- 25 Jul, 2008 40 commits
-
-
Sam Ravnborg authored
Previously when running "make oldconfig" we saw all the propmt lines from kconfig and noone actully read this. With this patch the user will only see output if there is new symbols. This will be seen as "make oldconfig" runs which does not generate any output. A typical run now looks like this: $ make oldconfig scripts/kconfig/conf -o arch/x86/Kconfig $ If a new symbol is found then we restart the config process like this: $ make oldconfig scripts/kconfig/conf -o arch/x86/Kconfig * * Restart config... * * * General setup * Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [Y/n/?] y Local version - append to kernel release (LOCALVERSION) [] ... The bahaviour is similar to what we know when running the implicit oldconfig target "make silentoldconfig". "make silentoldconfig" are run as part of the kernel build process if the configuration has changed. Signed-off-by:Sam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org>
-
Sam Ravnborg authored
Drop the chatty mode when we generate the all*config, randconfig configurations. Ths speeds up the process considerably and noone looked at the output anyway. This patch uses the conf_set_all_new_symbols() function just added to kconfig. Signed-off-by: -
Roman Zippel authored
Add conf_set_all_new_symbols() which set all symbols (which don't have a value yet) to a specifed value. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Tim Bird authored
Diffconfig is a simple utility for comparing two kernel configuration files. See usage in the script for more info. Signed-off-by:
Tim Bird <tim.bird@am.sony.com> Signed-off-by:
-
Alexey Dobriyan authored
Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
Documentation/sparse.txt tells to use: make C=2 CHECKFLAGS="-D__CHECK_ENDIAN__" However, this still doesn't enable endian checks. The correct syntax is: make C=2 CF="-D__CHECK_ENDIAN__" This documentation bug was introduced by the following commit: commit 1c7bafe7 Author: Robert P. J. Day <rpjday@mindspring.com> Date: Wed Sep 13 07:57:50 2006 -0400 kbuild: clarify "make C=" build option Clarify the use of "make C=" in the top-level Makefile, and fix a typo in the Documentation file. Signed-off-by:Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Randy Dunlap authored
Handle __init in functions with kernel-doc notation by stripping the __init away from the output doc. This is already being done for "__devinit". This patch fixes these kernel-doc error/aborts: Error(linux-next-20080619//drivers/usb/gadget/config.c:132): cannot understand prototype: 'struct usb_descriptor_header **__init usb_copy_descriptors(struct usb_descriptor_header **src) ' Error(linux-next-20080619//drivers/usb/gadget/config.c:182): cannot understand prototype: 'struct usb_endpoint_descriptor *__init usb_find_endpoint( struct usb_descriptor_header **src, struct usb_descriptor_header **copy, struct usb_endpoint_descriptor *match ) ' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Jan Beulich authored
Due to the addition of __attribute__((__cold__)) to a few symbols without adjusting the linker scripts, those symbols currently may end up outside the [_stext,_etext) range, as they get placed in .text.unlikely by (at least) gcc 4.3.0. This may confuse code not only outside of the kernel, symbol_put_addr()'s BUG() could also trigger. Hence we need to add .text.unlikely (and for future uses of __attribute__((__hot__)) also .text.hot) to the TEXT_TEXT() macro. Issue observed by Lukas Lipavsky. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Tested-by:
Lukas Lipavsky <llipavsky@suse.cz> Cc: <stable@kernel.org> Signed-off-by:
-
S.Çağlar Onur authored
Following patch corrects URL of "The GNU Accounting Utilities" in init/Kconfig. Noticed by: Bart Van Assche" <bart.vanassche@gmail.com> Signed-off-by:
S.Çağlar Onur <caglar@pardus.org.tr> Signed-off-by:
-
Sam Ravnborg authored
This patch conclude the support for arch/$ARCH/include Note: The individual architectures will most likely require a few minor patches to support locating header files in arch/$ARCH/include Testing shows that it worked out-of-the-box for sparc. x86 required a few trivial changes in the arch specific Makefile and a few include paths had to be adjusted. Signed-off-by: -
Sam Ravnborg authored
Adjust the asm symlink support so we do not create the symlink unless really needed. We check the precense of include/asm-$ARCH by checking for the system.h file. We may end up with a stale directory so it is not enough to check if the directory is present. Signed-off-by: -
Sam Ravnborg authored
Signed-off-by: -
Sam Ravnborg authored
Factor out the headers_*_all support to a seperate shell script and add support for arch specific header files can be located in either arch/$ARCH/include/asm or include/asm-$ARCH/ In "make help" always display the headers_* targets. Signed-off-by: -
