Pull rdma fixes from Jason Gunthorpe:
 "One regression from 5.8 and a few bugs from earlier kernels:

   - Various spelling corrections in kernel prints

   - Bug fixes in hfi1 and bntx_re

   - Revert a 5.8 patch in hns

   - Batch update for Mellanox and Cumulus maintainers emails"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  MAINTAINERS: Update Mellanox and Cumulus Network addresses to new domain
  Revert "RDMA/hns: Reserve one sge in order to avoid local length error"
  RDMA/hfi1: Correct an interlock issue for TID RDMA WRITE request
  RDMA/bnxt_re: Do not add user qps to flushlist
  RDMA/core: Fix spelling mistake "Could't" -> "Couldn't"
  RDMA/usnic: Fix spelling mistake "transistion" -> "transition"
  RDMA/hns: Fix spelling mistake "epmty" -> "empty"

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes over several drivers, but all are driver-
  specific and nothing looks scary.

  Slightly large changes are seen in ASoC qcom driver for the bugs that
  were revealed by the recent ASoC core change to report the invalid
  register access errors. Also ASoC fsl got a slight intensive change
  for the distortion fix.

  Others are only trivial fixes or device-specific quirks"

* tag 'sound-5.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: hda: avoid reset of sdo_limit
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Book Ion
  ALSA: usb-audio: ignore broken processing/extension unit
  ASoC: intel: Fix memleak in sst_media_open
  ASoC: wm8994: Avoid attempts to read unreadable registers
  ASoC: msm8916-wcd-analog: fix register Interrupt offset
  ASoC: wm8994: Prevent access to invalid VU register bits on WM1811
  ALSA: hda/realtek: Add model alc298-samsung-headphone
  ALSA: usb-audio: Update documentation comment for MS2109 quirk
  ALSA: isa: fix spelling mistakes in the comments
  ALSA: usb-audio: Add capture support for Saffire 6 (USB 1.1)
  ALSA: hda/realtek: Add quirk for Samsung Galaxy Flex Book
  ASoC: q6routing: add dummy register read/write function
  ASoC: q6afe-dai: mark all widgets registers as SND_SOC_NOPM
  ASoC: Make soc_component_read() returning an error code again
  ASoC: amd: Replacing component->name with codec_dai->name.
  ASoC: fsl: Fix unused variable warning
  ASoC: tegra: tegra210_i2s: Fix compile warning with CONFIG_PM=n
  ASoC: tegra: tegra210_dmic: Fix compile warning with CONFIG_PM=n
  ASoC: tegra: tegra210_ahub: Fix compile warning with CONFIG_PM=n
  ...

Pull drm fixes from Dave Airlie:
 "Regular fixes pull for rc2. Usual rc2 doesn't seem too busy, mainly
  i915 and amdgpu. I'd expect the usual uptick for rc3.

  amdgpu:
   - Fix allocation size
   - SR-IOV fixes
   - Vega20 SMU feature state caching fix
   - Fix custom pptable handling
   - Arcturus golden settings update
   - Several display fixes
   - Fixes for Navy Flounder
   - Misc display fixes
   - RAS fix

  amdkfd:
   - SDMA fix for renoir

  i915:
   - Fix device parameter usage for selftest mock i915 device
   - Fix LPSP capability debugfs NULL dereference
   - Fix buddy register pagemask table
   - Fix intel_atomic_check() non-negative return value
   - Fix selftests passing a random 0 into ilog2()
   - Fix TGL power well enable/disable ordering
   - Switch to PMU module refcounting
   - GVT fixes

  virtio:
   - Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl()
   - Fix memory leak in virtio_gpu_cleanup_object()"

* tag 'drm-fixes-2020-08-21' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  Revert "drm/amdgpu: disable gfxoff for navy_flounder"
  drm/i915/tgl: Make sure TC-cold is blocked before enabling TC AUX power wells
  drm/i915/selftests: Avoid passing a random 0 into ilog2
  drm/i915: Fix wrong return value in intel_atomic_check()
  drm/i915: Update bw_buddy pagemask table
  drm/i915/display: Check for an LPSP encoder before dereferencing
  drm/i915: Copy default modparams to mock i915_device
  drm/i915: Provide the perf pmu.module
  drm/amd/display: fix pow() crashing when given base 0
  drm/amd/display: Reset scrambling on Test Pattern
  drm/amd/display: fix dcn3 wide timing dsc validation
  drm/amd/display: Fix DFPstate hang due to view port changed
  drm/amd/display: Assign correct left shift
  drm/amd/display: Call DMUB for eDP power control
  drm/amdkfd: fix the wrong sdma instance query for renoir
  drm/amdgpu: parse ta firmware for navy_flounder
  drm/amdgpu: fix NULL pointer access issue when unloading driver
  drm/amdgpu: fix uninit-value in arcturus_log_thermal_throttling_event()
  drm/amdgpu: disable gfxoff for navy_flounder
  drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internal
  ...

