Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Kill off the __div_table reference, modern compilers don't have it,
and old compilers can't build the sh64 kernel anyways.

__copy_user also needs to be exported to satisfy module builds.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Use more of the generic section helpers, and get the alignment
for some of the sections reduced. Follows the sh change.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This is just dead code, kill it off..
Reported-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

There's no supported GDB stub in the kernel, kill off the dead
config option for it.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Dependency cleanup. The non-cayman boards don't have the mach callbacks
for this and build error badness ensues.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

defconfigs for the simulator and ST50-HARP.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Now that the ROM-RAM and generic boards are killed off, refactor
the dependencies accordingly. Those were the only special cases,
so all of the Kconfig dependency hell gets much cleaner as a result.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The consistent DMA stuff was evolved from the old PCI DMA mapping
functions. As this has been overhauled, it's something that is
used by the generic DMA mapping code, and thus, has no intrinsic
PCI dependence.

Move the routines somewhere more sensible (same place as sh), and
fix up the build for CONFIG_PCI=n in the process.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This fixes up misc build issues that were hit on the non-cayman
boards. Additionally, quite a few symbols needed to be exported
to fix the module build.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Follow the mach-harp changes to get the simulator support building.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Get the ST50-HARP building again.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This is already enabled through lib/Kconfig.debug, kill off the
architecture specific one.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The generic board stubs were never added, and the ROM-RAM boards
never made it in to the wild. Neither one has any users, and both
are utterly broken in-tree (likely since 2.4). Kill them both off.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

There were quite a few left over includes from code that was removed
long ago, rip out the stuff we no longer need.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

These were implemented using an ugly macro for just simple wrapping,
so we just make the wrapping explicit and move it to io.h instead.

Also fixes up some modules:

  CC [M]  drivers/net/8390.o
  In file included from drivers/net/8390.c:6:
  drivers/net/lib8390.c: In function 'ei_start_xmit':
  drivers/net/lib8390.c:329: error: implicit declaration of function 'outb_p'
  drivers/net/lib8390.c: In function '__ei_interrupt':
  drivers/net/lib8390.c:457: error: implicit declaration of function 'inb_p'
  make[2]: *** [drivers/net/8390.o] Error 1
  make[1]: *** [drivers/net] Error 2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

The new behaviour of CFS exposes a race which occurs if a switch is
requested when vt_mode.mode is VT_PROCESS.

The process with vc->vt_pid is signaled before vc->vt_newvt is set.
This causes the switch to fail when triggered by the monitoing process
because the target is still -1.

[ If the signal sending fails, the subsequent "reset_vc(vc)" will then
  reset vt_newvt to -1, so this works for that case too.   - Linus ]
Signed-off-by: Jan Lübbe <jluebbe@lasnet.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  mv643xx_eth: Check ETH_INT_CAUSE_STATE bit

The comment being removed by this patch is incorrect and misleading.

In the following situation:

	1. load  ...
	2. store 1 -> X
	3. wmb
	4. rmb
	5. load  a <- Y
	6. store ...

4 will only ensure ordering of 1 with 5.
3 will only ensure ordering of 2 with 6.

Further, a CPU with strictly in-order stores will still only provide that
2 and 6 are ordered (effectively, it is the same as a weakly ordered CPU
with wmb after every store).

In all cases, 5 may still be executed before 2 is visible to other CPUs!

The additional piece of the puzzle that mb() provides is the store/load
ordering, which fundamentally cannot be achieved with any combination of
rmb()s and wmb()s.

This can be an unexpected result if one expected any sort of global ordering
guarantee to barriers (eg. that the barriers themselves are sequentially
consistent with other types of barriers).  However sfence or lfence barriers
need only provide an ordering partial ordering of memory operations -- Consider
that wmb may be implemented as nothing more than inserting a special barrier
entry in the store queue, or, in the case of x86, it can be a noop as the store
queue is in order. And an rmb may be implemented as a directive to prevent
subsequent loads only so long as their are no previous outstanding loads (while
there could be stores still in store queues).

I can actually see the occasional load/store being reordered around lfence on
my core2. That doesn't prove my above assertions, but it does show the comment
is wrong (unless my program is -- can send it out by request).

