The disk layout and volume information of a DASD reside in the first two
tracks of cylinder 0. When a DASD is set online, currently the first
three tracks are read and analysed to confirm an expected layout.

For CDL (Compatible Disk Layout) only count area data of the first track
is evaluated and checked against expected key and data lengths. For LDL
(Linux Disk Layout) the first and third track is evaluated. However,
an LDL formatted volume is expected to be in the same format across all
tracks. Checking the third track therefore doesn't have any more value
than checking any other track at random.

Now, an Extent Space Efficient (ESE) DASD is initialised by only
formatting the first two tracks, as those tracks always contain all
information necessarry.

Checking the third track on an ESE volume will therefore most likely
fail with a record not found error, as the third track will be empty.
This in turn leads to the device being recognised with a volume size of
0. Attempts to write volume information on the first two tracks then
fail with "no space left on device" errors.

Initialising the first three tracks for an ESE volume is not a viable
solution, because the third track is already a regular track and could
contain user data. With that there is potential for data corruption.

Instead, always only analyse the first two tracks, as it is sufficiant
for both CDL and LDL, and allow ESE volumes to be recognised as well.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Commit 4d284cac ("[S390] Avoid excessive inlining.") removed
bytes_per_record() which was the only user of the defines ECKD_C0 and
ECKD_F*, and round_up_multiple(). Let's get rid of those.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

There are structs that have never been used. There are also two function
prototypes which were forgotton in commit f9f8d02f ("[S390] dasd:
revert LCU optimization").

Clean up and keep the header file tidy.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Pull s390 updates from Vasily Gorbik:

 - Improve stop_machine wait logic: replace cpu_relax_yield call in
   generic stop_machine function with a weak stop_machine_yield
   function. This is overridden on s390, which yields the current cpu to
   the neighbouring cpu after a couple of retries, instead of blindly
   giving up the cpu to the hipervisor. This significantly improves
   stop_machine performance on s390 in overcommitted scenarios.

   This includes common code changes which have been Acked by Peter
   Zijlstra and Thomas Gleixner.

 - Improve jump label transformation speed: transform jump labels
   without using stop_machine.

 - Refactoring of the vfio-ccw cp handling, simplifying the code and
   avoiding unneeded allocating/copying.

 - Various vfio-ccw fixes (ccw translation, state machine).

 - Add support for vfio-ap queue interrupt control in the guest. This
   includes s390 kvm changes which have been Acked by Christian
   Borntraeger.

 - Add protected virtualization support for virtio-ccw.

 - Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to
   remove some code which most likely isn't working at all, besides that
   s390 didn't even compile for !CONFIG_SMP.

 - Support for special flagged EP11 CPRBs for zcrypt.

 - Handle PCI devices with no support for new MIO instructions.

 - Avoid KASAN false positives in reworked stack unwinder.

 - Couple of fixes for the QDIO layer.

 - Convert s390 specific documentation to ReST format.

 - Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if
   hardware is missing. This way our modules behave like most other
   modules and which is also what systemd's systemd-modules-load.service
   expects.

 - Replace defconfig with performance_defconfig, so there is one config
   file less to maintain.

 - Remove the SCLP call home device driver, which was never useful.

 - Cleanups all over the place.

* tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits)
  docs: s390: s390dbf: typos and formatting, update crash command
  docs: s390: unify and update s390dbf kdocs at debug.c
  docs: s390: restore important non-kdoc parts of s390dbf.rst
  vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1
  s390/pci: correctly handle MIO opt-out
  s390/pci: deal with devices that have no support for MIO instructions
  s390: ap: kvm: Enable PQAP/AQIC facility for the guest
  s390: ap: implement PAPQ AQIC interception in kernel
  vfio: ap: register IOMMU VFIO notifier
  s390: ap: kvm: add PQAP interception for AQIC
  s390/unwind: cleanup unused READ_ONCE_TASK_STACK
  s390/kasan: avoid false positives during stack unwind
  s390/qdio: don't touch the dsci in tiqdio_add_input_queues()
  s390/qdio: (re-)initialize tiqdio list entries
  s390/dasd: Fix a precision vs width bug in dasd_feature_list()
  s390/cio: introduce driver_override on the css bus
  vfio-ccw: make convert_ccw0_to_ccw1 static
  vfio-ccw: Remove copy_ccw_from_iova()
  vfio-ccw: Factor out the ccw0-to-ccw1 transition
  vfio-ccw: Copy CCW data outside length calculation
  ...

Pull m68k updates from Geert Uytterhoeven:

  - switch to using the generic remapping DMA allocator

  - defconfig updates

* tag 'm68k-for-v5.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Implement arch_dma_prep_coherent()
  m68k: Use the generic dma coherent remap allocator
  m68k: defconfig: Update defconfigs for v5.2-rc1

Pull arm64 updates from Catalin Marinas:

 - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}

 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly

 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)

 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
   XAFLAG and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)

 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)

 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic

 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms

 - perf: DDR performance monitor support for iMX8QXP

 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers

 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent

 - arm64 do_page_fault() and hugetlb cleanups

 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)

 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
   'arm_boot_flags' introduced in 5.1)

 - CONFIG_RANDOMIZE_BASE now enabled in defconfig

 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area

 - Make ZONE_DMA32 configurable

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  perf: arm_spe: Enable ACPI/Platform automatic module loading
  arm_pmu: acpi: spe: Add initial MADT/SPE probing
  ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
  ACPI/PPTT: Modify node flag detection to find last IDENTICAL
  x86/entry: Simplify _TIF_SYSCALL_EMU handling
  arm64: rename dump_instr as dump_kernel_instr
  arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
  arm64: Implement panic_smp_self_stop()
  arm64: Improve parking of stopped CPUs
  arm64: Expose FRINT capabilities to userspace
  arm64: Expose ARMv8.5 CondM capability to userspace
  arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
  arm64: ARM64_MODULES_PLTS must depend on MODULES
  arm64: bpf: do not allocate executable memory
  arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
  arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
  arm64: module: create module allocations without exec permissions
  arm64: Allow user selection of ARM64_MODULE_PLTS
  acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
  arm64: Allow selecting Pseudo-NMI again
  ...

