- 25 Mar, 2006 1 commit
-
-
maximilian attems authored
The icom driver uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by:
maximilian attems <maks@sternwelten.at> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
- 24 Mar, 2006 39 commits
-
-
Horms authored
net: ne2k.c won't compile if pci_clone_list is const f71e1309 which (amongst other things) made pci_clone_list in ne2k-pci.c const causes the following compile error. This patch reverses that portion of that changeset drivers/net/ne2k-pci.c:123: error: pci_clone_list causes a section type conflict ~/ gcc --version gcc (GCC) 4.0.3 (Debian 4.0.3-1) ~/ dpkg gcc-4.0 | grep Version Version: 4.0.3-1 Signed-Off-By: Horms <horms@verge.net.au ne2k-pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) cee0890cc97247b6a9decd94f5dc0719ac8f0b1b Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Andrew Victor authored
This patch adds support for the Ethernet controller integrated in the Atmel AT91RM9200 SoC processor. Changes since the previous submission (01/02/2006) are: - Make use of the clk.h clock infrastructure. - The multicast hash function is not crc32. [Patch by Pedro Perez] Signed-off-by:
Andrew Victor <andrew@sanpeople.com> Signed-off-by:
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] libata: Remove dependence on host_set->dev for SAS [PATCH] libata: ata_scsi_ioctl cleanup [PATCH] libata: ata_scsi_queuecmd cleanup [libata] export ata_dev_pair; trim trailing whitespace [PATCH] libata: add ata_dev_pair helper [PATCH] Make libata not powerdown drivers on PM_EVENT_FREEZE. [PATCH] libata: make ata_set_mode() responsible for failure handling [PATCH] libata: use ata_dev_disable() in ata_bus_probe() [PATCH] libata: implement ata_dev_disable() [PATCH] libata: check if port is disabled after internal command [PATCH] libata: make per-dev transfer mode limits per-dev [PATCH] libata: add per-dev pio/mwdma/udma_mask [PATCH] libata: implement ata_unpack_xfermask() [libata] Move some bmdma-specific code to libata-bmdma.c [libata sata_uli] kill scr_addr abuse [libata sata_nv] eliminate duplicate codepaths with iomap [libata sata_nv] cleanups: convert #defines to enums; remove in-file history [libata sata_sil24] cleanups: use pci_iomap(), kzalloc()
-
Andrew Morton authored
uevent_seqnum and uevent_helper are only defined if CONFIG_HOTPLUG=y, CONFIG_NET=n. (I stole this back from Greg's tree - it makes allnoconfig work). Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Davi Arnaut authored
Copies user-space string with strndup_user() and moves the type string duplication code to a function (thus fixing a wrong check on the length of the type.) Signed-off-by:
Davi Arnaut <davi.arnaut@gmail.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Davi Arnaut authored
Change hand-coded userspace string copying to strndup_user. Signed-off-by:
-
Davi Arnaut authored
This patch series creates a strndup_user() function to easy copying C strings from userspace. Also we avoid common pitfalls like userspace modifying the final \0 after the strlen_user(). Signed-off-by:
-
Ingo Molnar authored
Make the softlockup detector purely timer-interrupt driven, removing softirq-context (timer) dependencies. This means that if the softlockup watchdog triggers, it has truly observed a longer than 10 seconds scheduling delay of a SCHED_FIFO prio 99 task. (the patch also turns off the softlockup detector during the initial bootup phase and does small style fixes) Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Sergey Vlasov authored
If the change of personality does not lead to change of exec domain, __set_personality() returned without releasing the module reference acquired by lookup_exec_domain(). Signed-off-by:
Sergey Vlasov <vsu@altlinux.ru> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Glauber de Oliveira Costa authored
In filesystems with the meta block group flag on, ext3_bg_num_gdb() fails to report the correct number of blocks used to store the group descriptor backups in a given group. It happens because meta_bg follows a different logic from the original ext3 backup placement in groups multiples of 3, 5 and 7. Signed-off-by:
Glauber de Oliveira Costa <glommer@br.ibm.com> Cc: Andreas Dilger <adilger@clusterfs.com> Cc: "Stephen C. Tweedie" <sct@redhat.com> Cc: Alex Tomas <alex@clusterfs.com> Signed-off-by:
-
Andrew Morton authored
Document the fact that setrlimit(RLIMIT_CPU) doesn't return error codes when it should. I don't think we can fix this without a 2.7.x.. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by:
-
Andrew Morton authored
At present the kernel doesn't honour an attempt to set RLIMIT_CPU to zero seconds. But the spec says it should, and that's what 2.4.x does. Fixing this for real would involve some complexity (such as adding a new it-has-been-set flag to the task_struct, and testing that everwhere, instead of overloading the value of it_prof_expires). Given that a 2.4 kernel won't actually send the signal until one second has expired anyway, let's just handle this case by treating the caller's zero-seconds as one second. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Acked-by:
-
Andrew Morton authored
- Whitespace cleanups - Make that expression comprehensible. There's a potential logic change here: we do the "is it_prof_expires equal to zero" test after converting it to seconds, rather than doing the comparison between raw cputime_t's. But given that it's in units of seconds anyway, that shouldn't change anything. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ulrich Weigand <uweigand@de.ibm.com> Cc: Cliff Wickman <cpw@sgi.com> Signed-off-by:
-
Christoph Hellwig authored
Drivers have no business looking at the task list and thus using this lock. The only possibly modular users left are: arch/ia64/kernel/mca.c drivers/edac/edac_mc.c fs/binfmt_elf.c which I'll send out fixes for soon. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Alan Cox authored
- Remove more unused headers - Remove various typedefs - Correct type of PaddrP (physical addresses should be ulong) - Kill use of bcopy - More printk cleanups - Kill true/false - Clean up direct access to pci BARs Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Alan Cox authored
- Remove more unused headers - Remove various typedefs - Correct type of PaddrP (physical addresses should be ulong) - Kill use of bcopy - More printk cleanups - Kill true/false - Clean up direct access to pci BARs Signed-off-by:
-
Alan Cox authored
Final polish. There is no more save_flags/cli type locking left. We also no longer use the pcicopy function and file so they can go. Signed-off-by:
-
Alan Cox authored
Third large chunk of code cleanup. The split between this and #3 and #4 is fairly arbitary and due to the message length limit on the list. These patches continue the process of ripping out macros and typedefs while cleaning up lots of 32bit assumptions. Several inlines for compatibility also get removed and that causes a lot of noise. Signed-off-by:
-
Alan Cox authored
Second large chunk of code cleanup. The split between this and #3 and #4 is fairly arbitary and due to the message length limit on the list. These patches continue the process of ripping out macros and typedefs while cleaning up lots of 32bit assumptions. Several inlines for compatibility also get removed and that causes a lot of noise. Signed-off-by:
-
Alan Cox authored
First large chunk of code cleanup. The split between this and #3 and #4 is fairly arbitary and due to the message length limit on the list. These patches continue the process of ripping out macros and typedefs while cleaning up lots of 32bit assumptions. Several inlines for compatibility also get removed and that causes a lot of noise. Signed-off-by:
-
Alan Cox authored
More header cleanups, strip out typedefs and remove cruft. There are a lot of magic macros that can go and also a great deal of abuse of volatile that is not needed any more as this patch set cleans up the misuse of pointer access to ISA and PCI space. It now builds cleanly on 64bit, although there is more work left to do Signed-off-by:
-
Alan Cox authored
After the indent we can now clean up unused code, and fix all myriad cases that don't use readb/writeb properly. Signed-off-by:
-
Alan Cox authored
This is the result of indent -kr -i8 -bri0 -l255 Signed-off-by:
-
Alan Cox authored
Strip some of the typedef mess out Remove a small subset of unused defines and the like. Signed-off-by:
-
Takashi Iwai authored
Fixes for annoying gcc-4.1 compile warnings "value computed not used". Simply cast to void. (akpm: Linus will go ballistic...) Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Christoph Hellwig authored
Announce that the kernel_thread export will be removed in half a year, after all it's users have been converted to the kthread_ API, which I plan to do over the next month. Signed-off-by:
-
Kumar Gala authored
