- 25 May, 2017 12 commits
-
-
LABBE Corentin authored
The current stmmac_adjust_link() part which handle speed have some if (has_platform) code and my dwmac-sun8i will add more of them. So we need to handle better speed selection. Moreover the struct link member speed and port are hard to guess their purpose. And their unique usage are to be combined for writing speed. So this patch replace speed/port by simpler speed10/speed100/speed1000/speed_mask variables. In dwmac4_core_init and dwmac1000_core_init, port/speed value was used directly without using the struct link. This patch convert also their usage to speedxxx. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
LABBE Corentin authored
This patch convert old_link from int to bool since it store only 1 or 0 Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
LABBE Corentin authored
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
LABBE Corentin authored
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
LABBE Corentin authored
This patch convert new_state from int to bool since it store only 1 or 0 Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Matthias Kaehlcke authored
The functions jme_restart_tx_engine(), jme_pause_rx() and jme_resume_rx() are not used. Removing them fixes the following warnings when building with clang: drivers/net/ethernet/jme.c:694:1: error: unused function 'jme_restart_tx_engine' [-Werror,-Wunused-function] drivers/net/ethernet/jme.c:2393:20: error: unused function 'jme_pause_rx' [-Werror,-Wunused-function] drivers/net/ethernet/jme.c:2406:20: error: unused function 'jme_resume_rx' [-Werror,-Wunused-function] Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2017-05-23 Here's the first Bluetooth & 802.15.4 pull request targeting the 4.13 kernel release. - Bluetooth 5.0 improvements (Data Length Extensions and alternate PHY) - Support for new Intel Bluetooth adapter [[8087:0aaa] - Various fixes to ieee802154 code - Various fixes to HCI UART code ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Uwe Kleine-König authored
Commit af6b6967 ("net: phy: export genphy_config_init()") introduced this EXPORT_SYMBOL and put it after gen10g_soft_reset() instead of directly after genphy_config_init. Probably this happend when the patch was applied because http://patchwork.ozlabs.org/patch/339622/ looks ok. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Paul Fiterau Brostean reported : <quote> Linux TCP stack we analyze exhibits behavior that seems odd to me. The scenario is as follows (all packets have empty payloads, no window scaling, rcv/snd window size should not be a factor): TEST HARNESS (CLIENT) LINUX SERVER 1. - LISTEN (server listen, then accepts) 2. - --> <SEQ=100><CTL=SYN> --> SYN-RECEIVED 3. - <-- <SEQ=300><ACK=101><CTL=SYN,ACK> <-- SYN-RECEIVED 4. - --> <SEQ=101><ACK=301><CTL=ACK> --> ESTABLISHED 5. - <-- <SEQ=301><ACK=101><CTL=FIN,ACK> <-- FIN WAIT-1 (server opts to close the data connection calling "close" on the connection socket) 6. - --> <SEQ=101><ACK=99999><CTL=FIN,ACK> --> CLOSING (client sends FIN,ACK with not yet sent acknowledgement number) 7. - <-- <SEQ=302><ACK=102><CTL=ACK> <-- CLOSING (ACK is 102 instead of 101, why?) ... (silence from CLIENT) 8. - <-- <SEQ=301><ACK=102><CTL=FIN,ACK> <-- CLOSING (retransmission, again ACK is 102) Now, note that packet 6 while having the expected sequence number, acknowledges something that wasn't sent by the server. So I would expect the packet to maybe prompt an ACK response from the server, and then be ignored. Yet it is not ignored and actually leads to an increase of the acknowledgement number in the server's retransmission of the FIN,ACK packet. The explanation I found is that the FIN in packet 6 was processed, despite the acknowledgement number being unacceptable. Further experiments indeed show that the server processes this FIN, transitioning to CLOSING, then on receiving an ACK for the FIN it had send in packet 5, the server (or better said connection) transitions from CLOSING to TIME_WAIT (as signaled by netstat). </quote> Indeed, tcp_rcv_state_process() calls tcp_ack() but does not exploit the @acceptable status but for TCP_SYN_RECV state. What we want here is to send a challenge ACK, if not in TCP_SYN_RECV state. TCP_FIN_WAIT1 state is not the only state we should fix. Add a FLAG_NO_CHALLENGE_ACK so that tcp_rcv_state_process() can choose to send a challenge ACK and discard the packet instead of wrongly change socket state. With help from Neal Cardwell. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Paul Fiterau Brostean <p.fiterau-brostean@science.ru.nl> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
WANG Cong authored