Mellanox and Cumulus Network were acquired by Nvidia, so change the
maintainers emails to new domain name.

Link: https://lore.kernel.org/r/20200810091100.243932-1-leon@kernel.orgSigned-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Merge tag 'drm-intel-fixes-2020-08-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.9-rc2:
- GVT fixes
- Fix device parameter usage for selftest mock i915 device
- Fix LPSP capability debugfs NULL dereference
- Fix buddy register pagemask table
- Fix intel_atomic_check() non-negative return value
- Fix selftests passing a random 0 into ilog2()
- Fix TGL power well enable/disable ordering
- Switch to PMU module refcounting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6yp7jp3.fsf@intel.com

Merge tag 'amd-drm-fixes-5.9-2020-08-20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.9-2020-08-20:

amdgpu:
- Fixes for Navy Flounder
- Misc display fixes
- RAS fix

amdkfd:
- SDMA fix for renoir
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200820041938.3928-1-alexander.deucher@amd.com

Pull PCI fix from Bjorn Helgaas:
 "Fix P2PDMA build issue (Christoph Hellwig)"

* tag 'pci-v5.9-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/P2PDMA: Fix build without DMA ops

Pull dma-mapping fixes from Christoph Hellwig:
 "Fix more fallout from the dma-pool changes (Nicolas Saenz Julienne,
  me)"

* tag 'dma-mapping-5.9-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-pool: Only allocate from CMA when in same memory zone
  dma-pool: fix coherent pool allocations for IOMMU mappings

The afs_put_operation() function needs to put the reference to the key
that's authenticating the operation.

Fixes: e49c7b2f ("afs: Build an abstraction around an "operation" concept")
Reported-by: Dave Botsch <botsch@cnf.cornell.edu>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch caused some issues on SEND operation, and it should be reverted
to make the drivers work correctly. There will be a better solution that
has been tested carefully to solve the original problem.

This reverts commit 711195e5.

Fixes: 711195e5 ("RDMA/hns: Reserve one sge in order to avoid local length error")
Link: https://lore.kernel.org/r/1597829984-20223-1-git-send-email-liweihang@huawei.comSigned-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

The following message occurs when running an AI application with TID RDMA
enabled:

hfi1 0000:7f:00.0: hfi1_0: [QP74] hfi1_tid_timeout 4084
hfi1 0000:7f:00.0: hfi1_0: [QP70] hfi1_tid_timeout 4084

The issue happens when TID RDMA WRITE request is followed by an
IB_WR_RDMA_WRITE_WITH_IMM request, the latter could be completed first on
the responder side. As a result, no ACK packet for the latter could be
sent because the TID RDMA WRITE request is still being processed on the
responder side.

When the TID RDMA WRITE request is eventually completed, the requester
will wait for the IB_WR_RDMA_WRITE_WITH_IMM request to be acknowledged.

If the next request is another TID RDMA WRITE request, no TID RDMA WRITE
DATA packet could be sent because the preceding IB_WR_RDMA_WRITE_WITH_IMM
request is not completed yet.

Consequently the IB_WR_RDMA_WRITE_WITH_IMM will be retried but it will be
ignored on the responder side because the responder thinks it has already
been completed. Eventually the retry will be exhausted and the qp will be
put into error state on the requester side. On the responder side, the TID
resource timer will eventually expire because no TID RDMA WRITE DATA
packets will be received for the second TID RDMA WRITE request.  There is
also risk of a write-after-write memory corruption due to the issue.

Fix by adding a requester side interlock to prevent any potential data
corruption and TID RDMA protocol error.

Fixes: a0b34f75 ("IB/hfi1: Add interlock between a TID RDMA request and other requests")
Link: https://lore.kernel.org/r/20200811174931.191210.84093.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org> # 5.4.x+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Driver shall add only the kernel qps to the flush list for clean up.
During async error events from the HW, driver is adding qps to this list
without checking if the qp is kernel qp or not.

Add a check to avoid user qp addition to the flush list.

Fixes: 942c9b6c ("RDMA/bnxt_re: Avoid Hard lockup during error CQE processing")
Fixes: c50866e2 ("bnxt_re: fix the regression due to changes in alloc_pbl")
Link: https://lore.kernel.org/r/1596689148-4023-1-git-send-email-selvin.xavier@broadcom.comSigned-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

There is a spelling mistake in a pr_warn message. Fix it.

