.0, according to godbolt [1] and 4.0.0, according to its documentation [2], which is far earlier than we typically support. [1]: https://godbolt.org/z/7F7rm3 [2]: https://releases.llvm.org/4.0.0/tools/clang/docs/DiagnosticsReference.html#wunknown-warning-option Link: https://github.com/ClangBuiltLinux/linux/issues/511 Link: https://github.com/ClangBuiltLinux/linux/issues/517Suggested-by:
Peter Smith <peter.smith@linaro.org> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit dc6b698a ] With CONFIG_PROVE_LOCKING=y, using sysfs to remove a bridge with a device below it causes a lockdep warning, e.g., # echo 1 > /sys/class/pci_bus/0000:00/device/0000:00:00.0/remove ============================================ WARNING: possible recursive locking detected ... pci_bus 0000:01: busn_res: [bus 01] is released The remove recursively removes the subtree below the bridge. Each call uses a different lock so there's no deadlock, but the locks were all created with the same lockdep key so the lockdep checker can't tell them apart. Mark the "remove" sysfs attribute with __ATTR_IGNORE_LOCKDEP() as it is safe to ignore the lockdep check between different "remove" kernfs instances. There's discussion about a similar issue in USB at [1], which resulted in 356c05d5 ("sysfs: get rid of some lockdep false positives") and e9b526fe ("i2c: suppress lockdep warning on delete_device"), which do basically the same thing for USB "remove" and i2c "delete_device" files. [1] https://lore.kernel.org/r/Pine.LNX.4.44L0.1204251436140.1206-100000@iolanthe.rowland.org Link: https://lore.kernel.org/r/20190526225151.3865-1-marek.vasut@gmail.comSigned-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> [bhelgaas: trim commit log, details at above links] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Tejun Heo <tj@kernel.org> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit df5be5be ] When the firmware does PCI BAR resource allocation, it passes the assigned addresses and flags (prefetch/64bit/...) via the "reg" property of a PCI device device tree node so the kernel does not need to do resource allocation. The flags are stored in resource::flags - the lower byte stores PCI_BASE_ADDRESS_SPACE/etc bits and the other bytes are IORESOURCE_IO/etc. Some flags from PCI_BASE_ADDRESS_xxx and IORESOURCE_xxx are duplicated, such as PCI_BASE_ADDRESS_MEM_PREFETCH/PCI_BASE_ADDRESS_MEM_TYPE_64/etc. When parsing the "reg" property, we copy the prefetch flag but we skip on PCI_BASE_ADDRESS_MEM_TYPE_64 which leaves the flags out of sync. The missing IORESOURCE_MEM_64 flag comes into play under 2 conditions: 1. we remove PCI_PROBE_ONLY for pseries (by hacking pSeries_setup_arch() or by passing "/chosen/linux,pci-probe-only"); 2. we request resource alignment (by passing pci=resource_alignment= via the kernel cmd line to request PAGE_SIZE alignment or defining ppc_md.pcibios_default_alignment which returns anything but 0). Note that the alignment requests are ignored if PCI_PROBE_ONLY is enabled. With 1) and 2), the generic PCI code in the kernel unconditionally decides to: - reassign the BARs in pci_specified_resource_alignment() (works fine) - write new BARs to the device - this fails for 64bit BARs as the generic code looks at IORESOURCE_MEM_64 (not set) and writes only lower 32bits of the BAR and leaves the upper 32bit unmodified which breaks BAR mapping in the hypervisor. This fixes the issue by copying the flag. This is useful if we want to enforce certain BAR alignment per platform as handling subpage sized BARs is proven to cause problems with hotplug (SLOF already aligns BARs to 64k). Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Shawn Anastasio <shawn@anastas.io> Signed-off-by:
-
Andrzej Pietrasiewicz authored
[ Upstream commit 50859551 ] In some cases the "Allocate & copy" block in ffs_epfile_io() is not executed. Consequently, in such a case ffs_alloc_buffer() is never called and struct ffs_io_data is not initialized properly. This in turn leads to problems when ffs_free_buffer() is called at the end of ffs_epfile_io(). This patch uses kzalloc() instead of kmalloc() in the aio case and memset() in non-aio case to properly initialize struct ffs_io_data. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Serge Semin authored
