* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  eHEA: Fix bonding support
  Blackfin ethernet driver: on chip ethernet MAC controller driver
  fix wrong argument of tc35815_read_plat_dev_addr()
  ARM/ETHER3: Handle multicast frames.
  SAA9730: Handle multicast frames.
  NI5010: Handle multicast frames.
  NS83820: Handle multicast frames.
  Fix RGMII-ID handling in gianfar
  Fix Vitesse RGMII-ID support
  Add phy-connection-type to gianfar nodes
  Fix Vitesse 824x PHY interrupt acking
  [PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54
  [PATCH] zd1211rw: Add ID for Planex GW-US54GXS
  [PATCH] Update version ipw2200 stamp to 1.2.2
  [PATCH] ipw2200: Fix ipw_isr() comments error on shared IRQ
  [PATCH] Fix ipw2200 set wrong power parameter causing firmware error
  [PATCH] ipw2100: Fix `iwpriv set_power` error
  [PATCH] softmac: Channel is listed twice in scan output

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (24 commits)
  [CIFS] merge conflict in fs/cifs/export.c
  [CIFS] Allow disabling CIFS Unix Extensions as mount option
  [CIFS] More whitespace/formatting fixes (noticed by checkpatch)
  [CIFS] Typo in previous patch
  [CIFS] zero_user_page() conversions
  [CIFS] use simple_prepare_write to zero page data
  [CIFS] Fix build break - inet.h not included when experimental ifdef off
  [CIFS] Add support for new POSIX unlink
  [CIFS] whitespace/formatting fixes
  [CIFS] Fix oops in cifs_create when nfsd server exports cifs mount
  [CIFS] whitespace cleanup
  [CIFS] Fix packet signatures for NTLMv2 case
  [CIFS] more whitespace fixes
  [CIFS] more whitespace cleanup
  [CIFS] whitespace cleanup
  [CIFS] whitespace cleanup
  [CIFS] ipv6 support no longer experimental
  [CIFS] Mount should fail if server signing off but client mount option requires it
  [CIFS] whitespace fixes
  [CIFS] Fix sign mount option and sign proc config setting
  ...

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/docs-2.6:
  zh_CN/HOWTO: update URLs of git trees
  Chinese translation of Documentation/stable_api_nonsense.txt
  HOWTO: add Chinese translation of Documentation/HOWTO
  Documentation: add Japanese translated stable_api_nonsense.txt
  HOWTO: add Japanese translation of Documentation/HOWTO

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  sysfs: cosmetic clean up on node creation failure paths
  sysfs: kill an extra put in sysfs_create_link() failure path
  Driver core: check return code of sysfs_create_link()
  HOWTO: Add the knwon_regression URI to the documentation
  dev_vdbg() documentation
  dev_vdbg(), available with -DVERBOSE_DEBUG
  sysfs: make sysfs_init_inode() static
  sysfs: fix sysfs root inode nlink accounting
  Documentation fix devres.txt: lib/iomap.c -> lib/devres.c
  sysfs: avoid kmem_cache_free(NULL)
  PM: remove deprecated dpm_runtime_* routines
  PM: Remove deprecated sysfs files
  Driver core: accept all valid action-strings in uevent-trigger
  debugfs: remove rmdir() non-empty complaint

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/uio-2.6:
  UIO: Hilscher CIF card driver
  UIO: Documentation
  UIO: Add the User IO core code

* 'for-linus' of git://linux-nfs.org/~bfields/linux:
  locks: fix vfs_test_lock() comment
  locks: make posix_test_lock() interface more consistent
  nfs: disable leases over NFS
  gfs2: stop giving out non-cluster-coherent leases
  locks: export setlease to filesystems
  locks: provide a file lease method enabling cluster-coherent leases
  locks: rename lease functions to reflect locks.c conventions
  locks: share more common lease code
  locks: clean up lease_alloc()
  locks: convert an -EINVAL return to a BUG
  leases: minor break_lease() comment clarification

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (29 commits)
  IB/mthca: Simplify use of size0 in work request posting
  IB/mthca: Factor out setting WQE UD segment entries
  IB/mthca: Factor out setting WQE remote address and atomic segment entries
  IB/mlx4: Factor out setting other WQE segments
  IB/mlx4: Factor out setting WQE data segment entries
  IB/mthca: Factor out setting WQE data segment entries
  IB/mlx4: Return receive queue sizes for userspace QPs from query QP
  IB/mlx4: Increase max outstanding RDMA reads as target
  RDMA/cma: Remove local write permission from QP access flags
  IB/mthca: Use uninitialized_var() for f0
  IB/cm: Make internal function cm_get_ack_delay() static
  IB/ipath: Remove ipath_get_user_pages_nocopy()
  IB/ipath: Make a few functions static
  mlx4_core: Reset device when internal error is detected
  IB/iser: Make a couple of functions static
  IB/mthca: Fix printk format used for firmware version in warning
  IB/mthca: Schedule MSI support for removal
  IB/ehca: Fix warnings issued by checkpatch.pl
  IB/ehca: Restructure ehca_set_pagebuf()
  IB/ehca: MR/MW structure refactoring
  ...

