- 07 Nov, 2019 2 commits
-
-
Ian Rogers authored
Yyabort doesn't destruct inputs and so this must be done manually before using yyabort. Signed-off-by:
Ian Rogers <irogers@google.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: clang-built-linux@googlegroups.com Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20191030223448.12930-8-irogers@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Ian Rogers authored
If parsing fails then destructors are ran to clean the up the stack. Rename the head union member to make the term and evlist use cases more distinct, this simplifies matching the correct destructor. Committer notes: Jiri: "Nice did not know about this.. looks like it's been in bison for some time, right?" Ian: "Looks like it wasn't in Bison 1 but in Bison 2, we're at Bison 3 and Bison 2 is > 14 years old: https://web.archive.org/web/20050924004158/http://www.gnu.org/software/bison/manual/html_mono/bison.html#Destructor-Decl" Signed-off-by:
-
- 06 Nov, 2019 38 commits
-
-
Ian Rogers authored
Make it easier to release memory associated with parse event terms by duplicating the string for the config name and ensuring the val string is a duplicate. Currently the parser may memory leak terms and this is addressed in a later patch. Signed-off-by:
-
Ian Rogers authored
Parse event error handling may overwrite one error string with another creating memory leaks. Introduce a helper routine that warns about multiple error messages as well as avoiding the memory leak. A reproduction of this problem can be seen with: perf stat -e c/c/ After this change this produces: WARNING: multiple event parsing errors event syntax error: 'c/c/' \___ unknown term valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events Signed-off-by: -
Adrian Hunter authored
create_gcov (refer to the autofdo example in tools/perf/Documentation/intel-pt.txt) now needs the evsels to read the perf.data file. So don't strip them. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
-
John Garry authored
Currently when cross compiling perf tool for ARM64 on my x86 machine I get this error: arch/arm64/util/sym-handling.c:9:10: fatal error: gelf.h: No such file or directory #include <gelf.h> For the build, libelf is reported off: Auto-detecting system features: ... ... libelf: [ OFF ] Indeed, test-libelf is not built successfully: more ./build/feature/test-libelf.make.output test-libelf.c:2:10: fatal error: libelf.h: No such file or directory #include <libelf.h> ^~~~~~~~~~ compilation terminated. I have no such problems natively compiling on ARM64, and I did not previously have this issue for cross compiling. Fix by relocating the gelf.h include. Signed-off-by:John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/1573045254-39833-1-git-send-email-john.garry@huawei.comSigned-off-by:
-
Jiri Olsa authored
Adding new --per-node option to aggregate counts per NUMA nodes for system-wide mode measurements. You can specify --per-node in live mode: # perf stat -a -I 1000 -e cycles --per-node # time node cpus counts unit events 1.000542550 N0 20 6,202,097 cycles 1.000542550 N1 20 639,559 cycles 2.002040063 N0 20 7,412,495 cycles 2.002040063 N1 20 2,185,577 cycles 3.003451699 N0 20 6,508,917 cycles 3.003451699 N1 20 765,607 cycles ... Or in the record/report stat session: # perf stat record -a -I 1000 -e cycles # time counts unit events 1.000536937 10,008,468 cycles 2.002090152 9,578,539 cycles 3.003625233 7,647,869 cycles 4.005135036 7,032,086 cycles ^C 4.340902364 3,923,893 cycles # perf stat report --per-node # time node cpus counts unit events 1.000536937 N0 20 9,355,086 cycles 1.000536937 N1 20 653,382 cycles 2.002090152 N0 20 7,712,838 cycles 2.002090152 N1 20 1,865,701 cycles 3.003625233 N0 20 6,604,441 cycles 3.003625233 N1 20 1,043,428 cycles 4.005135036 N0 20 6,350,522 cycles 4.005135036 N1 20 681,564 cycles 4.340902364 N0 20 3,403,188 cycles 4.340902364 N1 20 520,705 cycles Signed-off-by: -
Jiri Olsa authored
To speed up cpu to node lookup, add perf_env__numa_node(), that creates cpu array on the first lookup, that holds numa nodes for each stored cpu. Signed-off-by:
-
Haiyan Song authored
