Now that no code in arch/arm is shared between mach-exynos and the
others, make the split formal.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-15-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The only part of plat-samsung that is shared with arch-exynos
is the CPU identification code.

Having a separate exynos_cpu_id variable makes the two completely
independent and is actually a bit less code in total.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-14-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Before we can separate plat-samsung from the individual platforms,
this one has to get moved to a place where it remains accessible.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-13-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The pm-debug code is one of the few things shared between
s3c24xx/s3c64xx and the newer s5pv210. In order to make s5pv210
independent of plat-samsung, change the common bits of this code to no
longer reference the s3c specific bits.

In particular, all the CPU checks need to be moved out of the common
code into platform specific files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-12-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

On s3c24xx and s3c64xx, this is just a wrapper around
s3c_pm_debug_init_uart(), but this function does not exist on s5pv210,
which always uses an empty stub as CONFIG_SAMSUNG_ATAGS is normally
not set.

In a configuration that supports both s5pv210 and s3c64xx, we would
always call the s3c64xx function, which is probably incorrect when
running on s5pv210.

Remove the function call completely on s5pv210 and skip the wrapper on
s3c as a cleanup.

As a side-effect, the s3c64xx behavior is now always the same, regardless
of whether it is a DT-only configuration or both DT and ATAGS are
supported for booting.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-11-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

This file has not had any callers since linux-4.7, so
stop building it.

Fixes: 5901f4c2 ("ARM: EXYNOS: Remove SROM related register settings from mach-exynos")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-10-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Remove unused 'udc' variable to fix compile warnings:

    drivers/usb/gadget/udc/s3c2410_udc.c: In function 's3c2410_udc_dequeue':
    drivers/usb/gadget/udc/s3c2410_udc.c:1268:22: warning: variable 'udc' set but not used [-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200731074122.6484-1-krzk@kernel.org

There is no real phy driver, so s3c-hsudc just pokes the registers
itself. Improve this a little by making it a platform data callback
like we do for gpios.

There is only one board using this driver, and it's unlikely
that another would be added, so this is a minimal workaround.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-9-krzk@kernel.org
[krzk: Include regs-s3c2443-clock.h in ifdef to fixup build on s3c6400]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The resources are correctly initialized, so just use them
instead of relying on hardcoded data from platform headers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-8-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

s3c24xx has a custom implementation of the inb/outb family of I/O
accessors, implementing both general register access and ISA I/O port
through a multiplexer.

As far as I can tell, the first case has never been needed, and certainly
is not used now, as drivers only use inb/outb to actually driver ISA or
PCI port I/O.

Similarly, the special ISA support is limited to a single machine, the
Simtec Electronics BAST (EB2410ITX) with its PC/104 expansion connector,
all other machines could simply use the generic implementation from
asm/io.h that expects a single memory-mapped address range for byte,
word and dword access. As no other machines besides BAST actually selects
CONFIG_ISA, this is likely not even necessary.

As a cleanup, remove support for the non-ISA access from the helpers,
and make the ISA access use the virtual address window that we use
elsewhere for PCI I/O ports. In configurations without the BAST machine,
this now falls back on the generic implementation from asm/io.h, but
the mach/io.h header is still relied on to include a number of other
header files implicitly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-7-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Passing pointers directly as platform data is fragile and undocumented.
Better to create a platform data structure which explicitly documents
what is passed to the driver.
Suggested-by: Tomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-6-krzk@kernel.org

The clk driver uses both a function call into an exported
platform file and a direct register access to a hardcoded
virtual address for accessing the MISCCR register, both
become are a problem for a multiplatform kernel because
of the header file dependency.

Make this an indirect function call through platform data
instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20200806182059.2431-5-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

There are two functions in this file that are never called from
anywhere else, so they should be static to allow the compiler
to optimize it better and not pollute the global namespace.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200806182059.2431-4-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The gpio controller names differ between s3c24xx and s3c64xx,
and it seems that these all got the wrong names, using GPx instead
of GPIOx.

Fixes: d2951dfa ("mmc: s3cmci: Use the slot GPIO descriptor")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200806182059.2431-3-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Commit f6361c6b ("ARM: S3C24XX: remove separate restart code")
removed usage of the watchdog reset platform code in favor of the
Samsung SoC watchdog driver.  However the latter was not selected thus
S3C24xx platforms lost reset abilities.

Cc: <stable@vger.kernel.org>
Fixes: f6361c6b ("ARM: S3C24XX: remove separate restart code")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Similarly to commit f6361c6b ("ARM: S3C24XX: remove separate restart
code"), the platform watchdog reset code can be removed in favor of
a generic watchdog driver which already handles reset.

