Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As rt_iif represents input device even for packets
coming from loopback with output route, it is not an unique
key specific to input routes. Now rt_route_iif has such role,
it was fl.iif in 2.6.38, so better to change the checks at
some places to save CPU cycles and to restore 2.6.38 semantics.

compare_keys:
	- input routes: only rt_route_iif matters, rt_iif is same
	- output routes: only rt_oif matters, rt_iif is not
		used for matching in __ip_route_output_key
	- now we are back to 2.6.38 state

ip_route_input_common:
	- matching rt_route_iif implies input route
	- compared to 2.6.38 we eliminated one rth->fl.oif check
	because it was not needed even for 2.6.38

compare_hash_inputs:
	Only the change here is not an optimization, it has
	effect only for output routes. I assume I'm restoring
	the original intention to ignore oif, it was using fl.iif
	- now we are back to 2.6.38 state
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Free the locally allocated table and newinfo as done in adjacent error
handling code.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Call cipso_v4_doi_putdef in the case of the failure of the allocation of
entry.  Reverse the order of the error handling code at the end of the
function and insert more labels in order to reduce the number of
unnecessary calls to kfree.
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch tidyup below warning

${LINUX}/drivers/net/irda/sh_sir.c:514:6: warning:
 'val' may be used uninitialized in this function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixup below build error on sh_sir

sh_sir.c: In function 'sh_sir_write':
sh_sir.c:127:2: error: implicit declaration of function 'iowrite16'
sh_sir.c: In function 'sh_sir_read':
sh_sir.c:132:2: error: implicit declaration of function 'ioread16'
sh_sir.c: At top level:
sh_sir.c:561:20: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sh_sir_irq'
sh_sir.c: In function 'sh_sir_probe':
sh_sir.c:727:2: error: implicit declaration of function 'ioremap_nocache'
sh_sir.c:727:16: warning: assignment makes pointer from integer without a cast
sh_sir.c:762:2: error: implicit declaration of function 'request_irq'
sh_sir.c:762:23: error: 'sh_sir_irq' undeclared (first use in this function)
sh_sir.c:762:23: note: each undeclared identifier is reported only once for each function it appears in
sh_sir.c:762:35: error: 'IRQF_DISABLED' undeclared (first use in this function)
sh_sir.c:776:2: error: implicit declaration of function 'iounmap'
sh_sir.c: At top level:
sh_sir.c:436:13: warning: 'sh_sir_clear_all_err' defined but not used
sh_sir.c:474:12: warning: 'sh_sir_is_which_phase' defined but not used
sh_sir.c:490:13: warning: 'sh_sir_tx' defined but not used
sh_sir.c:540:13: warning: 'sh_sir_rx' defined but not used
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixup below build error on sh_irda

sh_irda.c: In function 'sh_irda_write':
sh_irda.c:174: error: implicit declaration of function 'iowrite16'
sh_irda.c: In function 'sh_irda_read':
sh_irda.c:184: error: implicit declaration of function 'ioread16'
sh_irda.c: At top level:
sh_irda.c:492: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'sh_irda_irq'
sh_irda.c: In function 'sh_irda_probe':
sh_irda.c:776: error: implicit declaration of function 'ioremap_nocache'
sh_irda.c:776: warning: assignment makes pointer from integer without a cast
sh_irda.c:811: error: implicit declaration of function 'request_irq'
sh_irda.c:811: error: 'sh_irda_irq' undeclared (first use in this function)
sh_irda.c:811: error: (Each undeclared identifier is reported only once
sh_irda.c:811: error: for each function it appears in.)
sh_irda.c:811: error: 'IRQF_DISABLED' undeclared (first use in this function)
sh_irda.c:825: error: implicit declaration of function 'iounmap'
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As this discussion pointed out

http://marc.info/?l=linux-netdev&m=131257225602375

netdevices that are based on serial line disciplines should use netif_rx_ni()
when pushing received socketbuffers into the netdev rx queue.

Following commit 61485160 ("slip: fix NOHZ
local_softirq_pending 08 warning") this patch updates the slcan driver
accordingly.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
CC: Matvejchikov Ilya <matvejchikov@gmail.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch corrects an erroneous update of credential's gid with uid
introduced in commit 257b5358 since 2.6.36.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using a gcc 4.4.3, warnings are emitted for a possibly uninitialized use
of ecn_ok.

This can happen if cookie_check_timestamp() returns due to not having
seen a timestamp.  Defaulting to ecn off seems like a reasonable thing
to do in this case, so initialized ecn_ok to false.
Signed-off-by: Mike Waychison <mikew@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Describes RSS, RPS, RFS, accelerated RFS, and XPS.

This version incorporates comments by Randy Dunlap and Rick Jones.
Besides text cleanup, it adds an explicit "Suggested Configuration"
heading to each section.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-By: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 07bd8df5
(sch_sfq: fix peek() implementation) changed sfq to use generic
peek helper.