tcf_chain_get() always creates a new filter chain if not found in existing ones. This is totally unnecessary when we get or delete filters, new chain should be only created for new filters (or new actions). Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
With the introduction of chain goto action, the reclassification would cause the re-iteration of the actual chain. It makes more sense to restart the whole thing and re-iterate starting from the original tp - start of chain 0. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5-update-2017-05-23 First patch from Leon, came to remove the redundant usage of mlx5_vzalloc, and directly use kvzalloc across all mlx5 drivers. 2nd patch from Noa, adds new device IDs into the supported devices list. 3rd and 4th patches from Ilan are adding the basic infrastructure and support for Mellanox's mlx5 FPGA. Last two patches from Tariq came to modify the outdated driver version reported in ethtool and in mlx5_ib to more reflect the current driver state and remove the redundant date string reported in the version. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 May, 2017 20 commits
-
-
Eric Dumazet authored
After the mentioned commit, some of our packetdrill tests became flaky. TCP_SYNCNT socket option can limit the number of SYN retransmits. retransmits_timed_out() has to compare times computations based on local_clock() while timers are based on jiffies. With NTP adjustments and roundings we can observe 999 ms delay for 1000 ms timers. We end up sending one extra SYN packet. Gimmick added in commit 6fa12c85 ("Revert Backoff [v3]: Calculate TCP's connection close threshold as a time value") makes no real sense for TCP_SYN_SENT sockets where no RTO backoff can happen at all. Lets use a simpler logic for TCP_SYN_SENT sockets and remove @syn_set parameter from retransmits_timed_out() Fixes: 9a568de4 ("tcp: switch TCP TS option (RFC 7323) to 1ms clock") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Now that the switchdev bridge ageing time attribute is propagated to all switch chips of the fabric, each switch can check if the requested value is valid and program itself, so that the whole fabric shares a common ageing time setting. This is especially needed for switch chips in between others, containing no bridge port members but evidently used in the data path. To achieve that, remove the condition which skips the other switches. We also don't need to identify the target switch anymore, thus remove the sw_index member of the dsa_notifier_ageing_time_info notifier structure. On ZII Dev Rev B (with two 88E6352 and one 88E6185) and ZII Dev Rev C (with two 88E6390X), we have the following hardware configuration: # ip link add name br0 type bridge # ip link set master br0 dev lan6 br0: port 1(lan6) entered blocking state br0: port 1(lan6) entered disabled state # echo 2000 > /sys/class/net/br0/bridge/ageing_time Before this patch: zii-rev-b# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 300000 300000 15000 zii-rev-c# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 300000 18750 After this patch: zii-rev-b# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 15000 15000 15000 zii-rev-c# cat /sys/kernel/debug/mv88e6xxx/sw*/age_time 18750 18750 Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== net: add tcp flags match support to flower and offload it This patch adds support to dissect tcp flags, match on them using flower classifier and offload such rules to mlxsw Spectrum devices. v1->v2: - removed no longer relevant comment from patch 1 as suggested by Or - sent correct patches this time ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Allow to offload rules that contain tcp flags within the mask. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Add acl block called "ipv4" which contains tcp flags. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Define new element for tcp flags and place it into scratch area. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Benefit from the support of tcp flags dissection and allow user to insert rules matching on tcp flags. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Add support for dissection of tcp flags. Uses similar function call to tcp dissection function as arp, mpls and others. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yuval Mintz says: ==================== qed/qede: Mostly-cleanup series This series contains some cleanup of the qed and qede code: - #1 contains mostly static/endian changes in order to allow qede to pass sparse compilation cleanly. - #2, #5 and #6 are either semantic or remove dead-code from driver. - #9, #10 and #11 relate to printing and slightly change some APIs between qed and the protocol drivers for that end [sharing the interface names and information regarding device]. The rest of the patches are minor changes/fixes to various flows in qed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mintz, Yuval authored
