- 04 Apr, 2019 40 commits
-
-
Fabrice Gasnier authored
Move DMA enable (e.g. set RDMAEN bit) away from start_conv() that is used for both buffer and single conversions. Thus, single conv rely on interrupt, not dma. Note: take care to prepare all DMA stuff and set RDMAEN before starting filter (can be set only when DFEN=0). This is precursor patch to ease support of triggered buffer mode. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Fabrice Gasnier authored
DFSDM regular continuous mode usage depends on current mode (not DMA): - for single conversion, RCONT doesn't need to be set. - for buffer mode, RCONT has to be set (e.g. INDIO_BUFFER_SOFTWARE used by audio currently). This is related to filter configuration, move it to relevant routine. This is precursor patch to ease support of triggered buffer mode. Signed-off-by:
-
Fabrice Gasnier authored
Current ckout divider may be set to a value that makes ckout to exceed spi-max-frequency. Rather use lower value (e.g. round up divider when ckout isn't accurate). Also when the SPI clock isn't accurate, 'spi_master_freq' is filled in with expected frequency. Use computed value instead to be more accurate: - e.g. source clock / (CKOUTDIV + 1) Enforce checks on the divider: ckoutdiv range can be from 1-255 to provide divider of 2-256. Signed-off-by:
-
Marcelo Schmitt authored
Change device attributes' names to match ABI documentation. Names were chosen such that they tend to be similar to existing ABI so it should be easier to standardize them when necessary. Signed-off-by:
Marcelo Schmitt <marcelo.schmitt1@gmail.com> Signed-off-by:
-
Vladimir Petrigo authored
- Fix CHECK Macro argument 'wordsize' may be better as '(wordsize)' to avoid precedence issues Slightly modified by Jonathan to take into account the staging graduation and a copy and paste version of the same item on the following line. Signed-off-by:
Vladimir Petrigo <vladimir.petrigo@gmail.com> Signed-off-by:
-
Alexandru Ardelean authored
Final part of the re-organization. Move the `adis16400.h` into `adis16400.c` since it no longer needs to be shared among other files. Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
-
Alexandru Ardelean authored
This change does a simple 1-to-1 rename of the adis16400_core.c file. Now that the `adis16400_buffer.c` file was removed, everything can be moved into a single driver file. But first, this rename. Signed-off-by:
-
Alexandru Ardelean authored
This change has been done separately, so that it's easier to visualize the changed logic in the adis_scan_update() function. Most of the function in this `adis16400_update_scan_mode()` that deals with burst-mode will be re-used in the ADIS16480, but with different parameters. Signed-off-by:
-
Alexandru Ardelean authored
Some variants in the ADIS16400 family support burst mode. This mechanism is implemented in the `adis16400_buffer.c` file. Some variants in ADIS16480 are also adding burst mode, which is functionally similar to ADIS16400, but with different parameters. To get there, a `adis_burst` struct is added to parametrize certain bits of the SPI communication to setup: the register that triggers burst-mode, and the extra-data-length that needs be accounted for when building the bust-length buffer. The trigger handler cannot be made generic, since it's very specific to each ADIS164XX family. A future enhancement of this `adis_burst` mode will be the possibility to enable/disable burst-mode. For the ADIS16400 family it's hard-coded to on by default. But for ADIS16480 there will be a need to disable this. When that will be implemented, both ADIS16400 & ADIS16480 will have the burst-mode enable-able/disable-able. Signed-off-by:
-
Alexandru Ardelean authored
The trigger handler for the ADIS16400 is very different from the generic one in the ADIS library. Keeping it in a separate file won't make much sense once the update_scan_mode function will be made more generic and moved into the ADIS library. Signed-off-by:
-
Cristian Sicilia authored
Fix CamelCase naming. Signed-off-by:
Cristian Sicilia <sicilia.cristian@gmail.com> Signed-off-by:
-
Cristian Sicilia authored
Creating a temporary variable to improve readability Signed-off-by:
-
Cristian Sicilia authored
Enclosing parameter with parenthesis due to avoid possible precedence issue. Signed-off-by:
-
Andreas Klinger authored
add a maintainer for the newly created ultrasonic driver family of maxbotix Signed-off-by:
Andreas Klinger <ak@it-klinger.de> Signed-off-by:
-
Andreas Klinger authored
Add I2CXL-MaxSonar ultrasonic distance sensors of types mb1202, mb1212, mb1222, mb1232, mb1242, mb7040, mb7137 using an i2c interface Implemented functionality: - reading the distance via in_distance_raw - buffered mode with trigger - make use of interrupt to announce completion of ranging Add mb1232 driver to Kconfig and Makefile Signed-off-by:
-
Andreas Klinger authored
Add doc for dt binding maxbotix,mb1232. This binding is for MaxBotix I2CXL-MaxSonar ultrasonic rangers which share a common i2c interface. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Andreas Klinger authored
Add MaxBotix, which is a vendor of ultrasonic rangers in different varieties and interfaces. Signed-off-by:
Andreas Färber <afaerber@suse.de> Reviewed-by:
-
Kangjie Lu authored
devm_regmap_init_i2c may fail and return NULL. The fix returns the error when it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Marcelo Schmitt authored
Add an ABI documentation for the ad5933 driver. Signed-off-by:
-
Marcelo Schmitt authored
Remove the previous comment about direct access via sysfs which would lead one think ad5933 driver has limitations it actually doesn't. Signed-off-by:
-
Marcelo Schmitt authored
Add SPDX identifier of GPL-2.0 for the ad5933 driver. Signed-off-by:
-
Marcelo Schmitt authored
Organize includes to list them in lexicographic order. Signed-off-by:
-
Marcelo Schmitt authored
Make multi-line comments compliant with the preferred code style. Signed-off-by:
-
Renato Lui Geh authored
Adds a device tree binding for the ad7780 driver. Signed-off-by:
Renato Lui Geh <renatogeh@gmail.com> Signed-off-by:
-
Renato Lui Geh authored
Move ad7780 ADC driver out of staging and into the mainline. The ad7780 is a sigma-delta analog to digital converter. This driver provides reading voltage values and status bits from both the ad778x and ad717x series. Its interface also allows writing on the FILTER and GAIN GPIO pins on the ad778x. Signed-off-by:
Giuliano Belinassi <giuliano.belinassi@usp.br> Co-developed-by:
-
Renato Lui Geh authored
This patch adds a new copyright holder to the ad7780 driver. Signed-off-by:
-
Renato Lui Geh authored
Add SPDX identifier (GPL-2.0) to the AD7780 driver. Signed-off-by:
-
Renato Lui Geh authored
To maintain consistency between ad7780_probe and ad7780_remove orders, regulator initialization has been moved to after GPIO initializations. Signed-off-by:
-
Renato Lui Geh authored
The ad7780 supports both the ad778x and ad717x families. Each chip has a corresponding ID. This patch provides a mask for extracting ID values from the status bits and also macros for the correct values for the ad7170, ad7171, ad7780 and ad7781. Signed-off-by:
-
Renato Lui Geh authored
The AD7780 driver contains status pattern bits designed for checking whether serial transfers have been correctly performed. Pattern macros were previously generated through bit fields. This patch sets good pattern values directly and masks through GENMASK. Signed-off-by:
-
Renato Lui Geh authored
This patch adds the new feature of reading the filter odr value for ad778x chips. This value is stored in the chip's state struct whenever a read or write call is performed on the chip's driver. This feature requires sharing SAMP_FREQ. Since the ad717x does not have a filter option, the driver only shares the relevant info mask for the ad778x family. Signed-off-by:
-
Renato Lui Geh authored
This patch adds a new functionality of reading gain values from the ad778x chips. This value is stored in the chip's state struct and is updated whenever a read or write call is performed on the driver. Signed-off-by:
-
Renato Lui Geh authored
This patch simply adds a missing switch default case in read_raw. Signed-off-by:
-
Renato Lui Geh authored
Previously, the AD7780 driver only supported gpio for the 'powerdown' pin. This commit adds suppport for the 'gain' and 'filter' pin. Signed-off-by:
-
Gregory CLEMENT authored
As most of the other ADC the lpc32xx one use a vref-supply property: document it. Reviewed-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by:
-
Gregory CLEMENT authored
Until now this driver only exposed the raw value of the channels. With this patch, the scale value is also exposed. It depends of a regulator supply, and unlike most of the other driver, do not having this regulator won't prevent to use the driver. The reason for it is to allow to continue to use this driver with an old device tree. If there is no regulator supply then the scale won't be exposed. Signed-off-by:
-
Gregory CLEMENT authored
A few headers is useless: remove them. Signed-off-by:
-
Gregory CLEMENT authored
Sort the headers in alphabetic order in order to ease the maintenance for this part. Signed-off-by:
-
Mircea Caprioru authored
This patch will remove platform data members and replace them with device tree properties. These properties will be subject to further modifications and probably replaced with other functionalities at some point in time. Signed-off-by:
Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