Link: https://lore.kernel.org/r/20200810075824.46770-1-colin.king@canonical.comSigned-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Pull VFIO fixes from Alex Williamson:

 - Fix lockdep issue reported for recursive read-lock (Alex Williamson)

 - Fix missing unwind in type1 replay function (Alex Williamson)

* tag 'vfio-v5.9-rc2' of git://github.com/awilliam/linux-vfio:
  vfio/type1: Add proper error unwind for vfio_iommu_replay()
  vfio-pci: Avoid recursive read-lock usage

This reverts commit 9c9b17a7.
Newly released sdma fw (51.52) provides a fix for the issue.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gcc can transform the loop in a naive implementation of memset/memcpy
etc into a call to the function itself.  This optimization is enabled by
-ftree-loop-distribute-patterns.

This has been the case for a while, but gcc-10.x enables this option at
-O2 rather than -O3 as in previous versions.

Add -ffreestanding, which implicitly disables this optimization with
gcc.  It is unclear whether clang performs such optimizations, but
hopefully it will also not do so in a freestanding environment.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56888Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commits

  c041b5ad ("x86, boot: Create a separate string.h file to provide standard string functions")
  fb4cac57 ("x86, boot: Move memcmp() into string.h and string.c")

the decompressor stub has been using the compiler's builtin memcpy,
memset and memcmp functions, _except_ where it would likely have the
largest impact, in the decompression code itself.

Remove the #undef's of memcpy and memset in misc.c so that the
decompressor code also uses the compiler builtins.

The rationale given in the comment doesn't really apply: just because
some functions use the out-of-line version is no reason to not use the
builtin version in the rest.

Replace the comment with an explanation of why memzero and memmove are
being #define'd.

Drop the suggestion to #undef in boot/string.h as well: the out-of-line
versions are not really optimized versions, they're generic code that's
good enough for the preboot environment. The compiler will likely
generate better code for constant-size memcpy/memset/memcmp if it is
allowed to.

Most decompressors' performance is unchanged, with the exception of LZ4
and 64-bit ZSTD.

	Before	After ARCH
LZ4	  73ms	 10ms   32
LZ4	 120ms	 10ms	64
ZSTD	  90ms	 74ms	64

Measurements on QEMU on 2.2GHz Broadwell Xeon, using defconfig kernels.

Decompressor code size has small differences, with the largest being
that 64-bit ZSTD decreases just over 2k. The largest code size increase
was on 64-bit XZ, of about 400 bytes.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Suggested-by: Nick Terrell <nickrterrell@gmail.com>
Tested-by: Nick Terrell <nickrterrell@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

By default 'sdo_limit' is initialized with a default value of '8'
as per spec. This is overridden in cases where a different value is
required. However this is getting reset when snd_hdac_bus_init_chip()
is called again, which happens during runtime PM cycle.

Avoid this reset by moving 'sdo_limit' setup to 'snd_hdac_bus_init()'
function which would be called only once.

Fixes: 67ae482a ("ALSA: hda: add member to store ratio for stripe control")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1597851130-6765-1-git-send-email-spujar@nvidia.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The dependency between power wells is determined by the ordering of the
power well list: when enabling the power wells for a domain, this
happens walking the power well list forward, while disabling them
happens in the reverse direction. Accordingly a power well on the list
must follow any other power well it depends on.

Since the TC AUX power wells depend on TC-cold being blocked, move the
TC-cold off power well before all AUX power wells.

Fixes: 3c02934b ("drm/i915/tc/tgl: Implement TC cold sequences")
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200720232952.16228-1-imre.deak@intel.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b302a2e6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

igt_mm_config() calls ilog2() on the (pseudo)random 21-bit number
s>>12.  Once in 2 million seeds, this is zero and ilog2 summons
the nasal demons.

There was an attempt to handle this case with a max(), but that's
too late; ms could already be something bizarre.

Given that the low 12 bits of s and ms are always zero, it's a lot
simpler just to divide them by 4096, then everything fits into 32
bits, and we can easily generate a random number 1 <= s <= 0x1fffff.

Fixes: 14d1b9a6 ("drm/i915: buddy allocator")
Signed-off-by: George Spelvin <lkml@sdf.org>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200325192429.GA8865@SDF.ORGSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 21118e8e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

In the case of calling check_digital_port_conflicts() failed, a
negative error code -EINVAL should be returned.

