- 11 Dec, 2014 40 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI changes from Bjorn Helgaas: "Here are the PCI changes intended for v3.19. I don't think there's anything very exciting here, but there was a lot of MSI-related stuff coming via Thomas. Details: NUMA - Allow numa_node override via sysfs (Prarit Bhargava) Resource management - Restore detection of read-only BARs (Myron Stowe) - Shrink decoding-disabled window while sizing BARs (Myron Stowe) - Add informational printk for invalid BARs (Myron Stowe) - Remove fixed parameter in pci_iov_resource_bar() (Myron Stowe) MSI - Add pci_msi_ignore_mask to prevent writes to MSI/MSI-X Mask Bits (Yijing Wang) - Revert "PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()" (Yijing Wang) - s390/MSI: Use __msi_mask_irq() instead of default_msi_mask_irq() (Yijing Wang) Virtualization - xen: Process failure for pcifront_(re)scan_root() (Chen Gang) - Make FLR and AF FLR reset warning messages different (Gavin Shan) Generic host bridge driver - Allocate config space windows after limiting bus number range (Lorenzo Pieralisi) - Convert to DT resource parsing API (Lorenzo Pieralisi) Freescale Layerscape - Add Freescale Layerscape PCIe driver (Minghuan Lian) NVIDIA Tegra - Do not build on 64-bit ARM (Thierry Reding) - Add Kconfig help text (Thierry Reding) Renesas R-Car - Make rcar_pci static (Jingoo Han) Samsung Exynos - Add exynos prefix to add_pcie_port(), pcie_init() (Jingoo Han) ST Microelectronics SPEAr13xx - Add spear prefix to add_pcie_port(), pcie_init() (Jingoo Han) - Make spear13xx_add_pcie_port() __init (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) TI DRA7xx - Add dra7xx prefix to add_pcie_port() (Jingoo Han) - Make dra7xx_add_pcie_port() __init (Jingoo Han) TI Keystone - Make ks_dw_pcie_msi_domain_ops static (Jingoo Han) - Remove unnecessary OOM message (Jingoo Han) Miscellaneous - Delete unnecessary NULL pointer checks (Markus Elfring) - Remove unused to_hotplug_slot() (Gavin Shan) - Whitespace cleanup (Jingoo Han) - Simplify if-return sequences (Quentin Lambert)" * tag 'pci-v3.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (28 commits) PCI: Remove fixed parameter in pci_iov_resource_bar() PCI: Add informational printk for invalid BARs PCI: tegra: Add Kconfig help text PCI: tegra: Do not build on 64-bit ARM PCI: spear: Remove unnecessary OOM message PCI: mvebu: Add a blank line after declarations PCI: designware: Add a blank line after declarations PCI: exynos: Remove unnecessary return statement PCI: imx6: Use tabs for indentation PCI: keystone: Remove unnecessary OOM message PCI: Remove unused and broken to_hotplug_slot() PCI: Make FLR and AF FLR reset warning messages different PCI: dra7xx: Add __init annotation to dra7xx_add_pcie_port() PCI: spear: Add __init annotation to spear13xx_add_pcie_port() PCI: spear: Rename add_pcie_port(), pcie_init() to spear13xx_add_pcie_port(), etc. PCI: dra7xx: Rename add_pcie_port() to dra7xx_add_pcie_port() PCI: layerscape: Add Freescale Layerscape PCIe driver PCI: Simplify if-return sequences PCI: Delete unnecessary NULL pointer checks PCI: Shrink decoding-disabled window while sizing BARs ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktestLinus Torvalds authored
Pull ktest changes from Steven Rostedt: "The following ktest updates were done: - Fix handling the make kernelrelease change - Fix make_min_config that was broken by new bisect_config changes - Allow tests to undefine default options (not just being able to override them) - Print name of test (if defined) to start of test output" * tag 'ktest-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest: ktest: Add back "tail -1" to kernelrelease make ktest: Add name to running title ktest: Allow tests to undefine default options ktest: Fix make_min_config to handle new assign_configs call ktest: Use make -s kernelrelease -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull nmi-safe seq_buf printk update from Steven Rostedt: "This code is a fork from the trace-3.19 pull as it needed the trace_seq clean ups from that branch. This code solves the issue of performing stack dumps from NMI context. The issue is that printk() is not safe from NMI context as if the NMI were to trigger when a printk() was being performed, the NMI could deadlock from the printk() internal locks. This has been seen in practice. With lots of review from Petr Mladek, this code went through several iterations, and we feel that it is now at a point of quality to be accepted into mainline. Here's what is contained in this patch set: - Creates a "seq_buf" generic buffer utility that allows a descriptor to be passed around where functions can write their own "printk()" formatted strings into it. The generic version was pulled out of the trace_seq() code that was made specifically for tracing. - The seq_buf code was change to model the seq_file code. I have a patch (not included for 3.19) that converts the seq_file.c code over to use seq_buf.c like the trace_seq.c code does. This was done to make sure that seq_buf.c is compatible with seq_file.c. I may try to get that patch in for 3.20. - The seq_buf.c file was moved to lib/ to remove it from being dependent on CONFIG_TRACING. - The printk() was updated to allow for a per_cpu "override" of the internal calls. That is, instead of writing to the console, a call to printk() may do something else. This made it easier to allow the NMI to change what printk() does in order to call dump_stack() without needing to update that code as well. - Finally, the dump_stack from all CPUs via NMI code was converted to use the seq_buf code. The caller to trigger the NMI code would wait till all the NMIs finished, and then it would print the seq_buf data to the console safely from a non NMI context One added bonus is that this code also makes the NMI dump stack work on PREEMPT_RT kernels. As printk() includes sleeping locks on PREEMPT_RT, printk() only writes to console if the console does not use any rt_mutex converted spin locks. Which a lot do" * tag 'trace-seq-buf-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: x86/nmi: Fix use of unallocated cpumask_var_t printk/percpu: Define printk_func when printk is not defined x86/nmi: Perform a safe NMI stack trace on all CPUs printk: Add per_cpu printk func to allow printk to be diverted seq_buf: Move the seq_buf code to lib/ seq-buf: Make seq_buf_bprintf() conditional on CONFIG_BINARY_PRINTF tracing: Add seq_buf_get_buf() and seq_buf_commit() helper functions tracing: Have seq_buf use full buffer seq_buf: Add seq_buf_can_fit() helper function tracing: Add paranoid size check in trace_printk_seq() tracing: Use trace_seq_used() and seq_buf_used() instead of len tracing: Clean up tracing_fill_pipe_page() seq_buf: Create seq_buf_used() to find out how much was written tracing: Add a seq_buf_clear() helper and clear len and readpos in init tracing: Convert seq_buf fields to be like seq_file fields tracing: Convert seq_buf_path() to be like seq_path() tracing: Create seq_buf layer in trace_seq -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace self-test updates from Steven Rostedt: "Updates for the ftrace self tests: - Added kprobes on ftrace testcase - Sort test cases - Add file to hold helper functions - Use logfile name supported by busybox's mktemp - Clear trace buffer after running kprobe test - Fix show descriptions when run on dash shell - Add --verbose option for showing echo output" * tag 'ftracetest-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftracetest: Add --verbose option for showing echo output ftracetest: Fix to show descriptions on dash ftracetest: Add basic event tracing test cases ftracetest: Clear trace buffer after running kprobe testcases ftracetest: Use logfile name supported by busybox's mktemp ftracetest: Add a couple of ftrace test cases ftracetest: Add functions file that holds helper functions ftracetest: Sort testcases ftracetest: Add kprobes on ftrace testcase