New Metrics: - DSB_Switches: fraction of cycles CPU was stalled due to switches from DSB to MITE pipeline [all] - L2_Evictions_{Silent|NonSilent}_PKI: L2 {silent|non silent} ecivtions rate per Kilo instruction [SKX+] - IpFarBranch - Instructions per Far Branch Other Enhancements & fixes: - KBLR/CFL & CLX move to separate columns (no column sharing via if #model) - Re-organized/renamed Metric Group Signed-off-by:Haiyan Song <haiyanx.song@intel.com> Reviewed-by:
Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Link: http://lore.kernel.org/lkml/20191030082308.10919-1-haiyanx.song@intel.comSigned-off-by:
-
Haiyan Song authored
Update CascadelakeX events to v1.05. Other changes: remove duplicated and without description events. Signed-off-by:
-
Ian Rogers authored
If event parsing fails the event list is leaked, instead splice the list onto the out result and let the caller cleanup. An example input for parse_events found by libFuzzer that reproduces this memory leak is 'm{'. Signed-off-by: -
James Clark authored
When a 'make DEBUG=1' build is done, the command parser is still built with -O6 and is hard to step through, fix it making it use -O0 in that case. Signed-off-by:
James Clark <james.clark@arm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: nd <nd@arm.com> Link: http://lore.kernel.org/lkml/20191028113340.4282-1-james.clark@arm.com [ split from a larger patch ] Signed-off-by:
-
James Clark authored
Move EXTRA_WARNINGS and EXTRA_FLAGS to the end of the compilation line, otherwise they cannot be used to override the default values. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
To reduce boilerplate, providing a more compact form to iterate over the maps in a map_group. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-gc3go6fmdn30twusg91t2q56@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To reduce boilerplate, provide a more compact form using an idiom present in other trees of data structures. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-59gmq4kg1r68ou1wknyjl78x@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Just like free(), return NULL in that case, will simplify the for_each_entry_safe() iterators. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-pbde2ucn49khnrebclys9pny@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
We were checking just if it was still on some rb tree, but that is not the only way that this map can still have references, map->refcnt is there exactly for this, use it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-hany65tbeavsax7n3xvwl9pc@git.kernel.orgSigned-off-by:
-
Adrian Hunter authored
Add functions to write into the dso file data cache, but not change the file itself. Signed-off-by:
-
Adrian Hunter authored
Refactor dso_cache__read() to separate populating the cache from copying data from it. This is preparation for adding a cache "write" that will update the data in the cache. Signed-off-by:
-
Adrian Hunter authored
Add auxtrace_cache__remove(). Intel PT uses an auxtrace_cache to store the results of code-walking, so that the same block of instructions does not have to be decoded repeatedly. However, when there are text poke events, the associated cache entries need to be removed. Signed-off-by:
-
Masami Hiramatsu authored
Fix to show ranges of variables (--range and --vars option) in functions which DIE has only ranges but no entry_pc attribute. Without this fix: # perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> (No matched variables) With this fix: # perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> [VAL] int cpu @<clear_tasks_mm_cpumask+[0-35,317-317,2052-2059]> Committer testing: Before: [root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> (No matched variables) [root@quaco ~]# After: [root@quaco ~]# perf probe --range -V clear_tasks_mm_cpumask Available variables at clear_tasks_mm_cpumask @<clear_tasks_mm_cpumask+0> [VAL] int cpu @<clear_tasks_mm_cpumask+[0-23,23-105,105-106,106-106,1843-1850,1850-1862]> [root@quaco ~]# Using it: [root@quaco ~]# perf probe clear_tasks_mm_cpumask cpu Added new event: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask with cpu) You can now use it in all perf tools, such as: perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1 [root@quaco ~]# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c with cpu) [root@quaco ~]# [root@quaco ~]# perf trace -e probe:*cpumask ^C[root@quaco ~]# Fixes: 349e8d26 ("perf probe: Add --range option to show a variable's location range") Signed-off-by:Masami Hiramatsu <mhiramat@kernel.org> Tested-by:
-
Masami Hiramatsu authored
Fix 'perf probe --line' option to show inlined function callsite lines even if the function DIE has only ranges. Without this: # perf probe -L amd_put_event_constraints ... 2 { 3 if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw)) __amd_put_nb_event_constraints(cpuc, event); 5 } With this patch: # perf probe -L amd_put_event_constraints ... 2 { 3 if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw)) 4 __amd_put_nb_event_constraints(cpuc, event); 5 } Committer testing: Before: [root@quaco ~]# perf probe -L amd_put_event_constraints <amd_put_event_constraints@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/arch/x86/events/amd/core.c:0> 0 static void amd_put_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event) 2 { 3 if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw)) __amd_put_nb_event_constraints(cpuc, event); 5 } PMU_FORMAT_ATTR(event, "config:0-7,32-35"); PMU_FORMAT_ATTR(umask, "config:8-15" ); [root@quaco ~]# After: [root@quaco ~]# perf probe -L amd_put_event_constraints <amd_put_event_constraints@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/arch/x86/events/amd/core.c:0> 0 static void amd_put_event_constraints(struct cpu_hw_events *cpuc, struct perf_event *event) 2 { 3 if (amd_has_nb(cpuc) && amd_is_nb_event(&event->hw)) 4 __amd_put_nb_event_constraints(cpuc, event); 5 } PMU_FORMAT_ATTR(event, "config:0-7,32-35"); PMU_FORMAT_ATTR(umask, "config:8-15" ); [root@quaco ~]# perf probe amd_put_event_constraints:4 Added new event: probe:amd_put_event_constraints (on amd_put_event_constraints:4) You can now use it in all perf tools, such as: perf record -e probe:amd_put_event_constraints -aR sleep 1 [root@quaco ~]# [root@quaco ~]# perf probe -l probe:amd_put_event_constraints (on amd_put_event_constraints:4@arch/x86/events/amd/core.c) probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c) [root@quaco ~]# Using it: [root@quaco ~]# perf trace -e probe:* ^C[root@quaco ~]# Ok, Intel system here... :-) Fixes: 4cc9cec6 ("perf probe: Introduce lines walker interface") Signed-off-by: -
Masami Hiramatsu authored
Since debuginfo__find_probe_point() uses dwarf_entrypc() for finding the entry address of the function on which a probe is, it will fail when the function DIE has only ranges attribute. To fix this issue, use die_entrypc() instead of dwarf_entrypc(). Without this fix, perf probe -l shows incorrect offset: # perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579263632@work/linux/linux/kernel/cpu.c) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask+18446744071579263752@work/linux/linux/kernel/cpu.c) With this: # perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@work/linux/linux/kernel/cpu.c) probe:clear_tasks_mm_cpumask_1 (on clear_tasks_mm_cpumask:21@work/linux/linux/kernel/cpu.c) Committer testing: Before: [root@quaco ~]# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask+18446744071579765152@kernel/cpu.c) [root@quaco ~]# After: [root@quaco ~]# perf probe -l probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask@kernel/cpu.c) [root@quaco ~]# Fixes: 1d46ea2a ("perf probe: Fix listing incorrect line number with inline function") Signed-off-by: -
Masami Hiramatsu authored
