Daniel Borkmann says:

====================
This set contains three fixes that are mostly JIT and set_memory_*()
related. The third in the series in particular fixes the syzkaller
bugs that were still pending; aside from local reproduction & testing,
also 'syz test' wasn't able to trigger them anymore. I've tested this
series on x86_64, arm64 and s390x, and kbuild bot wasn't yelling either
for the rest. For details, please see patches as usual, thanks!
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Partially undo commit 9facc336 ("bpf: reject any prog that failed
read-only lock") since it caused a regression, that is, syzkaller was
able to manage to cause a panic via fault injection deep in set_memory_ro()
path by letting an allocation fail: In x86's __change_page_attr_set_clr()
it was able to change the attributes of the primary mapping but not in
the alias mapping via cpa_process_alias(), so the second, inner call
to the __change_page_attr() via __change_page_attr_set_clr() had to split
a larger page and failed in the alloc_pages() with the artifically triggered
allocation error which is then propagated down to the call site.

Thus, for set_memory_ro() this means that it returned with an error, but
from debugging a probe_kernel_write() revealed EFAULT on that memory since
the primary mapping succeeded to get changed. Therefore the subsequent
hdr->locked = 0 reset triggered the panic as it was performed on read-only
memory, so call-site assumptions were infact wrong to assume that it would
either succeed /or/ not succeed at all since there's no such rollback in
set_memory_*() calls from partial change of mappings, in other words, we're
left in a state that is "half done". A later undo via set_memory_rw() is
succeeding though due to matching permissions on that part (aka due to the
try_preserve_large_page() succeeding). While reproducing locally with
explicitly triggering this error, the initial splitting only happens on
rare occasions and in real world it would additionally need oom conditions,
but that said, it could partially fail. Therefore, it is definitely wrong
to bail out on set_memory_ro() error and reject the program with the
set_memory_*() semantics we have today. Shouldn't have gone the extra mile
since no other user in tree today infact checks for any set_memory_*()
errors, e.g. neither module_enable_ro() / module_disable_ro() for module
RO/NX handling which is mostly default these days nor kprobes core with
alloc_insn_page() / free_insn_page() as examples that could be invoked long
after bootup and original 314beb9b ("x86: bpf_jit_comp: secure bpf jit
against spraying attacks") did neither when it got first introduced to BPF
so "improving" with bailing out was clearly not right when set_memory_*()
cannot handle it today.

Kees suggested that if set_memory_*() can fail, we should annotate it with
__must_check, and all callers need to deal with it gracefully given those
set_memory_*() markings aren't "advisory", but they're expected to actually
do what they say. This might be an option worth to move forward in future
but would at the same time require that set_memory_*() calls from supporting
archs are guaranteed to be "atomic" in that they provide rollback if part
of the range fails, once that happened, the transition from RW -> RO could
be made more robust that way, while subsequent RO -> RW transition /must/
continue guaranteeing to always succeed the undo part.

Reported-by: syzbot+a4eb8c7766952a1ca872@syzkaller.appspotmail.com
Reported-by: syzbot+d866d1925855328eac3b@syzkaller.appspotmail.com
Fixes: 9facc336 ("bpf: reject any prog that failed read-only lock")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

If we would ever fail in the bpf_jit_prog() pass that writes the
actual insns to the image after we got header via bpf_jit_binary_alloc()
then we also need to make sure to free it through bpf_jit_binary_free()
again when bailing out. Given we had prior bpf_jit_prog() passes to
initially probe for clobbered registers, program size and to fill in
addrs arrray for jump targets, this is more of a theoretical one,
but at least make sure this doesn't break with future changes.

Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Any eBPF JIT that where its underlying arch supports ARCH_HAS_SET_MEMORY
would need to use bpf_jit_binary_{un,}lock_ro() pair instead of the
set_memory_{ro,rw}() pair directly as otherwise changes to the former
might break. arm32's eBPF conversion missed to change it, so fix this
up here.

Fixes: 39c13c20 ("arm: eBPF JIT compiler")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

For ACLs implemented using either FIB rules or FIB entries, the BPF
program needs the FIB lookup status to be able to drop the packet.
Since the bpf_fib_lookup API has not reached a released kernel yet,
change the return code to contain an encoding of the FIB lookup
result and return the nexthop device index in the params struct.