Current API between qed and protocol modules allows passing an additional private string - but it doesn't get utilized by qed anywhere. Clarify the API by removing it and renaming it 'set_name'. CC: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mintz, Yuval authored
Replace meaningless logged print ('Ending successfully qede probe') with a single-liner containing interesting information about probed device. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tomer Tayar authored
Pass additional information about package installed on persistent memory so that protocol drivers would be able to log it. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michal Kalderon authored
Since we're closing the parser searching for RDMA when stoping the fastpath, we need to re-enable it when starting the fastpath once again. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tomer Tayar authored
Today, driver has a synchronization point while closing the device which synchronizes its slowpath interrupt line. However, that's insufficient as that ISR would schedule the slowpath-tasklet - so even after ISR is over it's possible the handling of the interrupt has not completed. By doing a disable/enable on the taskelt we guarantee that all HW events that should no longer be genereated from that point onward in the flow are truly behind us. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mintz, Yuval authored
A0 never went public, so no need to protect against it. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tomer Tayar authored
The parameter reflects the number of physical ports connected to a single engine, not all. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tomer Tayar authored
In case nvram layout of board is incorrect, board may exhibit peculiar oddities. Log such a rare event. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
Flows configuring tunnel ports in HW use the main_ptt which should be reserved for core-functionality. Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mintz, Yuval authored
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
Solves the following warning in qede - - Several cases of missing cpu_to_le16() conversions - Adds 'static' to one function declaration - Removes dcbnl operation that's currently getting populated twice Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 May, 2017 8 commits
-
-
Gustavo A. R. Silva authored
Null check at line 918: if (!spi) {, implies spi might be NULL. Function spi_get_drvdata() dereference pointer spi. Move pointer priv assignment after the null check. Addresses-Coverity-ID: 1408888 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Lin Zhang authored
This patch fixes the kernel oops when release net_device reference in advance. In function raw_sendmsg(i think the dgram_sendmsg has the same problem), there is a race condition between dev_put and dev_queue_xmit when the device is gong that maybe lead to dev_queue_ximt to see an illegal net_device pointer. My test kernel is 3.13.0-32 and because i am not have a real 802154 device, so i change lowpan_newlink function to this: /* find and hold real wpan device */ real_dev = dev_get_by_index(src_net, nla_get_u32(tb[IFLA_LINK])); if (!real_dev) return -ENODEV; // if (real_dev->type != ARPHRD_IEEE802154) { // dev_put(real_dev); // return -EINVAL; // } lowpan_dev_info(dev)->real_dev = real_dev; lowpan_dev_info(dev)->fragment_tag = 0; mutex_init(&lowpan_dev_info(dev)->dev_list_mtx); Also, in order to simulate preempt, i change the raw_sendmsg function to this: skb->dev = dev; skb->sk = sk; skb->protocol = htons(ETH_P_IEEE802154); dev_put(dev); //simulate preempt schedule_timeout_uninterruptible(30 * HZ); err = dev_queue_xmit(skb); if (err > 0) err = net_xmit_errno(err); and this is my userspace test code named test_send_data: int main(int argc, char **argv) { char buf[127]; int sockfd; sockfd = socket(AF_IEEE802154, SOCK_RAW, 0); if (sockfd < 0) { printf("create sockfd error: %s\n", strerror(errno)); return -1; } send(sockfd, buf, sizeof(buf), 0); return 0; } This is my test case: root@zhanglin-x-computer:~/develop/802154# uname -a Linux zhanglin-x-computer 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux root@zhanglin-x-computer:~/develop/802154# ip link add link eth0 name lowpan0 type lowpan root@zhanglin-x-computer:~/develop/802154# //keep the lowpan0 device down root@zhanglin-x-computer:~/develop/802154# ./test_send_data & //wait a while root@zhanglin-x-computer:~/develop/802154# ip link del link dev lowpan0 //the device is gone //oops [381.303307] general protection fault: 0000 [#1]SMP [381.303407] Modules linked in: af_802154 6lowpan bnep rfcomm