Fixes: bf5da83e ("drm/i915: Move check_digital_port_conflicts() earier")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200802111535.5200-1-tianjia.zhang@linux.alibaba.comSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 66b51b80)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

A recent bspec update removed the LPDDR4 single channel entry from the
buddy register table, but added a new four-channel entry.

Workaround 1409767108 hasn't been updated with any guidance for four
channel configurations, so we leave that alternate table unchanged for
now.

Bspec 49218
Fixes: 3fa01d64 ("drm/i915/tgl: Program BW_BUDDY registers during display init")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200612204734.3674650-1-matthew.d.roper@intel.comReviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ecb40d08)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Avoid a GPF at

<1>[   20.177320] BUG: kernel NULL pointer dereference, address: 000000000000007c
<1>[   20.177322] #PF: supervisor read access in kernel mode
<1>[   20.177323] #PF: error_code(0x0000) - not-present page
<6>[   20.177324] PGD 0 P4D 0
<4>[   20.177327] Oops: 0000 [#1] PREEMPT SMP PTI
<4>[   20.177328] CPU: 1 PID: 944 Comm: debugfs_test Not tainted 5.8.0-rc7-CI-CI_DRM_8814+ #1
<4>[   20.177330] Hardware name: Dell Inc. XPS 13 9360/0823VW, BIOS 2.9.0 07/09/2018
<4>[   20.177372] RIP: 0010:i915_lpsp_capability_show+0x44/0xc0 [i915]
<4>[   20.177374] Code: 0f b6 81 ca 0d 00 00 3c 0b 74 77 76 19 3c 0c 75 44 83 7e 7c 01 7e 2f 48 c7 c6 d7 b9 47 a0 e8 43 df 06 e1 31 c0 c3 3c 09 72 2b <8b> 46 7c 85 c0 75 e6 8b 82 e4 00 00 00 89 c2 83 e2 fb 83 fa 0a 74
<4>[   20.177376] RSP: 0018:ffffc90000cebe38 EFLAGS: 00010246
<4>[   20.177377] RAX: 0000000000000009 RBX: ffff888267fe6a58 RCX: ffff888252d10000
<4>[   20.177378] RDX: ffff88824a9a4000 RSI: 0000000000000000 RDI: ffff888267fe6a30
<4>[   20.177379] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
<4>[   20.177380] R10: 0000000000000001 R11: 0000000000000000 R12: ffffc90000cebf08
<4>[   20.177381] R13: 00000000ffffffff R14: 0000000000000001 R15: ffff888267fe6a30
<4>[   20.177383] FS:  00007f6f9c6b5e40(0000) GS:ffff888276480000(0000) knlGS:0000000000000000
<4>[   20.177384] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[   20.177385] CR2: 000000000000007c CR3: 0000000255f04006 CR4: 00000000003606e0
<4>[   20.177386] Call Trace:
<4>[   20.177390]  seq_read+0xcb/0x420

which is presumably from having no encoder attached at that time.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2175
Fixes: 8806211f ("drm/i915: Add i915_lpsp_capability debugfs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200729130912.30093-1-chris@chris-wilson.co.ukSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a22b1a9b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Since we use the module parameters stored inside the drm_i915_device
itself, we need to ensure the mock i915_device also sets up the right
defaults.

Fixes: 8a25c4be ("drm/i915/params: switch to device specific parameters")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200728150600.4509-1-chris@chris-wilson.co.ukSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 98ef0674)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Rather than manually implement our own module reference counting for perf
pmu events, finally realise that there is a module parameter to struct
pmu for this very purpose.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716094643.31410-1-chris@chris-wilson.co.ukSigned-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 27e897be)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>

gvt-next-fixes-2020-08-05

- Fix guest suspend/resume low performance handling of shadow ppgtt (Colin)
- Fix PV notifier handling for guest suspend/resume (Colin)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200805080207.GY27035@zhen-hp.sh.intel.com

The Galaxy Book Ion uses the same ALC298 codec as other Samsung laptops
which have the no headphone sound bug, like my Samsung Notebook. The
Galaxy Book owner confirmed that this patch fixes the bug.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207423Signed-off-by: Mike Pozulp <pozulp.kernel@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200818165446.499821-1-pozulp.kernel@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v5.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.9

A bunch of fixes that came in during the merge window, mostly for issues
that were uncovered by the changes to report errors on invalid register
access plus one important fix in that code itself.

