- 26 Jan, 2019 40 commits
-
-
Eric Sandeen authored
[ Upstream commit 3cc31fa6 ] iomap_is_partially_uptodate() is intended to check wither blocks within the selected range of a not-uptodate page are uptodate; if the range we care about is up to date, it's an optimization. However, the iomap implementation continues to check all blocks up to from+count, which is beyond the page, and can even be well beyond the iop->uptodate bitmap. I think the worst that will happen is that we may eventually find a zero bit and return "not partially uptodate" when it would have otherwise returned true, and skip the optimization. Still, it's clearly an invalid memory access that must be fixed. So: fix this by limiting the search to within the page as is done in the non-iomap variant, block_is_partially_uptodate(). Zorro noticed thiswhen KASAN went off for 512 byte blocks on a 64k page system: BUG: KASAN: slab-out-of-bounds in iomap_is_partially_uptodate+0x1a0/0x1e0 Read of size 8 at addr ffff800120c3a318 by task fsstress/22337 Reported-by:
Zorro Lang <zlang@redhat.com> Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Eric Sandeen <sandeen@sandeen.net> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Qian Cai authored
[ Upstream commit c7a082e4 ] UBSAN reported those with MegaRAID SAS-3 3108, [ 77.467308] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32 [ 77.475402] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]' [ 77.481677] CPU: 16 PID: 333 Comm: kworker/16:1 Not tainted 4.20.0-rc5+ #1 [ 77.488556] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018 [ 77.495791] Workqueue: events work_for_cpu_fn [ 77.500154] Call trace: [ 77.502610] dump_backtrace+0x0/0x2c8 [ 77.506279] show_stack+0x24/0x30 [ 77.509604] dump_stack+0x118/0x19c [ 77.513098] ubsan_epilogue+0x14/0x60 [ 77.516765] __ubsan_handle_out_of_bounds+0xfc/0x13c [ 77.521767] mr_update_load_balance_params+0x150/0x158 [megaraid_sas] [ 77.528230] MR_ValidateMapInfo+0x2cc/0x10d0 [megaraid_sas] [ 77.533825] megasas_get_map_info+0x244/0x2f0 [megaraid_sas] [ 77.539505] megasas_init_adapter_fusion+0x9b0/0xf48 [megaraid_sas] [ 77.545794] megasas_init_fw+0x1ab4/0x3518 [megaraid_sas] [ 77.551212] megasas_probe_one+0x2c4/0xbe0 [megaraid_sas] [ 77.556614] local_pci_probe+0x7c/0xf0 [ 77.560365] work_for_cpu_fn+0x34/0x50 [ 77.564118] process_one_work+0x61c/0xf08 [ 77.568129] worker_thread+0x534/0xa70 [ 77.571882] kthread+0x1c8/0x1d0 [ 77.575114] ret_from_fork+0x10/0x1c [ 89.240332] UBSAN: Undefined behaviour in drivers/scsi/megaraid/megaraid_sas_fp.c:117:32 [ 89.248426] index 255 is out of range for type 'MR_LD_SPAN_MAP [1]' [ 89.254700] CPU: 16 PID: 95 Comm: kworker/u130:0 Not tainted 4.20.0-rc5+ #1 [ 89.261665] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.50 06/01/2018 [ 89.268903] Workqueue: events_unbound async_run_entry_fn [ 89.274222] Call trace: [ 89.276680] dump_backtrace+0x0/0x2c8 [ 89.280348] show_stack+0x24/0x30 [ 89.283671] dump_stack+0x118/0x19c [ 89.287167] ubsan_epilogue+0x14/0x60 [ 89.290835] __ubsan_handle_out_of_bounds+0xfc/0x13c [ 89.295828] MR_LdRaidGet+0x50/0x58 [megaraid_sas] [ 89.300638] megasas_build_io_fusion+0xbb8/0xd90 [megaraid_sas] [ 89.306576] megasas_build_and_issue_cmd_fusion+0x138/0x460 [megaraid_sas] [ 89.313468] megasas_queue_command+0x398/0x3d0 [megaraid_sas] [ 89.319222] scsi_dispatch_cmd+0x1dc/0x8a8 [ 89.323321] scsi_request_fn+0x8e8/0xdd0 [ 89.327249] __blk_run_queue+0xc4/0x158 [ 89.331090] blk_execute_rq_nowait+0xf4/0x158 [ 89.335449] blk_execute_rq+0xdc/0x158 [ 89.339202] __scsi_execute+0x130/0x258 [ 89.343041] scsi_probe_and_add_lun+0x2fc/0x1488 [ 89.347661] __scsi_scan_target+0x1cc/0x8c8 [ 89.351848] scsi_scan_channel.part.3+0x8c/0xc0 [ 89.356382] scsi_scan_host_selected+0x130/0x1f0 [ 89.361002] do_scsi_scan_host+0xd8/0xf0 [ 89.364927] do_scan_async+0x9c/0x320 [ 89.368594] async_run_entry_fn+0x138/0x420 [ 89.372780] process_one_work+0x61c/0xf08 [ 89.376793] worker_thread+0x13c/0xa70 [ 89.380546] kthread+0x1c8/0x1d0 [ 89.383778] ret_from_fork+0x10/0x1c This is because when populating Driver Map using firmware raid map, all non-existing VDs set their ldTgtIdToLd to 0xff, so it can be skipped later. From drivers/scsi/megaraid/megaraid_sas_base.c , memset(instance->ld_ids, 0xff, MEGASAS_MAX_LD_IDS); From drivers/scsi/megaraid/megaraid_sas_fp.c , /* For non existing VDs, iterate to next VD*/ if (ld >= (MAX_LOGICAL_DRIVES_EXT - 1)) continue; However, there are a few places that failed to skip those non-existing VDs due to off-by-one errors. Then, those 0xff leaked into MR_LdRaidGet(0xff, map) and triggered the out-of-bound accesses. Fixes: 51087a86 ("megaraid_sas : Extended VD support") Signed-off-by:
Qian Cai <cai@lca.pw> Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Yanjiang Jin authored
[ Upstream commit e57b2945 ] We must free all irqs during shutdown, else kexec's 2nd kernel would hang in pqi_wait_for_completion_io() as below: Call trace: pqi_wait_for_completion_io pqi_submit_raid_request_synchronous.constprop.78+0x23c/0x310 [smartpqi] pqi_configure_events+0xec/0x1f8 [smartpqi] pqi_ctrl_init+0x814/0xca0 [smartpqi] pqi_pci_probe+0x400/0x46c [smartpqi] local_pci_probe+0x48/0xb0 pci_device_probe+0x14c/0x1b0 really_probe+0x218/0x3fc driver_probe_device+0x70/0x140 __driver_attach+0x11c/0x134 bus_for_each_dev+0x70/0xc8 driver_attach+0x30/0x38 bus_add_driver+0x1f0/0x294 driver_register+0x74/0x12c __pci_register_driver+0x64/0x70 pqi_init+0xd0/0x10000 [smartpqi] do_one_initcall+0x60/0x1d8 do_init_module+0x64/0x1f8 load_module+0x10ec/0x1350 __se_sys_finit_module+0xd4/0x100 __arm64_sys_finit_module+0x28/0x34 el0_svc_handler+0x104/0x160 el0_svc+0x8/0xc This happens only in the following combinations: 1. smartpqi is built as module, not built-in; 2. We have a disk connected to smartpqi card; 3. Both kexec's 1st and 2nd kernels use this disk as Rootfs' mount point. Signed-off-by:
Yanjiang Jin <yanjiang.jin@hxt-semitech.com> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Zhi Chen authored
[ Upstream commit 2d3b5585 ] There was a race condition in SMP that an ath10k_peer was created but its member sta was null. Following are procedures of ath10k_peer creation and member sta access in peer statistics path. 1. Peer creation: ath10k_peer_create() =>ath10k_wmi_peer_create() =>ath10k_wait_for_peer_created() ... # another kernel path, RX from firmware ath10k_htt_t2h_msg_handler() =>ath10k_peer_map_event() =>wake_up() # ar->peer_map[id] = peer //add peer to map #wake up original path from waiting ... # peer->sta = sta //sta assignment 2. RX path of statistics ath10k_htt_t2h_msg_handler() =>ath10k_update_per_peer_tx_stats() =>ath10k_htt_fetch_peer_stats() # peer->sta //sta accessing Any access of peer->sta after peer was added to peer_map but before sta was assigned could cause a null pointer issue. And because these two steps are asynchronous, no proper lock can protect them. So both peer and sta need to be checked before access. Tested: QCA9984 with firmware ver 10.4-3.9.0.1-00005 Signed-off-by:
Zhi Chen <zhichen@codeaurora.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Kevin Barnett authored
[ Upstream commit 2ba55c98 ] Problem: The Linux kernel takes a logical volume offline after a LUN reset. This is generally accompanied by this message in the dmesg output: Device offlined - not ready after error recovery Root Cause: The root cause is a "quirk" in the timeout handling in the Linux SCSI layer. The Linux kernel places a 30-second timeout on most media access commands (reads and writes) that it send to device drivers. When a media access command times out, the Linux kernel goes into error recovery mode for the LUN that was the target of the command that timed out. Every command that timed out is kept on a list inside of the Linux kernel to be retried later. The kernel attempts to recover the command(s) that timed out by issuing a LUN reset followed by a TEST UNIT READY. If the LUN reset and TEST UNIT READY commands are successful, the kernel retries the command(s) that timed out. Each SCSI command issued by the kernel has a result field associated with it. This field indicates the final result of the command (success or error). When a command times out, the kernel places a value in this result field indicating that the command timed out. The "quirk" is that after the LUN reset and TEST UNIT READY commands are completed, the kernel checks each command on the timed-out command list before retrying it. If the result field is still "timed out", the kernel treats that command as not having been successfully recovered for a retry. If the number of commands that are in this state are greater than two, the kernel takes the LUN offline. Fix: When our RAIDStack receives a LUN reset, it simply waits until all outstanding commands complete. Generally, all of these outstanding commands complete successfully. Therefore, the fix in the smartpqi driver is to always set the command result field to indicate success when a request completes successfully. This normally isn’t necessary because the result field is always initialized to success when the command is submitted to the driver. So when the command completes successfully, the result field is left untouched. But in this case, the kernel changes the result field behind the driver’s back and then expects the field to be changed by the driver as the commands that timed-out complete. Reviewed-by:
Dave Carroll <david.carroll@microsemi.com> Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Signed-off-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
-
Stephan Günther authored
[ Upstream commit 23c3828a ] With commit 09c2f95a ("scsi: mpt3sas: Swap I/O memory read value back to cpu endianness"), 64bit writes in _base_writeq() were rewritten to use __raw_writeq() instad of writeq(). This introduced a bug apparent on powerpc64 systems such as the Raptor Talos II that causes the HBA to drop from the PCIe bus under heavy load and being reinitialized after a couple of seconds. It can easily be triggered on affacted systems by using something like fio --name=random-write --iodepth=4 --rw=randwrite --bs=4k --direct=0 \ --size=128M --numjobs=64 --end_fsync=1 fio --name=random-write --iodepth=4 --rw=randwrite --bs=64k --direct=0 \ --size=128M --numjobs=64 --end_fsync=1 a couple of times. In my case I tested it on both a ZFS raidz2 and a btrfs raid6 using LSI 9300-8i and 9400-8i controllers. The fix consists in resembling the write ordering of writeq() by adding a mandatory write memory barrier before device access and a compiler barrier afterwards. The additional MMIO barrier is superfluous. Signed-off-by:
Stephan Günther <moepi@moepi.net> Reported-by:
Matt Corallo <linux@bluematt.me> Acked-by:
Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Signed-off-by:
-
Parvi Kaustubhi authored
[ Upstream commit 8036e90f ] Acquiring the rtnl lock while holding usdev_lock could result in a deadlock. For example: usnic_ib_query_port() | mutex_lock(&us_ibdev->usdev_lock) | ib_get_eth_speed() | rtnl_lock() rtnl_lock() | usnic_ib_netdevice_event() | mutex_lock(&us_ibdev->usdev_lock) This commit moves the usdev_lock acquisition after the rtnl lock has been released. This is safe to do because usdev_lock is not protecting anything being accessed in ib_get_eth_speed(). Hence, the correct order of holding locks (rtnl -> usdev_lock) is not violated. Signed-off-by:
Parvi Kaustubhi <pkaustub@cisco.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Daniel Vetter authored
[ Upstream commit 4f4b3743 ] This is the much more correct fix for my earlier attempt at: https://lkml.org/lkml/2018/12/10/118 Short recap: - There's not actually a locking issue, it's just lockdep being a bit too eager to complain about a possible deadlock. - Contrary to what I claimed the real problem is recursion on kn->count. Greg pointed me at sysfs_break_active_protection(), used by the scsi subsystem to allow a sysfs file to unbind itself. That would be a real deadlock, which isn't what's happening here. Also, breaking the active protection means we'd need to manually handle all the lifetime fun. - With Rafael we discussed the task_work approach, which kinda works, but has two downsides: It's a functional change for a lockdep annotation issue, and it won't work for the bind file (which needs to get the errno from the driver load function back to userspace). - Greg also asked why this never showed up: To hit this you need to unregister a 2nd driver from the unload code of your first driver. I guess only gpus do that. The bug has always been there, but only with a recent patch series did we add more locks so that lockdep built a chain from unbinding the snd-hda driver to the acpi_video_unregister call. Full lockdep splat: [12301.898799] ============================================ [12301.898805] WARNING: possible recursive locking detected [12301.898811] 4.20.0-rc7+ #84 Not tainted [12301.898815] -------------------------------------------- [12301.898821] bash/5297 is trying to acquire lock: [12301.898826] 00000000f61c6093 (kn->count#39){++++}, at: kernfs_remove_by_name_ns+0x3b/0x80 [12301.898841] but task is already holding lock: [12301.898847] 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190 [12301.898856] other info that might help us debug this: [12301.898862] Possible unsafe locking scenario: [12301.898867] CPU0 [12301.898870] ---- [12301.898874] lock(kn->count#39); [12301.898879] lock(kn->count#39); [12301.898883] *** DEADLOCK *** [12301.898891] May be due to missing lock nesting notation [12301.898899] 5 locks held by bash/5297: [12301.898903] #0: 00000000cd800e54 (sb_writers#4){.+.+}, at: vfs_write+0x17f/0x1b0 [12301.898915] #1: 000000000465e7c2 (&of->mutex){+.+.}, at: kernfs_fop_write+0xd3/0x190 [12301.898925] #2: 000000005f634021 (kn->count#39){++++}, at: kernfs_fop_write+0xdc/0x190 [12301.898936] #3: 00000000414ef7ac (&dev->mutex){....}, at: device_release_driver_internal+0x34/0x240 [12301.898950] #4: 000000003218fbdf (register_count_mutex){+.+.}, at: acpi_video_unregister+0xe/0x40 [12301.898960] stack backtrace: [12301.898968] CPU: 1 PID: 5297 Comm: bash Not tainted 4.20.0-rc7+ #84 [12301.898974] Hardware name: Hewlett-Packard HP EliteBook 8460p/161C, BIOS 68SCF Ver. F.01 03/11/2011 [12301.898982] Call Trace: [12301.898989] dump_stack+0x67/0x9b [12301.898997] __lock_acquire+0x6ad/0x1410 [12301.899003] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899010] ? find_held_lock+0x2d/0x90 [12301.899017] ? mutex_spin_on_owner+0xe4/0x150 [12301.899023] ? find_held_lock+0x2d/0x90 [12301.899030] ? lock_acquire+0x90/0x180 [12301.899036] lock_acquire+0x90/0x180 [12301.899042] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899049] __kernfs_remove+0x296/0x310 [12301.899055] ? kernfs_remove_by_name_ns+0x3b/0x80 [12301.899060] ? kernfs_name_hash+0xd/0x80 [12301.899066] ? kernfs_find_ns+0x6c/0x100 [12301.899073] kernfs_remove_by_name_ns+0x3b/0x80 [12301.899080] bus_remove_driver+0x92/0xa0 [12301.899085] acpi_video_unregister+0x24/0x40 [12301.899127] i915_driver_unload+0x42/0x130 [i915] [12301.899160] i915_pci_remove+0x19/0x30 [i915] [12301.899169] pci_device_remove+0x36/0xb0 [12301.899176] device_release_driver_internal+0x185/0x240 [12301.899183] unbind_store+0xaf/0x180 [12301.899189] kernfs_fop_write+0x104/0x190 [12301.899195] __vfs_write+0x31/0x180 [12301.899203] ? rcu_read_lock_sched_held+0x6f/0x80 [12301.899209] ? rcu_sync_lockdep_assert+0x29/0x50 [12301.899216] ? __sb_start_write+0x13c/0x1a0 [12301.899221] ? vfs_write+0x17f/0x1b0 [12301.899227] vfs_write+0xb9/0x1b0 [12301.899233] ksys_write+0x50/0xc0 [12301.899239] do_syscall_64+0x4b/0x180 [12301.899247] entry_SYSCALL_64_after_hwframe+0x49/0xbe [12301.899253] RIP: 0033:0x7f452ac7f7a4 [12301.899259] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 00 8b 05 aa f0 2c 00 48 63 ff 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 55 53 48 89 d5 48 89 f3 48 83 [12301.899273] RSP: 002b:00007ffceafa6918 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [12301.899282] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f452ac7f7a4 [12301.899288] RDX: 000000000000000d RSI: 00005612a1abf7c0 RDI: 0000000000000001 [12301.899295] RBP: 00005612a1abf7c0 R08: 000000000000000a R09: 00005612a1c46730 [12301.899301] R10: 000000000000000a R11: 0000000000000246 R12: 000000000000000d [12301.899308] R13: 0000000000000001 R14: 00007f452af4a740 R15: 000000000000000d Looking around I've noticed that usb and i2c already handle similar recursion problems, where a sysfs file can unbind the same type of sysfs somewhere else in the hierarchy. Relevant commits are: commit 356c05d5 Author: Alan Stern <stern@rowland.harvard.edu> Date: Mon May 14 13:30:03 2012 -0400 sysfs: get rid of some lockdep false positives commit e9b526fe Author: Alexander Sverdlin <alexander.sverdlin@nsn.com> Date: Fri May 17 14:56:35 2013 +0200 i2c: suppress lockdep warning on delete_device Implement the same trick for driver bind/unbind. v2: Put the macro into bus.c (Greg). Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Ramalingam C <ramalingam.c@intel.com> Cc: Arend van Spriel <aspriel@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Bartosz Golaszewski <brgl@bgdev.pl> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: Vivek Gautam <vivek.gautam@codeaurora.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Takashi Sakamoto authored