Sam Ravnborg authored
We see some header files that are selected dependent on the actual architecture so force a reinstallation of all header files when the arch changes. This slows down "make headers_check_all" but then we better reflect reality. Signed-off-by: -
Alexey Dobriyan authored
Those are left presumably from aborted ccache(1) compilations: arch/x86/kernel/.tmp_io_apic_64.o.T5veul arch/x86/kvm/.tmp_x86.o.SZWn69 arch/x86/mm/.tmp_pgtable.o.sL1LTf drivers/ieee1394/.tmp_ieee1394_transactions.o.bUj6o1 drivers/infiniband/hw/mlx4/.tmp_main.o.vy0ep6 BTW, with git there is nice way to check for such nuisainces: make mrproper git-ls-files -o should give empty output. More precise wildcard spec from: Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
Sam Ravnborg authored
Move the core functionality of headers_install and headers_check to two small perl scripts. The makefile is adapted to use the perl scrip and changed to operate on all files in a directory. So if one file is changed then all files in the directory is processed. perl were chosen for the helper scripts because this is pure text processing which perl is good at and especially the headers_check.pl script are expected to see changes / new checks implmented. The speed is ~300% faster on this box. And the output generated to the screen is now down to two lines per directory (one for install, one for check) so it is easier to scroll back after a kernel build. The perl scripts has been brought to sanity by patient feedback from: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: -
Sam Ravnborg authored
Move it to the top-level file to decide if we install/check the generic headers or the arch specific headers. This revealed a long standing bug where "make headers_check_all" relied on the files in asm/ for the current architecture. So make headers_check_all is now broken by this commit. In addition: o add a simpler way to detect if an arch support exporting header files. o add 'set -e;' so we error out early if make headers_check_all fails. o add sparc64 and cris to arch we do not process in make headers_*_all because: sparc64 - use sparc to export headers cris - is know seriously broken Includes suggestions from: David Woodhouse <dwmw2@infradead.org>. Signed-off-by: -
Sam Ravnborg authored
Fix the a.out.h case by setting SRCARCH and error out early in case of an error. The a.out.h case failed with the *_all targets. Signed-off-by: -
Sam Ravnborg authored
No functional changes just improved readability Signed-off-by: -
Sam Ravnborg authored
ALTARCH is no longer used by any arch(*) so drop support for this from Makefile.headerinst Dropping ALTARCH support simplifies Makefile.headerinst (*) sparc64 uses it but work is ongoing to drop it and no furter usage is planned. Signed-off-by: -
Sam Ravnborg authored
unifdef utility is fast enough to warrant that we always run the scripts through unifdef. This patch runs all headers listed with header-y and unifdef-y through unifdef. Next step is to drop unifdef-y in all Kbuild files and that can now be done in smaller steps. Signed-off-by: -
Sam Ravnborg authored
o Use lower case for local variables o Add a helper target for common targets o Use $(hdr-inst)= ... to make Make invocations simpler o Add -rR to make invocations In total this adds more lines than it removes but the benefit is better readability Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc: Wireup new syscalls Move update_mmu_cache() declaration from tlbflush.h to pgtable.h powerpc/pseries: Remove kmalloc call in handling writes to lparcfg powerpc/pseries: Update arch vector to indicate support for CMO ibmvfc: Add support for collaborative memory overcommit ibmvscsi: driver enablement for CMO ibmveth: enable driver for CMO ibmveth: Automatically enable larger rx buffer pools for larger mtu powerpc/pseries: Verify CMO memory entitlement updates with virtual I/O powerpc/pseries: vio bus support for CMO powerpc/pseries: iommu enablement for CMO powerpc/pseries: Add CMO paging statistics powerpc/pseries: Add collaborative memory manager powerpc/pseries: Utilities to set firmware page state powerpc/pseries: Enable CMO feature during platform setup powerpc/pseries: Split retrieval of processor entitlement data into a helper routine powerpc/pseries: Add memory entitlement capabilities to /proc/ppc64/lparcfg powerpc/pseries: Split processor entitlement retrieval and gathering to helper routines powerpc/pseries: Remove extraneous error reporting for hcall failures in lparcfg powerpc: Fix compile error with binutils 2.15 ... Fixed up conflict in arch/powerpc/platforms/52xx/Kconfig manually.