So:
   mb() and smp_mb() always have and always will require a full mfence
   or lock prefixed instruction on x86.  And we should remove this comment.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Paul McKenney <paulmck@us.ibm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 468d09f8 masked the "state"
interrupt (bit 20 of the cause register). This results in Radstone's
PPC7D repeatedly re-entering the interrupt routine, locking up the
board. The following patch returns the required handling for this
interrupt.
Signed-off-by: Martyn Welch <martyn.welch@radstone.co.uk>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

Linas reported me that some machines were crashing at boot in
quirk_e100_interrupt. It appears that this quirk is doing an ioremap
directly on a PCI BAR value, which isn't legal and will cause all sorts
of bad things to happen on architectures where PCI BARs don't directly
match processor bus addresses.

This fixes it by using the proper PCI resources instead which is possible
since the quirk has been moved by a previous commit to happen late enough
for that.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: Fix MD5 signature handling on big-endian.
  [NET]: Zero length write() on socket should not simply return 0.

Input: xpad - fix dependancy on LEDS class

The driver can not be built-in when LEDS class is a module.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It doesn't look as if the NFS file name limit is being initialised correctly
in the struct nfs_server. Make sure that we limit whatever is being set in
nfs_probe_fsinfo() and nfs_init_server().

Also ensure that readdirplus and nfs4_path_walk respect our file name
limits.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-2.6.23' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc:
  [POWERPC] mpc8349emitx.dts: Setup USB-DR for peripheral mode.
  [POWERPC] Fix mpc834x USB-MPH configuration.
  [POWERPC] Fix cpm_uart driver for cpm1 machines
  [PPC] Fix cpm_dpram_addr returning phys mem instead of virt mem
  [POWERPC] Fix copy'n'paste typo in commproc.c

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  e1000: Add device IDs of blade version of the 82571 quad port
  sky2: fix transmit state on resume
  sky2: FE+ vlan workaround
  sky2: sky2 FE+ receive status workaround

Based upon a report and initial patch by Peter Lieven.

tcp4_md5sig_key and tcp6_md5sig_key need to start with
the exact same members as tcp_md5sig_key.  Because they
are both cast to that type by tcp_v{4,6}_md5_do_lookup().

Unfortunately tcp{4,6}_md5sig_key use a u16 for the key
length instead of a u8, which is what tcp_md5sig_key
uses.  This just so happens to work by accident on
little-endian, but on big-endian it doesn't.

Instead of casting, just place tcp_md5sig_key as the first member of
the address-family specific structures, adjust the access sites, and
kill off the ugly casts.
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix fallocate on o32 binary compat ABI
  [MIPS] Fix CONFIG_BUILD_ELF64 kernels with symbols in CKSEG0.
  [MIPS] IP32: Fix initialization of UART base addresses.

MIPS was mistakenly forgetting to use the fallocate compat wrapper, which
I noticed while cleaning up all the duplicate fallocate wrappers.
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The __pa() for those did assume that all symbols have XKPHYS values and
the math fails for any other address range.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup:
  [x86 setup] Correct the SMAP check for INT 0x15, AX=0xe820

The e820 probe code was checking %edx, not %eax, for the SMAP
signature on return.  This worked on *almost* all systems, since %edx
still contained SMAP from the call on entry, but on a handful of
systems it failed -- plus, we would have missed real mismatches.

The error output is "=d" to make sure gcc knows %edx is clobbered
here.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Setup dr_mode for USB-DR to peripheral as the default (host mode) doesn't make
much sense for the mini-AB connector on the ITX board.

Peripheral mode is preferable to OTG as the fsl_usb2_udc.c driver doesn't yet
properly support it.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

mpc834x USB-MPH configuration got broken by commit
6f442560021aecf08658e26ed9a37e6928ef0fa1. The selection bits in SICRL
should be cleared rather than set to configure the USB MUXes for the MPH.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

in cpm_uart_cpm1.h, DPRAM_BASE is assigned an address derived from cpmp.
On ARC=ppc, this is a physical address with 1:1 DMA mapping which can't
be used for arithmetric compare operations with virtual addresses
returned by cpm_dpram_addr. This patch changes the assignment to use
cpm_dpram_addr as well, like in cpm_uart_cpm2.h.
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

cpm_dpram_addr returns physical memory of the DP RAM instead of
iomapped virtual memory. As there usually is a 1:1 MMU map of
the IMMR area, this is often not noticed. However, cpm_dpram_phys
assumes this iomapped virtual memory and returns garbage on the
1:1 mapped memory causing CPM1 uart console to fail.

This patch fixes the problem (copied from the powerpc tree).
Signed-off-by: Jochen Friedrich <jochen@scram.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>