[ Upstream commit 644b2e97 ] This commit fixes hard-coded model-id for an unit of Apogee Ensemble with a correct value. This unit uses DM1500 ASIC produced ArchWave AG (formerly known as BridgeCo AG). I note that this model supports three modes in the number of data channels in tx/rx streams; 8 ch pairs, 10 ch pairs, 18 ch pairs. The mode is switched by Vendor-dependent AV/C command, like: $ cd linux-firewire-utils $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0600000000 (8ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0601000000 (10ch pairs) $ ./firewire-request /dev/fw1 fcp 0x00ff000003dbeb0602000000 (18ch pairs) When switching between different mode, the unit disappears from IEEE 1394 bus, then appears on the bus with different combination of stream formats. In a mode of 18 ch pairs, available sampling rate is up to 96.0 kHz, else up to 192.0 kHz. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': True, 'chip_ID': 21474898341, 'cmc': True, 'cyc_clk_acc': 100, 'generation': 2, 'imc': True, 'isc': True, 'link_spd': 2, 'max_ROM': 1, 'max_rec': 512, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['HARDWARE_VERSION', 19], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble'], ['VERSION', 5297], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 126702], ['DESCRIPTOR', 'Ensemble']]], [ 'DEPENDENT_INFO', [ ['SPECIFIER_ID', 2037], ['VERSION', 1], [(58, 'IMMEDIATE'), 16777159], [(59, 'IMMEDIATE'), 1048576], [(60, 'IMMEDIATE'), 16777159], [(61, 'IMMEDIATE'), 6291456]]]]} Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Raghuram Hegde authored
[ Upstream commit 2da711bc ] Include the new USB product ID for Intel Bluetooth device 22260 family(CcPeak) The /sys/kernel/debug/usb/devices portion for this device is: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=0029 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms Signed-off-by:
Raghuram Hegde <raghuram.hegde@intel.com> Signed-off-by:
Chethan T N <chethan.tumkur.narayan@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Milan Broz authored
[ Upstream commit ef87bfc2 ] Reference to a device in device-mapper table contains offset in sectors. If the sector_t is 32bit integer (CONFIG_LBDAF is not set), then several device-mapper targets can overflow this offset and validity check is then performed on a wrong offset and a wrong table is activated. See for example (on 32bit without CONFIG_LBDAF) this overflow: # dmsetup create test --table "0 2048 linear /dev/sdg 4294967297" # dmsetup table test 0 2048 linear 8:96 1 This patch adds explicit check for overflow if the offset is sector_t type. Signed-off-by:
Milan Broz <gmazyland@gmail.com> Reviewed-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Yangtao Li authored
[ Upstream commit 5eb73c83 ] The function of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. integrator_ap_timer_init_of() doesn't do that. The pri_node and the sec_node are used as an identifier to compare against the current node, so we can directly drop the refcount after getting the node from the path as it is not used as pointer. By dropping the refcount right after getting it, a single variable is needed instead of two. Fix this by use a single variable and drop the refcount right after of_find_node_by_path(). Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
-
Javier Barrio authored
[ Upstream commit 41c4f85c ] Commit 1fa5efe3 (ext4: Use generic helpers for quotaon and quotaoff) made possible to call quotactl(Q_XQUOTAON/OFF) on ext4 filesystems with sysfile quota support. This leads to calling dquot_enable/disable without s_umount held in excl. mode, because quotactl_cmd_onoff checks only for Q_QUOTAON/OFF. The following WARN_ON_ONCE triggers (in this case for dquot_enable, ext4, latest Linus' tree): [ 117.807056] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: quota,prjquota [...] [ 155.036847] WARNING: CPU: 0 PID: 2343 at fs/quota/dquot.c:2469 dquot_enable+0x34/0xb9 [ 155.036851] Modules linked in: quota_v2 quota_tree ipv6 af_packet joydev mousedev psmouse serio_raw pcspkr i2c_piix4 intel_agp intel_gtt e1000 ttm drm_kms_helper drm agpgart fb_sys_fops syscopyarea sysfillrect sysimgblt i2c_core input_leds kvm_intel kvm irqbypass qemu_fw_cfg floppy evdev parport_pc parport button crc32c_generic dm_mod ata_generic pata_acpi ata_piix libata loop ext4 crc16 mbcache jbd2 usb_storage usbcore sd_mod scsi_mod [ 155.036901] CPU: 0 PID: 2343 Comm: qctl Not tainted 4.20.0-rc6-00025-gf5d58277 #9 [ 155.036903] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 155.036911] RIP: 0010:dquot_enable+0x34/0xb9 [ 155.036915] Code: 41 56 41 55 41 54 55 53 4c 8b 6f 28 74 02 0f 0b 4d 8d 7d 70 49 89 fc 89 cb 41 89 d6 89 f5 4c 89 ff e8 23 09 ea ff 85 c0 74 0a <0f> 0b 4c 89 ff e8 8b 09 ea ff 85 db 74 6a 41 8b b5 f8 00 00 00 0f [ 155.036918] RSP: 0018:ffffb09b00493e08 EFLAGS: 00010202 [ 155.036922] RAX: 0000000000000001 RBX: 0000000000000008 RCX: 0000000000000008 [ 155.036924] RDX: 0000000000000001 RSI: 0000000000000002 RDI: ffff9781b67cd870 [ 155.036926] RBP: 0000000000000002 R08: 0000000000000000 R09: 61c8864680b583eb [ 155.036929] R10: ffffb09b00493e48 R11: ffffffffff7ce7d4 R12: ffff9781b7ee8d78 [ 155.036932] R13: ffff9781b67cd800 R14: 0000000000000004 R15: ffff9781b67cd870 [ 155.036936] FS: 00007fd813250b88(0000) GS:ffff9781ba000000(0000) knlGS:0000000000000000 [ 155.036939] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 155.036942] CR2: 00007fd812ff61d6 CR3: 000000007c882000 CR4: 00000000000006b0 [ 155.036951] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 155.036953] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 155.036955] Call Trace: [ 155.037004] dquot_quota_enable+0x8b/0xd0 [ 155.037011] kernel_quotactl+0x628/0x74e [ 155.037027] ? do_mprotect_pkey+0x2a6/0x2cd [ 155.037034] __x64_sys_quotactl+0x1a/0x1d [ 155.037041] do_syscall_64+0x55/0xe4 [ 155.037078] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 155.037105] RIP: 0033:0x7fd812fe1198 [ 155.037109] Code: 02 77 0d 48 89 c1 48 c1 e9 3f 75 04 48 8b 04 24 48 83 c4 50 5b c3 48 83 ec 08 49 89 ca 48 63 d2 48 63 ff b8 b3 00 00 00 0f 05 <48> 89 c7 e8 c1 eb ff ff 5a c3 48 63 ff b8 bb 00 00 00 0f 05 48 89 [ 155.037112] RSP: 002b:00007ffe8cd7b050 EFLAGS: 00000206 ORIG_RAX: 00000000000000b3 [ 155.037116] RAX: ffffffffffffffda RBX: 00007ffe8cd7b148 RCX: 00007fd812fe1198 [ 155.037119] RDX: 0000000000000000 RSI: 00007ffe8cd7cea9 RDI: 0000000000580102 [ 155.037121] RBP: 00007ffe8cd7b0f0 R08: 000055fc8eba8a9d R09: 0000000000000000 [ 155.037124] R10: 00007ffe8cd7b074 R11: 0000000000000206 R12: 00007ffe8cd7b168 [ 155.037126] R13: 000055fc8eba8897 R14: 0000000000000000 R15: 0000000000000000 [ 155.037131] ---[ end trace 210f864257175c51 ]--- and then the syscall proceeds without s_umount locking. This patch locks the superblock ->s_umount sem. in exclusive mode for all Q_XQUOTAON/OFF quotactls too in addition to Q_QUOTAON/OFF. AFAICT, other than ext4, only xfs and ocfs2 are affected by this change. The VFS will now call in xfs_quota_* functions with s_umount held, which wasn't the case before. This looks good to me but I can not say for sure. Ext4 and ocfs2 where already beeing called with s_umount exclusive via quota_quotaon/off which is basically the same. Signed-off-by:
Javier Barrio <javier.barrio.mart@gmail.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit d7a8c4a6 ] There are systems such as the Android NDK API level 24 has the open_memstream() function but doesn't provide a prototype, adding noise to the build: builtin-timechart.c: In function 'cat_backtrace': builtin-timechart.c:486:2: warning: implicit declaration of function 'open_memstream' [-Wimplicit-function-declaration] FILE *f = open_memstream(&p, &p_len); ^ builtin-timechart.c:486:2: warning: nested extern declaration of 'open_memstream' [-Wnested-externs] builtin-timechart.c:486:12: warning: initialization makes pointer from integer without a cast FILE *f = open_memstream(&p, &p_len); ^ Define a LACKS_OPEN_MEMSTREAM_PROTOTYPE define so that code needing that can get a prototype. Checked in the bionic git repo to be available since level 23: https://android.googlesource.com/platform/bionic/+/master/libc/include/stdio.h#241 FILE* open_memstream(char** __ptr, size_t* __size_ptr) __INTRODUCED_IN(23); Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-343ashae97e5bq6vizusyfno@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 748fe088 ] There are systems such as the Android NDK API level 24 has the sigqueue() function but doesn't provide a prototype, adding noise to the build: util/evlist.c: In function 'perf_evlist__prepare_workload': util/evlist.c:1494:4: warning: implicit declaration of function 'sigqueue' [-Wimplicit-function-declaration] if (sigqueue(getppid(), SIGUSR1, val)) ^ util/evlist.c:1494:4: warning: nested extern declaration of 'sigqueue' [-Wnested-externs] Define a LACKS_SIGQUEUE_PROTOTYPE define so that code needing that can get a prototype. Checked in the bionic git repo to be available since level 23: https://android.googlesource.com/platform/bionic/+/master/libc/include/signal.h#123 int sigqueue(pid_t __pid, int __signal, const union sigval __value) __INTRODUCED_IN(23); Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-lmhpev1uni9kdrv7j29glyov@git.kernel.orgSigned-off-by:
-
Leo Yan authored
