This patch fixes all "foo * bar", "foo*bar", "foo* bar" checkpatch.pl errors for
rtl8188eu.
Signed-off-by: Tim Jester-Pfadt <t.jp@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes all spaces required after ',' and around '=' aswell as '=='
checkpatch.pl errors for rtl8188eu.
Signed-off-by: Tim Jester-Pfadt <t.jp@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix a memory leak in the wpa_ioctl() error handling path so that 'param' is
also freed correctly in case of an unsupported ioctl.
Detected by Coverity: CID 144380.
Signed-off-by: Christian Engelmayer <cengelma@gmx.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch allows to select a specific video mode from a list of modes
defined in DT by setting the 'native-mode' property appropriately.

Since all current users of this driver have only one mode defined in
their .dts files, the patch does not change the behaviour of this
driver on the affected platforms.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

CRTC offsets are only set with the initial modeset, any
subseqent pageflips assume them to be kept the same, so
we need to remember the current state until another modeset
changes it.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We didn't take the pixel format into account, so x-direction
offsets were off by a factor of 2 or 4 for 16bpp and 32bpp
framebuffers.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Even though we do not enable the hardware double buffering feature
right now, set the second base address pointer (EBA1) as well to
increase robustness.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch for ni_mio_common.c removes extra whitespace causing
checkpatch.pl warnings.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch for ni_mio_common.c fixes several indentation warnings from
checkpatch.pl.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch for ni_mio_common.c removes many unneccesary braces to fix
checkpatch.pl warnings.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds Comedi driver for Humusoft MF634 (PCIe) and
MF624 (PCI) data acquisition cards. The legacy card Humusoft
MF614 is not supported. More info about the cards may be found
at http://humusoft.cz/produkty/datacq/
The driver was tested with both cards. Everything seems to work
properly. Just the basic functionality of the card (DIO, ADC, DAC)
is supported by this driver.
Signed-off-by: Rostislav Lisovy <lisovy@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DWC2 driver should now be in good enough shape to move out of
staging. I have stress tested it overnight on RPI running mass
storage and Ethernet transfers in parallel, and for several days
on our proprietary PCI-based platform.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixed spelling typo in comment and printks
withing staging/bcm.
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are leaks of resources allocated by wlan_setup() and usb_dev refcnt
on failure paths in prism2sta_probe_usb().

The patch adds appropriate deallocations and removes invalid code
from hfa384x_corereset() failure handling.
unregister_wlandev() is wrong because it is not registered yet.
hfa384x_destroy() is just noop in init state.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed a coding style issues.
Signed-off-by: Michal Kwiatkowski <michaelflowersky@geekingspree.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch for 8255.c fixes a spacing warning found by checkpatch.pl.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes two spaces at the start of the line aswell as all space after
opening parenthesis and space before closeing parenthesis checkpatch.pl warnings
in rtw_mlme.h
Signed-off-by: Tim Jester-Pfadt <t.jp@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix sparse warnings for undeclared symbols not marked static like:
148:6: warning: symbol 'enqueue_mgmt' was not declared. Should it be static?
166:16: warning: symbol 'dequeue_mgmt' was not declared. Should it be static?
Signed-off-by: Anmol Sarma <me@anmolsarma.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following sparse warning:
27:5: warning: symbol 'rtl8180_rates' was not declared. Should it be static?
Signed-off-by: Anmol Sarma <me@anmolsarma.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix sparse warnings for undeclared symbols not marked static like:
390:6: warning: symbol 'buffer_free' was not declared. Should it be static?
1031:5: warning: symbol 'ComputeTxTime' was not declared. Should it be static?
Signed-off-by: Anmol Sarma <me@anmolsarma.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add support to the dummy driver for basic carveout and chunk heaps.

Since we're generating these heaps at module_init, and we want
this driver to be generic enough to be tested on any arch, we
don't have the ability to alloc bootmem, so both of these heaps
are conventionally allocated using alloc_pages(), which limits us
to 4M in size.

Should look into using CMA for heap allocation eventually, but
this provides enough to test the basic functionality of the
heaps.

Cc: Colin Cross <ccross@android.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jesse Barker <jesse.barker@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Provide a basic dummy driver to register the ion device
and to install basic SYSTEM and SYSTEM_CONTIG heaps.

This allows for basic testing with ION without having
access to drivers or systems that have been enabled to use
ION.

