- 27 Jun, 2016 1 commit
-
-
Frank Binns authored
Signed-off-by:
Frank Binns <frank.binns@imgtec.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466763337-27428-1-git-send-email-frank.binns@imgtec.com
-
- 24 Jun, 2016 20 commits
-
-
Lukas Wunner authored
Use shiny new drm_crtc_force_disable() instead of open coding the same. No functional change intended. Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/95bfab0175ea327f777d43dcc18034bf42ca2287.1465392124.git.lukas@wunner.de
-
Lukas Wunner authored
Use shiny new drm_crtc_force_disable() instead of open coding the same. No functional change intended. Cc: Francisco Jerez <currojerez@riseup.net> Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Signed-off-by:
-
Lukas Wunner authored
Use shiny new drm_crtc_force_disable() instead of open coding the same. No functional change intended. Signed-off-by:
-
Lukas Wunner authored
amdgpu leaks a runtime pm ref if at least one CRTC is enabled on unload. The ref is taken by amdgpu_crtc_set_config() and held as long as a CRTC is in use. Fix by turning off all CRTCs on unload. Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lukas Wunner authored
radeon leaks a runtime pm ref if at least one CRTC is enabled on unload. The ref is taken by radeon_crtc_set_config() and held as long as a CRTC is in use. Fix by turning off all CRTCs on unload. Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lukas Wunner authored
nouveau leaks a runtime pm ref if at least one CRTC is enabled on unload. The ref is taken by nouveau_crtc_set_config() and held as long as a CRTC is in use. nv04_display_destroy() should solve this by turning off all CRTCs, but (1) nv50_display_destroy() doesn't do the same and (2) it's broken since commit d6bf2f37 ("drm/nouveau: run mode_config destructor before destroying internal display state") because the crtc structs are torn down by drm_mode_config_cleanup() before being turned off. Also, there's no locking. Move the code to turn off all CRTCs from nv04_display_destroy() to nouveau_display_destroy() so that it's called for both nv04 and nv50 and before drm_mode_config_cleanup(). Use drm_crtc_force_disable_all() helper to save on code and have proper locking. Cc: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Lukas Wunner authored
Turning off a single CRTC or all active CRTCs of a DRM device is a fairly common pattern. Add helpers to avoid open coding this everywhere. The name was chosen to be consistent with drm_plane_force_disable(). Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Lukas Wunner authored
The PCI core calls pm_runtime_forbid() on device probe in pci_pm_init(), making this the default state when amdgpu is loaded. amdgpu_driver_load_kms() therefore calls pm_runtime_allow(), but there's no pm_runtime_forbid() in amdgpu_driver_unload_kms() to balance it. Add it so that we leave the device in the same state that we found it. This isn't a bug, it's just good housekeeping. When amdgpu is first loaded with runpm=1, then unloaded and loaded again with runpm=0, pm_runtime_forbid() will be called from amdgpu_pmops_runtime_idle() or amdgpu_pmops_runtime_suspend(), so the behaviour is correct. If there ever is a third party driver for AMD cards, this commit avoids that it has to clean up behind amdgpu. Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lukas Wunner authored
If an error occurs in amdgpu_device_init() after adev->rmmio has been set, its caller amdgpu_driver_load_kms() will skip runtime pm initialization and call amdgpu_driver_unload_kms(), which acquires a runtime pm ref that is leaked. Balance by releasing a runtime pm ref in the error path of amdgpu_driver_load_kms(). Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)") Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lukas Wunner authored