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "There was a lot of clean ups and minor fixes. One of those clean ups was to the trace_seq code. It also removed the return values to the trace_seq_*() functions and use trace_seq_has_overflowed() to see if the buffer filled up or not. This is similar to work being done to the seq_file code as well in another tree. Some of the other goodies include: - Added some "!" (NOT) logic to the tracing filter. - Fixed the frame pointer logic to the x86_64 mcount trampolines - Added the logic for dynamic trampolines on !CONFIG_PREEMPT systems. That is, the ftrace trampoline can be dynamically allocated and be called directly by functions that only have a single hook to them" * tag 'trace-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (55 commits) tracing: Truncated output is better than nothing tracing: Add additional marks to signal very large time deltas Documentation: describe trace_buf_size parameter more accurately tracing: Allow NOT to filter AND and OR clauses tracing: Add NOT to filtering logic ftrace/fgraph/x86: Have prepare_ftrace_return() take ip as first parameter ftrace/x86: Get rid of ftrace_caller_setup ftrace/x86: Have save_mcount_regs macro also save stack frames if needed ftrace/x86: Add macro MCOUNT_REG_SIZE for amount of stack used to save mcount regs ftrace/x86: Simplify save_mcount_regs on getting RIP ftrace/x86: Have save_mcount_regs store RIP in %rdi for first parameter ftrace/x86: Rename MCOUNT_SAVE_FRAME and add more detailed comments ftrace/x86: Move MCOUNT_SAVE_FRAME out of header file ftrace/x86: Have static tracing also use ftrace_caller_setup ftrace/x86: Have static function tracing always test for function graph kprobes: Add IPMODIFY flag to kprobe_ftrace_ops ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict kprobes/ftrace: Recover original IP if pre_handler doesn't change it tracing/trivial: Fix typos and make an int into a bool tracing: Deletion of an unnecessary check before iput() ... -
Linus Torvalds authored
Merge first patchbomb from Andrew Morton: - a few minor cifs fixes - dma-debug upadtes - ocfs2 - slab - about half of MM - procfs - kernel/exit.c - panic.c tweaks - printk upates - lib/ updates - checkpatch updates - fs/binfmt updates - the drivers/rtc tree - nilfs - kmod fixes - more kernel/exit.c - various other misc tweaks and fixes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits) exit: pidns: fix/update the comments in zap_pid_ns_processes() exit: pidns: alloc_pid() leaks pid_namespace if child_reaper is exiting exit: exit_notify: re-use "dead" list to autoreap current exit: reparent: call forget_original_parent() under tasklist_lock exit: reparent: avoid find_new_reaper() if no children exit: reparent: introduce find_alive_thread() exit: reparent: introduce find_child_reaper() exit: reparent: document the ->has_child_subreaper checks exit: reparent: s/while_each_thread/for_each_thread/ in find_new_reaper() exit: reparent: fix the cross-namespace PR_SET_CHILD_SUBREAPER reparenting exit: reparent: fix the dead-parent PR_SET_CHILD_SUBREAPER reparenting exit: proc: don't try to flush /proc/tgid/task/tgid exit: release_task: fix the comment about group leader accounting exit: wait: drop tasklist_lock before psig->c* accounting exit: wait: don't use zombie->real_parent exit: wait: cleanup the ptrace_reparented() checks usermodehelper: kill the kmod_thread_locker logic usermodehelper: don't use CLONE_VFORK for ____call_usermodehelper() fs/hfs/catalog.c: fix comparison bug in hfs_cat_keycmp nilfs2: fix the nilfs_iget() vs. nilfs_new_inode() races ...