This allows removal of a bunch of machine code and fixes also W=1
compile warnings:

    arch/arm/plat-samsung/watchdog-reset.c:29:6: warning: no previous prototype for 'samsung_wdt_reset' [-Wmissing-prototypes]
    arch/arm/plat-samsung/watchdog-reset.c:69:13: warning: no previous prototype for 'samsung_wdt_reset_of_init' [-Wmissing-prototypes]
    arch/arm/plat-samsung/watchdog-reset.c:89:13: warning: no previous prototype for 'samsung_wdt_reset_init' [-Wmissing-prototypes]

The generic watchdog-based system reset is not exactly the same as
before.  The previous method had a fallback to soft_restart() which now
is gone.

The commit also removes a FIXME note about calling s3c64xx_clk_init()
inside s3c64xx_init_irq().  No one fixed this since long time and the
note is not meaningful anymore because watchdog part is removed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>

A separate Kconfig option HAVE_S3C2410_WATCHDOG for Samsung SoCs is not
really needed and the s3c24xx watchdog driver can depend on Samsung ARM
architectures instead.

The "HAVE_xxx_WATCHDOG" pattern of dependency is not popular and Samsung
platforms are here exceptions.  All others just depend on
CONFIG_ARCH_xxx.

This makes the code slightly smaller without any change in
functionality.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>

The s3c-camif driver setup platform code does not have any users so it
can be safely removed.

Along with the code W=1 compile warnings go away:

    arch/arm/mach-s3c24xx/setup-camif.c:28:5: warning: no previous prototype for 's3c_camif_gpio_get' [-Wmissing-prototypes]
    arch/arm/mach-s3c24xx/setup-camif.c:56:6: warning: no previous prototype for 's3c_camif_gpio_put' [-Wmissing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Fix W=1 compile warnings (invalid kerneldoc):

    arch/arm/plat-samsung/pm-common.c:68: warning: Function parameter or member 'ptr' not described in 's3c_pm_do_restore_core'
    arch/arm/plat-samsung/pm-common.c:68: warning: Function parameter or member 'count' not described in 's3c_pm_do_restore_core'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The s3cmci driver does not use machine header mach/dma.h.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Not all units use the contents of mach/hardware.h and
mach/dma.h.  Remove these includes when not needed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Document function argument in kerneldoc comment to fix W=1 compile
warning:

    arch/arm/mach-s3c24xx/setup-ts.c:27: warning: Function parameter or member 'dev' not described in 's3c24xx_ts_cfg_gpio'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Include platform_data/touchscreen-s3c2410.h header in the touchscreen
code to bring the prototypes of defined functions and fix W=1 compile
warning:

    arch/arm/mach-s3c24xx/setup-ts.c:24:6: warning: no previous prototype for 's3c24xx_ts_cfg_gpio' [-Wmissing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Include plat/sdhci.h header in the sdhci code to bring the prototypes of
defined functions and fix W=1 compile warnings:

    arch/arm/mach-s3c24xx/setup-sdhci-gpio.c:21:6: warning: no previous prototype for 's3c2416_setup_sdhci0_cfg_gpio' [-Wmissing-prototypes]
    arch/arm/mach-s3c24xx/setup-sdhci-gpio.c:26:6: warning: no previous prototype for 's3c2416_setup_sdhci1_cfg_gpio' [-Wmissing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Include common.h header in the s3c2443.c to bring the prototypes of
defined functions and fix W=1 compile warnings:

    arch/arm/mach-s3c24xx/s3c2443.c:60:12: warning: no previous prototype for 's3c2443_init' [-Wmissing-prototypes]
    arch/arm/mach-s3c24xx/s3c2443.c:77:13: warning: no previous prototype for 's3c2443_init_uarts' [-Wmissing-prototypes]
    arch/arm/mach-s3c24xx/s3c2443.c:88:13: warning: no previous prototype for 's3c2443_map_io' [-Wmissing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Remove the arch/arm/plat-samsung/include/plat/samsung-time.h header and
move the contents to common.h headers in mach-s3c24xx and mach-s3c64xx.
The definition of declared functions is already in common.c in mach
directories, so it is logically to put declaration next to them.