[ Upstream commit 13b18d35 ] A bug was introduced by commit b3b57646 ("tty: serial_core: convert uart_open to use tty_port_open"). It caused a constant warning printed into the system log regarding the tty and port counter mismatch: [ 21.644197] ttyS ttySx: tty_port_close_start: tty->count = 1 port count = 2 in case if session hangup was detected so the warning is printed starting from the second open-close iteration. Particularly the problem was discovered in situation when there is a serial tty device without hardware back-end being setup. It is considered by the tty-serial subsystems as a hardware problem with session hang up. In this case uart_startup() will return a positive value with TTY_IO_ERROR flag set in corresponding tty_struct instance. The same value will get passed to be returned from the activate() callback and then being returned from tty_port_open(). But since in this case tty_port_block_til_ready() isn't called the TTY_PORT_ACTIVE flag isn't set (while the method had been called before tty_port_open conversion was introduced and the rest of the subsystem code expected the bit being set in this case), which prevents the uart_hangup() method to perform any cleanups including the tty port counter setting to zero. So the next attempt to open/close the tty device will discover the counters mismatch. In order to fix the problem we need to manually set the TTY_PORT_ACTIVE flag in case if uart_startup() returned a positive value. In this case the hang up procedure will perform a full set of cleanup actions including the port ref-counter resetting. Fixes: b3b57646 "tty: serial_core: convert uart_open to use tty_port_open" Signed-off-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 99b9683f ] When fixing up the clock in vop_crtc_mode_fixup() we're not doing it quite correctly. Specifically if we've got the true clock 266666667 Hz, we'll perform this calculation: 266666667 / 1000 => 266666 Later when we try to set the clock we'll do clk_set_rate(266666 * 1000). The common clock framework won't actually pick the proper clock in this case since it always wants clocks <= the specified one. Let's solve this by using DIV_ROUND_UP. Fixes: b59b8de3 ("drm/rockchip: return a true clock rate to adjusted_mode") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Reviewed-by:
Yakir Yang <ykk@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190614224730.98622-1-dianders@chromium.orgSigned-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit d4a36e82 ] This patch fixes memory leak at error paths of the probe function. In for_each_child_of_node, if the loop returns, the driver should call of_put_node() before returns. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Fixes: 1233f59f ("phy: Renesas R-Car Gen2 PHY driver") Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
David Riley authored
[ Upstream commit 9ff3a5c8 ] After data is copied to the cache entry, atomic_set is used indicate that the data is the entry is valid without appropriate memory barriers. Similarly the read side was missing the corresponding memory barriers. Signed-off-by:
David Riley <davidriley@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Rautkoski Kimmo EXT authored
[ Upstream commit db1b5bc0 ] Interrupt handler checked THRE bit (transmitter holding register empty) in LSR to detect if TX fifo is empty. In case when there is only receive interrupts the TX handling got called because THRE bit in LSR is set when there is no transmission (FIFO empty). TX handling caused TX stop, which in RS-485 half-duplex mode actually resets receiver FIFO. This is not desired during reception because of possible data loss. The fix is to check if THRI is set in IER in addition of the TX fifo status. THRI in IER is set when TX is started and cleared when TX is stopped. This ensures that TX handling is only called when there is really transmission on going and an interrupt for THRE and not when there are only RX interrupts. Signed-off-by:
Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com> Signed-off-by:
-
Jorge Ramirez-Ortiz authored
[ Upstream commit ba3684f9 ] The function msm_wait_for_xmitr can be taken with interrupts disabled. In order to avoid a potential system lockup - demonstrated under stress testing conditions on SoC QCS404/5 - make sure we wait for a bounded amount of time. Tested on SoC QCS404. Signed-off-by:
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by:
-
Kefeng Wang authored
[ Upstream commit c7ad9ba0 ] When modprobe/rmmod/modprobe module, if platform_driver_register() fails, the kernel complained, proc_dir_entry 'driver/digicolor-usart' already registered WARNING: CPU: 1 PID: 5636 at fs/proc/generic.c:360 proc_register+0x19d/0x270 Fix this by adding uart_unregister_driver() when platform_driver_register() fails. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Wang Hai authored