This makes HFSC complain about a non-work-conserving child qdisc, if
prio with sfq child is used within hfsc:

hfsc peeks into prio qdisc, which will then peek into sfq.
returned skb is stashed in sch->gso_skb.

Next, hfsc tries to dequeue from prio, but prio will call sfq dequeue
directly, which may return NULL instead of previously peeked-at skb.

Have prio call qdisc_dequeue_peeked, so sfq->dequeue() is
not called in this case.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This ensures the neighbor entries associated with the bridge
dev are flushed, also invalidating the associated cached L2 headers.

This means we br_add_if/br_del_if ports to implement hand-over and
not wind up with bridge packets going out with stale MAC.

This means we can also change MAC of port device and also not wind
up with bridge packets going out with stale MAC.

This builds on Stephen Hemminger's patch, also handling the br_del_if
case and the port MAC change case.

Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Andrei Warkentin <andreiw@motorola.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dp83640 buffers receive time stamps from special PHY status frames,
matching them to received PTP packets in a work queue. Because the timeout
for orphaned time stamps is so long and the buffer is so small, the driver
can drop time stamps under moderate PTP traffic.

This commit fixes the issue by decreasing the timeout to (at least) one
timer tick and increasing the buffer size.
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Cc: <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

After resetting the time, the PPS signals on the FIPER output channels
are incorrectly offset from the clock time, as can be readily verified
by a looping back the FIPER to the external time stamp input.

Despite its name, setting the "Fiper Realignment Disable" bit seems to
fix the problem, at least on the P2020.

Also, following the example code from the Freescale BSP, it is not really
necessary to disable and re-enable the timer in order to reprogram the
FIPER. (The documentation is rather unclear on this point. It seems that
writing to the alarm register also disables the FIPER.)
Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Cc: <stable@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Executing cmd 'rmmod rtl8150' does not return(if your device connects
to host), the root cause is tasklet_disable() causes tasklet_kill()
block, remove it from rtl8150_disconnect().
Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure skb dst has reference when moving to
another context. Currently, I don't see protocols that can
hit it when sending broadcasts/multicasts to loopback using
noref dsts, so it is just a precaution.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

The raw sockets can provide source address for
routing but their privileges are not considered. We
can provide non-local source address, make sure the
FLOWI_FLAG_ANYSRC flag is set if socket has privileges
for this, i.e. based on hdrincl (IP_HDRINCL) and
transparent flags.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCP in some cases uses different global (raw) socket
to send RST and ACK. The transparent flag is not set there.
Currently, it is a problem for rerouting after the previous
change.

	Fix it by simplifying the checks in ip_route_me_harder
and use FLOWI_FLAG_ANYSRC even for sockets. It looks safe
because the initial routing allowed this source address to
be used and now we just have to make sure the packet is rerouted.

	As a side effect this also allows rerouting for normal
raw sockets that use spoofed source addresses which was not possible
even before we eliminated the ip_route_input call.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently userland will barf when including linux/netlink.h unless it
precisely includes sys/socket.h first.  The issue is where the
definition of "sa_family_t" comes from.

We've been back and forth on how to fix this issue in the past, see:

http://thread.gmane.org/gmane.linux.debian.devel.bugs.general/622621
http://thread.gmane.org/gmane.linux.network/143380

Ben Hutchings suggested we take a hint from how we handle the
sockaddr_storage type.  First we define a "__kernel_sa_family_t"
to linux/socket.h that is always defined.

Then if __KERNEL__ is defined, we also define "sa_family_t" as
equal to "__kernel_sa_family_t".

Then in places like linux/netlink.h we use __kernel_sa_family_t
in user visible datastructures.
Reported-by: Michel Machado <michel@digirati.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>

IP_PKTOPTIONS is broken for 32-bit applications running
in COMPAT mode on 64-bit kernels.

This happens because msghdr's msg_flags field is always
set to zero. When running in COMPAT mode this should be
set to MSG_CMSG_COMPAT instead.
Signed-off-by: Tiberiu Szocs-Mihai <tszocs@ixiacom.com>
Signed-off-by: Daniel Baluta <dbaluta@ixiacom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fixes following error seen on x86_64 kernel:
ioctl32(openl2tpd:7480): Unknown cmd fd(14) cmd(80487436){t:'t';sz:72} arg(ffa7e6c0) on socket:[105094]

The argument (struct pppol2tp_ioc_stats) uses "aligned_u64" and thus doesn't need
fixups.

Cc: James Chapman <jchapman@katalix.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

	compare_keys and ip_route_input_common rely on
rt_oif for distinguishing of input and output routes
with same keys values. But sometimes the input route has
also same hash chain (keyed by iif != 0) with the output
routes (keyed by orig_oif=0). Problem visible if running
with small number of rhash_entries.

	Fix them to use rt_route_iif instead. By this way
input route can not be returned to users that request
output route.

	The patch fixes the ip_rt_bug errors that were
reported in ip_local_out context, mostly for 255.255.255.255
destinations.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 655f8919
    bonding: add min links parameter to 802.3ad

and commit ebd8e497
    bonding: add all_slaves_active parameter

introduced new options to bonding, but didn't provide the documentation
for those options.

