- 30 Jan, 2008 40 commits
-
-
Jeremy Fitzhardinge authored
Make sure pte_t, whatever its definition, has a pte element with type pteval_t. This allows common code to access it without needing to be specifically parameterised on what pagetable mode we're compiling for. For 32-bit, this means that pte_t becomes a union with "pte" and "{ pte_low, pte_high }" (PAE) or just "pte_low" (non-PAE). Signed-off-by:Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
Ingo Molnar authored
fix sign extension bug in PTE_MASK / _PTE_CHG_MASK. this resolves the following bootup crash on PAE systems: [ 94.710726] init[1]: segfault at 00000004 ip 49471cbb sp bff0c6c0 error 4 [ 94.717764] init[1]: segfault at 00000004 ip 49471cbb sp bff0c6c0 error 4 [ 94.724772] init[1]: segfault at 00000004 ip 49471cbb sp bff0c6c0 error 4 [ 94.731777] init[1]: segfault at 00000004 ip 49471cbb sp bff0c6c0 error 4 Signed-off-by:
-
Ingo Molnar authored
based on: Subject: x86: unify pgtable accessors which use supported_pte_mask From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Jeremy Fitzhardinge authored
Make users of supported_pte_mask common. This has the side-effect of introducing the variable for 32-bit non-PAE, but I think its a pretty small cost to simplify the code. Signed-off-by:
-
Jeremy Fitzhardinge authored
In 32-bit PAE, mask NX from pte_pfn, since it isn't part of the PFN. This code is due for unification anyway, but this fixes a latent bug. Signed-off-by:
-
Jeremy Fitzhardinge authored
Unify functions to test and set bits in pagetable entries. NOP: only moves existing code around, without any change to it. Signed-off-by:
-
Ingo Molnar authored
reorder. NOP. Signed-off-by:
-
Ingo Molnar authored
add new ops to 32-bit. based on: Subject: x86/pgtable: unify pagetable accessors From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Ingo Molnar authored
change the pte_mk inlines to the unified format. Non-NOP! based on: Subject: x86/pgtable: unify pagetable accessors From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Ingo Molnar authored
change the pte_dirty/* inlines to the unified format. Non-NOP! based on: Subject: x86/pgtable: unify pagetable accessors From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Ingo Molnar authored
based on: Subject: x86/pgtable: unify pagetable accessors From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Ingo Molnar authored
based on: Subject: x86/pgtable: fix constant sign extension problem From: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by:
-
Jeremy Fitzhardinge authored
Avoid a conflict between Voyager's leave_mm and asm-x86/mmu.h's leave_mm. Signed-off-by:
-
Jeremy Fitzhardinge authored
32 and 64-bit use the same flags for pagetable entries, so make them all common. [ mingo@elte.hu: fixes ] Signed-off-by:
-
Ingo Molnar authored
add PWT bit to NOCACHE flags. No real difference to CPUs, but needed later for PAT. Signed-off-by:
-
Paolo Ciarrocchi authored
Fix one error reported by checkpatch, it now reports: total: 0 errors, 0 warnings, 42 lines checked Signed-off-by:
Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com> Signed-off-by:
-
Mel Gorman authored
On 32-bit NUMA, the memmap representing struct pages on each node is allocated from node-local memory if possible. As only node-0 has memory from ZONE_NORMAL, the memmap must be mapped into low memory. This is done by reserving space in the Kernel Virtual Area (KVA) for the memmap belonging to other nodes by taking pages from the end of ZONE_NORMAL and remapping the other nodes memmap into those virtual addresses. The node boundaries are then adjusted so that the region of pages is not used and it is marked as reserved in the bootmem allocator. This reserved portion of the KVA is PMD aligned althought strictly speaking that requirement could be lifted (see thread at http://lkml.org/lkml/2007/8/24/220). The problem is that when aligned, there may be a portion of ZONE_NORMAL at the end that is not used for memmap and does not have an initialised memmap nor is it marked reserved in the bootmem allocator. Later in the boot process, these pages are freed and a storm of Bad page state messages result. This patch marks these pages reserved that are wasted due to alignment in the bootmem allocator so they are not accidently freed. It is worth noting that memory from node-0 is wasted where it could have been put into ZONE_HIGHMEM on NUMA machines. Worse, the KVA is always reserved from the location of real memory even when there is plenty of spare virtual address space. This patch also makes sure that reserve_bootmem() is not called with a 0-length size in numa_kva_reserve(). When this happens, it usually means that a kernel built for Summit is being booted on a normal machine. The resulting BUG_ON() is misleading so it is caught here. Signed-off-by:
Mel Gorman <mel@csn.ul.ie> Signed-off-by:
Andy Whitcroft <apw@shadowen.org> Signed-off-by:
-
Markus Metzger authored
Return the size of bts_struct in the PTRACE_BTS_STATUS command. Change types to u32. Signed-off-by:
Markus Metzger <markus.t.metzger@intel.com> Signed-off-by:
-
Ingo Molnar authored
migration helpers for KVM. Signed-off-by:
-
Pavel Machek authored
Unify arch/x86/kernel/acpi/sleep*.c Pretty trivial unification; when two functions differed, it was usually in error handling, and better of the two was picked up. Signed-off-by:
Pavel Machek <pavel@suse.cz> Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl> Tested-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Ingo Molnar authored
clean up arch/x86/mm/fault_64.c a bit. Signed-off-by:
-
Ananth N Mavinakayanahalli authored
Here is a quick and naive smoke test for kprobes. This is intended to just verify if some unrelated change broke the *probes subsystem. It is self contained, architecture agnostic and isn't of any great use by itself. This needs to be built in the kernel and runs a basic set of tests to verify if kprobes, jprobes and kretprobes run fine on the kernel. In case of an error, it'll print out a message with a "BUG" prefix. This is a start; we intend to add more tests to this bucket over time. Thanks to Jim Keniston and Masami Hiramatsu for comments and suggestions. Tested on x86 (32/64) and powerpc. Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by:
Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by:
-
travis@sgi.com authored
Form a single percpu.h from percpu_32.h and percpu_64.h. Both are now pretty small so this is simply adding them together. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
Mike Travis <travis@sgi.com> Signed-off-by:
-
travis@sgi.com authored
x86_64 provides an optimized way to determine the local per cpu area offset through the pda and determines the base by accessing a remote pda. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
travis@sgi.com authored
x86_32 only provides a special way to obtain the local per cpu area offset via x86_read_percpu. Otherwise it can fully use the generic handling. Cc: ak@suse.de Signed-off-by:
-
travis@sgi.com authored
- add support for PER_CPU_ATTRIBUTES - fix generic smp percpu_modcopy to use per_cpu_offset() macro. Add the ability to use generic/percpu even if the arch needs to override several aspects of its operations. This will enable the use of generic percpu.h for all arches. An arch may define: __per_cpu_offset Do not use the generic pointer array. Arch must define per_cpu_offset(cpu) (used by x86_64, s390). __my_cpu_offset Can be defined to provide an optimized way to determine the offset for variables of the currently executing processor. Used by ia64, x86_64, x86_32, sparc64, s/390. SHIFT_PTR(ptr, offset) If an arch defines it then special handling of pointer arithmentic may be implemented. Used by s/390. (Some of these special percpu arch implementations may be later consolidated so that there are less cases to deal with.) Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
travis@sgi.com authored
- Special consideration for IA64: Add the ability to specify arch specific per cpu flags - remove .data.percpu attribute from DEFINE_PER_CPU for non-smp case. The arch definitions are all the same. So move them into linux/percpu.h. We cannot move DECLARE_PER_CPU since some include files just include asm/percpu.h to avoid include recursion problems. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
travis@sgi.com authored
The use of the __GENERIC_PERCPU is a bit problematic since arches may want to run their own percpu setup while using the generic percpu definitions. Replace it through a kconfig variable. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
H. Peter Anvin authored
The boot protocol has until now required that the initrd be located in lowmem, which makes the lowmem/highmem boundary visible to the boot loader. This was exported to the bootloader via a compile-time field. Unfortunately, the vmalloc= command-line option breaks this part of the protocol; instead of adding yet another hack that affects the bootloader, have the kernel relocate the initrd down below the lowmem boundary inside the kernel itself. Note that this does not rely on HIGHMEM being enabled in the kernel. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Huang, Ying authored