Fix perf probe to probe an inlne function which has no entry pc or low pc but only has ranges attribute. This seems very rare case, but I could find a few examples, as same as probe_point_search_cb(), use die_entrypc() to get the entry address in probe_point_inline_cb() too. Without this patch: # perf probe -D __amd_put_nb_event_constraints Failed to get entry address of __amd_put_nb_event_constraints. Probe point '__amd_put_nb_event_constraints' not found. Error: Failed to add events. With this patch: # perf probe -D __amd_put_nb_event_constraints p:probe/__amd_put_nb_event_constraints amd_put_event_constraints+43 Committer testing: Before: [root@quaco ~]# perf probe -D __amd_put_nb_event_constraints Failed to get entry address of __amd_put_nb_event_constraints. Probe point '__amd_put_nb_event_constraints' not found. Error: Failed to add events. [root@quaco ~]# After: [root@quaco ~]# perf probe -D __amd_put_nb_event_constraints p:probe/__amd_put_nb_event_constraints _text+33789 [root@quaco ~]# Fixes: 4ea42b18 ("perf: Add perf probe subcommand, a kprobe-event setup helper") Signed-off-by: -
Masami Hiramatsu authored
Fix 'perf probe' to probe a function which has no entry pc or low pc but only has ranges attribute. probe_point_search_cb() uses dwarf_entrypc() to get the probe address, but that doesn't work for the function DIE which has only ranges attribute. Use die_entrypc() instead. Without this fix: # perf probe -k ../build-x86_64/vmlinux -D clear_tasks_mm_cpumask:0 Probe point 'clear_tasks_mm_cpumask' not found. Error: Failed to add events. With this: # perf probe -k ../build-x86_64/vmlinux -D clear_tasks_mm_cpumask:0 p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0 Committer testing: Before: [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0 Probe point 'clear_tasks_mm_cpumask' not found. Error: Failed to add events. [root@quaco ~]# After: [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0 Added new event: probe:clear_tasks_mm_cpumask (on clear_tasks_mm_cpumask) You can now use it in all perf tools, such as: perf record -e probe:clear_tasks_mm_cpumask -aR sleep 1 [root@quaco ~]# Using it with 'perf trace': [root@quaco ~]# perf trace -e probe:clear_tasks_mm_cpumask Doesn't seem to be used in x86_64: $ find . -name "*.c" | xargs grep clear_tasks_mm_cpumask ./kernel/cpu.c: * clear_tasks_mm_cpumask - Safely clear tasks' mm_cpumask for a CPU ./kernel/cpu.c:void clear_tasks_mm_cpumask(int cpu) ./arch/xtensa/kernel/smp.c: clear_tasks_mm_cpumask(cpu); ./arch/csky/kernel/smp.c: clear_tasks_mm_cpumask(cpu); ./arch/sh/kernel/smp.c: clear_tasks_mm_cpumask(cpu); ./arch/arm/kernel/smp.c: clear_tasks_mm_cpumask(cpu); ./arch/powerpc/mm/nohash/mmu_context.c: clear_tasks_mm_cpumask(cpu); $ find . -name "*.h" | xargs grep clear_tasks_mm_cpumask ./include/linux/cpu.h:void clear_tasks_mm_cpumask(int cpu); $ find . -name "*.S" | xargs grep clear_tasks_mm_cpumask $ Fixes: e1ecbbc3 ("perf probe: Fix to handle optimized not-inlined functions") Reported-by:Arnaldo Carvalho de Melo <acme@kernel.org> Tested-by:
-
Masami Hiramatsu authored
Since there are some DIE which has only ranges instead of the combination of entrypc/highpc, address verification must use dwarf_haspc() instead of dwarf_entrypc/dwarf_highpc. Also, the ranges only DIE will have a partial code in different section (e.g. unlikely code will be in text.unlikely as "FUNC.cold" symbol). In that case, we can not use dwarf_entrypc() or die_entrypc(), because the offset from original DIE can be a minus value. Instead, this simply gets the symbol and offset from symtab. Without this patch; # perf probe -D clear_tasks_mm_cpumask:1 Failed to get entry address of clear_tasks_mm_cpumask Error: Failed to add events. And with this patch: # perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask clear_tasks_mm_cpumask+0 p:probe/clear_tasks_mm_cpumask_1 clear_tasks_mm_cpumask+5 p:probe/clear_tasks_mm_cpumask_2 clear_tasks_mm_cpumask+8 p:probe/clear_tasks_mm_cpumask_3 clear_tasks_mm_cpumask+16 p:probe/clear_tasks_mm_cpumask_4 clear_tasks_mm_cpumask+82 Committer testing: I managed to reproduce the above: [root@quaco ~]# perf probe -D clear_tasks_mm_cpumask:1 p:probe/clear_tasks_mm_cpumask _text+919968 p:probe/clear_tasks_mm_cpumask_1 _text+919973 p:probe/clear_tasks_mm_cpumask_2 _text+919976 [root@quaco ~]# But then when trying to actually put the probe in place, it fails if I use :0 as the offset: [root@quaco ~]# perf probe -L clear_tasks_mm_cpumask | head -5 <clear_tasks_mm_cpumask@/usr/src/debug/kernel-5.2.fc30/linux-5.2.18-200.fc30.x86_64/kernel/cpu.c:0> 0 void clear_tasks_mm_cpumask(int cpu) 1 { 2 struct task_struct *p; [root@quaco ~]# perf probe clear_tasks_mm_cpumask:0 Probe point 'clear_tasks_mm_cpumask' not found. Error: Failed to add events. [root@quaco The next patch is needed to fix this case. Fixes: 576b5237 ("perf probe: Fix probing symbols with optimization suffix") Reported-by: -