[ Upstream commit 43fd5666 ] The structure cs_etm_queue uses 'prev_packet' to point to previous packet, this can be used to combine with new coming packet to generate samples. In function cs_etm__flush() it swaps packets only when the flag 'etm->synth_opts.last_branch' is true, this means that it will not swap packets if without option '--itrace=il' to generate last branch entries; thus for this case the 'prev_packet' doesn't point to the correct previous packet and the stale packet still will be used to generate sequential sample. Thus if dump trace with 'perf script' command we can see the incorrect flow with the stale packet's address info. This patch corrects packets swapping in cs_etm__flush(); except using the flag 'etm->synth_opts.last_branch' it also checks the another flag 'etm->sample_branches', if any flag is true then it swaps packets so can save correct content to 'prev_packet'. Finally this can fix the wrong program flow dumping issue. The patch has a minor refactoring to use 'etm->synth_opts.last_branch' instead of 'etmq->etm->synth_opts.last_branch' for condition checking, this is consistent with that is done in cs_etm__sample(). Signed-off-by:
Leo Yan <leo.yan@linaro.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-2-git-send-email-leo.yan@linaro.orgSigned-off-by:
-
Nikos Tsironis authored
[ Upstream commit 721b1d98 ] kcopyd has no upper limit to the number of jobs one can allocate and issue. Under certain workloads this can lead to excessive memory usage and workqueue stalls. For example, when creating multiple dm-snapshot targets with a 4K chunk size and then writing to the origin through the page cache. Syncing the page cache causes a large number of BIOs to be issued to the dm-snapshot origin target, which itself issues an even larger (because of the BIO splitting taking place) number of kcopyd jobs. Running the following test, from the device mapper test suite [1], dmtest run --suite snapshot -n many_snapshots_of_same_volume_N , with 8 active snapshots, results in the kcopyd job slab cache growing to 10G. Depending on the available system RAM this can lead to the OOM killer killing user processes: [463.492878] kthreadd invoked oom-killer: gfp_mask=0x6040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null), order=1, oom_score_adj=0 [463.492894] kthreadd cpuset=/ mems_allowed=0 [463.492948] CPU: 7 PID: 2 Comm: kthreadd Not tainted 4.19.0-rc7 #3 [463.492950] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [463.492952] Call Trace: [463.492964] dump_stack+0x7d/0xbb [463.492973] dump_header+0x6b/0x2fc [463.492987] ? lockdep_hardirqs_on+0xee/0x190 [463.493012] oom_kill_process+0x302/0x370 [463.493021] out_of_memory+0x113/0x560 [463.493030] __alloc_pages_slowpath+0xf40/0x1020 [463.493055] __alloc_pages_nodemask+0x348/0x3c0 [463.493067] cache_grow_begin+0x81/0x8b0 [463.493072] ? cache_grow_begin+0x874/0x8b0 [463.493078] fallback_alloc+0x1e4/0x280 [463.493092] kmem_cache_alloc_node+0xd6/0x370 [463.493098] ? copy_process.part.31+0x1c5/0x20d0 [463.493105] copy_process.part.31+0x1c5/0x20d0 [463.493115] ? __lock_acquire+0x3cc/0x1550 [463.493121] ? __switch_to_asm+0x34/0x70 [463.493129] ? kthread_create_worker_on_cpu+0x70/0x70 [463.493135] ? finish_task_switch+0x90/0x280 [463.493165] _do_fork+0xe0/0x6d0 [463.493191] ? kthreadd+0x19f/0x220 [463.493233] kernel_thread+0x25/0x30 [463.493235] kthreadd+0x1bf/0x220 [463.493242] ? kthread_create_on_cpu+0x90/0x90 [463.493248] ret_from_fork+0x3a/0x50 [463.493279] Mem-Info: [463.493285] active_anon:20631 inactive_anon:4831 isolated_anon:0 [463.493285] active_file:80216 inactive_file:80107 isolated_file:435 [463.493285] unevictable:0 dirty:51266 writeback:109372 unstable:0 [463.493285] slab_reclaimable:31191 slab_unreclaimable:3483521 [463.493285] mapped:526 shmem:4903 pagetables:1759 bounce:0 [463.493285] free:33623 free_pcp:2392 free_cma:0 ... [463.493489] Unreclaimable slab info: [463.493513] Name Used Total [463.493522] bio-6 1028KB 1028KB [463.493525] bio-5 1028KB 1028KB [463.493528] dm_snap_pending_exception 236783KB 243789KB [463.493531] dm_exception 41KB 42KB [463.493534] bio-4 1216KB 1216KB [463.493537] bio-3 439396KB 439396KB [463.493539] kcopyd_job 6973427KB 6973427KB ... [463.494340] Out of memory: Kill process 1298 (ruby2.3) score 1 or sacrifice child [463.494673] Killed process 1298 (ruby2.3) total-vm:435740kB, anon-rss:20180kB, file-rss:4kB, shmem-rss:0kB [463.506437] oom_reaper: reaped process 1298 (ruby2.3), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB Moreover, issuing a large number of kcopyd jobs results in kcopyd hogging the CPU, while processing them. As a result, processing of work items, queued for execution on the same CPU as the currently running kcopyd thread, is stalled for long periods of time, hurting performance. Running the aforementioned test we get, in dmesg, messages like the following: [67501.194592] BUG: workqueue lockup - pool cpus=4 node=0 flags=0x0 nice=0 stuck for 27s! [67501.195586] Showing busy workqueues and worker pools: [67501.195591] workqueue events: flags=0x0 [67501.195597] pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256 [67501.195611] pending: cache_reap [67501.195641] workqueue mm_percpu_wq: flags=0x8 [67501.195645] pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256 [67501.195656] pending: vmstat_update [67501.195682] workqueue kblockd: flags=0x18 [67501.195687] pwq 5: cpus=2 node=0 flags=0x0 nice=-20 active=1/256 [67501.195698] pending: blk_timeout_work [67501.195753] workqueue kcopyd: flags=0x8 [67501.195757] pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256 [67501.195768] pending: do_work [dm_mod] [67501.195802] workqueue kcopyd: flags=0x8 [67501.195806] pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256 [67501.195817] pending: do_work [dm_mod] [67501.195834] workqueue kcopyd: flags=0x8 [67501.195838] pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256 [67501.195848] pending: do_work [dm_mod] [67501.195881] workqueue kcopyd: flags=0x8 [67501.195885] pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=1/256 [67501.195896] pending: do_work [dm_mod] [67501.195920] workqueue kcopyd: flags=0x8 [67501.195924] pwq 8: cpus=4 node=0 flags=0x0 nice=0 active=2/256 [67501.195935] in-flight: 67:do_work [dm_mod] [67501.195945] pending: do_work [dm_mod] [67501.195961] pool 8: cpus=4 node=0 flags=0x0 nice=0 hung=27s workers=3 idle: 129 23765 The root cause for these issues is the way dm-snapshot uses kcopyd. In particular, the lack of an explicit or implicit limit to the maximum number of in-flight COW jobs. The merging path is not affected because it implicitly limits the in-flight kcopyd jobs to one. Fix these issues by using a semaphore to limit the maximum number of in-flight kcopyd jobs. We grab the semaphore before allocating a new kcopyd job in start_copy() and start_full_bio() and release it after the job finishes in copy_callback(). The initial semaphore value is configurable through a module parameter, to allow fine tuning the maximum number of in-flight COW jobs. Setting this parameter to zero initializes the semaphore to INT_MAX. A default value of 2048 maximum in-flight kcopyd jobs was chosen. This value was decided experimentally as a trade-off between memory consumption, stalling the kernel's workqueues and maintaining a high enough throughput. Re-running the aforementioned test: * Workqueue stalls are eliminated * kcopyd's job slab cache uses a maximum of 130MB * The time taken by the test to write to the snapshot-origin target is reduced from 05m20.48s to 03m26.38s [1] https://github.com/jthornber/device-mapper-test-suiteSigned-off-by:
Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by:
Ilias Tsitsimpis <iliastsi@arrikto.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit ece98049 ] At some point we decided not to directly include kernel sources files when building tools/perf/, but when tools/lib/subcmd/ was forked from tools/perf it somehow ended up adding it via these two lines in its Makefile: CFLAGS += -I$(srctree)/include/uapi CFLAGS += -I$(srctree)/include As $(srctree) points to the kernel sources. Removing those lines and keeping just: CFLAGS += -I$(srctree)/tools/include/ Is enough to build tools/perf and tools/objtool. This fixes the build when building from the sources in environments such as the Android NDK crossbuilding from a fedora:26 system: subcmd-util.h:11:15: error: expected ',' or ';' before 'void' static inline void report(const char *prefix, const char *err, va_list params) ^ In file included from /git/perf/include/uapi/linux/stddef.h:2:0, from /git/perf/include/uapi/linux/posix_types.h:5, from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h:36, from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/unistd.h:33, from run-command.c:2: subcmd-util.h:18:17: error: '__no_instrument_function__' attribute applies only to functions The /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h file that includes linux/posix_types.h ends up getting the one in the kernel sources causing the breakage. Fix it. Test built tools/objtool/ too. Reported-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Michael Petlan authored
[ Upstream commit 51433ead ] Some 'perf stat' options do not make sense to be negated (event, cgroup), some do not have negated path implemented (metrics). Due to that, it is better to disable the "no-" prefix for them, since otherwise, the later opt-parsing segfaults. Before: $ perf stat --no-metrics -- ls Segmentation fault (core dumped) After: $ perf stat --no-metrics -- ls Error: option `no-metrics' isn't available Usage: perf stat [<options>] [<command>] Signed-off-by:
Michael Petlan <mpetlan@redhat.com> Tested-by:
-
Nikos Tsironis authored
[ Upstream commit d7e6b8df ] When using kcopyd to run callbacks through dm_kcopyd_do_callback() or submitting copy jobs with a source size of 0, the jobs are pushed directly to the complete_jobs list, which could be under processing by the kcopyd thread. As a result, the kcopyd thread can continue running completed jobs indefinitely, without releasing the CPU, as long as someone keeps submitting new completed jobs through the aforementioned paths. Processing of work items, queued for execution on the same CPU as the currently running kcopyd thread, is thus stalled for excessive amounts of time, hurting performance. Running the following test, from the device mapper test suite [1], dmtest run --suite snapshot -n parallel_io_to_many_snaps_N , with 8 active snapshots, we get, in dmesg, messages like the following: [68899.948523] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 95s! [68899.949282] Showing busy workqueues and worker pools: [68899.949288] workqueue events: flags=0x0 [68899.949295] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256 [68899.949306] pending: vmstat_shepherd, cache_reap [68899.949331] workqueue mm_percpu_wq: flags=0x8 [68899.949337] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 [68899.949345] pending: vmstat_update [68899.949387] workqueue dm_bufio_cache: flags=0x8 [68899.949392] pwq 4: cpus=2 node=0 flags=0x0 nice=0 active=1/256 [68899.949400] pending: work_fn [dm_bufio] [68899.949423] workqueue kcopyd: flags=0x8 [68899.949429] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 [68899.949437] pending: do_work [dm_mod] [68899.949452] workqueue kcopyd: flags=0x8 [68899.949458] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256 [68899.949466] in-flight: 13:do_work [dm_mod] [68899.949474] pending: do_work [dm_mod] [68899.949487] workqueue kcopyd: flags=0x8 [68899.949493] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 [68899.949501] pending: do_work [dm_mod] [68899.949515] workqueue kcopyd: flags=0x8 [68899.949521] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 [68899.949529] pending: do_work [dm_mod] [68899.949541] workqueue kcopyd: flags=0x8 [68899.949547] pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256 [68899.949555] pending: do_work [dm_mod] [68899.949568] pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=95s workers=4 idle: 27130 27223 1084 Fix this by splitting the complete_jobs list into two parts: A user facing part, named callback_jobs, and one used internally by kcopyd, retaining the name complete_jobs. dm_kcopyd_do_callback() and dispatch_job() now push their jobs to the callback_jobs list, which is spliced to the complete_jobs list once, every time the kcopyd thread wakes up. This prevents kcopyd from hogging the CPU indefinitely and causing workqueue stalls. Re-running the aforementioned test: * Workqueue stalls are eliminated * The maximum writing time among all targets is reduced from 09m37.10s to 06m04.85s and the total run time of the test is reduced from 10m43.591s to 7m19.199s [1] https://github.com/jthornber/device-mapper-test-suiteSigned-off-by:
-
AliOS system security authored
[ Upstream commit 8d683dcd ] The iv_offset in the mapping table of crypt target is a 64bit number when IV algorithm is plain64, plain64be, essiv or benbi. It will be assigned to iv_offset of struct crypt_config, cc_sector of struct convert_context and iv_sector of struct dm_crypt_request. These structures members are defined as a sector_t. But sector_t is 32bit when CONFIG_LBDAF is not set in 32bit kernel. In this situation sector_t is not big enough to store the 64bit iv_offset. Here is a reproducer. Prepare test image and device (loop is automatically allocated by cryptsetup): # dd if=/dev/zero of=tst.img bs=1M count=1 # echo "tst"|cryptsetup open --type plain -c aes-xts-plain64 \ --skip 500000000000000000 tst.img test On 32bit system (use IV offset value that overflows to 64bit; CONFIG_LBDAF if off) and device checksum is wrong: # dmsetup table test --showkeys 0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 3551657984 7:0 0 # sha256sum /dev/mapper/test 533e25c09176632b3794f35303488c4a8f3f965dffffa6ec2df347c168cb6c19 /dev/mapper/test On 64bit system (and on 32bit system with the patch), table and checksum is now correct: # dmsetup table test --showkeys 0 2048 crypt aes-xts-plain64 dfa7cfe3c481f2239155739c42e539ae8f2d38f304dcc89d20b26f69daaf0933 500000000000000000 7:0 0 # sha256sum /dev/mapper/test 5d16160f9d5f8c33d8051e65fdb4f003cc31cd652b5abb08f03aa6fce0df75fc /dev/mapper/test Signed-off-by:
AliOS system security <alios_sys_security@linux.alibaba.com> Tested-and-Reviewed-by:
-
Hui Wang authored
[ Upstream commit aa02ef09 ] nr_cpu_ids can be limited on the command line via nr_cpus=. This can break the logical package management because it results in a smaller number of packages while in kdump kernel. Check below case: There is a two sockets system, each socket has 8 cores, which has 16 logical cpus while HT was turn on. 0 1 2 3 4 5 6 7 | 16 17 18 19 20 21 22 23 cores on socket 0 threads on socket 0 8 9 10 11 12 13 14 15 | 24 25 26 27 28 29 30 31 cores on socket 1 threads on socket 1 While starting the kdump kernel with command line option nr_cpus=16 panic was triggered on one of the cpus 24-31 eg. 26, then online cpu will be 1-15, 26(cpu 0 was disabled in kdump), ncpus will be 16 and __max_logical_packages will be 1, but actually two packages were booted on. This issue can reproduced by set kdump option nr_cpus=<real physical core numbers>, and then trigger panic on last socket's thread, for example: taskset -c 26 echo c > /proc/sysrq-trigger Use total_cpus which will not be limited by nr_cpus command line to calculate the value of __max_logical_packages. Signed-off-by:
Hui Wang <john.wanghui@huawei.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: <guijianfeng@huawei.com> Cc: <wencongyang2@huawei.com> Cc: <douliyang1@huawei.com> Cc: <qiaonuohan@huawei.com> Link: https://lkml.kernel.org/r/20181107023643.22174-1-john.wanghui@huawei.comSigned-off-by:
-
Taehee Yoo authored
[ Upstream commit 5a86d68b ] When network namespace is destroyed, cleanup_net() is called. cleanup_net() holds pernet_ops_rwsem then calls each ->exit callback. So that clusterip_tg_destroy() is called by cleanup_net(). And clusterip_tg_destroy() calls unregister_netdevice_notifier(). But both cleanup_net() and clusterip_tg_destroy() hold same lock(pernet_ops_rwsem). hence deadlock occurrs. After this patch, only 1 notifier is registered when module is inserted. And all of configs are added to per-net list. test commands: %ip netns add vm1 %ip netns exec vm1 bash %ip link set lo up %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \ -j CLUSTERIP --new --hashmode sourceip \ --clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1 %exit %ip netns del vm1 splat looks like: [ 341.809674] ============================================ [ 341.809674] WARNING: possible recursive locking detected [ 341.809674] 4.19.0-rc5+ #16 Tainted: G W [ 341.809674] -------------------------------------------- [ 341.809674] kworker/u4:2/87 is trying to acquire lock: [ 341.809674] 000000005da2d519 (pernet_ops_rwsem){++++}, at: unregister_netdevice_notifier+0x8c/0x460 [ 341.809674] [ 341.809674] but task is already holding lock: [ 341.809674] 000000005da2d519 (pernet_ops_rwsem){++++}, at: cleanup_net+0x119/0x900 [ 341.809674] [ 341.809674] other info that might help us debug this: [ 341.809674] Possible unsafe locking scenario: [ 341.809674] [ 341.809674] CPU0 [ 341.809674] ---- [ 341.809674] lock(pernet_ops_rwsem); [ 341.809674] lock(pernet_ops_rwsem); [ 341.809674] [ 341.809674] *** DEADLOCK *** [ 341.809674] [ 341.809674] May be due to missing lock nesting notation [ 341.809674] [ 341.809674] 3 locks held by kworker/u4:2/87: [ 341.809674] #0: 00000000d9df6c92 ((wq_completion)"%s""netns"){+.+.}, at: process_one_work+0xafe/0x1de0 [ 341.809674] #1: 00000000c2cbcee2 (net_cleanup_work){+.+.