In addition, inform the BPF program of any post FIB lookup reason as
to why the packet needs to go up the stack.

The fib result for unicast routes must have an egress device, so remove
the check that it is non-NULL.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Flag with FLAG_EXPECTED_FAIL the BPF_MAXINSNS tests that cannot be jited
on s390 because they exceed BPF_SIZE_MAX and fail when
CONFIG_BPF_JIT_ALWAYS_ON is set. Also set .expected_errcode to -ENOTSUPP
so the tests pass in that case.
Signed-off-by: Kleber Sacilotto de Souza <kleber.souza@canonical.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This test needs root privilege for it's successful execution.

This patch is atleast used to notify the user about the privilege
the script demands for the  smooth execution of the test.
Signed-off-by: Jeffrin Jose T (Rajagiri SET) <ahiliation@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The test_lirc_mode2.sh script require root privilege for the successful
execution of the test.

This patch is to notify the user about the privilege the script
demands for the successful execution of the test.
Signed-off-by: Jeffrin Jose T (Rajagiri SET) <ahiliation@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

CONFIG_NET_SCHED wasn't enabled in arm64's defconfig only for x86.

So bpf/test_tunnel.sh tests fails with:

  RTNETLINK answers: Operation not supported
  RTNETLINK answers: Operation not supported
  We have an error talking to the kernel, -1

Enable NET_SCHED and more tests pass.

Fixes: 3bce593a ("selftests: bpf: config: add config fragments")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

If the kernel is compiled with CONFIG_CGROUP_BPF not enabled, it is not
possible to attach, detach or query IR BPF programs to /dev/lircN devices,
making them impossible to use. For embedded devices, it should be possible
to use IR decoding without cgroups or CONFIG_CGROUP_BPF enabled.

This change requires some refactoring, since bpf_prog_{attach,detach,query}
functions are now always compiled, but their code paths for cgroups need
moving out. Rather than a #ifdef CONFIG_CGROUP_BPF in kernel/bpf/syscall.c,
moving them to kernel/bpf/cgroup.c and kernel/bpf/sockmap.c does not
require #ifdefs since that is already conditionally compiled.

Fixes: f4364dcf ("media: rc: introduce BPF_PROG_LIRC_MODE2")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Stopping offload completely if replace of program failed dates
back to days of transparent offload.  Back then we wanted to
silently fall back to the in-driver processing.  Today we mark
programs for offload when they are loaded into the kernel, so
the transparent offload is no longer a reality.

Flags check in the driver will only allow replace of a driver
program with another driver program or an offload program with
another offload program.

When driver program is replaced stopping offload is a no-op,
because driver program isn't offloaded.  When replacing
offloaded program if the offload fails the entire operation
will fail all the way back to user space and we should continue
using the old program.  IOW when replacing a driver program
stopping offload is unnecessary and when replacing offloaded
program - it's a bug, old program should continue to run.

In practice this bug would mean that if offload operation was to
fail (either due to FW communication error, kernel OOM or new
program being offloaded but for a different netdev) driver
would continue reporting that previous XDP program is offloaded
but in fact no program will be loaded in hardware.  The failure
is fairly unlikely (found by inspection, when working on the code)
but it's unpleasant.

Backport note: even though the bug was introduced in commit
cafa92ac ("nfp: bpf: add support for XDP_FLAGS_HW_MODE"),
this fix depends on commit 441a3303 ("net: xdp: don't allow
device-bound programs in driver mode"), so this fix is sufficient
only in v4.15 or newer.  Kernels v4.13.x and v4.14.x do need to
stop offload if it was transparent/opportunistic, i.e. if
XDP_FLAGS_HW_MODE was not set on running program.