-
Oleg Nesterov authored
The comments in zap_pid_ns_processes() are not clear, we need to explain how this code actually works. 1. "Ignore SIGCHLD" looks like optimization but it is not, we also need this for correctness. 2. The comment above sys_wait4() could tell more. EXIT_ZOMBIE child is only possible if it has exited before we ignored SIGCHLD. Or if it is traced from the parent namespace, but in this case it will be reaped by debugger after detach, sys_wait4() acts as a synchronization point. 3. The comment about TASK_DEAD (EXIT_DEAD in fact) children is outdated. Contrary to what it says we do not need to make sure they all go away after 0a01f2cc "pidns: Make the pidns proc mount/umount logic obvious". At the same time, we do need to wait for nr_hashed==init_pids, but the reasons are quite different and not obvious: setns(). Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Sterling Alexander <stalexan@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
alloc_pid() does get_pid_ns() beforehand but forgets to put_pid_ns() if it fails because disable_pid_allocation() was called by the exiting child_reaper. We could simply move get_pid_ns() down to successful return, but this fix tries to be as trivial as possible. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Cc: Aaron Tomlin <atomlin@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Sterling Alexander <stalexan@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Oleg Nesterov authored
After the previous change we can add just the exiting EXIT_DEAD task to the "dead" list and remove another release_task(tsk). Signed-off-by:
-
Oleg Nesterov authored
Shift "release dead children" loop from forget_original_parent() to its caller, exit_notify(). It is safe to reap them even if our parent reaps us right after we drop tasklist_lock, those children no longer have any connection to the exiting task. And this allows us to avoid write_lock_irq(tasklist_lock) right after it was released by forget_original_parent(), we can simply call it with tasklist_lock held. While at it, move the comment about forget_original_parent() up to this function. Signed-off-by:
-
Oleg Nesterov authored
Now that pid_ns logic was isolated we can change forget_original_parent() to return right after find_child_reaper() when father->children is empty, there is nothing to reparent in this case. In particular this avoids find_alive_thread() and this can help if the whole process exits and it has a lot of PF_EXITING threads at the start of the thread list, this can easily lead to O(nr_threads ** 2) iterations. Trivial test case (tested under KVM, 2 CPUs): static void *tfunc(void *arg) { pause(); return NULL; } static int child(unsigned int nt) { pthread_t pt; while (nt--) assert(pthread_create(&pt, NULL, tfunc, NULL) == 0); pthread_kill(pt, SIGTRAP); pause(); return 0; } int main(int argc, const char *argv[]) { int stat; unsigned int nf = atoi(argv[1]); unsigned int nt = atoi(argv[2]); while (nf--) { if (!fork()) return child(nt); wait(&stat); assert(stat == SIGTRAP); } return 0; } $ time ./test 16 16536 shows: real user sys - 5m37.628s 0m4.437s 8m5.560s + 0m50.032s 0m7.130s 1m4.927s Signed-off-by: -
Oleg Nesterov authored
Add the new simple helper to factor out the for_each_thread() code in find_child_reaper() and find_new_reaper(). It can also simplify the potential PF_EXITING -> exit_state change, plus perhaps we can change this code to take SIGNAL_GROUP_EXIT into account. Signed-off-by:
-
Oleg Nesterov authored
find_new_reaper() does 2 completely different things. Not only it finds a reaper, it also updates pid_ns->child_reaper or kills the whole namespace if the caller is ->child_reaper. Now that has_child_subreaper logic doesn't depend on child_reaper check we can move that pid_ns code into a separate helper. IMHO this makes the code more clean, and this allows the next changes. Signed-off-by:
-
Oleg Nesterov authored
Swap the "init_task" and same_thread_group() checks. This way it is more simple to document these checks and we can remove the link to the previous discussion on lkml. Signed-off-by:
-
Oleg Nesterov authored
Change find_new_reaper() to use for_each_thread() instead of deprecated while_each_thread(). We do not bother to check "thread != father" in the 1st loop, we can rely on PF_EXITING check. Note: this means the minor behavioural change: for_each_thread() starts from the group leader. But this should be fine, nobody should make any assumption about do_wait(__WNOTHREAD) when it comes to reparented tasks. And this can avoid the pointless reparenting to a short-living thread While zombie leaders are not that common. Signed-off-by:
-