[ Upstream commit 65f1a0d3 ] If bus_register fails. On its error handling path, it has cleaned up what it has done. There is no need to call bus_unregister again. Otherwise, if bus_unregister is called, issues such as null-ptr-deref will arise. Syzkaller report this: kobject_add_internal failed for memstick (error: -12 parent: bus) BUG: KASAN: null-ptr-deref in sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467 Read of size 8 at addr 0000000000000078 by task syz-executor.0/4460 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 __kasan_report+0x171/0x18d mm/kasan/report.c:321 kasan_report+0xe/0x20 mm/kasan/common.c:614 sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467 sysfs_remove_file include/linux/sysfs.h:519 [inline] bus_remove_file+0x6c/0x90 drivers/base/bus.c:145 remove_probe_files drivers/base/bus.c:599 [inline] bus_unregister+0x6e/0x100 drivers/base/bus.c:916 ? 0xffffffffc1590000 memstick_init+0x7a/0x1000 [memstick] do_one_initcall+0xb9/0x3b5 init/main.c:914 do_init_module+0xe0/0x330 kernel/module.c:3468 load_module+0x38eb/0x4270 kernel/module.c:3819 __do_sys_finit_module+0x162/0x190 kernel/module.c:3909 do_syscall_64+0x72/0x2a0 arch/x86/entry/common.c:298 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: baf8532a ("memstick: initial commit for Sony MemoryStick support") Reported-by:
Wang Hai <wanghai26@huawei.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Jyri Sarha authored
[ Upstream commit 8dbfc5b6 ] The pixel clock unit in the first two registers (0x00 and 0x01) of sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by 10 fixes the issue. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 32315730 ] We need to know the link bandwidth to filter out modes we cannot support, so we need to have read the display props before doing the filtering. To ensure we have up to date display props, call tc_get_display_props() in the beginning of tc_connector_get_modes(). Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
-
Christophe Leroy authored
[ Upstream commit 06aaa3d0 ] SMC relocation can also be activated earlier by the bootloader, so the driver's behaviour cannot rely on selected kernel config. When the SMC is relocated, CPM_CR_INIT_TRX cannot be used. But the only thing CPM_CR_INIT_TRX does is to clear the rstate and tstate registers, so this can be done manually, even when SMC is not relocated. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 9ab92120 ("cpm_uart: fix non-console port startup bug") Signed-off-by:
-
Wen Yang authored
[ Upstream commit 3c89c706 ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/pinctrl/pinctrl-rockchip.c:3221:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function. ./drivers/pinctrl/pinctrl-rockchip.c:3223:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: linux-gpio@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Serge Semin authored
[ Upstream commit 35240ba2 ] Current calculator doesn't do it' job quite correct. First of all the max310x baud-rates generator supports the divisor being less than 16. In this case the x2/x4 modes can be used to double or quadruple the reference frequency. But the current baud-rate setter function just filters all these modes out by the first condition and setups these modes only if there is a clocks-baud division remainder. The former doesn't seem right at all, since enabling the x2/x4 modes causes the line noise tolerance reduction and should be only used as a last resort to enable a requested too high baud-rate. Finally the fraction is supposed to be calculated from D = Fref/(c*baud) formulae, but not from D % 16, which causes the precision loss. So to speak the current baud-rate calculator code works well only if the baud perfectly fits to the uart reference input frequency. Lets fix the calculator by implementing the algo fully compliant with the fractional baud-rate generator described in the datasheet: D = Fref / (c*baud), where c={16,8,4} is the x1/x2/x4 rate mode respectively, Fref - reference input frequency. The divisor fraction is calculated from the same formulae, but making sure it is found with a resolution of 0.0625 (four bits). Signed-off-by:
-
Thinh Nguyen authored
[ Upstream commit 56175929 ] If the device rejects the control transfer to enable device-initiated U1/U2 entry, then the device will not initiate U1/U2 transition. To improve the performance, the downstream port should not initate transition to U1/U2 to avoid the delay from the device link command response (no packet can be transmitted while waiting for a response from the device). If the device has some quirks and does not implement U1/U2, it may reject all the link state change requests, and the downstream port may resend and flood the bus with more requests. This will affect the device performance even further. This patch disables the hub-initated U1/U2 if the device-initiated U1/U2 entry fails. Reference: USB 3.2 spec 7.2.4.2.3 Signed-off-by:
Thinh Nguyen <thinhn@synopsys.com> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 7ad9db66 ] In case mipi_dsi_attach() fails remove the registered panel to avoid added panel without corresponding device. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226081153.31334-1-peter.ujfalusi@ti.comSigned-off-by:
-
Paul Menzel authored