Fixes: cafa92ac ("nfp: bpf: add support for XDP_FLAGS_HW_MODE")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

On one of our production test machine, when running
bpf selftest test_sockmap, I got the following error:
  # sudo ./test_sockmap
  libbpf: failed to create map (name: 'sock_map'): Operation not permitted
  libbpf: failed to load object 'test_sockmap_kern.o'
  libbpf: Can't get the 0th fd from program sk_skb1: only -1 instances
  ......
  load_bpf_file: (-1) Operation not permitted
  ERROR: (-1) load bpf failed

The error is due to not-big-enough rlimit
  struct rlimit r = {10 * 1024 * 1024, RLIM_INFINITY};

The test already includes "bpf_rlimit.h", which sets current
and max rlimit to RLIM_INFINITY. Let us just use it.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The test_kmod.sh script require root privilege for the successful
execution of the test.

This patch is to notify the user about the privilege the script
demands for the successful execution of the test.
Signed-off-by: Jeffrin Jose T (Rajagiri SET) <ahiliation@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Jakub Kicinski says:

====================
Two small fixes for error handling in bpftool prog load, first patch
removes a duplicated message, second one frees resources correctly.
Multiple error messages break JSON:

{
    "error": "can't pin the object (/sys/fs/bpf/a): File exists"
},{
    "error": "failed to pin program"
}
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Remembering to close all descriptors and free memory may not seem
important in a user space tool like bpftool, but if we were to run
in batch mode the consumed resources start to add up quickly.  Make
sure program load closes the libbpf object (which unloads and frees
it).

Fixes: 49a086c2 ("bpftool: implement prog load command")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

do_pin_fd() will already print out an error message if something
goes wrong.  Printing another error is unnecessary and will break
JSON output, since error messages are full objects:

$ bpftool -jp prog load tracex1_kern.o /sys/fs/bpf/a
{
    "error": "can't pin the object (/sys/fs/bpf/a): File exists"
},{
    "error": "failed to pin program"
}

Fixes: 49a086c2 ("bpftool: implement prog load command")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

sha: 702353b5 ("selftest: add test for TCP_INQ") forgot to add
tcp_inq to .gitignore.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When delta passed to gem_ptp_adjtime is negative, the sign is
maintained in the ns_to_timespec64 conversion. Hence timespec_add
should be used directly. timespec_sub will just subtract the negative
value thus increasing the time difference.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 296d4856 ("ipvlan: inherit MTU from master device") adjusted
the mtu from the master device when creating a ipvlan device, but it
would also override the mtu value set in rtnl_create_link. It causes
IFLA_MTU param not to take effect.

So this patch is to not adjust the mtu if IFLA_MTU param is set when
creating a ipvlan device.

Fixes: 296d4856 ("ipvlan: inherit MTU from master device")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently it is incrementing SctpFragUsrMsgs when the user message size
is of the exactly same size as the maximum fragment size, which is wrong.

The fix is to increment it only when user message is bigger than the
maximum fragment size.

Fixes: bfd2e4b8 ("sctp: refactor sctp_datamsg_from_user")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 9facc336 ("bpf: reject any prog that failed read-only lock")
offsetof(struct bpf_binary_header, image) became 3 instead of 4,
breaking powerpc BPF badly, since instructions need to be word aligned.

Fixes: 9facc336 ("bpf: reject any prog that failed read-only lock")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When injecting frames in the Ocelot switch driver an injection header
(IFH) should be used to configure various parameters related to a given
frame, such as the port onto which the frame should be departed or its
vlan id. Other parameters in the switch configuration can led to an
injected frame being sent without an IFH but this led to various issues
as the per-frame parameters are then not used. This is especially true
when using multiple ports for injection.

The IFH was injected with the wrong endianness which led to the switch
not taking it into account as the IFH_INJ_BYPASS bit was then unset.
(The bit tells the switch to use the IFH over its internal
configuration). This patch fixes it.

In addition to the endianness fix, the IFH is also fixed. As it was
(unwillingly) unused, some of its fields were not configured the right
way.

Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Device tree based systems without of_dev_auxdata will have the mdio
device named differently than "davinci_mdio(.0)". In this case use the
device's parent's compatible string for matching
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pass the correct thing to rtl8169_interrupt() from netpoll.

Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>
Cc: netdev@vger.kernel.org
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Fixes: ebcd5daa ("r8169: change interrupt handler argument type")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In function strp_data_ready(), it is useless to call queue_work if
the state of strparser is already paused. The state checking should
be done before calling queue_work. The change reduces the context
switches and improves the ktls-rx throughput by approx 20% (measured
on cortex-a53 based platform).
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add fragments to pass bridge and vlan tests.