-
git://git.infradead.org/~dedekind/ubi-2.6Linus Torvalds authored
* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6: (22 commits) UBI: always start the background thread UBI: fix gcc warning UBI: remove pre-sqnum images support UBI: fix kernel-doc errors and warnings UBI: fix checkpatch.pl errors and warnings UBI: bugfix - do not torture PEB needlessly UBI: rework scrubbing messages UBI: implement multiple volumes rename UBI: fix and re-work debugging stuff UBI: amend commentaries UBI: fix error message UBI: improve mkvol request validation UBI: add ubi_sync() interface UBI: fix 64-bit calculations UBI: fix LEB locking UBI: fix memory leak on error path UBI: do not forget to free internal volumes UBI: fix memory leak UBI: avoid unnecessary division operations UBI: fix buffer padding ...
-
Linus Torvalds authored
The new type checking of the flags arguments to irqsave and friends (commit 3f307891) pointed out this thing with a big nice warning. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jiang authored
Convert PCI err device from platform to open firmware of_dev to comply with powerpc schemes. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Dave Jiang <djiang@mvista.com> Signed-off-by:
Doug Thompson <dougthompson@xmission.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Dave Jiang authored
Fixup of missing bit 0 on 64360 PCIx_ERR_MASK and errata FEr-#11 and FEr-#16 for the 64460. Bit 0 must remain 0. Signed-off-by:
-
Dave Jiang authored
Update get_property() call to use of_get_property() in order to fix compile Signed-off-by:
-
Doug Thompson authored
This module harvests more than just memory errors, it also harvests various bus and dma errors that the Chipset detects. Previously, it would report all such errors, which would cause output to be TOO loud. This patches therefore adds a parameter which is used to turn off NON-MEMORY error reports by default. Or the reporting can be enabled via the parameter Also did code style cleanup: less than 80 characters per line rule Signed-off-by:
-
Arthur Jones authored
The channel DIMM label does not seem to be used much in the edac code. However, where it is used (in the core code), it is assumed to not have a newline embedded. This leaves the sysfs file newline free which looks funny when cat'ing it. Here we just add the trailing newline to the sysfs chX_dimm_label output... [Doug Thompson note: the DIMM label is one of the primary uses of EDAC. User space daemon scripts, edac-utils@sourceforge, populate the DIMM label fields, via /sys/devices/system/edac attributes, with the silk screen labels of the motherboard in use. dmidecode access BIOS tables, but BIOS tables are well known to be incorrect and useless in these respects. edac-utils will strip off any newlines before its use of the output, when displaying DIMM slot silk screen labels. Signed-off-by:
Arthur Jones <ajones@riverbed.com> Signed-off-by:
-
Arthur Jones authored
Static kobjects and ksets are not supported in Linux kernel. Convert the mc_kset from static to dynamic. This patch depends on my previous patch to remove the module parameter attributes from mc... Signed-off-by:
-
Arthur Jones authored
/sys/devices/system/edac/mc has a few files which are duplicated in /sys/module/edac_core/parameters. Now that all the functionality is duplicated between these two locations, we remove the former kobject attributes and update the documentation. Signed-off-by:
-
Arthur Jones authored
When updating the edac_mc_poll_msec module parameter from the sysfs /sys/module/edac_core/parameters/edac_mc_poll_msec file, we don't update the workq timers. So that, if we move from a big poll time to a small one, the small one won't take effect until the big one has timed out. Here we provide a new module parameter set method to call out to the update routine. This brings the /sys/module/edac_core/parameters functionality up to that provided by the /sys/drivers/system/edac/mc sysfs module parameter files so that we can remove them or at least link to the /sys/module files... Signed-off-by:
-
Arthur Jones authored
Static kobjects are not supported in linux kernel. Convert the edac_pci_top_main_kobj from static to dynamic. This avoids the double free of the edac_pci_top_main_kobj.name that we see on module reload of the e752x edac driver (and probably others as well). In addition Greg KH <greg@kroah.com> has pointed out that this code may be cleaned up significantly. I will look at that as a follow-on patch, for now, I just want the minimum fix to get this double-free oops bug squashed... Many thanks to Greg KH for his patience in showing me what the Documentation/kobject.txt already said (oops)... Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Arthur Jones authored
Some code cleanliness issues found by Andrew Morton (thanks!) which should not affect functionality, but which should help make the code more maintainable. In particular, we now: * convert all #define's w/ a parameter to static inlines * use 1UL rather than 1ULL when calculating an unsigned long * use pci_disable_device The resulting code is tested and seems to work fine... Signed-off-by:
-
Arthur Jones authored
Explicitly unmask ECC errors we are interested in reporting. Signed-off-by:
-
Arthur Jones authored
It is possible that the BIOS did not enable ECC at boot time. We check for that case and fail to load if it is true. Signed-off-by:
-
Arthur Jones authored
The error mask we use to trigger ECC notifications is missing many bits of interest. We add these bits here so that all possible ECC errors can be reported. Signed-off-by:
-
Arthur Jones authored
Preliminary support for the Intel 5100 MCH. CE and UE errors are reported along with the current DIMM label information and other memory parameters. Reasons why this is preliminary: 1) This chip has 2 independent memory controllers which, for best perforance, use interleaved accesses to the DDR2 memory. This architecture does not map very well to the current edac data structures which depend on symmetric channel access to the interleaved data. Without core changes, the best I could do for now is to map both memory controllers to different csrows (first all ranks of controller 0, then all ranks of controller 1). Someone much more familiar with the edac core than I will probably need to come up with a more general data structure to handle the interleaving and de-interleaving of the two memory controllers. 2) I have not yet tackled the de-interleaving of the rank/controller address space into the physical address space of the CPU. There is nothing fundamentally missing, it is just ending up to be a lot of code, and I'd rather keep it separate for now, esp since it doesn't work yet... 3) The code depends on a particular i5100 chip select to DIMM mainboard chip select mapping. This mapping seems obvious to me in order to support dual and single ranked memory, but it is not unique and DIMM labels could be wrong on other mainboards. There is no way to query this mapping that I know of. 4) The code requires that the i5100 is in 32GB mode. Only 4 ranks per controller, 2 ranks per DIMM are supported. I do not have hardware (nor do I expect to have hardware anytime soon) for the 48GB (6 ranks per controller) mode. 5) The serial presence detect code should be broken out into a "real" i2c driver so that decode-dimms.pl can work. Signed-off-by:
-
Miklos Szeredi authored
If fuse filesystem doesn't define it's own lock operations, then allow the lock manager to work with fuse. Adding lockd support for remote locking is also possible, but more rarely used, so leave it till later. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Matthew Wilcox <matthew@wil.cx> Cc: David Teigland <teigland@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
