- 31 Aug, 2016 32 commits
-
-
stephen hemminger authored
Casting away const is bad practice. Since this is ARM specific driver don't have hardware actually test this. Having getter functions for ops is really unnecessary code bloat, but not going to touch that. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: add MDB support This patchset adds the switchdev MDB object support to the DSA layer. The MDB support for the mv88e6xxx driver is very similar to the FDB support. The FDB operations care about unicast addresses while the MDB operations care about multicast addresses. Both operation set load/purge/dump the Address Translation Table (ATU), thus common code is used. Changes in v2 based on Andrew's comments: - drop "group" in multicast database related doc and comment - change _one for more relevant _fid in mv88e6xxx_port_db_dump_one - return -EOPNOTSUPP if switchdev obj ID is neither _FDB nor _MDB ==================== Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Vivien Didelot authored
Add support for the MDB operations. This consists of loading/purging/dumping multicast addresses for a given port in the ATU. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
The MDB support for the mv88e6xxx driver will be very similar to the FDB support, since it consists of loading/purging/dumping address to/from the Address Translation Unit (ATU). Prepare the support for MDB by making the FDB code accessing the ATU generic. The FDB operations now provide access to the unicast addresses while the MDB operations will provide access to the multicast addresses. Signed-off-by:
-
Vivien Didelot authored
Add SWITCHDEV_OBJ_ID_PORT_MDB support to the DSA layer. Signed-off-by:
-
David S. Miller authored
Raghu Vatsavayi says: ==================== liquidio CN23XX support Following patchset adds support for new device "CN23XX" in liquidio family of adapters. As adviced by you I have split the previous V3 patch of 18 patches into two halves. This first patchset has first 10 patches, which are tested against net-next. I will post the second half after this one. This V4 patch also addressed all the comments from previous submission: 1) Avoid busy loop while reading registers. 2) Other minor comments about debug messages and constants. Please apply patches in following order as some of the patches depend on earlier patches. ==================== Signed-off-by: -
Raghu Vatsavayi authored
Add firmware download support for cn23xx device. Signed-off-by:
Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by:
Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by:
Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by:
Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by:
-
Raghu Vatsavayi authored
This patch adds support msix interrupt for cn23xx device. Signed-off-by:
-
Raghu Vatsavayi authored
This patch adds support for cn23xx queue manipulation. Signed-off-by:
-
Raghu Vatsavayi authored
Adds support for initializing cn23xx device registers related to mac, input/output and pf global config. Signed-off-by:
-
Raghu Vatsavayi authored
Add support for cn23xx device init and sriov queue config. Signed-off-by:
-
Raghu Vatsavayi authored
Add support for cn23xx specific queue definitions and features. Signed-off-by:
-
Raghu Vatsavayi authored
This patch adds register definitions and structures for new device cn23xx. Signed-off-by:
-
Raghu Vatsavayi authored
Add support of common irq enable functionality for both iq(instruction queue) and oq(output queue). Signed-off-by:
-
Raghu Vatsavayi authored
This patch contains changes for firmware version management. Signed-off-by:
-
Raghu Vatsavayi authored
Consolidate common functionality of various devices from different files into lio_core.c/octeon_console.c. Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Julia Lawall authored
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Julia Lawall authored
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by:
-
Julia Lawall authored
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by:
-
Julia Lawall authored
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by:
-
Julia Lawall authored
Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by:
Mark Einon <mark.einon@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
The addition of the per-queue statistics introduced a harmless warning on all 32-bit architectures: drivers/net/ethernet/qlogic/qede/qede_ethtool.c: In function 'qede_get_ethtool_stats': drivers/net/ethernet/qlogic/qede/qede_ethtool.c:244:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] buf[cnt++] = QEDE_TQSTATS_DATA(edev, ^ drivers/net/ethernet/qlogic/qede/qede_ethtool.c:244:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] buf[cnt++] = QEDE_TQSTATS_DATA(edev, ^ This changes the cast to 'void *' to shut up the warning, which avoids the assumptions on the size of the pointer type. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Fixes: 68db9ec2 ("qede: Add support for per-queue stats.") Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_PM_SLEEP is disabled, we get a couple of harmless warnings: drivers/net/ethernet/renesas/ravb_main.c:2117:12: error: 'ravb_resume' defined but not used [-Werror=unused-function] drivers/net/ethernet/renesas/ravb_main.c:2104:12: error: 'ravb_suspend' defined but not used [-Werror=unused-function] The simplest solution here is to replace the #ifdef with __maybe_unused annotations, which lets the compiler do the right thing by itself. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: mpls: fragmentation and gso fixes for locally originated traffic This series fixes mtu and fragmentation for tunnels using lwtunnel output redirect, and fixes GSO for MPLS for locally originated traffic reported by Lennert Buytenhek. A follow on series will address fragmentation and GSO for forwarded MPLS traffic. Hardware offload of GSO with MPLS also needs to be addressed. Simon: Can you verify this works with OVS for single and multiple labels? v4 - more updates to mpls_gso_segment per Alex's comments (thanks, Alex) - updates to teaching OVS about marking MPLS labels as the network header v3 - updates to mpls_gso_segment per Alex's comments - dropped skb->encapsulation = 1 from mpls_xmit per Alex's comment v2 - consistent use of network_header in skb to fix GSO for MPLS - update MPLS code in OVS to network_header and inner_network_header ==================== Tested-by:Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