This is also one step further towards removal of plat-samsung directory
and it fixes W=1 build warnings:

    arch/arm/mach-s3c64xx/common.c:174:13: warning: no previous prototype for 'samsung_set_timer_source' [-Wmissing-prototypes]
    arch/arm/mach-s3c64xx/common.c:180:13: warning: no previous prototype for 'samsung_timer_init' [-Wmissing-prototypes]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>

The s3c2410_common_clk_init() and others are defined and used by the
clk-s3c24xx driver and also used in the mach-s3c24xx machine code.  Move
the declaration to a header to fix W=1 build warnings:

    drivers/clk/samsung/clk-s3c2410.c:320:13: warning: no previous prototype for 's3c2410_common_clk_init' [-Wmissing-prototypes]
      320 | void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
    drivers/clk/samsung/clk-s3c2412.c:205:13: warning: no previous prototype for 's3c2412_common_clk_init' [-Wmissing-prototypes]
      205 | void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
    drivers/clk/samsung/clk-s3c2443.c:341:13: warning: no previous prototype for 's3c2443_common_clk_init' [-Wmissing-prototypes]
      341 | void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>

The s3c64xx_clk_init() is defined and used by the clk-s3c64xx driver and
also used in the mach-s3c64xx machine code.  Move the declaration to a
header to fix W=1 build warning:

    drivers/clk/samsung/clk-s3c64xx.c:391:13: warning: no previous prototype for 's3c64xx_clk_init' [-Wmissing-prototypes]
      391 | void __init s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>

Fix Complie -> Compile
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>

Remove kerneldoc annotation to fix warning:

    arch/arm/mach-s3c24xx/mach-h1940.c:185: warning:
        cannot understand function prototype: 'struct s3c2410fb_display h1940_lcd __initdata = '
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>

Include the spi-s3c64xx.h header to fix W=1 build warning:

    arch/arm/mach-s3c64xx/setup-spi.c:11:5: warning:
        no previous prototype for 's3c64xx_spi0_cfg_gpio' [-Wmissing-prototypes]
       11 | int s3c64xx_spi0_cfg_gpio(void)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>

The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.

This avoids scanning the identifier tables during probes.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The Samsung SoC maintainer entry covers drivers and headers matching
"exynos" name but except that there are also files for S3C24xx, S3C64xx
and S5Pv210 SoCs.  These sometimes do not have a separate entry for a
driver maintainer thus might miss review.  Add them to the Samsung SoC
maintainer entry to cover all SoCs with name matches.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>

Vincent Sanders' email bounces with code 550 (user does not exist) so
remove the entry from Simtec S3C24xx boards.

Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The function clk_get() returns ERR_PTR() in case of error and
never returns NULL. So there's no need to test whether xusbxti
is NULL, just remove the redundant part in the return value check.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Pull io_uring fixes from Jens Axboe:
 "A few differerent things in here.

  Seems like syzbot got some more io_uring bits wired up, and we got a
  handful of reports and the associated fixes are in here.

  General fixes too, and a lot of them marked for stable.

  Lastly, a bit of fallout from the async buffered reads, where we now
  more easily trigger short reads. Some applications don't really like
  that, so the io_read() code now handles short reads internally, and
  got a cleanup along the way so that it's now easier to read (and
  documented). We're now passing tests that failed before"

* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
  io_uring: short circuit -EAGAIN for blocking read attempt
  io_uring: sanitize double poll handling
  io_uring: internally retry short reads
  io_uring: retain iov_iter state over io_read/io_write calls
  task_work: only grab task signal lock when needed
  io_uring: enable lookup of links holding inflight files
  io_uring: fail poll arm on queue proc failure
  io_uring: hold 'ctx' reference around task_work queue + execute
  fs: RWF_NOWAIT should imply IOCB_NOIO
  io_uring: defer file table grabbing request cleanup for locked requests
  io_uring: add missing REQ_F_COMP_LOCKED for nested requests
  io_uring: fix recursive completion locking on oveflow flush
  io_uring: use TWA_SIGNAL for task_work uncondtionally
  io_uring: account locked memory before potential error case
  io_uring: set ctx sq/cq entry count earlier
  io_uring: Fix NULL pointer dereference in loop_rw_iter()
  io_uring: add comments on how the async buffered read retry works
  io_uring: io_async_buf_func() need not test page bit

Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.

Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.

Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:
 "A few fixes on the block side of things:

   - Discard granularity fix (Coly)

   - rnbd cleanups (Guoqing)

   - md error handling fix (Dan)

   - md sysfs fix (Junxiao)

   - Fix flush request accounting, which caused an IO slowdown for some
     configurations (Ming)

   - Properly propagate loop flag for partition scanning (Lennart)"

* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
  block: fix double account of flush request's driver tag
  loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
  rnbd: no need to set bi_end_io in rnbd_bio_map_kern
  rnbd: remove rnbd_dev_submit_io
  md-cluster: Fix potential error pointer dereference in resize_bitmaps()
  block: check queue's limits.discard_granularity in __blkdev_issue_discard()
  md: get sysfs entry after redundancy attr group create

Pull RISC-V fix from Palmer Dabbelt:
 "I collected a single fix during the merge window: we managed to break
  the early trap setup on !MMU, this fixes it"

* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Setup exception vector for nommu platform