V2: add the default value for both options.
V3: document the exact behavior of min_links default value.
Signed-off-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using nanosleep() in an userspace application we get a ratelimit warning:

	NOHZ: local_softirq_pending 08

According to 481a8199 the problem is caused by
netif_rx() function. This patch replaces netif_rx() with netif_rx_ni() which
has to be used from process/softirq context.
Signed-off-by: Matvejchikov Ilya <matvejchikov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NF_STOLEN means skb was already freed
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: Fix build with DEBUG_PAGEALLOC enabled.

Commit d006199e72a9 ("serial: sh-sci: Regtype probing doesn't need to be
fatal.") made sci_init_single() return when sci_probe_regmap() succeeds,
although it should return when sci_probe_regmap() fails.  This causes
systems using the serial sh-sci driver to crash during boot.

Fix the problem by using the right return condition.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The generic library code already exports the generic function, this was
left-over from the ARM-specific version that just got removed.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 1eb19a12 ("lib/sha1: use the git implementation of
SHA-1"), the ARM SHA1 routines no longer work.  The reason? They
depended on the larger 320-byte workspace, and now the sha1 workspace is
just 16 words (64 bytes).  So the assembly version would overwrite the
stack randomly.

The optimized asm version is also probably slower than the new improved
C version, so there's no reason to keep it around.  At least that was
the case in git, where what appears to be the same assembly language
version was removed two years ago because the optimized C BLK_SHA1 code
was faster.
Reported-and-tested-by: Joachim Eastwood <manabian@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

task->cred is declared as __rcu, and access to other tasks' ->cred is,
indeed, protected.  Access to current->cred does not need rcu_dereference()
at all, since only the task itself can change its ->cred.  sparse, of
course, has no way of knowing that...

Add force-cast in current_cred(), make current_fsuid() et.al. use it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Al points out that the do_follow_link() helper function really is
misnamed - it's about whether we should try to follow a symlink or not,
not about actually doing the following.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

After commit 3567866b: "RCUify freeing acls, let check_acl() go ahead in
RCU mode if acl is cached" posix_acl_permission is being called with an
unsupported flag and the permission check fails. This patch fixes the issue.
Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  ore: Make ore its own module
  exofs: Rename raid engine from exofs/ios.c => ore
  exofs: ios: Move to a per inode components & device-table
  exofs: Move exofs specific osd operations out of ios.c
  exofs: Add offset/length to exofs_get_io_state
  exofs: Fix truncate for the raid-groups case
  exofs: Small cleanup of exofs_fill_super
  exofs: BUG: Avoid sbi realloc
  exofs: Remove pnfs-osd private definitions
  nfs_xdr: Move nfs4_string definition out of #ifdef CONFIG_NFS_V4

The inode structure layout is largely random, and some of the vfs paths
really do care.  The path lookup in particular is already quite D$
intensive, and profiles show that accessing the 'inode->i_op->xyz'
fields is quite costly.

We already optimized the dcache to not unnecessarily load the d_op
structure for members that are often NULL using the DCACHE_OP_xyz bits
in dentry->d_flags, and this does something very similar for the inode
ops that are used during pathname lookup.

It also re-orders the fields so that the fields accessed by 'stat' are
together at the beginning of the inode structure, and roughly in the
order accessed.

The effect of this seems to be in the 1-2% range for an empty kernel
"make -j" run (which is fairly kernel-intensive, mostly in filename
lookup), so it's visible.  The numbers are fairly noisy, though, and
likely depend a lot on exact microarchitecture.  So there's more tuning
to be done.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Gcc tends to generate better code with small integers, including the
DCACHE_xyz flag tests - so move the common ones to be first in the list.
Also just remove the unused DCACHE_INOTIFY_PARENT_WATCHED and
DCACHE_AUTOFS_PENDING values, their users no longer exists in the source
tree.

And add a "unlikely()" to the DCACHE_OP_COMPARE test, since we want the
common case to be a nice straight-line fall-through.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net: Compute protocol sequence numbers and fragment IDs using MD5.
  crypto: Move md5_transform to lib/md5.c

Export everything from ore need exporting. Change Kbuild and Kconfig
to build ore.ko as an independent module. Import ore from exofs
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>

ORE stands for "Objects Raid Engine"

This patch is a mechanical rename of everything that was in ios.c
and its API declaration to an ore.c and an osd_ore.h header. The ore
engine will later be used by the pnfs objects layout driver.

* File ios.c => ore.c

* Declaration of types and API are moved from exofs.h to a new
  osd_ore.h

* All used types are prefixed by ore_ from their exofs_ name.

* Shift includes from exofs.h to osd_ore.h so osd_ore.h is
  independent, include it from exofs.h.

Other than a pure rename there are no other changes. Next patch
will move the ore into it's own module and will export the API
to be used by exofs and later the layout driver
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>