- 07 Nov, 2019 20 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahamees says: ==================== Mellanox, mlx5 fixes 2019-11-06 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. No -stable this time. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Functions like phy_modify_paged() read the current page, on Realtek PHY's this means reading the value of register 0x1f. Add special handling for reading this register, similar to what we do already in r8168g_mdio_write(). Currently we read a random value that by chance seems to be 0 always. Fixes: a2928d28 ("r8169: use paged versions of phylib MDIO access functions") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Fixes for -net Misc fixes for stmmac. Patch 1/11 and 2/11, use the correct variable type for bitrev32() calls. Patch 3/11, fixes the random failures the we were seing when running selftests. Patch 4/11, prevents a crash that can occur when receiving AVB packets and with SPH feature enabled on XGMAC. Patch 5/11, fixes the correct settings for CBS on XGMAC. Patch 6/11, corrects the interpretation of AVB feature on XGMAC. Patch 7/11, disables Flow Control for AVB enabled queues on XGMAC. Patch 8/11, disables MMC interrupts on XGMAC, preventing a storm of interrupts. Patch 9/11, fixes the number of packets that were being taken into account in the RX path cleaning function. Patch 10/11, fixes an incorrect descriptor setting that could cause IP misbehavior. Patch 11/11, fixes the IOC generation mechanism when multiple descriptors are used. ==================== Signed-off-by: -
Jose Abreu authored
IOC bit must be only set in the last descriptor. Move the logic up a little bit to make sure it's set in the correct descriptor. Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Jose Abreu authored
When using addressing > 32 bits the TSO first descriptor only has the header so we can't set the payload field for this descriptor. Let's reset the variable so that buffer 2 value is zero. Fixes: a993db88 ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC") Signed-off-by:
-
Jose Abreu authored
Currently, stmmac_rx() is counting the number of descriptors but it should count the number of packets as specified by the NAPI limit. Fix this. Fixes: ec222003 ("net: stmmac: Prepare to add Split Header support") Signed-off-by:
-
Jose Abreu authored
MMC interrupts were being enabled, which is not what we want because it will lead to a storm of interrupts that are not handled at all. Fix it by disabling all MMC interrupts for XGMAC. Fixes: b6cdf09f ("net: stmmac: xgmac: Implement MMC counters") Signed-off-by:
-
Jose Abreu authored
When in AVB mode we need to disable flow control to prevent MAC from pausing in TX side. Fixes: ec6ea8e3 ("net: stmmac: Add CBS support in XGMAC2") Signed-off-by:
-
Jose Abreu authored
Fix incorrect precedence of operators. For reference: AV implies AV Feature but RAV implies only RX side AV Feature. As we want full AV features we need to check RAV. Fixes: c2b69474 ("net: stmmac: xgmac: Correct RAVSEL field interpretation") Signed-off-by:
-
Jose Abreu authored
When we change between Transmission Scheduling Algorithms, we need to clear previous values so that the new chosen algorithm is correctly selected. Fixes: ec6ea8e3 ("net: stmmac: Add CBS support in XGMAC2") Signed-off-by:
-
Jose Abreu authored
Split Header length is only available when L34T == 0. Fix this by correctly checking if L34T is zero before trying to get Header length. Fixes: 67afd6d1 ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by:
-
Jose Abreu authored
In L2 tests that filter packets by destination MAC address we need to prevent false positives that can occur if we add an address that collides with the existing ones. To fix this, lets manually check if the new address to be added is already present in the NIC and use a different one if so. For Hash filtering this also envolves converting the address to the hash. Fixes: 091810db ("net: stmmac: Introduce selftests support") Signed-off-by:
-
Jose Abreu authored
The bitrev32 function returns an u32 var, not an int. Fix it. Fixes: 0efedbf1 ("net: stmmac: xgmac: Fix XGMAC selftests") Signed-off-by:
-
Jose Abreu authored
The bitrev32 function returns an u32 var, not an int. Fix it. Fixes: 477286b5 ("stmmac: add GMAC4 core support") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing register size validation in bitwise and cmp offloads. 2) Fix error code in ip_set_sockfn_get() when copy_to_user() fails, from Dan Carpenter. 3) Oneliner to copy MAC address in IPv6 hash:ip,mac sets, from Stefano Brivio. 4) Missing policy validation in ipset with NL_VALIDATE_STRICT, from Jozsef Kadlecsik. 5) Fix unaligned access to private data area of nf_tables instructions, from Lukas Wunner. 6) Relax check for object updates, reported as a regression by Eric Garver, patch from Fernando Fernandez Mancera. 7) Crash on ebtables dnat extension when used from the output path. From Florian Westphal. 8) Fix bogus EOPNOTSUPP when updating basechain flags. 9) Fix bogus EBUSY when updating a basechain that is already offloaded. ==================== Signed-off-by: -
Ursula Braun authored