amdgpu_driver_load_kms() calls pm_runtime_put_autosuspend() if amdgpu_device_is_px(dev), but amdgpu_driver_unload_kms() calls pm_runtime_get_sync() unconditionally. We therefore leak a runtime pm ref whenever amdgpu is unloaded on a non-PX machine or if runpm=0. The GPU will subsequently never runtime suspend after loading amdgpu again. Fix by taking the runtime pm ref under the same condition that it was released on driver load. Fixes: d38ceaf9 ("drm/amdgpu: add core driver (v4)") Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lukas Wunner authored
The PCI core calls pm_runtime_forbid() on device probe in pci_pm_init(), making this the default state when radeon is loaded. radeon_driver_load_kms() therefore calls pm_runtime_allow(), but there's no pm_runtime_forbid() in radeon_driver_unload_kms() to balance it. Add it so that we leave the device in the same state that we found it. This isn't a bug, it's just good housekeeping. When radeon is first loaded with runpm=1, then unloaded and loaded again with runpm=0, pm_runtime_forbid() will be called from radeon_pmops_runtime_idle() or radeon_pmops_runtime_suspend(), so the behaviour is correct. If there ever is a third party driver for AMD cards, this commit avoids that it has to clean up behind radeon. Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lukas Wunner authored
radeon_device_init() returns an error if either of the two calls to radeon_init() fail. One level up in the call stack, radeon_driver_load_kms() will then skip runtime pm initialization and call radeon_driver_unload_kms(), which acquires a runtime pm ref that is leaked. Balance by releasing a runtime pm ref in the error path of radeon_device_init(). Fixes: 10ebc0bc ("drm/radeon: add runtime PM support (v2)") Cc: Dave Airlie <airlied@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lukas Wunner authored
radeon_driver_load_kms() calls pm_runtime_put_autosuspend() if radeon_is_px(dev), but radeon_driver_unload_kms() calls pm_runtime_get_sync() unconditionally. We therefore leak a runtime pm ref whenever radeon is unloaded on a non-PX machine or if runpm=0. The GPU will subsequently never runtime suspend after loading radeon again. Fix by taking the runtime pm ref under the same condition that it was released on driver load. Fixes: 10ebc0bc ("drm/radeon: add runtime PM support (v2)") Cc: Dave Airlie <airlied@redhat.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lukas Wunner authored
The PCI core calls pm_runtime_forbid() on device probe in pci_pm_init(), making this the default state when nouveau is loaded. nouveau_drm_load() therefore calls pm_runtime_allow(), but there's no pm_runtime_forbid() in nouveau_drm_unload() to balance it. Add it so that we leave the device in the same state that we found it. This isn't a bug, it's just good housekeeping. When nouveau is first loaded with runpm=1, then unloaded and loaded again with runpm=0, pm_runtime_forbid() will be called from nouveau_pmops_runtime_idle() or nouveau_pmops_runtime_suspend(), so the behaviour is correct. The nvidia blob doesn't use runtime pm, but if it ever does, this commit avoids that it has to clean up behind nouveau. Cc: Ben Skeggs <bskeggs@redhat.com> Tested-by:
Karol Herbst <karolherbst@gmail.com> Tested-by:
Peter Wu <peter@lekensteyn.nl> Signed-off-by:
-
Lukas Wunner authored
nouveau_drm_load() calls pm_runtime_put() if nouveau_runtime_pm != 0, but nouveau_drm_unload() calls pm_runtime_get_sync() unconditionally. We therefore leak a runtime pm ref whenever nouveau is loaded with runpm=0 and then unloaded. The GPU will subsequently never runtime suspend even if nouveau is loaded again with runpm=1. Fix by taking the runtime pm ref under the same condition that it was released on driver load. Fixes: 5addcf0a ("nouveau: add runtime PM support (v0.9)") Cc: Dave Airlie <airlied@redhat.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reported-by:
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
MT8173 HDMI support - device tree binding documentation for MT8173 HDMI encoder, CEC, DDC, and PHY - drivers for MT8173 HDMI encoder, CEC (HPD only for now), DDC, and PHY - enable HDMI output via a custom SMCCC call - add ddc-i2c-bus property to HDMI connector device tree binding * tag 'mediatek-drm-2016-06-20' of git://git.pengutronix.de/git/pza/linux: dt-bindings: hdmi-connector: add DDC I2C bus phandle documentation drm/mediatek: enable hdmi output control bit drm/mediatek: Add HDMI support dt-bindings: drm/mediatek: Add Mediatek HDMI dts binding