David Ahern authored
veth does not really transmit packets only moves the skb from one netdev to another so gso and checksum is not really needed. Add the features to mpls_features to get the same benefit and performance with MPLS as without it. Reported-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
David Ahern authored
As reported by Lennert the MPLS GSO code is failing to properly segment large packets. There are a couple of problems: 1. the inner protocol is not set so the gso segment functions for inner protocol layers are not getting run, and 2 MPLS labels for packets that use the "native" (non-OVS) MPLS code are not properly accounted for in mpls_gso_segment. The MPLS GSO code was added for OVS. It is re-using skb_mac_gso_segment to call the gso segment functions for the higher layer protocols. That means skb_mac_gso_segment is called twice -- once with the network protocol set to MPLS and again with the network protocol set to the inner protocol. This patch sets the inner skb protocol addressing item 1 above and sets the network_header and inner_network_header to mark where the MPLS labels start and end. The MPLS code in OVS is also updated to set the two network markers. >From there the MPLS GSO code uses the difference between the network header and the inner network header to know the size of the MPLS header that was pushed. It then pulls the MPLS header, resets the mac_len and protocol for the inner protocol and then calls skb_mac_gso_segment to segment the skb. Afterward the inner protocol segmentation is done the skb protocol is set to mpls for each segment and the network and mac headers restored. Reported-by:
-
Roopa Prabhu authored
Today mpls iptunnel lwtunnel_output redirect expects the tunnel output function to handle fragmentation. This is ok but can be avoided if we did not do the mpls output redirect too early. ie we could wait until ip fragmentation is done and then call mpls output for each ip fragment. To make this work we will need, 1) the lwtunnel state to carry encap headroom 2) and do the redirect to the encap output handler on the ip fragment (essentially do the output redirect after fragmentation) This patch adds tunnel headroom in lwtstate to make sure we account for tunnel data in mtu calculations during fragmentation and adds new xmit redirect handler to redirect to lwtunnel xmit func after ip fragmentation. This includes IPV6 and some mtu fixes and testing from David Ahern. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
After commit 145dd5f9 ("net: flush the softnet backlog in process context"), we can easily batch calls to flush_all_backlogs() for all devices processed in rollback_registered_many() Tested: Before patch, on an idle host. modprobe dummy numdummies=10000 perf stat -e context-switches -a rmmod dummy Performance counter stats for 'system wide': 1,211,798 context-switches 1.302137465 seconds time elapsed After patch: perf stat -e context-switches -a rmmod dummy Performance counter stats for 'system wide': 225,523 context-switches 0.721623566 seconds time elapsed Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Mark Rustad authored
Remove a useless log message and improve the logic for setting a PHY address from the contents of the MNG_IF_SEL register. Signed-off-by:
Mark Rustad <mark.d.rustad@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'rxrpc-rewrite-20160830-1' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Preparation for removal of use of skbs from AFS Here's a set of patches that prepare the way for the removal of the use of sk_buffs from fs/afs (they'll be entirely retained within net/rxrpc): (1) Fix a potential NULL-pointer deref in rxrpc_abort_calls(). (2) Condense all the terminal call state machine states to a single one plus supplementary info. (3) Add a trace point for rxrpc call usage debugging. (4) Cleanups and missing headers. (5) Provide a way for AFS to ask about a call's peer address without having an sk_buff to query. (6) Use call->peer directly rather than going via call->conn (which might be NULL). (7) Pass struct socket * to various rxrpc kernel interface functions so they can use that directly rather than getting it from the rxrpc_call struct. ==================== Signed-off-by:
-
Colin Ian King authored
Trivial fix to spelling mistake in dev_warn message. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
- 30 Aug, 2016 8 commits
-
-
David Howells authored
Pass struct socket * to more rxrpc kernel interface functions. They should be starting from this rather than the socket pointer in the rxrpc_call struct if they need to access the socket. I have left: rxrpc_kernel_is_data_last() rxrpc_kernel_get_abort_code() rxrpc_kernel_get_error_number() rxrpc_kernel_free_skb() rxrpc_kernel_data_consumed() unmodified as they're all about to be removed (and, in any case, don't touch the socket). Signed-off-by:David Howells <dhowells@redhat.com>
-
David Howells authored
Use call->peer rather than call->conn->params.peer as call->conn may become NULL. Signed-off-by: -
David Howells authored
Provide a function so that kernel users, such as AFS, can ask for the peer address of a call: void rxrpc_kernel_get_peer(struct rxrpc_call *call, struct sockaddr_rxrpc *_srx); In the future the kernel service won't get sk_buffs to look inside. Further, this allows us to hide any canonicalisation inside AF_RXRPC for when IPv6 support is added. Also propagate this through to afs_find_server() and issue a warning if we can't handle the address family yet. Signed-off-by: -
David Howells authored
We should #include linux/random.h to use get_random(). Signed-off-by: -
David Howells authored
Remove one #ifndef'd-out variable and a couple of excessive blank lines. Signed-off-by: -
David Howells authored
Add a trace event for debuging rxrpc_call struct usage. Signed-off-by: -
David Howells authored
Condense the terminal states of a call state machine to a single state, plus a separate completion type value. The value is then set, along with error and abort code values, only when the call is transitioned to the completion state. Helpers are provided to simplify this. Signed-off-by: -
David Howells authored
The call pointer in a channel on a connection will be NULL if there's no active call on that channel. rxrpc_abort_calls() needs to check for this before trying to take the call's state_lock. Signed-off-by:
-