Conflicts:

	fs/cifs/export.c

Signed-off-by: Steve French <sfrench@us.ibm.com>

Previously the only way to do this was to umount all mounts to that server,
turn off a proc setting (/proc/fs/cifs/LinuxExtensionsEnabled).

Fixes Samba bugzilla bug number: 4582 (and also 2008)
Signed-off-by: Steve French <sfrench@us.ibm.com>

Thanks to Doug Chapman for pointing out that the comment here is
inconsistent with the function prototype.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>

Since posix_test_lock(), like fcntl() and ->lock(), indicates absence or
presence of a conflict lock by setting fl_type to, respectively, F_UNLCK
or something other than F_UNLCK, the return value is no longer needed.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>

As Peter Staubach says elsewhere
(http://marc.info/?l=linux-kernel&m=118113649526444&w=2):

> The problem is that some file system such as NFSv2 and NFSv3 do
> not have sufficient support to be able to support leases correctly.
> In particular for these two file systems, there is no over the wire
> protocol support.
>
> Currently, these two file systems fail the fcntl(F_SETLEASE) call
> accidentally, due to a reference counting difference.  These file
> systems should fail more consciously, with a proper error to
> indicate that the call is invalid for them.

Define an nfs setlease method that just returns -EINVAL.

If someone can demonstrate a real need, perhaps we could reenable
them in the presence of the "nolock" mount option.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Cc: Peter Staubach <staubach@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>

Since gfs2 can't prevent conflicting opens or leases on other nodes, we
probably shouldn't allow it to give out leases at all.

Put the newly defined lease operation into use in gfs2 by turning off
lease, unless we're using the "nolock' locking module (in which case all
locking is local anyway).
Signed-off-by: Marc Eshel <eshel@almaden.ibm.com>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>

Export setlease so it can used by filesystems to implement their lease
methods.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>

Currently leases are only kept locally, so there's no way for a distributed
filesystem to enforce them against multiple clients.  We're particularly
interested in the case of nfsd exporting a cluster filesystem, in which
case nfsd needs cluster-coherent leases in order to implement delegations
correctly.

Also add some documentation.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

We've been using the convention that vfs_foo is the function that calls
a filesystem-specific foo method if it exists, or falls back on a
generic method if it doesn't; thus vfs_foo is what is called when some
other part of the kernel (normally lockd or nfsd) wants to get a lock,
whereas foo is what filesystems call to use the underlying local
functionality as part of their lock implementation.

So rename setlease to vfs_setlease (which will call a
filesystem-specific setlease after a later patch) and __setlease to
setlease.

Also, vfs_setlease need only be GPL-exported as long as it's only needed
by lockd and nfsd.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>

Share more code between setlease (used by nfsd) and fcntl.

Also some minor cleanup.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Acked-by: Christoph Hellwig <hch@infradead.org>

Return the newly allocated structure as the return value instead of
using a struct ** parameter.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

There's no point trying to return an error in these cases, which all represent
bugs in the callers.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>

clarify that break_lease() checks for presence of any lock, not just leases.
Signed-off-by: David M. Richter <richterd@citi.umich.edu>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>

Addressing patch from Stefan Richter:
HOWTO: update URLs of git trees
(It will be better if we update this to commit-id later)
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a Chinese translated version of
Documentation/stable_api_nonsense.txt.

From: TripleX <zhongyu@18mail.cn>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is a Chinese translated version of Documentation/HOWTO.  Currently
Chinese involvement in Linux kernel is very low, especially comparing to
its largest population base.  Language could be the main obstacle.  Hope
this document will help more Chinese to contribute to Linux kernel.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: TripleX Chung <xxx.phy@gmail.com>
Signed-off-by: Maggie Chen <chenqi@beyondsoft.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: IKEDA, Munehiro <m-ikeda@ds.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Add the japanese translation of the Documentation/HOWTO file.
Signed-off-by: Tsugikazu Shibata <tshibata@ab.jp.nec.com>
Cc: IKEDA Munehiro <m-ikeda@ds.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

this is a patch that adds support for Hilscher CIF DeviceNet and
Profibus cards. I tested it on a Kontron CPX board, and Thomas reviewed
it.