Fixes: 33b01b7b ("selftests: add rtnetlink test script")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use $(OBJDUMP) instead of literal 'objdump' to avoid
using host toolchain when cross compiling.

Fixes: 421780fd ("bpfilter: fix build error")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull rdma fixes from Jason Gunthorpe:
 "Here are eight fairly small fixes collected over the last two weeks.

  Regression and crashing bug fixes:

   - mlx4/5: Fixes for issues found from various checkers

   - A resource tracking and uverbs regression in the core code

   - qedr: NULL pointer regression found during testing

   - rxe: Various small bugs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/rxe: Fix missing completion for mem_reg work requests
  RDMA/core: Save kernel caller name when creating CQ using ib_create_cq()
  IB/uverbs: Fix ordering of ucontext check in ib_uverbs_write
  IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'
  RDMA/qedr: Fix NULL pointer dereference when running over iWARP without RDMA-CM
  IB/mlx5: Fix return value check in flow_counters_set_data()
  IB/mlx5: Fix memory leak in mlx5_ib_create_flow
  IB/rxe: avoid double kfree skb

Pull networking fixes from David Miller:

 1) Fix crash on bpf_prog_load() errors, from Daniel Borkmann.

 2) Fix ATM VCC memory accounting, from David Woodhouse.

 3) fib6_info objects need RCU freeing, from Eric Dumazet.

 4) Fix SO_BINDTODEVICE handling for TCP sockets, from David Ahern.

 5) Fix clobbered error code in enic_open() failure path, from
    Govindarajulu Varadarajan.

 6) Propagate dev_get_valid_name() error returns properly, from Li
    RongQing.

 7) Fix suspend/resume in davinci_emac driver, from Bartosz Golaszewski.

 8) Various act_ife fixes (recursive locking, IDR leaks, etc.) from
    Davide Caratti.

 9) Fix buggy checksum handling in sungem driver, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (40 commits)
  ip: limit use of gso_size to udp
  stmmac: fix DMA channel hang in half-duplex mode
  net: stmmac: socfpga: add additional ocp reset line for Stratix10
  net: sungem: fix rx checksum support
  bpfilter: ignore binary files
  bpfilter: fix build error
  net/usb/drivers: Remove useless hrtimer_active check
  net/sched: act_ife: preserve the action control in case of error
  net/sched: act_ife: fix recursive lock and idr leak
  net: ethernet: fix suspend/resume in davinci_emac
  net: propagate dev_get_valid_name return code
  enic: do not overwrite error code
  net/tcp: Fix socket lookups with SO_BINDTODEVICE
  ptp: replace getnstimeofday64() with ktime_get_real_ts64()
  net/ipv6: respect rcu grace period before freeing fib6_info
  net: net_failover: fix typo in net_failover_slave_register()
  ipvlan: use ETH_MAX_MTU as max mtu
  net: hamradio: use eth_broadcast_addr
  enic: initialize enic->rfs_h.lock in enic_probe
  MAINTAINERS: Add Sam as the maintainer for NCSI
  ...

Pull HID fixes from Jiri Kosina:

 - Wacom 2nd-gen Intuos Pro large Y axis handling fix from Jason Gerecke

 - fix for hibernation in Intel ISH driver, from Even Xu

 - crash fix for hid-steam driver, from Rodrigo Rivas Costa

 - new device ID addition to google-hammer driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: wacom: Correct logical maximum Y for 2nd-gen Intuos Pro large
  HID: intel_ish-hid: ipc: register more pm callbacks to support hibernation
  HID: steam: use hid_device.driver_data instead of hid_set_drvdata()
  HID: google: Add support for whiskers

Pull dma-mapping rename from Christoph Hellwig:
 "Move all the dma-mapping code to kernel/dma and lose their dma-*
  prefixes"

* tag 'dma-rename-4.18' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: move all DMA mapping code to kernel/dma
  dma-mapping: use obj-y instead of lib-y for generic dma ops

The HID descriptor for the 2nd-gen Intuos Pro large (PTH-860) contains
a typo which defines an incorrect logical maximum Y value. This causes
a small portion of the bottom of the tablet to become unusable (both
because the area is below the "bottom" of the tablet and because
'wacom_wac_event' ignores out-of-range values). It also results in a
skewed aspect ratio.

