- 05 Mar, 2019 5 commits
-
-
Chris Wilson authored
As we allow per-context engine allows the legacy concept of I915_EXEC_RING no longer applies universally. We are still exposing the unrelated exec-id in GEM_BUSY, so transition this ioctl (once more slightly changing its ABI, but no one cares) over to only reporting the uabi-class (not instance as we can not foreseeably fit those into the small bitmask). The only user of the extended ring information from GEM_BUSY is ddx/sna, which tries to use the non-rcs business information to guide which engine to use for subsequent operations on foreign bo. All that matters for it is the decision between rcs and !rcs, so it is unaffected by the change in higher bits. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190305162643.20243-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
We no longer use the semaphore sync registers on gen6/7, so including them in the GPU error state is mere noise. References: 6faf5916 ("drm/i915: Remove HW semaphores for gen7 inter-engine synchronisation") Signed-off-by:
-
Chris Wilson authored
As we don't unmask and enable the vebox interrupts if the engine is not being used, we will never generate the vebox interrupts as part of the IIR and so can unconditionally check IIR without fear of chasing into the vebox. Signed-off-by:
-
Chris Wilson authored
As the scratch page is the only one to be allocated with variable size, rather than keep an unused slot in all i915_page_table structs, store it alongside the vm->scratch_page. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190305135430.4948-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Replace the open-coded memset loops with the memset32/64 routines that reduce to a single instruction or two: add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-83 (-83) Function old new delta gen6_ppgtt_clear_range 371 344 -27 gen8_ppgtt_clear_pd 575 519 -56 Signed-off-by:
-
- 04 Mar, 2019 9 commits
-
-
Lucas De Marchi authored
According to the spec PP_SEQUENCE_STATE_ON_S1_1 is the correct name, so just rename it. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190302011405.6405-1-lucas.demarchi@intel.com
-
Lucas De Marchi authored
Define a HAS_TRANSCODER_EDP() macro that checks if we have defined an offset for this transcoder. This allows platforms to be defined without eDP transcoder. Cc: Mika Kahola <mika.kahola@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222230254.20351-2-lucas.demarchi@intel.com
-
Lucas De Marchi authored
Instead of keeping track of the number of transcoders, loop through all the interesting ones and check if there is a correspondent offset. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
José Roberto de Souza authored
With fastboot enabled in gen9+ it broke the HDMI reset as just setting mode_changed to true causes a fastset and here we want a full modeset that will disable and then enable the encoder of this HDMI link actually, so setting connectors_changed instead that will cause modeset as desired. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
-
José Roberto de Souza authored
drm_atomic_commit() call chain already takes care of adding connectors and planes, so lets no add then manually if not changing their states. drm_atomic_commit() drm_atomic_check_only() config->funcs->atomic_check()/intel_atomic_check() drm_atomic_helper_check() drm_atomic_helper_check_modeset() for_each_oldnew_crtc_in_state() drm_atomic_add_affected_connectors() drm_atomic_add_affected_planes() Reviewed-by: -
José Roberto de Souza authored
Atomic state needs to be put even if the commit was successful. Fixes: dba14b27 ("drm/i915: Reinitialize sink scrambling/TMDS clock ratio on HPD") Reviewed-by:
-
Ville Syrjälä authored