Merge tag 'amd-drm-fixes-5.9-2020-08-12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.9-2020-08-12:

amdgpu:
- Fix allocation size
- SR-IOV fixes
- Vega20 SMU feature state caching fix
- Fix custom pptable handling
- Arcturus golden settings update
- Several display fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200813033610.4008-1-alexander.deucher@amd.com

drm-misc-fixes for v5.9-rc1:
- Add missing dma_fence_put() in virtio_gpu_execbuffer_ioctl().
- Fix memory leak in virtio_gpu_cleanup_object().
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d50eb2e0-75c8-b724-006f-5e7b391961ff@linux.intel.com

[Why&How]
pow(a,x) is implemented as exp(x*log(a)). log(0) will crash.
So return 0^x = 0, unless x=0, convention seems to be 0^0 = 1.

Cc: stable@vger.kernel.org
Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Programming is missing the sequence where for eDP the scrambling is
reset when testing for eye diagram test pattern.

[How]
Include the required register in the definition
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Wide timing DSC requires odm. Since spreadsheet is missing this dsc
validation we have to modify DML vba code ourselves.
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Place the cursor in the center of screen between two pipes then
adjusting the viewport but cursour doesn't update cause DFPstate hang.

[How]
If viewport changed, update cursor as well.

Cc: stable@vger.kernel.org
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Reading for DP alt registers return incorrect values due to LE_SF
definition missing.

[How]
Define correct LE_SF or DP alt registers.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
If DMUB is used, LVTMA VBIOS call can be used to control eDP instead of
tranditional transmitter control.  Interface is agreed with VBIOS for
eDP to use this new path to program LVTMA registers.

[How]
Create DAL interface to send DMUB command for LVTMA as currently
implemented in VBIOS.
Signed-off-by: Chris Park <Chris.Park@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Renoir only has one sdma instance, it will get failed once query the
sdma1 registers. So use switch-case instead of static register array.
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the same case as sienna_cichlid
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull spi fixes from Mark Brown:
 "A bunch of fixes that came in for SPI during the merge window.

  Some from ST and others for their controller, one from Lukas for a
  race between device addition and controller unregistration and one
  from fix from Geert for the DT bindings which unbreaks validation"

* tag 'spi-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  dt-bindings: lpspi: Add missing boolean type for fsl,spi-only-use-cs1-sel
  spi: stm32: always perform registers configuration prior to transfer
  spi: stm32: fixes suspend/resume management
  spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate
  spi: stm32: fix fifo threshold level in case of short transfer
  spi: stm32h7: fix race condition at end of transfer
  spi: stm32: clear only asserted irq flags on interrupt
  spi: Prevent adding devices below an unregistering controller

When unloading driver by "modprobe -r amdgpu", one NULL pointer
dereference bug occurs in ras debugfs releasing. The cause is the
duplicated debugfs_remove, as drm debugfs_root dir has been cleaned
up already by drm_minor_unregister.

BUG: kernel NULL pointer dereference, address: 00000000000000a0
PGD 0 P4D 0
Oops: 0002 [#1] SMP PTI
CPU: 11 PID: 1526 Comm: modprobe Tainted: G           OE     5.6.0-guchchen #1
Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018
RIP: 0010:down_write+0x15/0x40
Code: eb de e8 7e 17 72 ff cc cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 53 48 89 fb e8 92
d8 ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 0f 65 48 8b 04 25 c0 8b 01 00 48 89 43 08 5b c3
RSP: 0018:ffffb1590386fcd0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 00000000000000a0 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff85b2fcc2 RDI: 00000000000000a0
RBP: ffffb1590386fd30 R08: ffffffff85b2fcc2 R09: 000000000002b3c0
R10: ffff97a330618c40 R11: 00000000000005f6 R12: ffff97a3481beb40
R13: 00000000000000a0 R14: ffff97a3481beb40 R15: 0000000000000000
FS:  00007fb11a717540(0000) GS:ffff97a376cc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000000000a0 CR3: 00000004066d6006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 simple_recursive_removal+0x63/0x370
 ? debugfs_remove+0x60/0x60
 debugfs_remove+0x40/0x60
 amdgpu_ras_fini+0x82/0x230 [amdgpu]
 ? __kernfs_remove.part.17+0x101/0x1f0
 ? kernfs_name_hash+0x12/0x80
 amdgpu_device_fini+0x1c0/0x580 [amdgpu]
 amdgpu_driver_unload_kms+0x3e/0x70 [amdgpu]
 amdgpu_pci_remove+0x36/0x60 [amdgpu]
 pci_device_remove+0x3b/0xb0
 device_release_driver_internal+0xe5/0x1c0
 driver_detach+0x46/0x90
 bus_remove_driver+0x58/0xd0
 pci_unregister_driver+0x29/0x90
 amdgpu_exit+0x11/0x25 [amdgpu]
 __x64_sys_delete_module+0x13d/0x210
 do_syscall_64+0x5f/0x250
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>