To fix this, we add a quirk to 'wacom_usage_mapping' which overwrites
the data with the correct value.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
CC: stable@vger.kernel.org # v4.10+
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Current ISH driver only registers suspend/resume PM callbacks which don't
support hibernation (suspend to disk). Basically after hiberation, the ISH
can't resume properly and user may not see sensor events (for example: screen
		rotation may not work).

User will not see a crash or panic or anything except the following message
in log:

	hid-sensor-hub 001F:8086:22D8.0001: timeout waiting for response from ISHTP device

So this patch adds support for S4/hiberbation to ISH by using the
SIMPLE_DEV_PM_OPS() MACRO instead of struct dev_pm_ops directly. The suspend
and resume functions will now be used for both suspend to RAM and hibernation.

If power management is disabled, SIMPLE_DEV_PM_OPS will do nothing, the suspend
and resume related functions won't be used, so mark them as __maybe_unused to
clarify that this is the intended behavior, and remove #ifdefs for power
management.

Cc: stable@vger.kernel.org
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

When creating the low-level hidraw device, the reference to steam_device
was stored using hid_set_drvdata(). But this value is not guaranteed to
be kept when set before calling probe. If this pointer is reset, it
crashes when opening the emulated hidraw device.

It looks like hid_set_drvdata() is for users "avobe" this hid_device,
while hid_device.driver_data it for users "below" this one.

In this case, we are creating a virtual hidraw device, so we must use
hid_device.driver_data.
Signed-off-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Tested-by: Mariusz Ceier <mceier+kernel@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The rewrite of the cmdline fetching missed the fact that we used to also
return the final terminating NUL character of the last argument.  I
hadn't noticed, and none of the tools I tested cared, but something
obviously must care, because Michal Kubecek noticed the change in
behavior.

Tweak the "find the end" logic to actually include the NUL character,
and once past the eend of argv, always start the strnlen() at the
expected (original) argument end.

This whole "allow people to rewrite their arguments in place" is a nasty
hack and requires that odd slop handling at the end of the argv array,
but it's our traditional model, so we continue to support it.
Repored-and-bisected-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-and-tested-by: Michal Kubecek <mkubecek@suse.cz>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The ipcm(6)_cookie field gso_size is set only in the udp path. The ip
layer copies this to cork only if sk_type is SOCK_DGRAM. This check
proved too permissive. Ping and l2tp sockets have the same type.

Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to
exclude ping sockets.

v1 -> v2
- remove irrelevant whitespace changes

Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

HW does not support Half-duplex mode in multi-queue
scenario. Fix it by not advertising the Half-Duplex
mode if multi-queue enabled.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Stratix10 platform has an additional reset line, OCP(Open Core Protocol),
that also needs to get deasserted for the stmmac ethernet controller to work.
Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build
dwmac-socfpga.

Also, remove the redundant check for the reset controller pointer. The
reset driver already checks for the pointer and returns 0 if the pointer
is NULL.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE
are friends"), sungem owners reported the infamous "eth0: hw csum failure"
message.

CHECKSUM_COMPLETE has in fact never worked for this driver, but this
was masked by the fact that upper stacks had to strip the FCS, and
therefore skb->ip_summed was set back to CHECKSUM_NONE before
my recent change.

Driver configures a number of bytes to skip when the chip computes
the checksum, and for some reason only half of the Ethernet header
was skipped.

Then a second problem is that we should strip the FCS by default,
unless the driver is updated to eventually support NETIF_F_RXFCS in
the future.

Finally, a driver should check if NETIF_F_RXCSUM feature is enabled
or not, so that the admin can turn off rx checksum if wanted.

Many thanks to Andreas Schwab and Mathieu Malaterre for their
help in debugging this issue.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Meelis Roos <mroos@linux.ee>
Reported-by: Mathieu Malaterre <malat@debian.org>
Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Tested-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is
enabled, add it to .gitignore to avoid committing it.

Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>