}, at: process_one_work+0xb60/0x1de0 [ 341.809674] #2: 000000005da2d519 (pernet_ops_rwsem){++++}, at: cleanup_net+0x119/0x900 [ 341.809674] [ 341.809674] stack backtrace: [ 341.809674] CPU: 1 PID: 87 Comm: kworker/u4:2 Tainted: G W 4.19.0-rc5+ #16 [ 341.809674] Workqueue: netns cleanup_net [ 341.809674] Call Trace: [ ... ] [ 342.070196] down_write+0x93/0x160 [ 342.070196] ? unregister_netdevice_notifier+0x8c/0x460 [ 342.070196] ? down_read+0x1e0/0x1e0 [ 342.070196] ? sched_clock_cpu+0x126/0x170 [ 342.070196] ? find_held_lock+0x39/0x1c0 [ 342.070196] unregister_netdevice_notifier+0x8c/0x460 [ 342.070196] ? register_netdevice_notifier+0x790/0x790 [ 342.070196] ? __local_bh_enable_ip+0xe9/0x1b0 [ 342.070196] ? __local_bh_enable_ip+0xe9/0x1b0 [ 342.070196] ? clusterip_tg_destroy+0x372/0x650 [ipt_CLUSTERIP] [ 342.070196] ? trace_hardirqs_on+0x93/0x210 [ 342.070196] ? __bpf_trace_preemptirq_template+0x10/0x10 [ 342.070196] ? clusterip_tg_destroy+0x372/0x650 [ipt_CLUSTERIP] [ 342.123094] clusterip_tg_destroy+0x3ad/0x650 [ipt_CLUSTERIP] [ 342.123094] ? clusterip_net_init+0x3d0/0x3d0 [ipt_CLUSTERIP] [ 342.123094] ? cleanup_match+0x17d/0x200 [ip_tables] [ 342.123094] ? xt_unregister_table+0x215/0x300 [x_tables] [ 342.123094] ? kfree+0xe2/0x2a0 [ 342.123094] cleanup_entry+0x1d5/0x2f0 [ip_tables] [ 342.123094] ? cleanup_match+0x200/0x200 [ip_tables] [ 342.123094] __ipt_unregister_table+0x9b/0x1a0 [ip_tables] [ 342.123094] iptable_filter_net_exit+0x43/0x80 [iptable_filter] [ 342.123094] ops_exit_list.isra.10+0x94/0x140 [ 342.123094] cleanup_net+0x45b/0x900 [ ... ] Fixes: 202f59af ("netfilter: ipt_CLUSTERIP: do not hold dev") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit b12f7bad ] When network namespace is destroyed, both clusterip_tg_destroy() and clusterip_net_exit() are called. and clusterip_net_exit() is called before clusterip_tg_destroy(). Hence cleanup check code in clusterip_net_exit() doesn't make sense. test commands: %ip netns add vm1 %ip netns exec vm1 bash %ip link set lo up %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \ -j CLUSTERIP --new --hashmode sourceip \ --clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1 %exit %ip netns del vm1 splat looks like: [ 341.184508] WARNING: CPU: 1 PID: 87 at net/ipv4/netfilter/ipt_CLUSTERIP.c:840 clusterip_net_exit+0x319/0x380 [ipt_CLUSTERIP] [ 341.184850] Modules linked in: ipt_CLUSTERIP nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_tcpudp iptable_filter bpfilter ip_tables x_tables [ 341.184850] CPU: 1 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc5+ #16 [ 341.227509] Workqueue: netns cleanup_net [ 341.227509] RIP: 0010:clusterip_net_exit+0x319/0x380 [ipt_CLUSTERIP] [ 341.227509] Code: 0f 85 7f fe ff ff 48 c7 c2 80 64 2c c0 be a8 02 00 00 48 c7 c7 a0 63 2c c0 c6 05 18 6e 00 00 01 e8 bc 38 ff f5 e9 5b fe ff ff <0f> 0b e9 33 ff ff ff e8 4b 90 50 f6 e9 2d fe ff ff 48 89 df e8 de [ 341.227509] RSP: 0018:ffff88011086f408 EFLAGS: 00010202 [ 341.227509] RAX: dffffc0000000000 RBX: 1ffff1002210de85 RCX: 0000000000000000 [ 341.227509] RDX: 1ffff1002210de85 RSI: ffff880110813be8 RDI: ffffed002210de58 [ 341.227509] RBP: ffff88011086f4d0 R08: 0000000000000000 R09: 0000000000000000 [ 341.227509] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff1002210de81 [ 341.227509] R13: ffff880110625a48 R14: ffff880114cec8c8 R15: 0000000000000014 [ 341.227509] FS: 0000000000000000(0000) GS:ffff880116600000(0000) knlGS:0000000000000000 [ 341.227509] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 341.227509] CR2: 00007f11fd38e000 CR3: 000000013ca16000 CR4: 00000000001006e0 [ 341.227509] Call Trace: [ 341.227509] ? __clusterip_config_find+0x460/0x460 [ipt_CLUSTERIP] [ 341.227509] ? default_device_exit+0x1ca/0x270 [ 341.227509] ? remove_proc_entry+0x1cd/0x390 [ 341.227509] ? dev_change_net_namespace+0xd00/0xd00 [ 341.227509] ? __init_waitqueue_head+0x130/0x130 [ 341.227509] ops_exit_list.isra.10+0x94/0x140 [ 341.227509] cleanup_net+0x45b/0x900 [ ... ] Fixes: 613d0776 ("netfilter: exit_net cleanup check added") Signed-off-by:
-
Taehee Yoo authored
[ Upstream commit 06aa151a ] If same destination IP address config is already existing, that config is just used. MAC address also should be same. However, there is no MAC address checking routine. So that MAC address checking routine is added. test commands: %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \ -j CLUSTERIP --new --hashmode sourceip \ --clustermac 01:00:5e:00:00:20 --total-nodes 2 --local-node 1 %iptables -A INPUT -p tcp -i lo -d 192.168.0.5 --dport 80 \ -j CLUSTERIP --new --hashmode sourceip \ --clustermac 01:00:5e:00:00:21 --total-nodes 2 --local-node 1 After this patch, above commands are disallowed. Signed-off-by:
-
Andi Kleen authored
[ Upstream commit 91b2b970 ] Fix incorrect event names for the Load_Miss_Real_Latency metric for Skylake and Skylake Server. Fixes https://github.com/andikleen/pmu-tools/issues/158 Before: % perf stat -M Load_Miss_Real_Latency true event syntax error: '..ss.pending,mem_load_retired.l1_miss_ps,mem_load_retired.fb_hit_ps}:W' \___ parser error Usage: perf stat [<options>] [<command>] -M, --metrics <metric/metric group list> monitor specified metrics or metric groups (separated by ,) After: % perf stat -M Load_Miss_Real_Latency true Performance counter stats for 'true': 279,204 l1d_pend_miss.pending # 14.0 Load_Miss_Real_Latency 4,784 mem_load_uops_retired.l1_miss 15,188 mem_load_uops_retired.hit_lfb 0.000899640 seconds time elapsed Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit bd8d57fb ] The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: util/parse-events.c: In function 'print_symbol_events': util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation] strncpy(name, syms->symbol, MAX_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'print_symbol_events.constprop', inlined from 'print_events' at util/parse-events.c:2508:2: util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation] strncpy(name, syms->symbol, MAX_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'print_symbol_events.constprop', inlined from 'print_events' at util/parse-events.c:2511:2: util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation] strncpy(name, syms->symbol, MAX_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 947b4ad1 ("perf list: Fix max event string size") Link: https://lkml.kernel.org/n/tip-b663e33bm6x8hrkie4uxh7u2@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 2f530253 ] The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. In this specific case this would only happen if fgets() was buggy, as its man page states that it should read one less byte than the size of the destination buffer, so that it can put the nul byte at the end of it, so it would never copy 255 non-nul chars, as fgets reads into the orig buffer at most 254 non-nul chars and terminates it. But lets just switch to strlcpy to keep the original intent and silence the gcc 8.2 warning. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: In function 'cpu_model', inlined from 'svg_cpu_box' at util/svghelper.c:378:2: util/svghelper.c:337:5: error: 'strncpy' output may be truncated copying 255 bytes from a string of length 255 [-Werror=stringop-truncation] strncpy(cpu_m, &buf[13], 255); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Fixes: f48d55ce ("perf: Add a SVG helper library file") Link: https://lkml.kernel.org/n/tip-xzkoo0gyr56gej39ltivuh9g@git.kernel.orgSigned-off-by:
-
Florian Fainelli authored
[ Upstream commit 24f96733 ] The breakpoint tests on the ARM 32-bit kernel are broken in several ways. The breakpoint length requested does not necessarily match whether the function address has the Thumb bit (bit 0) set or not, and this does matter to the ARM kernel hw_breakpoint infrastructure. See [1] for background. [1]: https://lkml.org/lkml/2018/11/15/205 As Will indicated, the overflow handling would require single-stepping which is not supported at the moment. Just disable those tests for the ARM 32-bit platforms and update the comment above to explain these limitations. Co-developed-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181203191138.2419-1-f.fainelli@gmail.comSigned-off-by:
-
Adrian Hunter authored
[ Upstream commit 1c6f709b ] Users should never use 'pt=0', but if they do it may give a meaningless error: $ perf record -e intel_pt/pt=0/u uname Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u). Fix that by forcing 'pt=1'. Committer testing: # perf record -e intel_pt/pt=0/u uname Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (intel_pt/pt=0/u). /bin/dmesg | grep -i perf may provide additional information. # perf record -e intel_pt/pt=0/u uname pt=0 doesn't make sense, forcing pt=1 Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data ] # Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
-
Sergey Senozhatsky authored
[ Upstream commit d7240214 ] LKP has hit yet another circular locking dependency between uart console drivers and debugobjects [1]: CPU0 CPU1 rhltable_init() __init_work() debug_object_init uart_shutdown() /* db->lock */ /* uart_port->lock */ debug_print_object() free_page() printk() call_console_drivers() debug_check_no_obj_freed() /* uart_port->lock */ /* db->lock */ debug_print_object() So there are two dependency chains: uart_port->lock -> db->lock And db->lock -> uart_port->lock This particular circular locking dependency can be addressed in several ways: a) One way would be to move debug_print_object() out of db->lock scope and, thus, break the db->lock -> uart_port->lock chain. b) Another one would be to free() transmit buffer page out of db->lock in UART code; which is what this patch does. It makes sense to apply a) and b) independently: there are too many things going on behind free(), none of which depend on uart_port->lock. The patch fixes transmit buffer page free() in uart_shutdown() and, additionally, in uart_port_startup() (as was suggested by Dmitry Safonov). [1] https://lore.kernel.org/lkml/20181211091154.GL23332@shao2-debian/T/#uSigned-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by:
Petr Mladek <pmladek@suse.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Waiman Long <longman@redhat.com> Cc: Dmitry Safonov <dima@arista.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Johannes Thumshirn authored
[ Upstream commit 1690dd41 ] In the error handling block, err holds the return value of either btrfs_del_root_ref() or btrfs_del_inode_ref() but it hasn't been checked since it's introduction with commit fe66a05a (Btrfs: improve error handling for btrfs_insert_dir_item callers) in 2012. If the error handling in the error handling fails, there's not much left to do and the abort either happened earlier in the callees or is necessary here. So if one of btrfs_del_root_ref() or btrfs_del_inode_ref() failed, abort the transaction, but still return the original code of the failure stored in 'ret' as this will be reported to the user. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Anand Jain authored
[ Upstream commit d189dd70 ] The device replace cancel thread can race with the replace start thread and if fs_info::scrubs_running is not yet set, btrfs_scrub_cancel() will fail to stop the scrub thread. The scrub thread continues with the scrub for replace which then will try to write to the target device and which is already freed by the cancel thread. scrub_setup_ctx() warns as tgtdev is NULL. struct scrub_ctx *scrub_setup_ctx(struct btrfs_device *dev, int is_dev_replace) { ... if (is_dev_replace) { WARN_ON(!fs_info->dev_replace.tgtdev); <=== sctx->pages_per_wr_bio = SCRUB_PAGES_PER_WR_BIO; sctx->wr_tgtdev = fs_info->dev_replace.tgtdev; sctx->flush_all_writes = false; } [ 6724.497655] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc started [ 6753.945017] BTRFS info (device sdb): dev_replace from /dev/sdb (devid 1) to /dev/sdc canceled [ 6852.426700] WARNING: CPU: 0 PID: 4494 at fs/btrfs/scrub.c:622 scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.428928] RIP: 0010:scrub_setup_ctx.isra.19+0x220/0x230 [btrfs] ... [ 6852.432970] Call Trace: [ 6852.433202] btrfs_scrub_dev+0x19b/0x5c0 [btrfs] [ 6852.433471] btrfs_dev_replace_start+0x48c/0x6a0 [btrfs] [ 6852.433800] btrfs_dev_replace_by_ioctl+0x3a/0x60 [btrfs] [ 6852.434097] btrfs_ioctl+0x2476/0x2d20 [btrfs] [ 6852.434365] ? do_sigaction+0x7d/0x1e0 [ 6852.434623] do_vfs_ioctl+0xa9/0x6c0 [ 6852.434865] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435124] ? syscall_trace_enter+0x1c8/0x310 [ 6852.435387] ksys_ioctl+0x60/0x90 [ 6852.435663] __x64_sys_ioctl+0x16/0x20 [ 6852.435907] do_syscall_64+0x50/0x180 [ 6852.436150] entry_SYSCALL_64_after_hwframe+0x49/0xbe Further, as the replace thread enters scrub_write_page_to_dev_replace() without the target device it panics: static int scrub_add_page_to_wr_bio(struct scrub_ctx *sctx, struct scrub_page *spage) { ... bio_set_dev(bio, sbio->dev->bdev); <====== [ 6929.715145] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 .. [ 6929.717106] Workqueue: btrfs-scrub btrfs_scrub_helper [btrfs] [ 6929.717420] RIP: 0010:scrub_write_page_to_dev_replace+0xb4/0x260 [btrfs] .. [ 6929.721430] Call Trace: [ 6929.721663] scrub_write_block_to_dev_replace+0x3f/0x60 [btrfs] [ 6929.721975] scrub_bio_end_io_worker+0x1af/0x490 [btrfs] [ 6929.722277] normal_work_helper+0xf0/0x4c0 [btrfs] [ 6929.722552] process_one_work+0x1f4/0x520 [ 6929.722805] ? process_one_work+0x16e/0x520 [ 6929.723063] worker_thread+0x46/0x3d0 [ 6929.723313] kthread+0xf8/0x130 [ 6929.723544] ? process_one_work+0x520/0x520 [ 6929.723800] ? kthread_delayed_work_timer_fn+0x80/0x80 [ 6929.724081] ret_from_fork+0x3a/0x50 Fix this by letting the btrfs_dev_replace_finishing() to do the job of cleaning after the cancel, including freeing of the target device. btrfs_dev_replace_finishing() is called when btrfs_scub_dev() returns along with the scrub return status. Signed-off-by:
Anand Jain <anand.jain@oracle.com> Reviewed-by:
-
Hans van Kranenburg authored
[ Upstream commit baf92114 ] Commit 92e222df "btrfs: alloc_chunk: fix DUP stripe size handling" fixed calculating the stripe_size for a new DUP chunk. However, the same calculation reappears a bit later, and that one was not changed yet. The resulting bug that is exposed is that the newly allocated device extents ('stripes') can have a few MiB overlap with the next thing stored after them, which is another device extent or the end of the disk. The scenario in which this can happen is: * The block device for the filesystem is less than 10GiB in size. * The amount of contiguous free unallocated disk space chosen to use for chunk allocation is 20% of the total device size, or a few MiB more or less. An example: - The filesystem device is 7880MiB (max_chunk_size gets set to 788MiB) - There's 1578MiB unallocated raw disk space left in one contiguous piece. In this case stripe_size is first calculated as 789MiB, (half of 1578MiB). Since 789MiB (stripe_size * data_stripes) > 788MiB (max_chunk_size), we enter the if block. Now stripe_size value is immediately overwritten while calculating an adjusted value based on max_chunk_size, which ends up as 788MiB. Next, the value is rounded up to a 16MiB boundary, 800MiB, which is actually more than the value we had before. However, the last comparison fails to detect this, because it's comparing the value with the total amount of free space, which is about twice the size of stripe_size. In the example above, this means that the resulting raw disk space being allocated is 1600MiB, while only a gap of 1578MiB has been found. The second device extent object for this DUP chunk will overlap for 22MiB with whatever comes next. The underlying problem here is that the stripe_size is reused all the time for different things. So, when entering the code in the if block, stripe_size is immediately overwritten with something else. If later we decide we want to have the previous value back, then the logic to compute it was copy pasted in again. With this change, the value in stripe_size is not unnecessarily destroyed, so the duplicated calculation is not needed any more. Signed-off-by:
Hans van Kranenburg <hans.van.kranenburg@mendix.com> Signed-off-by:
-
Qu Wenruo authored
[ Upstream commit 5eb19381 ] Enhance btrfs_verify_dev_extents() to remember previous checked dev extents, so it can verify no dev extents can overlap. Analysis from Hans: "Imagine allocating a DATA|DUP chunk. In the chunk allocator, we first set... max_stripe_size = SZ_1G; max_chunk_size = BTRFS_MAX_DATA_CHUNK_SIZE ... which is 10GiB. Then... /* we don't want a chunk larger than 10% of writeable space */ max_chunk_size = min(div_factor(fs_devices->total_rw_bytes, 1), max_chunk_size); Imagine we only have one 7880MiB block device in this filesystem. Now max_chunk_size is down to 788MiB. The next step in the code is to search for max_stripe_size * dev_stripes amount of free space on the device, which is in our example 1GiB * 2 = 2GiB. Imagine the device has exactly 1578MiB free in one contiguous piece. This amount of bytes will be put in devices_info[ndevs - 1].max_avail Next we recalculate the stripe_size (which is actually the device extent length), based on the actual maximum amount of available raw disk space: stripe_size = div_u64(devices_info[ndevs - 1].max_avail, dev_stripes); stripe_size is now 789MiB Next we do... data_stripes = num_stripes / ncopies ...where data_stripes ends up as 1, because num_stripes is 2 (the amount of device extents we're going to have), and DUP has ncopies 2. Next there's a check... if (stripe_size * data_stripes > max_chunk_size) ...which matches because 789MiB * 1 > 788MiB. We go into the if code, and next is... stripe_size = div_u64(max_chunk_size, data_stripes); ...which resets stripe_size to max_chunk_size: 788MiB Next is a fun one... /* bump the answer up to a 16MB boundary */ stripe_size = round_up(stripe_size, SZ_16M); ...which changes stripe_size from 788MiB to 800MiB. We're not done changing stripe_size yet... /* But don't go higher than the limits we found while searching * for free extents */ stripe_size = min(devices_info[ndevs - 1].max_avail, stripe_size); This is bad. max_avail is twice the stripe_size (we need to fit 2 device extents on the same device for DUP). The result here is that 800MiB < 1578MiB, so it's unchanged. However, the resulting DUP chunk will need 1600MiB disk space, which isn't there, and the second dev_extent might extend into the next thing (next dev_extent? end of device?) for 22MiB. The last shown line of code relies on a situation where there's twice the value of stripe_size present as value for the variable stripe_size when it's DUP. This was actually the case before commit 92e222df "btrfs: alloc_chunk: fix DUP stripe size handling", from which I quote: "[...] in the meantime there's a check to see if the stripe_size does not exceed max_chunk_size. Since during this check stripe_size is twice the amount as intended, the check will reduce the stripe_size to max_chunk_size if the actual correct to be used stripe_size is more than half the amount of max_chunk_size." In the previous version of the code, the 16MiB alignment (why is this done, by the way?) would result in a 50% chance that it would actually do an 8MiB alignment for the individual dev_extents, since it was operating on double the size. Does this matter? Does it matter that stripe_size can be set to anything which is not 16MiB aligned because of the amount of remaining available disk space which is just taken? What is the main purpose of this round_up? The most straightforward thing to do seems something like... stripe_size = min( div_u64(devices_info[ndevs - 1].max_avail, dev_stripes), stripe_size ) ..just putting half of the max_avail into stripe_size." Link: https://lore.kernel.org/linux-btrfs/b3461a38-e5f8-f41d-c67c-2efac8129054@mendix.com/Reported-by:
Qu Wenruo <wqu@suse.com> [ add analysis from report ] Signed-off-by:
-
Jonas Danielsson authored
[ Upstream commit ae460c11 ] On our AT91SAM9260 board we use the same sdio bus for wifi and for the sd card slot. This caused the atmel-mci to give the following splat on the serial console: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 538 at drivers/mmc/host/atmel-mci.c:859 atmci_send_command+0x24/0x44 Modules linked in: CPU: 0 PID: 538 Comm: mmcqd/0 Not tainted 4.14.76 #14 Hardware name: Atmel AT91SAM9 [<c000fccc>] (unwind_backtrace) from [<c000d3dc>] (show_stack+0x10/0x14) [<c000d3dc>] (show_stack) from [<c0017644>] (__warn+0xd8/0xf4) [<c0017644>] (__warn) from [<c0017704>] (warn_slowpath_null+0x1c/0x24) [<c0017704>] (warn_slowpath_null) from [<c033bb9c>] (atmci_send_command+0x24/0x44) [<c033bb9c>] (atmci_send_command) from [<c033e984>] (atmci_start_request+0x1f4/0x2dc) [<c033e984>] (atmci_start_request) from [<c033f3b4>] (atmci_request+0xf0/0x164) [<c033f3b4>] (atmci_request) from [<c0327108>] (mmc_start_request+0x280/0x2d0) [<c0327108>] (mmc_start_request) from [<c032800c>] (mmc_start_areq+0x230/0x330) [<c032800c>] (mmc_start_areq) from [<c03366f8>] (mmc_blk_issue_rw_rq+0xc4/0x310) [<c03366f8>] (mmc_blk_issue_rw_rq) from [<c03372c4>] (mmc_blk_issue_rq+0x118/0x5ac) [<c03372c4>] (mmc_blk_issue_rq) from [<c033781c>] (mmc_queue_thread+0xc4/0x118) [<c033781c>] (mmc_queue_thread) from [<c002daf8>] (kthread+0x100/0x118) [<c002daf8>] (kthread) from [<c000a580>] (ret_from_fork+0x14/0x34) ---[ end trace 594371ddfa284bd6 ]--- This is: WARN_ON(host->cmd); This was fixed on our board by letting atmci_request_end determine what state we are in. Instead of unconditionally setting it to STATE_IDLE on STATE_END_REQUEST. Signed-off-by:
Jonas Danielsson <jonas@orbital-systems.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit fbac5977 ] An unterminated string literal followed by new line is passed to the parser (with "multi-line strings not supported" warning shown), then handled properly there. On the other hand, an unterminated string literal at end of file is never passed to the parser, then results in memory leak. [Test Code] ----------(Kconfig begin)---------- source "Kconfig.inc" config A bool "a" -----------(Kconfig end)----------- --------(Kconfig.inc begin)-------- config B bool "b\No new line at end of file ---------(Kconfig.inc end)--------- [Summary from Valgrind] Before the fix: LEAK SUMMARY: definitely lost: 16 bytes in 1 blocks ... After the fix: LEAK SUMMARY: definitely lost: 0 bytes in 0 blocks ... Eliminate the memory leak path by handling this case. Of course, such a Kconfig file is wrong already, so I will add an error message later. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
[ Upstream commit 77c1c0fa ] Currently, warn_ignore_character() displays invalid file name and line number. The lexer should use current_file->name and yylineno, while the parser should use zconf_curname() and zconf_lineno(). This difference comes from that the lexer is always going ahead of the parser. The parser needs to look ahead one token to make a shift/reduce decision, so the lexer is requested to scan more text from the input file. This commit fixes the warning message from warn_ignored_character(). [Test Code] ----(Kconfig begin)---- / -----(Kconfig end)----- [Output] Before the fix: <none>:0:warning: ignoring unsupported character '/' After the fix: Kconfig:1:warning: ignoring unsupported character '/' Signed-off-by:
-
Jiong Wang authored
[ Upstream commit e434b8cd ] Currently, the destination register is marked as unknown for 32-bit sub-register move (BPF_MOV | BPF_ALU) whenever the source register type is SCALAR_VALUE. This is too conservative that some valid cases will be rejected. Especially, this may turn a constant scalar value into unknown value that could break some assumptions of verifier. For example, test_l4lb_noinline.c has the following C code: struct real_definition *dst 1: if (!get_packet_dst(&dst, &pckt, vip_info, is_ipv6)) 2: return TC_ACT_SHOT; 3: 4: if (dst->flags & F_IPV6) { get_packet_dst is responsible for initializing "dst" into valid pointer and return true (1), otherwise return false (0). The compiled instruction sequence using alu32 will be: 412: (54) (u32) r7 &= (u32) 1 413: (bc) (u32) r0 = (u32) r7 414: (95) exit insn 413, a BPF_MOV | BPF_ALU, however will turn r0 into unknown value even r7 contains SCALAR_VALUE 1. This causes trouble when verifier is walking the code path that hasn't initialized "dst" inside get_packet_dst, for which case 0 is returned and we would then expect verifier concluding line 1 in the above C code pass the "if" check, therefore would skip fall through path starting at line 4. Now, because r0 returned from callee has became unknown value, so verifier won't skip analyzing path starting at line 4 and "dst->flags" requires dereferencing the pointer "dst" which actually hasn't be initialized for this path. This patch relaxed the code marking sub-register move destination. For a SCALAR_VALUE, it is safe to just copy the value from source then truncate it into 32-bit. A unit test also included to demonstrate this issue. This test will fail before this patch. This relaxation could let verifier skipping more paths for conditional comparison against immediate. It also let verifier recording a more accurate/strict value for one register at one state, if this state end up with going through exit without rejection and it is used for state comparison later, then it is possible an inaccurate/permissive value is better. So the real impact on verifier processed insn number is complex. But in all, without this fix, valid program could be rejected. >From real benchmarking on kernel selftests and Cilium bpf tests, there is no impact on processed instruction number when tests ares compiled with default compilation options. There is slightly improvements when they are compiled with -mattr=+alu32 after this patch. Also, test_xdp_noinline/-mattr=+alu32 now passed verification. It is rejected before this fix. Insn processed before/after this patch: default -mattr=+alu32 Kernel selftest === test_xdp.o 371/371 369/369 test_l4lb.o 6345/6345 5623/5623 test_xdp_noinline.o 2971/2971 rejected/2727 test_tcp_estates.o 429/429 430/430 Cilium bpf === bpf_lb-DLB_L3.o: 2085/2085 1685/1687 bpf_lb-DLB_L4.o: 2287/2287 1986/1982 bpf_lb-DUNKNOWN.o: 690/690 622/622 bpf_lxc.o: 95033/95033 N/A bpf_netdev.o: 7245/7245 N/A bpf_overlay.o: 2898/2898 3085/2947 NOTE: - bpf_lxc.o and bpf_netdev.o compiled by -mattr=+alu32 are rejected by verifier due to another issue inside verifier on supporting alu32 binary. - Each cilium bpf program could generate several processed insn number, above number is sum of them. v1->v2: - Restrict the change on SCALAR_VALUE. - Update benchmark numbers on Cilium bpf tests. Signed-off-by:
Jiong Wang <jiong.wang@netronome.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Will Deacon authored
[ Upstream commit 33309ecd ] The dcache_by_line_op macro suffers from a couple of small problems: First, the GAS directives that are currently being used rely on assembler behavior that is not documented, and probably not guaranteed to produce the correct behavior going forward. As a result, we end up with some undefined symbols in cache.o: $ nm arch/arm64/mm/cache.o ... U civac ... U cvac U cvap U cvau This is due to the fact that the comparisons used to select the operation type in the dcache_by_line_op macro are comparing symbols not strings, and even though it seems that GAS is doing the right thing here (undefined symbols by the same name are equal to each other), it seems unwise to rely on this. Second, when patching in a DC CVAP instruction on CPUs that support it, the fallback path consists of a DC CVAU instruction which may be affected by CPU errata that require ARM64_WORKAROUND_CLEAN_CACHE. Solve these issues by unrolling the various maintenance routines and using the conditional directives that are documented as operating on strings. To avoid the complexity of nested alternatives, we move the DC CVAP patching to __clean_dcache_area_pop, falling back to a branch to __clean_dcache_area_poc if DCPOP is not supported by the CPU. Reported-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Suggested-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