If a pnet table entry is to be added mentioning a valid ethernet interface, but an invalid infiniband or ISM device, the dev_put() operation for the ethernet interface is called twice, resulting in a negative refcount for the ethernet interface, which disables removal of such a network interface. This patch removes one of the dev_put() calls. Fixes: 890a2cb4 ("net/smc: rework pnet table") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== net/tls: add a TX lock Some time ago Pooja and Mallesham started reporting crashes with an async accelerator. After trying to poke the existing logic into shape I came to the conclusion that it can't be trusted, and to preserve our sanity we should just add a lock around the TX side. First patch removes the sk_write_pending checks from the write space callbacks. Those don't seem to have a logical justification. Patch 2 adds the TX lock and patch 3 associated test (which should hang with current net). Mallesham reports that even with these fixes applied the async accelerator workload still occasionally hangs waiting for socket memory. I suspect that's strictly related to the way async crypto is integrated in TLS, so I think we should get these into net or net-next and move from there. ==================== Signed-off-by: -
Jakub Kicinski authored
Add a test which spawns 16 threads and performs concurrent send and recv calls on the same socket. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
TLS TX needs to release and re-acquire the socket lock if send buffer fills up. TLS SW TX path currently depends on only allowing one thread to enter the function by the abuse of sk_write_pending. If another writer is already waiting for memory no new ones are allowed in. This has two problems: - writers don't wake other threads up when they leave the kernel; meaning that this scheme works for single extra thread (second application thread or delayed work) because memory becoming available will send a wake up request, but as Mallesham and Pooja report with larger number of threads it leads to threads being put to sleep indefinitely; - the delayed work does not get _scheduled_ but it may _run_ when other writers are present leading to crashes as writers don't expect state to change under their feet (same records get pushed and freed multiple times); it's hard to reliably bail from the work, however, because the mere presence of a writer does not guarantee that the writer will push pending records before exiting. Ensuring wakeups always happen will make the code basically open code a mutex. Just use a mutex. The TLS HW TX path does not have any locking (not even the sk_write_pending hack), yet it uses a per-socket sg_tx_data array to push records. Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Reported-by:
Mallesham Jatharakonda <mallesh537@gmail.com> Reported-by:
Pooja Trivedi <poojatrivedi@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
sk_write_pending being not zero does not guarantee that partial record will be pushed. If the thread waiting for memory times out the pending record may get stuck. In case of tls_device there is no path where parial record is set and writer present in the first place. Partial record is set only in tls_push_sg() and tls_push_sg() will return an error immediately. All tls_device callers of tls_push_sg() will return (and not wait for memory) if it failed. Fixes: a42055e8 ("net/tls: Add support for async encryption of records for performance") Signed-off-by:
-
- 06 Nov, 2019 20 commits
-
-
Vladimir Oltean authored
The "read-modify-write register index" function is declared with a confusing prototype: the "mask" and "reg" arguments are swapped. Fortunately, this does not affect callers so far. Both arguments are u32, and the wrapper macros (ocelot_rmw_ix etc) have the arguments in the correct order (the one from ocelot_io.c). Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Bonding fixes for Ocelot switch This series fixes 2 issues with bonding in a system that integrates the ocelot driver, but the ports that are bonded do not actually belong to ocelot. ==================== Signed-off-by: -
Claudiu Manoil authored
lag_upper_info may be NULL on slave removal. Fixes: dc96ee37 ("net: mscc: ocelot: add bonding support") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by:
-
Claudiu Manoil authored
The check that the event is actually for this device should be moved from the "port" handler to the net device handler. Otherwise the port handler will deny bonding configuration for other net devices in the same system (like enetc in the LS1028A) that don't have the lag_upper_info->tx_type restriction that ocelot has. Fixes: dc96ee37 ("net: mscc: ocelot: add bonding support") Signed-off-by:
-
Dmytro Linkin authored
For vlan push action, if eswitch flow source capability is enabled, flow source value compared with MLX5_VPORT_UPLINK enum, to determine uplink port. This lead to syndrome in dmesg if try to add vlan push action. For example: $ tc filter add dev vxlan0 ingress protocol ip prio 1 flower \ enc_dst_port 4789 \ action tunnel_key unset pipe \ action vlan push id 20 pipe \ action mirred egress redirect dev ens1f0_0 $ dmesg ... [ 2456.883693] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 5273): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xa9c090) Use the correct enum value MLX5_FLOW_CONTEXT_FLOW_SOURCE_UPLINK. Fixes: bb204dcf39fe ("net/mlx5e: Determine source port properly for vlan push action") Signed-off-by:Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Alex Vesker authored