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
some rcar-du fixes. * 'drm/next/du' of git://linuxtv.org/pinchartl/media: drm: rcar-du: error message is not needed for EPROBE_DEFER drm: rcar-du: error message is not needed for drm_vblank_init() rcar-du: add/rename DEFR6 TCON bits
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
- Infrastructure for GVT-g (paravirtualized gpu on gen8+), from Zhi Wang - another attemp at nonblocking atomic plane updates - bugfixes and refactoring for GuC doorbell code (Dave Gordon) - GuC command submission enabled by default, if fw available (Dave Gordon) - more bxt w/a (Arun Siluvery) - bxt phy improvements (Imre Deak) - prep work for stolen objects support (Ankitprasa Sharma & Chris Wilson) - skl/bkl w/a update from Mika Kuoppala - bunch of small improvements and fixes all over, as usual * tag 'drm-intel-next-2016-06-20' of git://anongit.freedesktop.org/drm-intel: (81 commits) drm/i915: Update DRIVER_DATE to 20160620 drm/i915: Introduce GVT context creation API drm/i915: Support LRC context single submission drm/i915: Introduce execlist context status change notification drm/i915: Make addressing mode bits in context descriptor configurable drm/i915: Make ring buffer size of a LRC context configurable drm/i915: gvt: Introduce the basic architecture of GVT-g drm/i915: Fold vGPU active check into inner functions drm/i915: Use offsetof() to calculate the offset of members in PVINFO page drm/i915: Factor out i915_pvinfo.h drm/i915: Serialise presentation with imported dmabufs drm/i915: Use atomic commits for legacy page_flips drm/i915: Move fb_bits updating later in atomic_commit drm/i915: nonblocking commit Reapply "drm/i915: Pass atomic states to fbc update, functions." drm/i915: Roll out the helper nonblock tracking drm/i915: Signal drm events for atomic drm/i915/ilk: Don't disable SSC source if it's in use drm/i915/guc: (re)initialise doorbell h/w when enabling GuC submission drm/i915/guc: replace assign_doorbell() with select_doorbell_register() ...
-
Dave Airlie authored
Merge tag 'topic/drm-misc-2016-06-22-updated' of git://anongit.freedesktop.org/drm-intel into drm-next Again a pile of things all over - Conversion to rst from docbook from Jani. Looks real pretty, and the source is now actually readable (compared to horrible, horrible docbook xml)! https://01.org/linuxgraphics/gfx-docs/drm/ - device register/unregister rework from Chris, with follow-up work from Benjamin. Allows more drivers to demidlayer load/unload and others to remove a bit of boilerplate. - master/auth related cleanup, with docs - some dma-buf polish, merged by Sumit - small stuff all over (like build fixes from Arnd) Group maintainership seems to slowly take off, with both Thierry and Sumit pushing a few things. No hiccups thus far. * tag 'topic/drm-misc-2016-06-22-updated' of git://anongit.freedesktop.org/drm-intel: (68 commits) drm/vc4: Remove unused connector drm/fb-helper: Reduce READ_ONCE(master) to lockless_dereference drm/sun4i: Remove open-coded drm_connector_register_all() drm/vc4: Remove open-coded drm_connector_register_all() drm/atmel-hlcdc: Remove redundant call to drm_connector_unregister_all() drm: document drm_auth.c drm: Clear up master tracking booleans drm: Extract drm_is_current_master drm: Refactor drop/set master code a bit drm: Lobotomize set_busid nonsense for !pci drivers drm: Nuke SET_UNIQUE ioctl drm: Don't call drm_dev_set_unique from platform drivers drm/vgem: Stop calling drm_drv_set_unique drm: Use dev->name as fallback for dev->unique drm: Clean up drm_crtc.h drm: Move master pointer from drm_minor to drm_device drm: sti: rework init sequence drm: sti: use late_register and early_unregister callbacks drm/amdkfd: Clean up inline handling drm: Add callbacks for late registering ...