[ Upstream commit 3b2d4dcf ] Since commit 10a68cdf (nfsd: fix performance-limiting session calculation) (Linux 5.1-rc1 and 4.19.31), shares from NFS servers with 1 TB of memory cannot be mounted anymore. The mount just hangs on the client. The gist of commit 10a68cdf is the change below. -avail = clamp_t(int, avail, slotsize, avail/3); +avail = clamp_t(int, avail, slotsize, total_avail/3); Here are the macros. #define min_t(type, x, y) __careful_cmp((type)(x), (type)(y), <) #define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi) `total_avail` is 8,434,659,328 on the 1 TB machine. `clamp_t()` casts the values to `int`, which for 32-bit integers can only hold values −2,147,483,648 (−2^31) through 2,147,483,647 (2^31 − 1). `avail` (in the function signature) is just 65536, so that no overflow was happening. Before the commit the assignment would result in 21845, and `num = 4`. When using `total_avail`, it is causing the assignment to be 18446744072226137429 (printed as %lu), and `num` is then 4164608182. My next guess is, that `nfsd_drc_mem_used` is then exceeded, and the server thinks there is no memory available any more for this client. Updating the arguments of `clamp_t()` and `min_t()` to `unsigned long` fixes the issue. Now, `avail = 65536` (before commit 10a68cdf `avail = 21845`), but `num = 4` remains the same. Fixes: c54f24e3 (nfsd: fix performance-limiting session calculation) Cc: stable@vger.kernel.org Signed-off-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit c54f24e3 ] We're unintentionally limiting the number of slots per nfsv4.1 session to 10. Often more than 10 simultaneous RPCs are needed for the best performance. This calculation was meant to prevent any one client from using up more than a third of the limit we set for total memory use across all clients and sessions. Instead, it's limiting the client to a third of the maximum for a single session. Fix this. Reported-by:
Chris Tracy <ctracy@engr.scu.edu> Cc: stable@vger.kernel.org Fixes: de766e57 "nfsd: give out fewer session slots as limit approaches" Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit de766e57 ] Instead of granting client's full requests until we hit our DRC size limit and then failing CREATE_SESSIONs (and hence mounts) completely, start granting clients smaller slot tables as we approach the limit. The factor chosen here is pretty much arbitrary. Signed-off-by:
-
J. Bruce Fields authored
[ Upstream commit 44d8660d ] An NFSv4.1+ client negotiates the size of its duplicate reply cache size in the initial CREATE_SESSION request. The server preallocates the memory for the duplicate reply cache to ensure that we'll never fail to record the response to a nonidempotent operation. To prevent a few CREATE_SESSIONs from consuming all of memory we set an upper limit based on nr_free_buffer_pages(). 1/2^10 has been too limiting in practice; 1/2^7 is still less than one percent. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 8fd1ab74 ] If the server that does not implement NFSv4.1 persistent session semantics reboots while we are performing an exclusive create, then the return value of NFS4ERR_DELAY when we replay the open during the grace period causes us to lose the verifier. When the grace period expires, and we present a new verifier, the server will then correctly reply NFS4ERR_EXIST. This commit ensures that we always present the same verifier when replaying the OPEN. Reported-by:
Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Suravee Suthikulpanit authored
Current logic iterates over CPUID Fn8000001d leafs (Cache Properties) to detect the last level cache, and derive the last-level cache ID. However, this information is already available in the cpu_llc_id. Therefore, make use of it instead. Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Link: http://lkml.kernel.org/r/1524864877-111962-3-git-send-email-suravee.suthikulpanit@amd.com
-
Janakarajan Natarajan authored
In Family 17h, the number of cores sharing a cache level is obtained from the Cache Properties CPUID leaf (0x8000001d) by passing in the cache level in ECX. In prior families, a cache level of 2 was used to determine this information. To get the right information, irrespective of Family, iterate over the cache levels using CPUID 0x8000001d. The last level cache is the last value to return a non-zero value in EAX. Signed-off-by:
Janakarajan Natarajan <Janakarajan.Natarajan@amd.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by:
Ingo Molnar <mingo@kernel.org>
-
Janakarajan Natarajan authored
This patch renames L2 counters to LLC counters. In AMD Family17h processors, L3 cache counter is supported. Since older families have at most L2 counters, last level cache (LLC) indicates L2/L3 based on the family. Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 2446a68a ] Don't cache eth dest pointer before calling pskb_may_pull. Fixes: cf0f02d0 ("[BRIDGE]: use llc for receiving STP packets") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