Cc: Colin Cross <ccross@android.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Jesse Barker <jesse.barker@arm.com>
Cc: Android Kernel Team <kernel-team@android.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comedi core now reports that a device has been attached so that
the driver itself won't need to do it any longer. The driver now
just outputs the offset of the ADC converter which is a soft indicator
of the health of the board and also the user can grep this value
from the kernel log easier for debugging purposes.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function usbduxsigma_getstatusinfo() returns a negative
value in case there has been a communication error with
the board. This should always work and if this communication
fails then there is something seriously wrong with the board.
This is now returned to the caller so that it can
terminte the auto attachement. The return command also prevents
printing out the offset value in case of a fault.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added success message to the driver autoconfig and error
message in case it fails. A success message is required
so that the user can find out which comedi driver has been
associated with which udev device. This also makes troubleshooting
much easier when more than one card is in the computer or
there is a mix of USB and PCI devices.
As Ian suggested we should report both the driver and the board
which might have different names, especially if one driver covers a
range of different boards.
Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`comedi_free_board_dev()` is called (via `comedi_auto_unconfig()` -->
`comedi_release_hardware_device()`) when an auto-configured comedi
device is removed.  This destroys the main sysfs class device and then
calls `comedi_device_cleanup()` to clean up the comedi device.  For
comedi devices that have comedi subdevices that asynchronous commands,
the clean up involves destroying the sysfs class devices associated with
those subdevices.

There is a bug in the above sequence because the sysfs class devices
associated with the comedi subdevices are children of the sysfs class
device associated with the main comedi device.  Therefore they will have
been automatically destroyed when the main sysfs class device is
destroyed.  When they are destroyed again as part of the clean-up, they
will not be found, leading to a warning and a stack trace similar to
this:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 1213 at fs/sysfs/group.c:214
sysfs_remove_group+0x4e/0xa7()
sysfs group ffffffff817504c0 not found for kobject 'comedi4_subd0'
Modules linked in: nfsd auth_rpcgss oid_registry exportfs nfs_acl lockd
bridge stp llc sunrpc fuse binfmt_misc cpufreq_userspace sr_mod
snd_hda_codec_analog cdrom powernow_k8 kvm_amd kvm amplc_pci230(C)
8255(C) comedi(C) pcmcia xhci_hcd ehci_pci pcmcia_core ohci_pci ohci_hcd
ehci_hcd usbcore snd_hda_intel snd_hda_codec snd_pcm k8temp
snd_page_alloc 8139too snd_timer snd soundcore mii usb_common forcedeth
pata_amd
CPU: 1 PID: 1213 Comm: kworker/u4:6 Tainted: G         C
3.13.0-rc5-ija1+ #20
Hardware name: System manufacturer System Product Name/M2N-E, BIOS ASUS
M2N-E ACPI BIOS Revision 5001 03/23/2010
Workqueue: sysfsd sysfs_schedule_callback_work
 0000000000000000 ffff8800bf17fb38 ffffffff814672ce ffff8800bf17fb80
 ffff8800bf17fb70 ffffffff8103470b ffffffff8114f780 0000000000000000
 ffffffff817504c0 ffff8800bf39f410 ffff880139b68670 ffff8800bf17fbd0
Call Trace:
 [<ffffffff814672ce>] dump_stack+0x45/0x56
 [<ffffffff8103470b>] warn_slowpath_common+0x7a/0x93
 [<ffffffff8114f780>] ? sysfs_remove_group+0x4e/0xa7
 [<ffffffff8103476b>] warn_slowpath_fmt+0x47/0x49
 [<ffffffff8114e92d>] ? sysfs_get_dirent_ns+0x5e/0x66
 [<ffffffff8114f780>] sysfs_remove_group+0x4e/0xa7
 [<ffffffff8132aac0>] dpm_sysfs_remove+0x37/0x3b
 [<ffffffff81323781>] device_del+0x3e/0x173
 [<ffffffff813238c3>] device_unregister+0xd/0x18
 [<ffffffff8132392e>] device_destroy+0x33/0x37
 [<ffffffffa0212086>] comedi_free_subdevice_minor+0x80/0x92 [comedi]
 [<ffffffffa02128bb>] comedi_device_detach+0x79/0x152 [comedi]
 [<ffffffffa020f223>] comedi_device_cleanup+0x36/0x57 [comedi]
 [<ffffffffa020f275>] comedi_free_board_dev+0x31/0x3c [comedi]
 [<ffffffffa0211f2a>] comedi_release_hardware_device+0x5a/0x73 [comedi]
 [<ffffffffa0212547>] comedi_auto_unconfig+0xe/0x10 [comedi]
 [<ffffffffa021357c>] comedi_pci_auto_unconfig+0x10/0x12 [comedi]
 [<ffffffff811d2335>] pci_device_remove+0x40/0x8a
 [<ffffffff813261d0>] __device_release_driver+0x84/0xda
 [<ffffffff81326244>] device_release_driver+0x1e/0x2b
 [<ffffffff811cdcb5>] pci_stop_bus_device+0x44/0x87
 [<ffffffff811cdde2>] pci_stop_and_remove_bus_device+0xd/0x18
 [<ffffffff811d3f3d>] remove_callback+0x20/0x2f
 [<ffffffff8114d1f7>] sysfs_schedule_callback_work+0xf/0x70
 [<ffffffff81049498>] process_one_work+0x1d6/0x34c
 [<ffffffff81049a5f>] worker_thread+0x1cf/0x2b5
 [<ffffffff81049890>] ? rescuer_thread+0x258/0x258
 [<ffffffff8104e0e6>] kthread+0xd6/0xde
 [<ffffffff8104e010>] ? kthread_create_on_node+0x160/0x160
 [<ffffffff81472cbc>] ret_from_fork+0x7c/0xb0
 [<ffffffff8104e010>] ? kthread_create_on_node+0x160/0x160
---[ end trace 94722aa2936a7adf ]---