In some embedded systems the IDE hardware interface may only support 16-bit or smaller accesses. Allow the interface to specify if this is the case and don't allow the drive or user to override the setting. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Acked-by:
Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Adrian Bunk authored
On architectures like i386, the "Multimedia Capabilities Port drivers" menu is visible, but it can't be visited since it contains nothing usable for !ARCH_SA1100. This patch therefore shows this menu only on ARCH_SA1100. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Kyle McMartin authored
If we don't want sys_newfstatat because __ARCH_WANT_STAT64 is defined, then we certainly don't want compat_sys_newfstatat either. Signed-off-by:
Grant Grundler <grundler@parisc-linux.org> Signed-off-by:
Kyle McMartin <kyle@parisc-linux.org> Signed-off-by:
-
John Z. Bohach authored
It appears that console_setup() code only gets compiled into the kernel if CONFIG_PRINTK is enabled. One detrimental side-effect of this is that serial8250_console_setup() never gets invoked when CONFIG_PRINTK is not set, resulting in baud rate not being read/parsed from command line (i.e. console=ttyS0,115200n8 is ignored, at least the baud rate part...) Attached patch moves console_setup() code from inside #ifdef CONFIG_PRINTK to outside (in printk.c), removing dependence on said config. option. Signed-off-by:
-
Nico Schottelius authored
I today booted the first time my embedded device using Linux 2.6.15.2, which was booted by pxelinux, which then bootet itself from the nfsroot. This went pretty fine, but when I was reading through Documentation/nfsroot.txt I saw that there are some more modern versions available of loading the kernel and passing parameters. Signed-off-by:
Nico Schottelius <nico-kernel@schottelius.org> Signed-off-by:
-
Pierre Ossman authored
Driver for the Secure Digital Host Controller Interface specification. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Pierre Ossman authored
Class code and register definitions for the Secure Digital Host Controller standard. Signed-off-by:
-
Andrew Morton authored
No need to duplicate all that code. Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Andrew Morton authored
Pull the guts out of do_fsync() - we can use it elsewhere. Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Andrew Morton authored
msync() does a strange thing. Essentially: vma = find_vma(); for ( ; ; ) { if (!vma) return -ENOMEM; ... vma = vma->vm_next; } so an msync() request which starts within or before a valid VMA and which ends within or beyond the final VMA will incorrectly return -ENOMEM. Fix. Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: -
Andrew Morton authored
It seems bad to hold mmap_sem while performing synchronous disk I/O. Alter the msync(MS_SYNC) code so that the lock is released while we sync the file. Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Andrew Morton authored
It seems sensible to perform dirty page throttling in msync: as the application dirties pages we can kick off pdflush early, or even force the msync() caller to perform writeout, or even throttle the msync() caller. The main effect of this is to start disk writeback earlier if we've just discovered that a large amount of pagecache has been dirtied. (Otherwise it wouldn't happen for up to five seconds, next time pdflush wakes up). It also will cause the page-dirtying process to get panalised for dirtying those pages rather than whacking someone else with the problem. We should do this for munmap() and possibly even exit(), too. We drop the mmap_sem while performing the dirty page balancing. It doesn't seem right to hold mmap_sem for that long. Note that this patch only affects MS_ASYNC. MS_SYNC will be syncing all the dirty pages anyway. We note that msync(MS_SYNC) does a full-file-sync inside mmap_sem, and always has. We can fix that up... The patch also tightens up the mmap_sem coverage in sys_msync(): no point in taking it while we perform the incoming arg checking. Cc: Hugh Dickins <hugh@veritas.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by:
-
Andrew Morton authored
We need set_page_dirty() to return true if it actually transitioned the page from a clean to dirty state. This wasn't right in a couple of places. Do a kernel-wide audit, fix things up. This leaves open the possibility of returning a negative errno from set_page_dirty() sometime in the future. But we don't do that at present. Signed-off-by:
-