The plane used to scan out NV12 luma on ICL is logically off but actually on. Fix the state checker to account for this. Cc: Imre Deak <imre.deak@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109457Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Rodrigo Vivi authored
No functional change. Just a reorg to match the preferred behavior. When rebasing internal branch on top of latest sort I noticed few more cases that needs to get reordered. Let's do in a bundle this time and hoping there's no other missing places. v2: Check for HSW/BDW ULT before generic IS_HASWELL or IS_BROADWELL or it doesn't work as pointed by Ville. But also ULT came afterwards anyway. v3: Accepting suggestions from Lucas: Sort CNL/CFL, KBL/SKL, and use <= 8 removing chv and bdw. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Chris Wilson authored
We may race the interrupt signaling with retirement, in which case the order in which we acquire the reference inside the interrupt is vital to provide the correct barrier against the request being freed in retirement, i.e. we need to acquire our reference before marking the breadcrumb as cancelled (as soon as the breadcrumb is cancelled retirement may drop its reference to the request without serialisation with the interrupt handler). <3>[ 683.372226] BUG i915_request (Tainted: G U ): Object already free <3>[ 683.372269] ----------------------------------------------------------------------------- <4>[ 683.372323] Disabling lock debugging due to kernel taint <3>[ 683.372393] INFO: Allocated in i915_request_alloc+0x169/0x810 [i915] age=0 cpu=2 pid=1420 <3>[ 683.372412] kmem_cache_alloc+0x21c/0x280 <3>[ 683.372478] i915_request_alloc+0x169/0x810 [i915] <3>[ 683.372540] i915_gem_do_execbuffer+0x84e/0x1ae0 [i915] <3>[ 683.372603] i915_gem_execbuffer2_ioctl+0x11b/0x420 [i915] <3>[ 683.372617] drm_ioctl_kernel+0x83/0xf0 <3>[ 683.372626] drm_ioctl+0x2f3/0x3b0 <3>[ 683.372636] do_vfs_ioctl+0xa0/0x6e0 <3>[ 683.372645] ksys_ioctl+0x35/0x60 <3>[ 683.372654] __x64_sys_ioctl+0x11/0x20 <3>[ 683.372664] do_syscall_64+0x55/0x190 <3>[ 683.372675] entry_SYSCALL_64_after_hwframe+0x49/0xbe <3>[ 683.372740] INFO: Freed in i915_request_retire_upto+0xfb/0x2e0 [i915] age=0 cpu=0 pid=1419 <3>[ 683.372807] i915_request_retire_upto+0xfb/0x2e0 [i915] <3>[ 683.372870] i915_request_add+0x3bd/0x9d0 [i915] <3>[ 683.372931] i915_gem_do_execbuffer+0x141c/0x1ae0 [i915] <3>[ 683.372991] i915_gem_execbuffer2_ioctl+0x11b/0x420 [i915] <3>[ 683.373001] drm_ioctl_kernel+0x83/0xf0 <3>[ 683.373008] drm_ioctl+0x2f3/0x3b0 <3>[ 683.373015] do_vfs_ioctl+0xa0/0x6e0 <3>[ 683.373023] ksys_ioctl+0x35/0x60 <3>[ 683.373030] __x64_sys_ioctl+0x11/0x20 <3>[ 683.373037] do_syscall_64+0x55/0x190 <3>[ 683.373045] entry_SYSCALL_64_after_hwframe+0x49/0xbe <3>[ 683.373054] INFO: Slab 0x0000000079bcdd71 objects=30 used=2 fp=0x000000006d77b8af flags=0x8000000000010201 <3>[ 683.373069] INFO: Object 0x000000006d77b8af @offset=24000 fp=0x000000007b061eab <3>[ 683.373083] Redzone 00000000ee47ef28: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ <3>[ 683.373097] Redzone 000000000cb91471: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ <3>[ 683.373111] Redzone 00000000cf2b86ee: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ <3>[ 683.373125] Redzone 00000000f1f5a2cd: bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ <3>[ 683.373139] Object 000000006d77b8af: 00 00 00 00 5a 5a 5a 5a 00 3c 49 c0 ff ff ff ff ....ZZZZ.<I..... <3>[ 683.373153] Object 000000006f9b6204: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373167] Object 0000000091410ffb: e0 dd 6b fa 87 9f ff ff e0 dd 6b fa 87 9f ff ff ..k.......k..... <3>[ 683.373181] Object 000000004cdf799d: 20 de 6b fa 87 9f ff ff 3d 00 00 00 00 00 00 00 .k.....=....... <3>[ 683.373195] Object 00000000545afebc: aa b3 00 00 00 00 00 00 0f 00 00 00 00 00 00 00 ................ <3>[ 683.373209] Object 00000000e4a394a8: 25 bd bd 1b 9f 00 00 00 00 00 00 00 5a 5a 5a 5a %...........ZZZZ <3>[ 683.373223] Object 0000000029a7878a: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ <3>[ 683.373237] Object 00000000d37797b3: ff ff ff ff ff ff ff ff e8 6e 57 c0 ff ff ff ff .........nW..... <3>[ 683.373251] Object 00000000d50414f6: 00 b3 c8 8e ff ff ff ff 80 b0 c8 8e ff ff ff ff ................ <3>[ 683.373265] Object 00000000c28e8847: 41 01 4b c0 ff ff ff ff 00 00 88 8e 88 9f ff ff A.K............. <3>[ 683.373279] Object 00000000c74212ab: 38 c1 6d 8a 88 9f ff ff 58 21 74 8a 88 9f ff ff 8.m.....X!t..... <3>[ 683.373293] Object 000000000d8012cf: c0 c1 6d 8a 88 9f ff ff 58 79 dd d9 87 9f ff ff ..m.....Xy...... <3>[ 683.373306] Object 00000000c9900b91: 98 d0 4e 8a 88 9f ff ff 58 3c e8 9b 88 9f ff ff ..N.....X<...... <3>[ 683.373320] Object 0000000044bb8c3d: 58 3c e8 9b 88 9f ff ff 64 f5 04 00 00 00 00 00 X<......d....... <3>[ 683.373334] Object 00000000180c4cca: 00 00 00 00 ad 4e ad de ff ff ff ff 5a 5a 5a 5a .....N......ZZZZ <3>[ 683.373348] Object 00000000c9044498: ff ff ff ff ff ff ff ff e0 6e 57 c0 ff ff ff ff .........nW..... <3>[ 683.373362] Object 0000000072d0dfb3: 00 00 00 00 00 00 00 00 c0 b1 c8 8e ff ff ff ff ................ <3>[ 683.373376] Object 0000000081f198b9: 55 01 4b c0 ff ff ff ff d8 de 6b fa 87 9f ff ff U.K.......k..... <3>[ 683.373390] Object 000000006a375a13: d8 de 6b fa 87 9f ff ff cc 05 39 c0 ff ff ff ff ..k.......9..... <3>[ 683.373404] Object 00000000b8392dd1: ff ff ff ff 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ....ZZZZZZZZZZZZ <3>[ 683.373418] Object 00000000e5c1bbcb: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373432] Object 00000000199feccd: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373446] Object 0000000020f5e08b: 20 df 6b fa 87 9f ff ff 20 df 6b fa 87 9f ff ff .k..... .k..... <3>[ 683.373460] Object 0000000090591b0f: 30 df 6b fa 87 9f ff ff 30 df 6b fa 87 9f ff ff 0.k.....0.k..... <3>[ 683.373473] Object 00000000232f7cd0: 40 df 6b fa 87 9f ff ff 40 df 6b fa 87 9f ff ff @.k.....@.k..... <3>[ 683.373487] Object 0000000060458027: 50 df 6b fa 87 9f ff ff 50 df 6b fa 87 9f ff ff P.k.....P.k..... <3>[ 683.373501] Object 00000000e3c82ce2: 06 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ <3>[ 683.373515] Object 00000000ec804eb8: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373529] Object 00000000ce7ccc08: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373543] Object 000000002dbc575c: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373557] Object 00000000b86d3417: 5a 5a 5a 5a 5a 5a 5a 5a 00 de 6b fa 87 9f ff ff ZZZZZZZZ..k..... <3>[ 683.373571] Object 00000000d1e82276: b8 61 dd d9 87 9f ff ff a0 06 00 00 d0 06 00 00 .a.............. <3>[ 683.373585] Object 00000000cc53f969: e8 06 00 00 20 07 00 00 28 07 00 00 00 00 00 00 .... ...(....... <3>[ 683.373599] Object 00000000ea2426d2: 40 0c 8c 7b 88 9f ff ff 00 00 00 00 00 00 00 00 @..{............ <3>[ 683.373613] Object 00000000b860c1c3: 68 0d 8c 7b 88 9f ff ff 68 25 8c 7b 88 9f ff ff h..{....h%.{.... <3>[ 683.373627] Object 0000000016455ea0: 96 d5 05 00 01 00 00 00 00 5a 5a 5a 5a 5a 5a 5a .........ZZZZZZZ <3>[ 683.373640] Object 00000000e66ede82: 00 e0 6b fa 87 9f ff ff 00 e0 6b fa 87 9f ff ff ..k.......k..... <3>[ 683.373654] Object 0000000080964939: 10 e0 6b fa 87 9f ff ff 10 e0 6b fa 87 9f ff ff ..k.......k..... <3>[ 683.373668] Object 00000000e7ffc5dd: 00 00 00 00 00 00 00 00 00 01 00 00 00 00 ad de ................ <3>[ 683.373682] Object 000000000ce9d6ca: 00 02 00 00 00 00 ad de 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ <3>[ 683.373696] Object 00000000386659d0: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373710] Redzone 0000000075d2069d: bb bb bb bb bb bb bb bb ........ <3>[ 683.373723] Padding 0000000054e14c6b: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373737] Padding 00000000425e5b34: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <3>[ 683.373751] Padding 00000000ad3d4db9: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ <4>[ 683.373767] CPU: 1 PID: 151 Comm: kworker/1:2 Tainted: G BU 5.0.0-rc8-g39139489403b-drmtip_236+ #1 <4>[ 683.373769] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake Y LPDDR4x T4 RVP TLC, BIOS ICLSFWR1.R00.3087.A00.1902250334 02/25/2019 <4>[ 683.373773] Workqueue: events delayed_fput <4>[ 683.373775] Call Trace: <4>[ 683.373777] <IRQ> <4>[ 683.373781] dump_stack+0x67/0x9b <4>[ 683.373783] free_debug_processing+0x344/0x370 <4>[ 683.373832] ? intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915] <4>[ 683.373836] __slab_free+0x337/0x4f0 <4>[ 683.373840] ? _raw_spin_unlock_irqrestore+0x39/0x60 <4>[ 683.373844] ? debug_check_no_obj_freed+0x132/0x210 <4>[ 683.373889] ? intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915] <4>[ 683.373892] ? kmem_cache_free+0x275/0x2e0 <4>[ 683.373894] kmem_cache_free+0x275/0x2e0 <4>[ 683.373939] intel_engine_breadcrumbs_irq+0x2e4/0x380 [i915] <4>[ 683.373984] gen8_cs_irq_handler+0x4e/0xa0 [i915] <4>[ 683.374026] gen11_irq_handler+0x24b/0x330 [i915] <4>[ 683.374032] __handle_irq_event_percpu+0x41/0x2d0 <4>[ 683.374034] ? handle_irq_event+0x27/0x50 <4>[ 683.374038] handle_irq_event_percpu+0x2b/0x70 <4>[ 683.374040] handle_irq_event+0x2f/0x50 <4>[ 683.374044] handle_edge_irq+0xe7/0x190 <4>[ 683.374048] handle_irq+0x67/0x160 <4>[ 683.374051] do_IRQ+0x5e/0x130 <4>[ 683.374054] common_interrupt+0xf/0xf Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109827 Fixes: 52c0fdb2 ("drm/i915: Replace global breadcrumbs with per-context interrupt tracking") Signed-off-by:
-
- 02 Mar, 2019 2 commits
-
-
Lucas De Marchi authored
No change in behavior, this only allows to more easily follow the flow of gen8_de_irq_handler without the mask assignments for each platform. This also re-organizes the branches a little bit, so the one-off case for CNL_WITH_PORT_F is separate from the generic gen >= 11. v2: rename de_port_iir_aux_mask -> gen8_de_port_aux_mask (Ville) Signed-off-by:
-
Lucas De Marchi authored
Let the MG plls have their own hooks since it shares very little with other PLL types. It's also better so the platform info contains the info if the PLL is for MG PHY rather than relying on the PLL ids. Signed-off-by:
-
- 01 Mar, 2019 9 commits
-
-
Tvrtko Ursulin authored
Needed for a following patch. Signed-off-by:
-
Chris Wilson authored
This was supposed to be a mask of all known rings, but it is being used by execbuffer to filter out invalid rings, and so is instead mapping high unused values onto valid rings. Instead of a mask of all known rings, we need it to be the mask of all possible rings. Fixes: 549f7365 ("drm/i915: Enable SandyBridge blitter ring") Fixes: de1add36 ("drm/i915: Decouple execbuf uAPI from internal implementation") Signed-off-by:
-
Chris Wilson authored
We don't want to busywait on the GPU if we have other work to do. If we give non-busywaiting workloads higher (initial) priority than workloads that require a busywait, we will prioritise work that is ready to run immediately. We then also have to be careful that we don't give earlier semaphores an accidental boost because later work doesn't wait on other rings, hence we keep a history of semaphore usage of the dependency chain. v2: Stop rolling the bits into a chain and just use a flag in case this request or any of our dependencies use a semaphore. The rolling around was contagious as Tvrtko was heard to fall off his chair. Testcase: igt/gem_exec_schedule/semaphore Signed-off-by:
-
Chris Wilson authored