During rule creation hw_ste_arr was not freed. Fixes: 41d07074 ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Alex Vesker authored
The rewrite data was no freed. Fixes: 9db810ed ("net/mlx5: DR, Expose steering action functionality") Signed-off-by:
-
Roi Dayan authored
The value is already the calculation so remove the log prefix. Fixes: e52c2802 ("net/mlx5: E-Switch, Add chains and priorities") Signed-off-by:
Eli Britstein <elibr@mellanox.com> Signed-off-by:
-
David S. Miller authored
Doug Berger says: ==================== net: bcmgenet: restore internal EPHY support (part 2) This is a follow up to my previous submission (see [1]). The first commit provides what is intended to be a complete solution for the issues that can result from insufficient clocking of the MAC during reset of its state machines. It should be backported to the stable releases. It is intended to replace the partial solution of commit 1f515486 ("net: bcmgenet: soft reset 40nm EPHYs before MAC init") which is reverted by the second commit of this series and should not be back- ported as noted in [2]. The third commit corrects a timing hazard with a polled PHY that can occur when the MAC resumes and also when a v3 internal EPHY is reset by the change in commit 25382b99 ("net: bcmgenet: reset 40nm EPHY on energy detect"). It is expected that commit 25382b99 be back- ported to stable first before backporting this commit. [1] https://lkml.org/lkml/2019/10/16/1706 [2] https://lkml.org/lkml/2019/10/31/749 ==================== Signed-off-by:
-
Doug Berger authored
The phy_init_hw() function may reset the PHY to a configuration that does not match manual network settings stored in the phydev structure. If the phy state machine is polled rather than event driven this can create a timing hazard where the phy state machine might alter the settings stored in the phydev structure from the value read from the BMCR. This commit follows invocations of phy_init_hw() by the bcmgenet driver with invocations of the genphy_config_aneg() function to ensure that the BMCR is written to match the settings held in the phydev structure. This prevents the risk of manual settings being accidentally altered. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Doug Berger authored
This reverts commit 1f515486. This commit improved the chances of the umac resetting cleanly by ensuring that the PHY was restored to its normal operation prior to resetting the umac. However, there were still cases when the PHY might not be driving a Tx clock to the umac during this window (e.g. when the PHY detects no link). The previous commit now ensures that the unimac receives clocks from the MAC during its reset window so this commit is no longer needed. This commit also has an unintended negative impact on the MDIO performance of the UniMAC MDIO interface because it is used before the MDIO interrupts are reenabled, so it should be removed. Signed-off-by:
-
Doug Berger authored
As noted in commit 28c2d1a7 ("net: bcmgenet: enable loopback during UniMAC sw_reset") the UniMAC must be clocked while sw_reset is asserted for its state machines to reset cleanly. The transmit and receive clocks used by the UniMAC are derived from the signals used on its PHY interface. The bcmgenet MAC can be configured to work with different PHY interfaces including MII, GMII, RGMII, and Reverse MII on internal and external interfaces. Unfortunately for the UniMAC, when configured for MII the Tx clock is always driven from the PHY which places it outside of the direct control of the MAC. The earlier commit enabled a local loopback mode within the UniMAC so that the receive clock would be derived from the transmit clock which addressed the observed issue with an external GPHY disabling it's Rx clock. However, when a Tx clock is not available this loopback is insufficient. This commit implements a workaround that leverages the fact that the MAC can reliably generate all of its necessary clocking by enterring the external GPHY RGMII interface mode with the UniMAC in local loopback during the sw_reset interval. Unfortunately, this has the undesirable side efect of the RGMII GTXCLK signal being driven during the same window. In most configurations this is a benign side effect as the signal is either not routed to a pin or is already expected to drive the pin. The one exception is when an external MII PHY is expected to drive the same pin with its TX_CLK output creating output driver contention. This commit exploits the IEEE 802.3 clause 22 standard defined isolate mode to force an external MII PHY to present a high impedance on its TX_CLK output during the window to prevent any contention at the pin. The MII interface is used internally with the 40nm internal EPHY which agressively disables its clocks for power savings leading to incomplete resets of the UniMAC and many instabilities observed over the years. The workaround of this commit is expected to put an end to those problems. Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