You can find the user space part here:

http://www.osadl.org/projects/downloads/UIO/user/cif-0.1.0.tar.gz

Notes: cif_api.c is the main file you want to look at. It contains the
functions to open, close, mmap and so on. cif_dps.c adds functions
specific to Profibus cards, and cif_dn.c contains functions for
DeviceNet cards.  cif.c is a universal playground, it's just a small
test program.  The user space part of this UIO driver is still work in
progress, and not everything is tested yet. At the moment, the thread in
cif_api.c contains some code that artificially makes the card generate
interrupts, this was added for testing and will be removed later. But
the driver already contains all the functions needed for useful
operation, so it gives a good idea of how such a thing looks like.

For comparison, here's what you get from the manufacturer
(www.hilscher.com) when you ask for a Linux 2.6 driver:

http://www.tglx.de/private/hjk/cif-orig-2.6.tar.bz2

WARNING: Don't look at the code for too long, you might become sick :-)
Signed-off-by: Hans-Jürgen Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Documentation for the UIO interface

From: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This interface allows the ability to write the majority of a driver in
userspace with only a very small shell of a driver in the kernel itself.
It uses a char device and sysfs to interact with a userspace process to
process interrupts and control memory accesses.

See the docbook documentation for more details on how to use this
interface.

From: Hans J. Koch <hjk@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Node addition failure is detected by testing return value of
sysfs_addfm_finish() which returns the number of added and removed
nodes.  As the function is called as the last step of addition right
on top of error handling block, the if blocks looked like the
following.

	if (sysfs_addrm_finish(&acxt))
		success handling, usually return;
	/* fall through to error handling */

This is the opposite of usual convention in sysfs and makes the code
difficult to understand.  This patch inverts the test and makes those
blocks look more like others.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Gabriel C <nix.or.die@googlemail.com>
Cc: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There is a subtle bug in sysfs_create_link() failure path.  When
symlink creation fails because there's already a node with the same
name, the target sysfs_dirent is put twice - once by failure path of
sysfs_create_link() and once more when the symlink is released.

Fix it by making only the symlink node responsible for putting
target_sd.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Gabriel C <nix.or.die@googlemail.com>
Cc: Miles Lane <miles.lane@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Check for return value of sysfs_create_link() in device_add() and
device_rename().  Add helper functions device_add_class_symlinks() and
device_remove_class_symlinks() to make the code easier to read.

[akpm@linux-foundation.org: fix unused var warnings]
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We should let everybody know about where the regression
list is hosted. The more is known the more it is used.
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Cc: Li Yang <leoli@freescale.com>
Cc: TripleX Chung <xxx.phy@gmail.com>
Cc: Maggie Chen <chenqi@beyondsoft.com>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Tsugikazu Shibata <tshibata@ab.jp.nec.com>
Cc: IKEDA Munehiro <m-ikeda@ds.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Update CodingStyle to talk about "-DDEBUG" message conventions and the
new "-DVERBOSE_DEBUG" convention.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This defines a dev_vdbg() call, which is enabled with -DVERBOSE_DEBUG.
When enabled, dev_vdbg() acts just like dev_dbg().  When disabled, it is a
NOP ...  just like dev_dbg() without -DDEBUG.  The specific code was moved
out of a USB patch, but lots of drivers have similar support.

That is, code can now be written to use an additional level of debug
output, selected at compile time.  Many driver authors have found this
idiom to be very useful.  A typical usage model is for "normal" debug
messages to focus on fault paths and not be very "chatty", so that those
messages can be left on during normal operation without much of a
performance or syslog load.  On the other hand "verbose" messages would be
noisy enough that they wouldn't normally be enabled; they might even affect
timings enough to change system or driver behavior.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

With sysfs_fill_super() converted to use sysfs_get_inode(), there is
no user of sysfs_init_inode() outside of fs/sysfs/inode.c.  Make it
static.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

While making sysfs indoes hashed, sysfs root inode was left out.  Now
that nlink accounting depends on the inode being on the hash, sysfs
root inode nlink isn't adjusted properly.

Put sysfs root inode on the inode hash by allocating it using
sysfs_get_inode() like other sysfs inodes.  While at it, massage
comments a bit.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Brandon Philips <bphilips@suse.de>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

kmem_cache_free() with NULL is not allowed. But it may happen
if out of memory error is triggered in sysfs_new_dirent().
This patch fixes that error handling.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This patch (as933) removes the deprecated dpm_runtime_suspend() and
dpm_runtime_resume() routines from the PM core.  The only user of
those routines is the PCMCIA ds driver; local replacements are added.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>