This patch export the boot parameters via debugfs for debugging. The files added are as follow: boot_params/data : binary file for struct boot_params boot_params/version : boot protocol version This patch is based on 2.6.24-rc5-mm1 and has been tested on i386 and x86_64 platform. This patch is based on the Peter Anvin's proposal. Signed-off-by:
Huang Ying <ying.huang@intel.com> Signed-off-by:
-
Miguel Boton authored
reboot_{32|64}.c unification patch. This patch unifies the code from the reboot_32.c and reboot_64.c files. It has been tested in computers with X86_32 and X86_64 kernels and it looks like all reboot modes work fine (EFI restart system hasn't been tested yet). Probably I made some mistakes (like I usually do) so I hope we can identify and fix them soon. Signed-off-by:Miguel Boton <mboton@gmail.com> Signed-off-by:
-
Arjan van de Ven authored
Unlike oopses, WARN_ON() currently does't print the loaded modules list. This makes it harder to take action on certain bug reports. For example, recently there were a set of WARN_ON()s reported in the mac80211 stack, which were just signalling a driver bug. It takes then anther round trip to the bug reporter (if he responds at all) to find out which driver is at fault. Another issue is that, unlike oopses, WARN_ON() doesn't currently printk the helpful "cut here" line, nor the "end of trace" marker. Now that WARN_ON() is out of line, the size increase due to this is minimal and it's worth adding. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Arjan van de Ven authored
A quick grep shows that there are currently 1145 instances of WARN_ON in the kernel. Currently, WARN_ON is pretty much entirely inlined, which makes it hard to enhance it without growing the size of the kernel (and getting Andrew unhappy). This patch build on top of Olof's patch that introduces __WARN, and places the slowpath out of line. It also uses Ingo's suggestion to not use __FUNCTION__ but to use kallsyms to do the lookup; this saves a ton of extra space since gcc doesn't need to store the function string twice now: 3936367 833603 624736 5394706 525112 vmlinux.before 3917508 833603 624736 5375847 520767 vmlinux-slowpath 15Kb savings... Signed-off-by:
Matt Meckall <mpm@selenic.com> Signed-off-by:
-
Olof Johansson authored
Introduce __WARN() in the generic case, so the generic WARN_ON() can use arch-specific code for when the condition is true. Signed-off-by:
Olof Johansson <olof@lixom.net> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Abhishek Sagar authored
Signed-off-by:
Abhishek Sagar <sagar.abhishek@gmail.com> Signed-off-by:
Quentin Barnes <qbarnes@gmail.com> Signed-off-by:
-
Eric Dumazet authored
While examining vmlinux namelist on i386 (nm -v vmlinux) I noticed : c01021d0 t es7000_rename_gsi c010221a T es7000_start_cpu <Big Hole> c0103000 T thread_saved_pc and c0113218 T acpi_restore_state_mem c0113219 T acpi_save_state_mem <Big Hole> c0114000 t wakeup_code This is because arch/x86/kernel/acpi/wakeup_32.S forces a .text alignment of 4096 bytes. (I have no idea if it is really needed, since arch/x86/kernel/acpi/wakeup_64.S uses a 16 bytes alignment *only*) So arch/x86/kernel/built-in.o also has this alignment arch/x86/kernel/built-in.o: file format elf32-i386 Sections: Idx Name Size VMA LMA File off Algn 0 .text 00018c94 00000000 00000000 00001000 2**12 CONTENTS, ALLOC, LOAD, RELOC, READONLY, CODE But as arch/x86/kernel/acpi/wakeup_32.o is not the first object linked into arch/x86/kernel/built-in.o, linker had to build several holes to meet alignement requirements, because of .o nestings in the kbuild process. This can be solved by using a special section, .text.page_aligned, so that no holes are needed. # size vmlinux.before vmlinux.after text data bss dec hex filename 4619942 422838 458752 5501532 53f25c vmlinux.before 4610534 422838 458752 5492124 53cd9c vmlinux.after This saves 9408 bytes Signed-off-by:Eric Dumazet <dada1@cosmosbay.com> Signed-off-by:
-
Ingo Molnar authored
clean up include/asm-x86/calling.h. Signed-off-by:
-
Andi Kleen authored
Otherwise WARNING: vmlinux.o(.text+0x64a9): Section mismatch: reference to .init.text:machine_specific_memory_setup (between 'memory_setup' and 'show_cpuinfo') Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Andi Kleen authored
Someone complained that the 32-bit defconfig contains AS as default IO scheduler. Change that to CFQ. Signed-off-by:
-
Andi Kleen authored
Previously the complete files were #ifdef'ed, but now handle that in the Makefile. May save a minor bit of compilation time. [ Stephen Rothwell <sfr@canb.auug.org.au>: build dependency fix ] Signed-off-by:
-