-
Dave Airlie authored
Add basic support for the sii902x RGB -> HDMI bridge. * tag 'drm-sii902x' of github.com:bbrezillon/linux-at91: drm/bridge: Add sii902x DT bindings doc drm/bridge: Add sii902x driver
-
- 22 Jun, 2016 5 commits
-
-
Daniel Vetter authored
Somehow I didn't spot this when pushing :( Fixes: 398e9799 ("drm/vc4: Remove open-coded drm_connector_register_all()") Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Chris Wilson authored
We are only documenting that the read is outside of the lock, and do not require strict ordering on the operation. In this case the more relaxed lockless_dereference() will suffice. Signed-off-by:
-
Chris Wilson authored
drm_dev_register() will now register all known connectors, so we no longer have to do so manually. Signed-off-by:
-
Chris Wilson authored
drm_dev_register() will now register all known connectors, so we no longer have to do so manually. Signed-off-by:
-
Chris Wilson authored
drm_connector_unregister_all() is not automatically called by drm_dev_unregister() so we can drop the local call. Signed-off-by:
-
- 21 Jun, 2016 14 commits
-
-
Daniel Vetter authored
Also extract drm_auth.h for nicer grouping. v2: Nuke the other comments since they don't really explain a lot, and within the drm core we generally only document functions exported to drivers: The main audience for these docs are driver writers. v3: Limit the exposure of drm_master internals by only including drm_auth.h where it is neede (Chris). v4: Spelling polish (Emil). Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Daniel Vetter authored
- is_master can be removed, we can compute this by checking allowed_master (which really just tracks whether a master struct has been allocated for this fpriv in either open or set_master), and whether the fpriv is the current master on the device. - that frees up is_master as a good replacement name for allowed_master. With that it's clear that it tracks whether the fpriv is a master (with possibly clients attached to it and authenticated against it), and that one of those fprivs with is_master set is the current master. v2: Fix kerneldoc for is_master (Emil). Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
Daniel Vetter authored
Just rolling out a bit of abstraction to be able to clean up the master logic in the next step. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
Daniel Vetter authored
File open/set_maseter ioctl and file close/drop_master ioctl share the same master handling code. Extract it. Note that vmwgfx's master_set callback needs to know whether the master is a new one or has been used already, so thread this through. On the close/drop side a similar parameter existed, but wasnt used. Drop it to simplify the flow. v2: Try to make it not leak so much (Emil). v3: Send out the right version ... Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
-
Daniel Vetter authored
We already have a fallback in place to fill out the unique from dev->unique, which is set to something reasonable in drm_dev_alloc. Which means we only need to have a special set_busid for pci devices, to be able to care the backwards compat code for drm 1.1 around, which libdrm still needs. While developing and testing this patch things blew up in really interesting ways, and the code is rather confusing in naming things between the kernel code, ioctl #defines and libdrm. For the next brave dragon slayer, document all this madness properly in the userspace interface section of gpu.tmpl. v2: Make drm_dev_set_unique static and update kerneldoc. v3: Entire rewrite, plus document what's going on for posterity in the gpu docbook uapi section. v4: Drop accidental amdgpu hunk (Emil). v5: Drop accidental omapdrm vblank counter change (Emil). v6: Rebase on top of the sphinx conversion. Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Emil Velikov <emil.l.velikov@gmail.com> Tested-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> (virt_gpu) Reviewed-by:
-
Daniel Vetter authored
Ever since commit 2e1868b560315a8b20d688e646c489a5ad93eeae Author: Eric Anholt <anholt@freebsd.org> Date: Wed Jun 16 09:25:21 2004 +0000 DRI trunk-20040613 import the X server supports drm 1.1, thus doesn't call call libdrm's drmSetBusid - the sole user of this ioctl. When reviewing this note that for hilarity both the kernel-internal functions (set_busid) and the libdrm wrapper (drmSetBusid) have names not matching this ioctl (SET_UNIQUE). v2: Polish commit message (Emil). Cc: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by: -