Having introduced per-context seqno, we now have a means to identity progress across the system without feel of rollback as befell the global_seqno. That is we can program a MI_SEMAPHORE_WAIT operation in advance of submission safe in the knowledge that our target seqno and address is stable. However, since we are telling the GPU to busy-spin on the target address until it matches the signaling seqno, we only want to do so when we are sure that busy-spin will be completed quickly. To achieve this we only submit the request to HW once the signaler is itself executing (modulo preemption causing us to wait longer), and we only do so for default and above priority requests (so that idle priority tasks never themselves hog the GPU waiting for others). As might be reasonably expected, HW semaphores excel in inter-engine synchronisation microbenchmarks (where the 3x reduced latency / increased throughput more than offset the power cost of spinning on a second ring) and have significant improvement (can be up to ~10%, most see no change) for single clients that utilize multiple engines (typically media players and transcoders), without regressing multiple clients that can saturate the system or changing the power envelope dramatically. v3: Drop the older NEQ branch, now we pin the signaler's HWSP anyway. v4: Tell the world and include it as part of scheduler caps. Testcase: igt/gem_exec_whisper Testcase: igt/benchmarks/gem_wsim Signed-off-by:
-
Chris Wilson authored
In preparation for enabling HW semaphores, we need to keep in flight timeline HWSP alive until its use across entire system has completed, as any other timeline active on the GPU may still refer back to the already retired timeline. We both have to delay recycling available cachelines and unpinning old HWSP until the next idle point. An easy option would be to simply keep all used HWSP until the system as a whole was idle, i.e. we could release them all at once on parking. However, on a busy system, we may never see a global idle point, essentially meaning the resource will be leaked until we are forced to do a GC pass. We already employ a fine-grained idle detection mechanism for vma, which we can reuse here so that each cacheline can be freed immediately after the last request using it is retired. v3: Keep track of the activity of each cacheline. v4: cacheline_free() on canceling the seqno tracking v5: Finally with a testcase to exercise wraparound v6: Pack cacheline into empty bits of page-aligned vaddr v7: Use i915_utils to hide the pointer casting around bit manipulation Signed-off-by:
-
Chris Wilson authored
On unwinding the active request we give it a small (limited to internal priority levels) boost to prevent it from being gazumped a second time. However, this means that it can be promoted to above the request that triggered the preemption request, causing a preempt-to-idle cycle for no change. We can avoid this if we take the boost into account when checking if the preemption request is valid. v2: After preemption the active request will be after the preemptee if they end up with equal priority. v3: Tvrtko pointed out that this, the existing logic, makes I915_PRIORITY_WAIT non-preemptible. Document this interesting quirk! v4: Prove Tvrtko was right about WAIT being non-preemptible and test it. v5: Except not all priorities were made equal, and the WAIT not preempting is only if we start off as !NEWCLIENT. v6: More commentary after coming to an understanding about what I had forgotten to say. Signed-off-by:
-
Chris Wilson authored
There is no point in whitelisting a register that the user then cannot write to, so check the register exists before merging such patches. v2: Mark SLICE_COMMON_ECO_CHICKEN1 [731c] as write-only v3: Use different variables for different meanings! Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190301140404.26690-6-chris@chris-wilson.co.uk Link: https://patchwork.freedesktop.org/patch/msgid/20190301160108.19039-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