To correct the bug, rearrange `comedi_free_board_dev()` to destroy the
main sysfs class device *after* the clean-up operation.

Thanks to Bernd Porr for finding the bug and his initial attempt to fix
it.
Reported-by: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Bernd Porr <mail@berndporr.me.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes a style issue regarding asterisk placement in
das1800.c and das6402.c found by checkpatch.pl.
Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

White space clean

Remove unneeded comments.

Camel case changes

pDevice,
byRTSRsvType
byPktType
cbFrameLength
wCurrentRate

uRrvTime
uRTSTime
uCTSTime
uAckTime
uDataTime

} -> {

priv,
rsv_type
pkt_type
frame_lenght
current_rate

rrv_time
rts_time
cts_time
ack_time
data_time
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

White space clean.

Remove unneeded comments.

Camel case changes
pDevice
byPktType
cbFrameLength
wRate
bNeedAck

uDataTime
uAckTime

} -> {

priv
pkt_type
frame_length
rate
need_ack

data_time
ack_time
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If the "dma-coherent" property is present in the device tree, the driver will
not perform cache invalidations. This feature significantly improves data
throughput and reduces CPU load.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The previous "compatible" string was poorly chosen, but remains in the
match list to support existing DTBs. There is no risk for a naming clash.
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interruptible_sleep_on is racy and going away. This replaces the
use in the gdm72xx driver with the appropriate
wait_event_interruptible_lock_irq.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sleep_on and related functions are going away and should not be used
in this driver any more.

This removes the call to interruptible_sleep_on for a wait queue that
is never woken up, and replaces an interruptible_sleep_on_timeout
call with the equivalent wait_event_interruptible_timeout() to
avoid a small race.

Both call sites still look fishy and need more work.

Signed-off-by: Arnd Bergmann <arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: devel@driverdev.osuosl.org
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

interruptible_sleep_on is racy and going away. This replaces the one
caller in the panel driver with the appropriate wait_event_interruptible
variant.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: devel@driverdev.osuosl.org
Cc: Willy Tarreau <willy@meta-x.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove a few spaces at beginning and end of line. Remove single statement
braces {}. Remove two FSF boilerplate paragraphs.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Lidza Louina <lidza.louina@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Scott H Kilau <Scott_Kilau@digi.com>
Cc: Eng.Linux@digi.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Include slab.h to fix the following compilation error:

  drivers/staging/dgap/dgap_fep5.c: In function ‘dgap_do_config_load’:
  drivers/staging/dgap/dgap_fep5.c:78:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration]
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Lidza Louina <lidza.louina@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Scott H Kilau <Scott_Kilau@digi.com>
Cc: Eng.Linux@digi.com
Cc: trivial@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

I fixed some brace coding style issues.
Signed-off-by: Gary Alan Rookard <garyrookard@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use upstream hashtable implementation instead of generic code
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The latest version of NetworkManager does not recognize the device as wireless
without this change.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>