Daniel Vetter authored
Since commit e112e593 Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Date: Fri Dec 11 11:20:28 2015 +0100 drm: use dev_name as default unique name in drm_dev_alloc() we're using a reasonable default which should work for everyone. Only mtk, rcar-du and sun4i are affected, and as kms-only drivers without any rendering support no one should ever care about the unique name v2: Rebase on top of mediatek. Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Emil Velikov <emil.l.velikov@gmail.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Daniel Vetter authored
With the previous patch this is now redudant, the core always sets a reasonable dev->unique string. Cc: Sean Paul <seanpaul@chromium.org> Reviewed-by:
-
Daniel Vetter authored
Lots of arm drivers get this wrong and for most arm boards this is the right thing actually. And anyway with most loaders you want to chase sysfs links anyway to figure out which dri device you want. This will fix dmesg noise for rockchip and sti. Also add a fallback to driver->name for entirely virtual drivers like vgem. v2: Rebase on top of commit e112e593 Author: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Date: Fri Dec 11 11:20:28 2015 +0100 drm: use dev_name as default unique name in drm_dev_alloc() and simplify a bit. Plus add a comment. v3: WARN_ON(!dev->unique) as discussed with Emil. Cc: Ilia Mirkin <imirkin@alum.mit.edu> Reported-by:
Ilia Mirkin <imirkin@alum.mit.edu> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Reviewed-by:
-
Daniel Vetter authored
- Group declarations for separate files (drm_bridge.c, drm_edid.c) - Move declarations only used within drm.ko to drm_crtc_internal.h - drm_property_type_valid to drm_crtc.c, its only callsite Reviewed-by:
-
Daniel Vetter authored
There can only be one current master, and it's for the overall device. Render/control minors don't support master-based auth at all. This simplifies the master logic a lot, at least in my eyes: All these additional pointer chases are just confusing. While doing the conversion I spotted some locking fail: - drm_lock/drm_auth check dev->master without holding the master_mutex. This is fallout from commit c996fd0b Author: Thomas Hellstrom <thellstrom@vmware.com> Date: Tue Feb 25 19:57:44 2014 +0100 drm: Protect the master management with a drm_device::master_mutex v3 but I honestly don't care one bit about those old legacy drivers using this. - debugfs name info should just grab master_mutex. - And the fbdev helper looked at it to figure out whether someone is using KMS. We just need a consistent value, so READ_ONCE. Aside: We should probably check if anyone has opened a control node too, but I guess current userspace doesn't really do that yet. v2: Balance locking, reported by Julia. v3: Rebase on top of Chris' oops fixes. Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v2) Signed-off-by:
-
Benjamin Gaignard authored
Use drm_dev_alloc() and drm_dev_register() instead of .load() To simplify init sequence only create fbdev when requested in output_poll_changed(). version 2: remove call to drm_connector_unregister_all() and drm_dev_set_unique() Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
Benjamin Gaignard authored
Make sti driver use register callback to move debugfs initialization out of sub-components creation. This will allow to convert driver .load() to drm_dev_alloc() and drm_dev_register(). sti_compositor bring up 2 crtc but only one debugfs init is needed so use drm_crtc_index to do it on the first one. This can't be done in sti_drv because only sti_compositor have access to the devices. It is almost the same for sti_encoder which handle multiple encoder while one only debugfs entry is needed so add a boolean to avoid multiple debugfs initialization Signed-off-by:
-
Daniel Vetter authored
- inline functions need to be static inline, otherwise gcc can opt to not inline and the linker gets unhappy. - no forward decls for inline functions, just include the right headers. Cc: Oded Gabbay <oded.gabbay@gmail.com> Cc: Ben Goz <ben.goz@amd.com> Reviewed-by:
Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by:
-
