- 04 Apr, 2019 40 commits
-
-
Anderson Reis authored
Break the line 258 in order fit the line width on 80 characters. Remove the blank line 279, as the line before is also a blank line. Solve these checkpath.el WARNING and CHECK: - lmp91000.c:258: WARNING: line over 80 characters - lmp91000.c:279: CHECK: Please don't use multiple blank lines Signed-off-by:
Lucas Oshiro <lucasseikioshiro@gmail.com> Signed-off-by:
Anderson Reis <andersonreisrosa@gmail.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Lucas Oshiro authored
Remove unnecessary parentheses on line 116. Signed-off-by:
-
Justin Chen authored
The ADS79XX has GPIO pins that can be used. Add support for the GPIO pins using the GPIO chip framework. Signed-off-by:
Justin Chen <justinpopo6@gmail.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Kangjie Lu authored
devm_iio_trigger_alloc may fail and return NULL. The fix returns ENOMEM when it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Signed-off-by:
-
Sean Nyekjaer authored
Update the module author to the current email address Signed-off-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
-
Sean Nyekjaer authored
Update the module author to the current email address. Signed-off-by:
-
Robert Yang authored
Add device tree support for kxcjk-1013 accelerometer sensors. Signed-off-by:
Robert Yang <decatf@gmail.com> Signed-off-by:
-
Robert Yang authored
Document device tree bindings for Kionix KXCJK-1013 Accelerometer driver. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Robert Yang authored
Kionix manufactured MEMs sensors. There are Kionix acceleromoter sensor drivers which can be used with device tree. Signed-off-by:
-
Neil Armstrong authored
Add the SAR ADC driver for the Amlogic Meson-G12A SoC. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Neil Armstrong authored
Update the documentation to explicitly support the Meson-G12A SoC. Signed-off-by:
-
Sean Nyekjaer authored
As I'll no longer be working with Prevas, add a mailmap entry so any mail directed towards me reaches the appropriate mailbox. Signed-off-by:
-
Andy Shevchenko authored
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Refactor some code in order to fix both the technical implementation and the following warnings: drivers/iio/accel/cros_ec_accel_legacy.c: In function ‘cros_ec_accel_legacy_probe’: drivers/iio/accel/cros_ec_accel_legacy.c:387:36: warning: this statement may fall through [-Wimplicit-fallthrough=] ec_accel_channels[X].scan_index = Y; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ drivers/iio/accel/cros_ec_accel_legacy.c:388:3: note: here case Y: ^~~~ drivers/iio/accel/cros_ec_accel_legacy.c:389:36: warning: this statement may fall through [-Wimplicit-fallthrough=] ec_accel_channels[Y].scan_index = X; ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~ drivers/iio/accel/cros_ec_accel_legacy.c:390:3: note: here case Z: ^~~~ Notice that neither the for loop nor the switch statement is needed. Also, "state->sign[Y] = 1" should be unconditional. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
-
Colin Ian King authored
The check that variable val is less than zero is redundant since val is an unsigned int and hence can never be less than zero. Remove it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Lorenzo Bianconi authored
Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
Add support to STM ASM330LHH 6-axis (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/asm330lhh.pdfTested-by:
Mario Tesi <mario.tesi@st.com> Signed-off-by:
-
H. Nikolaus Schaller authored
- use temporary variable in get_mount_matrix() - remove , after { } Signed-off-by:H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by:
-
H. Nikolaus Schaller authored
- use temporary variable in get_mount_matrix() - remove , after { } Signed-off-by: -
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
H. Nikolaus Schaller authored
This patch allows to read a mount-matrix device tree property and report to user-space or in-kernel iio clients. Signed-off-by:
-
Andy Shevchenko authored
Currently mount matrix is allowed in Device Tree, though there is no technical issue to extend it to support ACPI. Convert the function to use device_property_read_string_array() and thus allow to read mount matrix from ACPI if available. Example of use in _DSD method: Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () { "mount-matrix", Package() { "1", "0", "0", "0", "0.866", "0.5", "0", "-0.5", "0.866", } }, } }) At the same time drop the "of" prefix from its name and convert current users. No functional change intended. Signed-off-by: -
Bárbara Fernandes authored
Solves checkpath.pl's message: CHECK: Comparison to NULL could be written "!indio_dev" Signed-off-by:
Bárbara Fernandes <barbara.fernandes@usp.br> Signed-off-by:
-
Bárbara Fernandes authored