-
Tariq Toukan authored
Add TLS TX counter description for the handshake retransmitted packets that triggers the resync procedure then skip it, going into the regular transmit flow. Fixes: 46a3ea98 ("net/mlx5e: kTLS, Enhance TX resync flow") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Pan Bian authored
The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is incorrect, which may result in a system crash or other security impacts. The expected object to free is *fw_vsc_cfg. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
-
Eric Dumazet authored
Add a couple of READ_ONCE() and WRITE_ONCE() to prevent load-tearing and store-tearing in sock_read_timestamp() and sock_write_timestamp() This might prevent another KCSAN report. Fixes: 3a0ed3e9 ("sock: Make sock->sk_stamp thread-safe") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Deepa Dinamani <deepa.kernel@gmail.com> Acked-by:
Deepa Dinamani <deepa.kernel@gmail.com> Signed-off-by:
-
Sean Tranchetti authored
During the exit/unregistration process of the RmNet driver, the function rmnet_unregister_real_device() is called to handle freeing the driver's internal state and removing the RX handler on the underlying physical device. However, the order of operations this function performs is wrong and can lead to a use after free of the rmnet_port structure. Before calling netdev_rx_handler_unregister(), this port structure is freed with kfree(). If packets are received on any RmNet devices before synchronize_net() completes, they will attempt to use this already-freed port structure when processing the packet. As such, before cleaning up any other internal state, the RX handler must be unregistered in order to guarantee that no further packets will arrive on the device. Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Jakub Kicinski authored
sk_msg_trim() tries to only update curr pointer if it falls into the trimmed region. The logic, however, does not take into the account pointer wrapping that sk_msg_iter_var_prev() does nor (as John points out) the fact that msg->sg is a ring buffer. This means that when the message was trimmed completely, the new curr pointer would have the value of MAX_MSG_FRAGS - 1, which is neither smaller than any other value, nor would it actually be correct. Special case the trimming to 0 length a little bit and rework the comparison between curr and end to take into account wrapping. This bug caused the TLS code to not copy all of the message, if zero copy filled in fewer sg entries than memcopy would need. Big thanks to Alexander Potapenko for the non-KMSAN reproducer. v2: - take into account that msg->sg is a ring buffer (John). Link: https://lore.kernel.org/netdev/20191030160542.30295-1-jakub.kicinski@netronome.com/ (v1) Fixes: d829e9c4 ("tls: convert to generic sk_msg interface") Reported-by: syzbot+f8495bff23a879a6d0bd@syzkaller.appspotmail.com Reported-by: syzbot+6f50c99e8f6194bf363f@syzkaller.appspotmail.com Co-developed-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Dotan Barak authored
The reason for the pre-allocation of one CQE is to enable resizing of the CQ. Fix comment accordingly. Signed-off-by:
Dotan Barak <dotanb@dev.mellanox.co.il> Signed-off-by:
Eli Cohen <eli@mellanox.co.il> Signed-off-by:
Vladimir Sokolovsky <vlad@mellanox.com> Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
-
Florian Fainelli authored
With the DSA core doing the call to dsa_port_disable() we do not need to do that within the driver itself. This could cause an use after free since past dsa_unregister_switch() we should not be accessing any dsa_switch internal structures. Fixes: 0394a63a ("net: dsa: enable and disable all ports") Signed-off-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
John Hurley authored
When a new filter is added to cls_api, the function tcf_chain_tp_insert_unique() looks up the protocol/priority/chain to determine if the tcf_proto is duplicated in the chain's hashtable. It then creates a new entry or continues with an existing one. In cls_flower, this allows the function fl_ht_insert_unque to determine if a filter is a duplicate and reject appropriately, meaning that the duplicate will not be passed to drivers via the offload hooks. However, when a tcf_proto is destroyed it is removed from its chain before a hardware remove hook is hit. This can lead to a race whereby the driver has not received the remove message but duplicate flows can be accepted. This, in turn, can lead to the offload driver receiving incorrect duplicate flows and out of order add/delete messages. Prevent duplicates by utilising an approach suggested by Vlad Buslov. A hash table per block stores each unique chain/protocol/prio being destroyed. This entry is only removed when the full destroy (and hardware offload) has completed. If a new flow is being added with the same identiers as a tc_proto being detroyed, then the add request is replayed until the destroy is complete. Fixes: 8b64678e ("net: sched: refactor tp insert/delete for concurrent execution") Signed-off-by:
John Hurley <john.hurley@netronome.com> Signed-off-by:
Louis Peens <louis.peens@netronome.com> Signed-off-by:
-