Oleg Nesterov authored
find_new_reaper() assumes that "has_child_subreaper" logic is safe as long as we are not the exiting ->child_reaper and this is doubly wrong: 1. In fact it is safe if "pid_ns->child_reaper == father"; there must be no children after zap_pid_ns_processes() returns, so it doesn't matter what we return in this case and even pid_ns->child_reaper is wrong otherwise: we can't reparent to ->child_reaper == current. This is not a bug, but this is confusing. 2. It is not safe if we are not pid_ns->child_reaper but from the same thread group. We drop tasklist_lock before zap_pid_ns_processes(), so another thread can lock it and choose the new reaper from the upper namespace if has_child_subreaper == T, and this is obviously wrong. This is not that bad, zap_pid_ns_processes() won't return until the the new reaper reaps all zombies, but this should be fixed anyway. We could change for_each_thread() loop to use ->exit_state instead of PF_EXITING which we had to use until 8aac6270, or we could change copy_signal() to check CLONE_NEWPID before setting has_child_subreaper, but lets change this code so that it is clear we can't look outside of our namespace, otherwise same_thread_group(reaper, child_reaper) check will look wrong and confusing anyway. We can simply start from "father" and fix the problem. We can't wrongly return a thread from the same thread group if ->is_child_subreaper == T, we know that all threads have PF_EXITING set. Signed-off-by:
-
Oleg Nesterov authored
The ->has_child_subreaper code in find_new_reaper() finds alive "thread" but returns another "reaper" thread which can be dead. Signed-off-by:
-
Oleg Nesterov authored
proc_flush_task_mnt() always tries to flush task/pid, but this is pointless if we reap the leader. d_invalidate() is recursive, and if nothing else the next d_hash_and_lookup(tgid) should fail anyway. Signed-off-by:
-
Oleg Nesterov authored
Contrary to what the comment in __exit_signal() says we do account the group leader. Fix this and explain why. Signed-off-by:
-
Oleg Nesterov authored
wait_task_zombie() no longer needs tasklist_lock to accumulate the psig->c* counters, we can drop it right after cmpxchg(exit_state). Signed-off-by:
-
Oleg Nesterov authored
1. wait_task_zombie() uses p->real_parent to get psig/siglock. This is correct but needs tasklist_lock, ->real_parent can exit. We can use "current" instead. This is our natural child, its parent must be our sub-thread. 2. Read psig/sig outside of ->siglock, ->signal is no longer protected by this lock. 3. Fix the outdated comments about tasklist_lock. We can not race with __exit_signal(), the whole thread group is dead, nobody but us can call it. Also clarify the usage of ->stats_lock and ->siglock. Note: thread_group_cputime_adjusted() is sub-optimal in this case, we probably want to export cputime_adjust() to avoid thread_group_cputime(). The comment says "all threads" but there are no other threads. Signed-off-by:
-
Oleg Nesterov authored
Now that EXIT_DEAD is the terminal state we can kill "int traced" variable and check "state == EXIT_DEAD" instead to cleanup the code. In particular, this way it is clear that the check obviously doesn't need tasklist_lock. Also fix the type of "unsigned long state", "long" was always wrong although this doesn't matter because cmpxchg/xchg uses typeof(*ptr). [akpm@linux-foundation.org: don't make me google the C Operator Precedence table] Signed-off-by:
-
Oleg Nesterov authored
Now that we do not call kernel_thread(CLONE_VFORK) from the worker thread we can not deadlock if do_execve() in turn triggers another call_usermodehelper(), we can remove the kmod_thread_locker code. Note: we should probably kill khelper_wq and simply use one of the global workqueues, say, system_unbound_wq, this special wq for umh buys nothing nowadays. Signed-off-by:
-
Oleg Nesterov authored
After "kernel/kmod: fix use-after-free of the sub_infostructure" CLONE_VFORK in __call_usermodehelper() buys nothing, we rely on on umh_complete() in ____call_usermodehelper() anyway. Remove it. This also eliminates the unnecessary sleep/wakeup in the likely case, and this allows the next change. While at it, kill the "int wait" locals in ____call_usermodehelper() and __call_usermodehelper(), they can safely use sub_info->wait. Signed-off-by:
-
Rasmus Villemoes authored
Relying on the sign (after casting to int) of the difference of two quantities for comparison is usually wrong. For example, should a-b turn out to be 2^31, the return value of cmp(a,b) is -2^31; but that would also be the return value from cmp(b, a). So a compares less than b and b compares less than a. One can also easily find three values a,b,c such that a compares less than b, b compares less than c, but a does not compare less than c. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Signed-off-by:
-
Ryusuke Konishi authored
Same story as in commit 41080b5a ("nfsd race fixes: ext2") (similar ext2 fix) except that nilfs2 needs to use insert_inode_locked4() instead of insert_inode_locked() and a bug of a check for dead inodes needs to be fixed. If nilfs_iget() is called from nfsd after nilfs_new_inode() calls insert_inode_locked4(), nilfs_iget() will wait for unlock_new_inode() at the end of nilfs_mkdir()/nilfs_create()/etc to unlock the inode. If nilfs_iget() is called before nilfs_new_inode() calls insert_inode_locked4(), it will create an in-core inode and read its data from the on-disk inode. But, nilfs_iget() will find i_nlink equals zero and fail at nilfs_read_inode_common(), which will lead it to call iget_failed() and cleanly fail. However, this sanity check doesn't work as expected for reused on-disk inodes because they leave a non-zero value in i_mode field and it hinders the test of i_nlink. This patch also fixes the issue by removing the test on i_mode that nilfs2 doesn't need. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Markus Elfring authored
The iput() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Andreas Rohner authored
This patch removes filemap_write_and_wait_range() from nilfs_sync_file(), because it triggers a data segment construction by calling nilfs_writepages() with WB_SYNC_ALL. A data segment construction does not remove the inode from the i_dirty list and it does not clear the NILFS_I_DIRTY flag. Therefore nilfs_inode_dirty() still returns true, which leads to an unnecessary duplicate segment construction in nilfs_sync_file(). A call to filemap_write_and_wait_range() is not needed, because NILFS2 does not rely on the generic writeback mechanisms. Instead it implements its own mechanism to collect all dirty pages and write them into segments. It is more efficient to initiate the segment construction directly in nilfs_sync_file() without the detour over filemap_write_and_wait_range(). Additionally the lock of i_mutex is not needed, because all code blocks that are protected by i_mutex are also protected by a NILFS transaction: Function i_mutex nilfs_transaction ------------------------------------------------------ nilfs_ioctl_setflags: yes yes nilfs_fiemap: yes no nilfs_write_begin: yes yes nilfs_write_end: yes yes nilfs_lookup: yes no nilfs_create: yes yes nilfs_link: yes yes nilfs_mknod: yes yes nilfs_symlink: yes yes nilfs_mkdir: yes yes nilfs_unlink: yes yes nilfs_rmdir: yes yes nilfs_rename: yes yes nilfs_setattr: yes yes For nilfs_lookup() i_mutex is held for the parent directory, to protect it from modification. The segment construction does not modify directory inodes, so no lock is needed. nilfs_fiemap() reads the block layout on the disk, by using nilfs_bmap_lookup_contig(). This is already protected by bmap->b_sem. Signed-off-by:
Andreas Rohner <andreas.rohner@gmx.net> Signed-off-by:
-
Xunlei Pang authored
rtc_timer_do_work() only judges -ETIME failure of__rtc_set_alarm(), but doesn't handle other failures like -EIO, -EBUSY, etc. If there is a failure other than -ETIME, the next rtc_timer will stay in the timerqueue. Then later rtc_timers will be enqueued directly because they have a later expires time, so the alarm irq will never be programmed. When such failures happen, this patch will retry __rtc_set_alarm(), if still can't program the alarm time, it will remove current rtc_timer from timerqueue and fetch next one, thus preventing it from affecting other rtc timers. Signed-off-by:
Xunlei Pang <pang.xunlei@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: John Stultz <john.stultz@linaro.org> Cc: Arnd Bergmann <arnd.bergmann@linaro.org> Signed-off-by:
-
Xunlei Pang authored
Currently, ab8500 doesn't set uie_unsupported of rtc_device, while it doesn't support UIE, see ab8500_rtc_set_alarm(). Thus, when going through rtc_update_irq_enable()->rtc_timer_enqueue(), there's a chance it has an alarm timer1 queued before which is going to fired, so this update timer2 will be queued because it isn't the leftmost one, which means rtc_timer_enqueue() will return 0. This will result in two problems: 1) UIE EMUL will not be used. 2) When the alarm timer1 is fired, in rtc_timer_do_work() timer2 will fail to set the alarm time, so this rtc will disfunctional due to timer2 with the earliest expires in the timerqueue. So, rtc drivers must set this flag if they don't support UIE. Signed-off-by:
-
Sanchayan Maity authored