Put macro argument between parenthesis in order to avoid precedence issues. Solves the following checkpath.pl's messages: CHECK: Macro argument 'mode' may be better as '(mode)' to avoid precedence issues CHECK: Macro argument 'channel' may be better as '(channel)' to avoid precedence issues CHECK: Macro argument reuse 'sequence' - possible side-effects? CHECK: Macro argument 'sequence' may be better as '(sequence)' to avoid precedence issues CHECK: Macro argument 'val' may be better as '(val)' to avoid precedence issues CHECK: Macro argument 'dec' may be better as '(dec)' to avoid precedence issues CHECK: Macro argument 'bits' may be better as '(bits)' to avoid precedence issues Signed-off-by:
-
Bárbara Fernandes authored
Replace use of the operation '<<' by the BIT macro. Solves checkpath.pl's message: CHECK: Prefer using the BIT macro Signed-off-by:
-
Bárbara Fernandes authored
Get broken line aligned with parenthesis on upper line. Solves checkpatch.pl's message: CHECK: Alignment should match open parenthesis Signed-off-by:
-
Fabrice Gasnier authored
Add suspend/resume PM sleep ops. When going to low power, disable active counter. Only active counter should be resumed: don't touch disabled counter, as it may be used by other LPTimer MFD child driver. Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Fabrice Gasnier authored
Add documentation for optional pinctrl sleep state that can be used by STM32 LPTimer encoder/counter. Signed-off-by:
-
Tomasz Duszynski authored
4.22 have never existed and this change was actually added to 5.0 hence fix the numbering. Signed-off-by:
Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by:
-
Stefan Popa authored
Document support for ADIS16480 Inertial Measurement Unit. Signed-off-by:
Stefan Popa <stefan.popa@analog.com> Reviewed-by:
-
Stefan Popa authored
The ADIS16495 and ADIS16497 are inertial systems that include a triaxis gyroscope and a triaxis accelerometer. The serial peripheral interface (SPI) provide a simple interface for data collection and configuration control. The devices are similar to ADIS16475, ADIS16480, ADIS16485 and ADIS16488, the main differences are highlighted below: * The temperature data scale is 0.00565 C/LSB for ADIS16475 and ADIS1648x devices, while for ADIS1649x 0.0125 C/LSB. * ADIS1649x devices support different gyroscope measurement ranges which are dependent on the dash number (-1, -2, -3), see Table 24 in the ADIS16495 datasheet. However, the ADIS16497 gyroscopes have the same scale as ADIS16495. * ADIS16495 devices support the acceleration maximum range of 8g, while ADIS16497 devices go up to 40g. * The internal clock for ADIS1649x devices is 4.25 kSPS. The sampling frequency is calculated by applying a decimation rate which can take a maximum value of 4250. * ADIS1649x devices support different default filter frequencies. Datasheets: Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adis16495.pdf Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adis16497.pdfSigned-off-by:
-
Stefan Popa authored
When setting the filter frequency, the driver looks into the adis16480_def_filter_freqs table for the best match. Pass this table to the chip_info struct since future devices will need to use a different table. Signed-off-by:
-
Stefan Popa authored
The adis1648x devices have an internal clock of 2.46 kSPS. The sampling frequency is calculated by applying a decimation rate which can take the maximum value of 2047. Although all adis1648x devices are similar in this regard, devices that will use this feature will be added in the future. Signed-off-by:
-
Stefan Popa authored
All supported devices provide internal temperature measurement from -40 C to +85 C, with +25 C representing value 0x00. This patch treats the temperature scale in a generic way, similar to the accelerometer and gyroscope scales. So far, there are no temperature max scale differences between the supported devices. However, devices that will make use of this feature will be added in the future. Signed-off-by:
-
Stefan Popa authored
The driver does not have a struct of_device_id table, but supported devices are registered via Device Trees. This patch adds OF device ID table. Signed-off-by:
-
Stefan Popa authored
The FNCTIO_CTRL register provides configuration control for each I/O pin (DIO1, DIO2, DIO3 and DIO4). This patch adds the option to configure each DIOx pin as data ready indicator with positive or negative polarity by reading the 'interrupts' and 'interrupt-names' properties from the devicetree. The 'interrupt-names' property is optional, if it is not specified, then the DIO1 pin is used as default data ready signal. Although the factory default assigns DIO2 as data ready signal, in the versions previous this patch, DIO1 pin was used. We should leave this configuration as is, since some devices might be expecting the interrupt on the wrong physical pin. Signed-off-by:
-