Yunfeng Ye authored
There are memory leaks and file descriptor resource leaks in process_mapfile() and main(). Fix this by adding free(), fclose() and free_arch_std_events() on the error paths. Fixes: 80eeb67f ("perf jevents: Program to convert JSON file") Fixes: 3f056b66 ("perf jevents: Make build fail on JSON parse error") Fixes: e9d32c1b ("perf vendor events: Add support for arch standard events") Signed-off-by:
Yunfeng Ye <yeyunfeng@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Hu Shiyuan <hushiyuan@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Luke Mujica <lukemujica@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zenghui Yu <yuzenghui@huawei.com> Link: http://lore.kernel.org/lkml/d7907042-ec9c-2bef-25b4-810e14602f89@huawei.comSigned-off-by:
-
Masami Hiramatsu authored
Fix die_walk_lines() to list the function entry line correctly. Since the dwarf_entrypc() does not return the entry pc if the DIE has only range attribute, __die_walk_funclines() fails to list the declaration line (entry line) in that case. To solve this issue, this introduces die_entrypc() which correctly returns the entry PC (the first address range) even if the DIE has only range attribute. With this fix die_walk_lines() shows the function entry line is able to probe correctly. Fixes: 4cc9cec6 ("perf probe: Introduce lines walker interface") Signed-off-by:
-
Masami Hiramatsu authored
Since some inlined functions are in lexical blocks of given function, we have to recursively walk through the DIE tree. Without this fix, perf-probe -L can miss the inlined functions which is in a lexical block (like if (..) { func() } case.) However, even though, to walk the lines in a given function, we don't need to follow the children DIE of inlined functions because those do not have any lines in the specified function. We need to walk though whole trees only if we walk all lines in a given file, because an inlined function can include another inlined function in the same file. Fixes: b0e9cb28 ("perf probe: Fix to search nested inlined functions in CU") Signed-off-by: -
Masami Hiramatsu authored
Fix die_is_func_instance() to find range-only function instance. In some case, a function instance can be made without any low PC or entry PC, but only with address ranges by optimization. (e.g. cold text partially in "text.unlikely" section) To find such function instance, we have to check the range attribute too. Fixes: e1ecbbc3 ("perf probe: Fix to handle optimized not-inlined functions") Signed-off-by:
-
Igor Lubashev authored
No need for layer violations when a proper evlist api is available. Signed-off-by:
Igor Lubashev <ilubashe@akamai.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/1571795693-23558-4-git-send-email-ilubashe@akamai.comSigned-off-by:
-
Leo Yan authored
Correct typo in comment: s/suck/stuck. Signed-off-by:
Leo Yan <leo.yan@linaro.org> Reported-by:
Will Deacon <will@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191023083324.12093-1-leo.yan@linaro.orgSigned-off-by:
-
Ian Rogers authored
Use realloc() rather than malloc()+memcpy() to possibly avoid a memory allocation when appending array elements. Signed-off-by:
-
Ian Rogers authored
Having a YYABORT in a macro makes it hard to free memory for components of a rule. Separate the logic out. Signed-off-by:
-
Andi Kleen authored
In some weak fallback cases close can be called a lot with -1. Check for this case and avoid calling close then. This is mainly to shut up valgrind which complains about this case. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Andi Kleen authored
In some cases when perf_event_open fails, it may do some closes to clean up. In special cases these closes can fail too, which overwrites the errno of the perf_event_open, which is then incorrectly reported. Save/restore errno around closes. Signed-off-by:
-
Leo Yan authored
Macro TO_CS_QUEUE_NR definition has a typo, which uses 'trace_id_chan' as its parameter, this doesn't match with its definition body which uses 'trace_chan_id'. So renames the parameter to 'trace_chan_id'. It's luck to have a local variable 'trace_chan_id' in the function cs_etm__setup_queue(), even we wrongly define the macro TO_CS_QUEUE_NR, the local variable 'trace_chan_id' is used rather than the macro's parameter 'trace_id_chan'; so the compiler doesn't complain for this before. After renaming the parameter, it leads to a compiling error due cs_etm__setup_queue() has no variable 'trace_id_chan'. This patch uses the variable 'trace_chan_id' for the macro so that fixes the compiling error. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight ml <coresight@lists.linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lore.kernel.org/lkml/20191021074808.25795-1-leo.yan@linaro.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Its a bit annoying to have that message, better make it a debug one. I.e. now this message will only appear when using '-v': [root@quaco tracebuffer]# trace -e bristot.c LLVM: dumping bristot.o ^C[root@quaco tracebuffer]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Bristot de Oliveira <bristot@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-o7jd4i7s66kosec5torubqps@git.kernel.orgSigned-off-by:
-
Adrian Hunter authored
Add a new 'perf record' option '--kcore' which will put a copy of /proc/kcore, kallsyms and modules into a perf.data directory. Note, that without the --kcore option, output goes to a file as previously. The tools' -o and -i options work with either a file name or directory name. Example: $ sudo perf record --kcore uname $ sudo tree perf.data perf.data ├── kcore_dir │ ├── kallsyms │ ├── kcore │ └── modules └── data $ sudo perf script -v build id event received for vmlinux: 1eaa285996affce2d74d8e66dcea09a80c9941de build id event received for [vdso]: 8bbaf5dc62a9b644b4d4e4539737e104e4a84541 Samples for 'cycles' event do not have CPU attribute set. Skipping 'cpu' field. Using CPUID GenuineIntel-6-8E-A Using perf.data/kcore_dir/kcore for kernel data Using perf.data/kcore_dir/kallsyms for symbols perf 19058 506778.423729: 1 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux) perf 19058 506778.423733: 1 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux) perf 19058 506778.423734: 7 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux) perf 19058 506778.423736: 117 cycles: ffffffffa2caa54a native_write_msr+0xa (vmlinux) perf 19058 506778.423738: 2092 cycles: ffffffffa2c9b7b0 native_apic_msr_write+0x0 (vmlinux) perf 19058 506778.423740: 37380 cycles: ffffffffa2f121d0 perf_event_addr_filters_exec+0x0 (vmlinux) uname 19058 506778.423751: 582673 cycles: ffffffffa303a407 propagate_protected_usage+0x147 (vmlinux) uname 19058 506778.423892: 2241841 cycles: ffffffffa2cae0c9 unwind_next_frame.part.5+0x79 (vmlinux) uname 19058 506778.424430: 2457397 cycles: ffffffffa3019232 check_memory_region+0x52 (vmlinux) Committer testing: # rm -rf perf.data* # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.024 MB perf.data (7 samples) ] # ls -l perf.data -rw-------. 1 root root 34772 Oct 21 11:08 perf.data # perf record --kcore uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.024 MB perf.data (7 samples) ] ls[root@quaco ~]# ls -lad perf.data* drwx------. 3 root root 4096 Oct 21 11:08 perf.data -rw-------. 1 root root 34772 Oct 21 11:08 perf.data.old # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # perf evlist -v -i perf.data/data cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # Signed-off-by: -
Adrian Hunter authored
Support directory output that contains a regular perf.data file, named "data". By default the directory is named perf.data i.e. perf.data └── data Most of the infrastructure to support a directory is already there. This patch makes the changes needed to support the format above. Presently there is no 'perf record' option to output a directory. This is preparation for adding support for putting a copy of /proc/kcore in the directory. Signed-off-by:
-