The alarm interrupt handler also reads registers which are part of SNVS and need clocks enabled. However, the resume function is called after IRQ's have been enabled, hence this leads to a abort: Unhandled fault: external abort on non-linefetch (0x1008) at 0x908c604c Internal error: : 1008 [#1] ARM Modules linked in: CPU: 0 PID: 421 Comm: sh Not tainted 3.18.0-rc5-00135-g0689c67-dirty #1592 task: 8e03e800 ti: 8cad8000 task.ti: 8cad8000 PC is at snvs_rtc_irq_handler+0x14/0x74 LR is at handle_irq_event_percpu+0x3c/0x144 Fix this by using the .{suspend/resume}_noirq callbacks instead of .{suspend/resume} . Signed-off-by:Sanchayan Maity <maitysanchayan@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Sanchayan Maity authored
Add clock enable and disable support for the SNVS peripheral, which is required for using the RTC within the SNVS block. The clock is not strictly enforced, as this would break the i.MX devices. The clocking for the i.MX devices seems to be enabled elsewhere and enabling RTC SNVS for Vybrid results in a crash. This patch adds the clock support but also makes it optional so Vybrid platform can use the clock if defined while making sure not to break i.MX. Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
Johan Hovold authored
Drop the vendor-prefix from the "ti,system-power-controller" device-tree property name. It has been agreed to make "system-power-controller" a standard property and to drop the vendor-prefix that is currently used by several drivers. Note that drivers that have used "<vendor>,system-power-controller" in a released kernel will need to support both versions. Signed-off-by:
Johan Hovold <johan@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Arnaud Ebalard authored
As pointed out by Mark, it is generally useful to log the error code when reporting a failure. This patch improves existing calls to dev_err() in ISL12057 driver to also report error code. Signed-off-by:
Arnaud Ebalard <arno@natisbad.org> Suggested-by:
Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Grant Likely <grant.likely@linaro.org> Acked-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by:
-
Arnaud Ebalard authored
As suggested by Uwe, instead of clearing oscillator failure bit unconditionally at driver load, this patch adds proper handling of the flag. The driver now returns -ENODATA when reading time from the device and oscillator failure bit is set. The flag is now cleared only when the a new time value is pushed to the device. Signed-off-by:
-
Arnaud Ebalard authored
The month register of ISL12057 RTC chip includes a century bit which reports overflow of year register from 99 to 0. This bit can also be written, which allows using it to extend the time interval the chip can support from 99 to 199 years. This patch adds support for century overflow bit in tm to regs and regs to tm helpers in ISL12057 driver. This was tested by putting a device 100 years in the future (using a specific kernel due to the inability of userland tools such as date or hwclock to pass year 2038), rebooting on a kernel w/ this patch applied and verifying the device was still 100 years in the future. Signed-off-by:
-
Arnaud Ebalard authored
When Intersil ISL12057 support was added by commit 70e12337 ("rtc: Add support for Intersil ISL12057 I2C RTC chip"), two masks for time registers values imported from the device were either wrong or omitted, leading to additional bits from those registers to impact read values: - mask for hour register value when reading it in AM/PM mode. As AM/PM mode is not the usual mode used by the driver, this error would only have an impact on an externally configured RTC hour later read by the driver. - mask for month value. The lack of masking would provide an erroneous value if century bit is set. This patch fixes those two masks. Fixes: 70e12337 ("rtc: Add support for Intersil ISL12057 I2C RTC chip") Signed-off-by:
-
Tomas Novotny authored
Signed-off-by:
Tomas Novotny <tomas@novotny.cz> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Tomas Novotny authored
MCP7940x is same RTC as MCP7941x. The difference is that MCP7941x chips contain additional EEPROM on a different i2c address. DS1307 driver already supports MCP7941x, so just add a new i2c device id and rename functions and defines accordingly. Signed-off-by:
-
Søren Andersen authored
Add support for the watchdog functionality of the DS1374 rtc. Based on the m41t80 watchdog functionality Note: watchdog uses the same registers as alarm. [akpm@linux-foundation.org: don't forget mutex_unlock() in ds1374_wdt_open() error path] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Soeren Andersen <san@rosetechnology.dk> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