The icl wm1+ underrun w/a has been added to the spec. It changed slightly from the previous incarnation by requiring that we mirror the lines watermark and the ignore lines bit from WM0 into WM1. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Tested-by:
Clint Taylor <Clinton.A.Taylor@intel.com>
-
Chris Wilson authored
A simple mutex used for guarding the flow of requests in and out of the timeline. In the short-term, it will be used only to guard the addition of requests into the timeline, taken on alloc and released on commit so that only one caller can construct a request into the timeline (important as the seqno and ring pointers must be serialised). This will be used by observers to ensure that the seqno/hwsp is stable. Later, when we have reduced retiring to only operate on a single timeline at a time, we can then use the mutex as the sole guard required for retiring. Signed-off-by:
-
- 28 Feb, 2019 8 commits
-
-
Chris Wilson authored
WAIT is occasionally suppressed by virtue of preempted requests being promoted to NEWCLIENT if they have not all ready received that boost. Make this consistent for all WAIT boosts that they are not allowed to preempt executing contexts and are merely granted the right to be at the front of the queue for the next execution slot. This is in keeping with the desire that the WAIT boost be a minor tweak that does not give excessive promotion to its user and open ourselves to trivial abuse. The problem with the inconsistent WAIT preemption becomes more apparent as the preemption is propagated across the engines, where one engine may preempt and the other not, and we be relying on the exact execution order being consistent across engines (e.g. using HW semaphores to coordinate parallel execution). v2: Also protect GuC submission from false preemption loops. v3: Build bug safeguards and better debug messages for st. v4: Do the priority bumping in unsubmit (i.e. on preemption/reset unwind), applying it earlier during submit causes out-of-order execution combined with execute fences. v5: Call sw_fence_fini for our dummy request (Matthew) Signed-off-by:
-
Chris Wilson authored
Gcc has a slight preference if we use __ffs() to subtract one from the index once rather than each use: __execlists_submission_tasklet 2867 2847 -20 Signed-off-by:
-
Chris Wilson authored
We currently use a worker queued from an rcu callback to determine when a how grace period has elapsed while we remained idle. We use this idle delay to infer that we will be idle for a while and this is a suitable point at which we can trim our global memory caches. Since we wrote that, this mechanism now exists as rcu_work, and having converted the idle shrinkers over to using that, we can remove our own variant. v2: Say goodbye to gt.epoch as well. v3: Remove the misplaced and redundant comment before parking globals Signed-off-by:
-
Chris Wilson authored
As our allocations are not device specific, we can move our slab caches to a global scope. Signed-off-by:
-
Chris Wilson authored
As kmem_caches share the same properties (size, allocation/free behaviour) for all potential devices, we can use global caches. While this potential has worse fragmentation behaviour (one can argue that different devices would have different activity lifetimes, but you can also argue that activity is temporal across the system) it is the default behaviour of the system at large to amalgamate matching caches. The benefit for us is much reduced pointer dancing along the frequent allocation paths. v2: Defer shrinking until after a global grace period for futureproofing multiple consumers of the slab caches, similar to the current strategy for avoiding shrinking too early. Signed-off-by:
-
Chris Wilson authored
