Remove spaces between the function names and open paranthesis and use the kernel coding style.
Signed-off-by: Tom Wales <twales518@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove ComputeTxTime since it is not used.
Signed-off-by: Fernando Apesteguia <fernando.apesteguia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch to the rtl8188e_xmit.c file that fixes up a missing
blank line warning found by the checkpatch.pl tool.
Signed-off-by: Adrian Remonda <adrianremonda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RT_TRACE uses require unnecessary parentheses.

Fix the #define and remove the uses.

Neaten the RT_TRACE lines and multi-line argument wrapping.

dynamic debug can add KBUILD_MODNAME and __func__ so remove those
from the #define.

Use a single statement pr_debug instead of pr_debug and pr_cont
which doesn't support dynamic debug anyway.

Miscellaneous grammar and spelling fixes on the RT_TRACE uses.

Compile tested only.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Also remove related unreachable code.
Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Also remove the unreachable code.
Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Also remove the code previously under #ifndef USE_ONE_PIPE.
Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Also remove the code now unreachable.
Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable support for the National Instruments USB-6501 module.

The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
provides 24 digital I/O lines channels and one 32-bit counter.

This is a preliminary version:
	GPIO: works
	counter: doesn't work
Signed-off-by: Luca Ellero <luca.ellero@brickedbrain.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes warnings of checkpatch.pl script:

CHECK:UNNECESSARY_PARENTHESES: Unnecessary parentheses around devpriv->timer
+        init_timer(&(devpriv->timer));

CHECK:PARENTHESIS_ALIGNMENT: Alignment should match open parenthesis
+        dev_info(dev->class_dev,
+                "%s: %i microvolt, %li microsecond waveform attached\n",

Task of Eudyptula challenge.
Signed-off-by: Niklas Svensson <nks@flawful.org>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The local variable 'irq' is not necessary in dio200_attach(). Just
pass the it->options[1] value directly.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is not used by the drivers. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The 'mainsize' member in the boardinfo for the DIO200 PCI boards is only used
for a sanity check of the pci_resource_len(). This sanity check is not needed.

Remove the sanity check along with the 'mainsize' values in the boardinfo.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All the ISA DIO200 boards have an i/o region size of 0x20 (DIO200_IO_SIZE).
Remove the boardinfo and open code the size in the comedi_request_region()
call.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is not used by the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The private data in this driver only has one member, 'intr_sd', which is
the index to the interrupt subdevice.

This member is initialized during the attach of the driver when the sd_intr
subdevice is detected in the boadinfo 'layout'. The member is then used in
the interrupt handler to get the pointer to the subdevice.

This member is not necessary. The comedi_device 'read_subdev' is also
initialized during the attach. This can be used in the interrupt handler
to get the subdevice pointer.

Refactor the code to not require the private data and remove the struct
and its allocations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core module calls `comedi_set_hw_dev()` to associate the
hardware `struct device` with the `struct comedi_device` before it calls
the comedi driver's "auto_attach" hook `pci224_auto_attach()`.  There is
no need for `pci224_auto_attach()` to call `comedi_set_hw_dev()` itself,
so remove the call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

`pci224_attach_common()` is now only called from `pci225_auto_attach()`,
so absorb it into that function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The macros `PCI_DEVICE_ID_AMPLICON_PCI224` and
`PCI_DEVICE_ID_AMPLICON_PCI234` are only used in the PCI module device
table `amplc_pci224_pci_table[]`.  Just expand the macros where they are
used and remove them.  The macro `PCI_DEVICE_ID_INVALID` is no longer
used either, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `driver_data` member value from the matched entry of the PCI module
device table `amplc_pci224_pci_table[]` is passed through to our comedi
"auto_attach" handler, `pci224_auto_attach()`.  Use that to index
directly into our static board data array `pci224_boards[]` instead of
calling `pci224_find_pci_board()` to search for the entry matching the
PCI device ID.  That function can be removed.  The `devid` and `model`
members of `struct pci224_board` are no longer needed either and can be
removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver no longer supports a "legacy" attach mechanism that searches
for a suitable PCI device and increments it's reference count, but since
the common "detach" handler `pci224_detach()` still has a left-over
`pci_dev_put()`, a matching `pci_dev_get()` is needed in the
"auto_attach" handler `pci224_auto_attach()`.  There is no longer any
reason to "get" and "put" the PCI device, so those calls can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since the driver no longer supports options in its "legacy" attach
mechanism to describe the jumper settings (or any options beyond
restricting a PCI search to a particular bus and/or slot), there is no
need to retain this mechanism in the driver.  Remove the comedi driver
"attach" handler `pci224_attach()`, and the now unused
`pci224_find_pci_dev()`.  Also, remove the "wildcard" entry from the
board table `pci224_boards[]` as it is no longer needed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When attaching a PCI224 or PCI234 manually via the `COMEDI_DEVCONFIG`
ioctl, there are several options the user can supply that describe the
state of the hardware jumpers (LK1 for PCI224, LK1 thru LK5 for PCI234).
These options control how the driver sets up the AO range tables for the
device.  Those options are useless when the board is attached
automatically via the PCI driver probe function
`amplc_pci225_pci_probe()`, `comedi_pci_auto_config()`, and the
comedi driver "auto_attach" handler `pci224_auto_attach()`.

Rip out the range table selection options and use a single, static range
table per board type, containing all the software- and
hardware-selectable ranges for that board.  The PCI234 used to have a
per-channel `range_table_list` rather than an all-channel `range_table`,
as the jumpers selected different ranges for all channels.  Now that the
channels are using a unified range table, use an all-channel
`range_table` instead.

When checking the channel list for an asynchronous command in
`pci224_ao_check_chanlist()` make sure the ranges specified in the list
have compatible jumper settings.  We don't know how the jumpers are
actually set, but we can at least avoid conflicting settings.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the "address-of" operator when the operand is a function.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove some pairs of parentheses that don't really improve readability.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Since anything non-zero is logically "true", don't bother doing
"not-equal" comparisons with zero, except when testing for an explicit
number 0 (not as a result of bit tests for example).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a bit of whitespace to the initializer of `pci224_boards[]` for
aesthetic reasons.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch issue: "CHECK: spinlock_t definition without comment".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch issue: "CHECK: multiple assignments should be avoided".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix checkpatch issues: "CHECK: Blank lines aren't necessary before a
close brace '}'".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Reformat comments to fit in with the preferred coding style, including
the copyright and comedi driver description comments at the start of the
file.  Also, remove a boiler-plate comment for the comedi device private
data structure.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed coding style issue "Missing a blank line after declarations"
detected by the 'checkpatch.pl' script.
Signed-off-by: Tobenna P. Igwe <ptigwe@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There was a missing line between declarations and code in vbusdeviceinfo.h.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Clean up the format of the vmcall functions in iovmcall_gnuc.h. These functions
are rewritten for clarity and to correct the indention, without changing any
functionality.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are spacing errors in the functions in iovmcall_gnuc. Fix these.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>