bluetooth nls_iso8859_1 snd_hda_codec_hdmi snd_hda_codec_realtek rts5139(C) snd_hda_intel snd_had_codec snd_hwdep snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_req intel_rapl snd_seq_device coretemp i915 kvm_intel kvm snd_timer snd crct10dif_pclmul crc32_pclmul ghash_clmulni_intel cypted drm_kms_helper drm i2c_algo_bit soundcore video mac_hid parport_pc ppdev ip parport hid_generic usbhid hid ahci r8169 mii libahdi [381.304286] CPU:1 PID: 2524 Commm: 1 Tainted: G C 0 3.13.0-32-generic [381.304409] Hardware name: Haier Haier DT Computer/Haier DT Codputer, BIOS FIBT19H02_X64 06/09/2014 [381.304546] tasks: ffff000096965fc0 ti: ffffB0013779c000 task.ti: ffffB8013779c000 [381.304659] RIP: 0010:[<ffffffff01621fe1>] [<ffffffff81621fe1>] __dev_queue_ximt+0x61/0x500 [381.304798] RSP: 0018:ffffB8013779dca0 EFLAGS: 00010202 [381.304880] RAX: 272b031d57565351 RBX: 0000000000000000 RCX: ffff8800968f1a00 [381.304987] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800968f1a00 [381.305095] RBP: ffff8e013773dce0 R08: 0000000000000266 R09: 0000000000000004 [381.305202] R10: 0000000000000004 R11: 0000000000000005 R12: ffff88013902e000 [381.305310] R13: 000000000000007f R14: 000000000000007f R15: ffff8800968f1a00 [381.305418] FS: 00007fc57f50f740(0000) GS: ffff88013fc80000(0000) knlGS: 0000000000000000 [381.305540] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [381.305627] CR2: 00007fad0841c000 CR3: 00000001368dd000 CR4: 00000000001007e0 [361.905734] Stack: [381.305768] 00000000002052d0 000000003facb30a ffff88013779dcc0 ffff880137764000 [381.305898] ffff88013779de70 000000000000007f 000000000000007f ffff88013902e000 [381.306026] ffff88013779dcf0 ffffffff81622490 ffff88013779dd39 ffffffffa03af9f1 [381.306155] Call Trace: [381.306202] [<ffffffff81622490>] dev_queue_xmit+0x10/0x20 [381.306294] [<ffffffffa03af9f1>] raw_sendmsg+0x1b1/0x270 [af_802154] [381.306396] [<ffffffffa03af054>] ieee802154_sock_sendmsg+0x14/0x20 [af_802154] [381.306512] [<ffffffff816079eb>] sock_sendmsg+0x8b/0xc0 [381.306600] [<ffffffff811d52a5>] ? __d_alloc+0x25/0x180 [381.306687] [<ffffffff811a1f56>] ? kmem_cache_alloc_trace+0x1c6/0x1f0 [381.306791] [<ffffffff81607b91>] SYSC_sendto+0x121/0x1c0 [381.306878] [<ffffffff8109ddf4>] ? vtime_account_user+x54/0x60 [381.306975] [<ffffffff81020d45>] ? syscall_trace_enter+0x145/0x250 [381.307073] [<ffffffff816086ae>] SyS_sendto+0xe/0x10 [381.307156] [<ffffffff8172c87f>] tracesys+0xe1/0xe6 [381.307233] Code: c6 a1 a4 ff 41 8b 57 78 49 8b 47 20 85 d2 48 8b 80 78 07 00 00 75 21 49 8b 57 18 48 85 d2 74 18 48 85 c0 74 13 8b 92 ac 01 00 00 <3b> 50 10 73 08 8b 44 90 14 41 89 47 78 41 f6 84 24 d5 00 00 00 [381.307801] RIP [<ffffffff81621fe1>] _dev_queue_xmit+0x61/0x500 [381.307901] RSP <ffff88013779dca0> [381.347512] Kernel panic - not syncing: Fatal exception in interrupt [381.347747] drm_kms_helper: panic occurred, switching back to text console In my opinion, there is always exist a chance that the device is gong before call dev_queue_xmit. I think the latest kernel is have the same problem and that dev_put should be behind of the dev_queue_xmit. Signed-off-by: Lin Zhang <xiaolou4617@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Lin Zhang authored
Explicit set skb->sk is needless, sock_alloc_send_skb is already set it. Signed-off-by: Lin Zhang <xiaolou4617@gmail.com> Acked-by: Stefan Schmidt <stefan@osg.samsung.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Jürg Billeter authored
The iBT 3.5 controllers (Intel 8265, Windstorm Peak) need intel/ibt-12-16.sfi and intel/ibt-12-16.ddc firmware files from linux-firmware repository. Signed-off-by: Jürg Billeter <j@bitron.ch> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
-
Alexey Dobriyan authored
This field is sizeof of corresponding kmem_cache so it can't be negative. Space will be saved after 32-bit kmem_cache_create() patch. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexey Dobriyan authored
This field is sizeof of corresponding kmem_cache so it can't be negative. Prepare for 32-bit kmem_cache_create(). Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Govindarajulu Varadarajan authored
In case of busy poll, napi_complete_done returns false and does not dequeue napi. In this case do not unmask the intr. We are guaranteed napi is called again. This reduces unnecessary iowrites. Signed-off-by: Govindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
When user instructs to remove all filters from chain, we cannot destroy the chain as other actions may hold a reference. Also the put in errout would try to destroy it again. So instead, just walk the chain and remove all existing filters. Fixes: 5bc17018 ("net: sched: introduce multichain support for filters") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-