If we have parked, then we must have passed an idleness test and still be idle. We chose not to use this shortcut in the past so that we could use the idleness test at any time and inspect HW. However, some HW like Sandybridge, doesn't like being woken up frivolously, so avoid doing so. References: 0b702dca ("drm/i915: Avoid waking the engines just to check if they are idle") Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190227214159.7946-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
This reverts commit 0b702dca. CI reports that this is not as reliable as it first appears, with failures starting to sporadically occur in selftests. Fixes: 0b702dca ("drm/i915: Avoid waking the engines just to check if they are idle") Signed-off-by:
-
Chris Wilson authored
Do a pass over all the engines upon starting to determine the global scheduler capability flags (those that are agreed upon by all). Signed-off-by:
-
- 27 Feb, 2019 2 commits
-
-
Chris Wilson authored
Exploit that reads of the ring registers return 0 from the engine when it is idle and we do not apply forcewake to know that if the engine is idle then both reads will be identical (and so we interpret the ring as idle). The ulterior motive is to try and reduce the number of spurious wakeups to avoid untimely death, such as: <3> [85.046836] [drm:fw_domains_get [i915]] *ERROR* render: timed out waiting for forcewake ack request. <4> [85.051916] ------------[ cut here ]------------ <4> [85.051917] GT thread status wait timed out <4> [85.051963] WARNING: CPU: 2 PID: 2195 at drivers/gpu/drm/i915/intel_uncore.c:303 __gen6_gt_wait_for_thread_c0+0x6e/0xa0 [i915] <4> [85.051964] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic i915 x86_pkg_temp_thermal coretemp mei_hdcp crct10dif_pclmul crc32_pclmul snd_hda_intel ghash_clmulni_intel snd_hda_codec broadcom bcm_phy_lib i2c_i801 snd_hwdep snd_hda_core tg3 snd_pcm ptp pps_core mei_me mei prime_numbers lpc_ich <4> [85.051980] CPU: 2 PID: 2195 Comm: drm_read Tainted: G U 5.0.0-rc8-CI-CI_DRM_5662+ #1 <4> [85.051981] Hardware name: Dell Inc. XPS 8300 /0Y2MRG, BIOS A06 10/17/2011 <4> [85.052012] RIP: 0010:__gen6_gt_wait_for_thread_c0+0x6e/0xa0 [i915] <4> [85.052015] Code: 8b 92 5c 80 13 00 83 e2 07 75 d5 5b 5d c3 80 3d 5b 6a 1a 00 00 75 f4 48 c7 c7 38 21 31 a0 c6 05 4b 6a 1a 00 01 e8 e2 84 ea e0 <0f> 0b eb dd 80 3d 3a 6a 1a 00 00 75 98 48 c7 c6 08 21 31 a0 48 c7 <4> [85.052016] RSP: 0018:ffffc9000043bd00 EFLAGS: 00010086 <4> [85.052019] RAX: 0000000000000000 RBX: ffff888217c50000 RCX: 0000000000000000 <4> [85.052020] RDX: 0000000000000007 RSI: ffffffff820cb141 RDI: 00000000ffffffff <4> [85.052022] RBP: 00000013cd30f2fb R08: 0000000000000000 R09: 0000000000000001 <4> [85.052024] R10: ffffc9000043bce0 R11: 0000000000000000 R12: ffff888217c50ee0 <4> [85.052025] R13: 0000000000000001 R14: 00000000ffffffff R15: ffff888218076530 <4> [85.052028] FS: 00007fc79d049980(0000) GS:ffff888227a80000(0000) knlGS:0000000000000000 <4> [85.052029] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [85.052031] CR2: 00007f782e2940f8 CR3: 000000022458e006 CR4: 00000000000606e0 <4> [85.052033] Call Trace: <4> [85.052064] gen6_read32+0x14e/0x250 [i915] <4> [85.052096] intel_engine_is_idle+0x7d/0x180 [i915] <4> [85.052126] intel_engines_are_idle+0x29/0x50 [i915] <4> [85.052153] i915_drop_caches_set+0x21c/0x290 [i915] <4> [85.052160] simple_attr_write+0xb0/0xd0 <4> [85.052165] full_proxy_write+0x51/0x80 <4> [85.052170] __vfs_write+0x31/0x190 <4> [85.052176] ? rcu_read_lock_sched_held+0x6f/0x80 <4> [85.052178] ? rcu_sync_lockdep_assert+0x29/0x50 <4> [85.052181] ? __sb_start_write+0x152/0x1f0 <4> [85.052183] ? __sb_start_write+0x163/0x1f0 <4> [85.052187] vfs_write+0xbd/0x1b0 <4> [85.052191] ksys_write+0x50/0xc0 <4> [85.052196] do_syscall_64+0x55/0x190 <4> [85.052200] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4> [85.052202] RIP: 0033:0x7fc79c9d3281 <4> [85.052204] Code: c3 0f 1f 84 00 00 00 00 00 48 8b 05 59 8d 20 00 c3 0f 1f 84 00 00 00 00 00 8b 05 8a d1 20 00 85 c0 75 16 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 41 54 55 49 89 d4 53 <4> [85.052206] RSP: 002b:00007fffa4a0a7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 <4> [85.052208] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fc79c9d3281 <4> [85.052210] RDX: 0000000000000005 RSI: 00007fffa4a0a880 RDI: 0000000000000008 <4> [85.052212] RBP: 00007fffa4a0a820 R08: 0000000000000000 R09: 0000000000000000 <4> [85.052213] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc79c9bc718 <4> [85.052215] R13: 0000000000000003 R14: 00007fc79c9c1628 R15: 00007fc79c9bdd80 <4> [85.052223] irq event stamp: 71630 <4> [85.052226] hardirqs last enabled at (71629): [<ffffffff8197b64c>] _raw_spin_unlock_irqrestore+0x4c/0x60 <4> [85.052228] hardirqs last disabled at (71630): [<ffffffff8197b4bd>] _raw_spin_lock_irqsave+0xd/0x50 <4> [85.052231] softirqs last enabled at (70444): [<ffffffff81c0033a>] __do_softirq+0x33a/0x4b9 <4> [85.052234] softirqs last disabled at (70433): [<ffffffff810b51b1>] irq_exit+0xd1/0xe0 <4> [85.052264] WARNING: CPU: 2 PID: 2195 at drivers/gpu/drm/i915/intel_uncore.c:303 __gen6_gt_wait_for_thread_c0+0x6e/0xa0 [i915] Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190227114958.32438-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
When a request has its priority changed, we traverse the graph of all of its signalers to raise their priorities to match (priority inheritance). If the request has already started executing its payload, we know that all of its signalers must have signaled and we do not need to process our list of signalers. Signed-off-by:
-
- 26 Feb, 2019 5 commits
-
-
Ville Syrjälä authored
Dump out the infoframes in the normal crtc state dump. TODO: Try to better integrate the infoframe dumps with drm state dumps Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190225174106.2163-10-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Check the infoframes and infoframe enable state when comparing two crtc states. We'll use the infoframe logging functions from video/hdmi.c to show the infoframes as part of the state dump. TODO: Try to better integrate the infoframe dumps with drm state dumps v2: drm_printk() is no more Signed-off-by: -
Ville Syrjälä authored
Read the HDMI infoframes from the hbuf and unpack them into the crtc state. Well, actually just AVI infoframe for now but let's write the infoframe readout code in a more generic fashion in case we expand this later. Note that Daniel was sceptical about the benefit if this and also concerned about the potential for crappy sdvo encoders not implementing the hbuf read commands. My (admittedly limited) experience is that such encoders don't implement even the get/set hdmi encoding commands and thus would always be treated as dvi only. Hence I believe this is safe, and also IMO preferable having quirks to deal with missing readout support. The readout support is neatly isolated in the sdvo code whereas the quirk would leak to other parts of the driver (state checker, fastboot, etc.) thus complicating the lives of other people. Signed-off-by:
-
Ville Syrjälä authored
As with regular HDMI encoders, let's precompute the infoframes (actually just AVI infoframe for the time being) with SDVO HDMI encoders. v2: Drop the WARN_ON() from drm_hdmi_avi_infoframe_from_display_mode() return since that could genuinely fail due to user asking for incompatible aspect ratio v3: .compute_config() now returns int Signed-off-by: -
Ville Syrjälä authored
Add code to read the infoframes from the video DIP and unpack them into the crtc state. v2: Make the read funcs return void (Daniel) Drop the duplicate infoframe enabled checks (Daniel) Add a FIXME for lspcon infoframe readout Signed-off-by:
-
