- 23 Oct, 2010 8 commits
-
-
Matti Aaltonen authored
Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Matti Aaltonen authored
Add a couple of words about the spacing field in the HW seek struct, also a few words about the new RDS tuner capability flags V4L2_TUNER_CAP_RDS_BLOCK-IO and V4L2_TUNER_CAP_RDS_CONTROLS. Signed-off-by:
Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Acked-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
- serialize the suspend and resume functions using the global lock. - do not call usb_autopm_put_interface after a disconnect. - fix a race when disconnecting the device. Reported-by:
David Ellingsworth <david@identd.dyndns.org> Signed-off-by:
-
Joe Perches authored
Use the standard error logging mechanisms. Add #define pr_fmt(fmt) KBUILD_MODNAME ":%s" fmt, __func__ Remove __func__ from err calls, add '\n', rename to pr_err Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Julia Lawall authored
Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Malcolm Priestley authored
These include -later kill of usb_buffer to avoid kernel crash on hot unplugging. -DiSEqC functions. -LNB Power switch -Faster channel change. -support for LG tuner on LME2510C. -firmware switching for LG tuner. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Sylwester Nawrocki authored
> From: Dan Carpenter [mailto:error27@gmail.com] > > These are signed so instead of being 1 and 0 as intended they are -1 and > 0. It doesn't cause a bug in the current code but Sparse warns about > it: > > drivers/media/video/s5p-fimc/fimc-core.h:226:28: > error: dubious one-bit signed bitfield > struct fimc_scaler { > - int scaleup_h:1; > - int scaleup_v:1; > - int copy_mode:1; > - int enabled:1; > + unsigned int scaleup_h:1; > + unsigned int caleup_v:1; > + unsigned int copy_mode:1; > + unsigned int enabled:1; In general I agree, however this patch would change scaleup_v:1 to caleup_v, so it cannot be applied in current form. Here is the corrected patch: Reported-by: Dan Carpenter <error27@gmail.com< Signed-off-by:Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Dan Carpenter authored
There was an unlock missing if kzalloc() failed. Signed-off-by:
Dan Carpenter <error27@gmail.com> Acked-by:
-
- 22 Oct, 2010 32 commits
-
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL. The sub-devices without a listed module name don't result in and I2C sub-device being created, as they either are IR devices or don't have an I2C address listed. It's thus safe to rely on modaliases only. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the cx18 driver uses. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL. The sub-devices without a listed module name don't result in and I2C sub-device being created, as they either are IR devices or don't have an I2C address listed. It's thus safe to rely on modaliases only. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the ivtv driver uses. Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, don't use the module names hardcoded in platform data by passing a NULL module name to those functions. The only platform using the VPIF capture device (DM646x EVM) hardcodes the module names to invalid values (tvp514x-0 and tvp514x-1). As this is already broken, there's no risk of breaking it more. Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, don't use the module names hardcoded in platform data by passing a NULL module name to those functions. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the vpif_display platform data uses. Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, don't use the module names hardcoded in platform data by passing a NULL module name to those functions. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the vpfe_capture platform data uses. Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, remove the module names hardcoded in platform data and pass a NULL module name to those functions. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the soc_camera platform data uses. Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL. As no board seems to use this driver, no platform data has been checked. Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, remove the module names hardcoded in platform data and pass a NULL module name to those functions. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the sh_vou platform data uses. Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the pvrusb2 driver uses. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the zoran driver uses. Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the go7007 driver uses. Signed-off-by:
-
Laurent Pinchart authored
The TW2804 I2C sub-device type name was incorrectly set to wis_twTW2804 for the adlink mpg24 board. Rename it to wis_tw2804. Signed-off-by:
-
Laurent Pinchart authored
The device table is required to load modules based on modaliases. Signed-off-by:
-
Laurent Pinchart authored
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the drivers modified here use. Signed-off-by:
-
Laurent Pinchart authored
When creating a new sub-device, The V4L I2C subdev API has historically required drivers to pass the name of the module that implements support for the I2C device. I2C modules can be loaded based on modaliases instead of the module name. As the I2C device type name is already available to the v4l2_i2c_new_subdev* functions, make the module name argument optional and create a modalias based on the type name when no module name is provided. All in-tree drivers call those functions with a non-NULL module name argument, this change is thus harmless. Signed-off-by:
-
Dan Carpenter authored
This was supposed to be an unlock on the error path. Signed-off-by:
Devin Heitmueller <dheitmueller@hauppauge.com> Cc: Palash Bandyopadhyay < palash.bandyopadhyay@conexant.com> Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Anysee remote controller keytable. Uses NEC address 0x08. Signed-off-by:
-
Dan Carpenter authored
Fixes a gcc warning: drivers/media/video/cx88/cx88-video.c:772: warning: ‘core’ may be used uninitialized in this function Signed-off-by:
-
Adrian Taylor authored
This patch allows this device successfully to show video, at least from its composite input. I have no information about the true hardware contents of this device and so this patch is based solely on fiddling with things until it worked. The chip appears to be em2860, and the closest device with equivalent inputs is the Typhoon DVD Maker. Copying the settings for that device appears to do the trick. That's what this patch does. [mchehab@redhat.com: update CARDLIST.em28xx accordingly, via script] Signed-off-by:
Adrian Taylor <adrian.taylor@realvnc.com> Reviewed-by:
-
Mauro Carvalho Chehab authored
Fix a few troubles at the card entries Signed-off-by: -
Jarod Wilson authored
Provides more complete debug spew, parses individual commands and raw IR data one chunk at a time. Signed-off-by:
-
Jarod Wilson authored
And replace usage of hex values w/symbolic names wherever possible Signed-off-by:
-
Mauro Carvalho Chehab authored
It is better to use a per-model device name, especially on multi-function devices like Polaris. So, allow overriding the default name at the mceusb model table. Signed-off-by:
-
Mauro Carvalho Chehab authored
Especially when used with Polaris boards, devices may have different types of remotes shipped. So, we need a per-model rc-map. Signed-off-by:
-
Mauro Carvalho Chehab authored
The previous logic needed duplicate USB table structs, one to store the list of the devices, and 3 sets of other structs, to store the quirks list. With this change, devices that require expecial quirks just need to have a .driver_info = <quirk entry>. It also allows adding some extra quirks, like per-model RC tables. As a bonus, this patch reduced in 10% the data segment size: text data bss dec hex filename 15487 5008 4 20499 5013 old/mceusb.ko 15438 4496 4 19938 4de2 new/mceusb.ko Signed-off-by:
-
Mauro Carvalho Chehab authored
Switch to a state machine that properly handles all incoming urb data packets, and reads much cleaner and corrects some minor parsing errors that were hindering decode on cx231xx/Polaris integrated IR. Also tested with four different mceusb variants, and works perfectly with all of them (at least for the rc6a mce remotes). Signed-off-by:
-
Jarod Wilson authored
Jochen Kühner reports lirc_it87 works with his hardware with this device ID. Tested-by:
Jochen Kühner <jochen.kuehner@gmx.de> Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Tighten up error checking, rename some functions to less generic names, remove unnecessary cruft, add missing debug modparam wiring, and fix up some printk output. Signed-off-by:
-
Jarod Wilson authored
Talked to Christoph Bartelmus about this a bit, and he says this driver actually *should* work okay on CONFIG_SMP, the check was a legacy one from the very early days of SMP support before it had stabilized (yes, this driver is that ancient). Also remove some completely unused code, only noticed after building this driver for the first time in an eternity (on an SMP host now, of course). Signed-off-by:
-