Pull block fix from Jens Axboe:
 "Just a single fix for a patch from Greg KH, which reportedly break
  block debugfs locations for certain setups. Trivial enough that I
  think we should include it now, rather than wait and release 5.2 with
  it, since it's a regression in this series"

* tag 'for-linus-20190706' of git://git.kernel.dk/linux-block:
  blk-mq: fix up placement of debugfs directory of queue files

Pull MIPS fixes from Paul Burton:
 "A few more MIPS fixes:

   - Fix a silly typo in virt_addr_valid which led to completely bogus
     behavior (that happened to stop tripping up hardened usercopy
     despite being broken).

   - Fix UART parity setup on AR933x systems.

   - A build fix for non-Linux build machines.

   - Have the 'all' make target build DTBs, primarily to fit in with the
     behavior of scripts/package/builddeb.

   - Handle an execution hazard in TLB exceptions that use KScratch
     registers, which could inadvertently clobber the $1 register on
     some generally higher-end out-of-order CPUs.

   - A MAINTAINERS update to fix the path to the NAND driver for Ingenic
     systems"

* tag 'mips_fixes_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MAINTAINERS: Correct path to moved files
  MIPS: Add missing EHB in mtc0 -> mfc0 sequence.
  MIPS: have "plain" make calls build dtbs for selected platforms
  MIPS: fix build on non-linux hosts
  MIPS: ath79: fix ar933x uart parity mode
  MIPS: Fix bounds check virt_addr_valid

Pull dmaengine fixes from Vinod Koul:

 - bam_dma fix for completed descriptor count

 - fix for imx-sdma remove BD_INTR for channel0 and use-after-free on
   probe error path

 - endian bug fix in jz4780 IRQ handler

* tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: qcom: bam_dma: Fix completed descriptors count
  dmaengine: imx-sdma: remove BD_INTR for channel0
  dmaengine: imx-sdma: fix use-after-free on probe error path
  dmaengine: jz4780: Fix an endian bug in IRQ handler

Pull SCSI fixes from James Bottomley:
 "Two iscsi fixes.

  One for an oops in the client which can be triggered by the server
  authentication protocol and the other in the target code which causes
  data corruption"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported
  scsi: target/iblock: Fix overrun in WRITE SAME emulation

Pull vfs fixlet from Al Viro:
 "Fix bogus default y in Kconfig (VALIDATE_FS_PARSER)

  That thing should not be turned on by default, especially since it's
  not quiet in case it finds no problems. Geert has sent the obvious fix
  quite a few times, but it fell through the cracks"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: VALIDATE_FS_PARSER should default to n

When the blk-mq debugfs file creation logic was "cleaned up" it was
cleaned up too much, causing the queue file to not be created in the
correct location.  Turns out the check for the directory being present
is needed as if that has not happened yet, the files should not be
created, and the function will be called later on in the initialization
code so that the files can be created in the correct location.

Fixes: 6cfc0081 ("blk-mq: no need to check return value of debugfs_create functions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: linux-block@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This reverts commit 5fd4ca2d.

Mikhail Gavrilov reports that it causes the VM_BUG_ON_PAGE() in
__delete_from_swap_cache() to trigger:

   page:ffffd6d34dff0000 refcount:1 mapcount:1 mapping:ffff97812323a689 index:0xfecec363
   anon
   flags: 0x17fffe00080034(uptodate|lru|active|swapbacked)
   raw: 0017fffe00080034 ffffd6d34c67c508 ffffd6d3504b8d48 ffff97812323a689
   raw: 00000000fecec363 0000000000000000 0000000100000000 ffff978433ace000
   page dumped because: VM_BUG_ON_PAGE(entry != page)
   page->mem_cgroup:ffff978433ace000
   ------------[ cut here ]------------
   kernel BUG at mm/swap_state.c:170!
   invalid opcode: 0000 [#1] SMP NOPTI
   CPU: 1 PID: 221 Comm: kswapd0 Not tainted 5.2.0-0.rc2.git0.1.fc31.x86_64 #1
   Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 2202 04/11/2019
   RIP: 0010:__delete_from_swap_cache+0x20d/0x240
   Code: 30 65 48 33 04 25 28 00 00 00 75 4a 48 83 c4 38 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c6 2f dc 0f 8a 48 89 c7 e8 93 1b fd ff <0f> 0b 48 c7 c6 a8 74 0f 8a e8 85 1b fd ff 0f 0b 48 c7 c6 a8 7d 0f
   RSP: 0018:ffffa982036e7980 EFLAGS: 00010046
   RAX: 0000000000000021 RBX: 0000000000000040 RCX: 0000000000000006
   RDX: 0000000000000000 RSI: 0000000000000086 RDI: ffff97843d657900
   RBP: 0000000000000001 R08: ffffa982036e7835 R09: 0000000000000535
   R10: ffff97845e21a46c R11: ffffa982036e7835 R12: ffff978426387120
   R13: 0000000000000000 R14: ffffd6d34dff0040 R15: ffffd6d34dff0000
   FS:  0000000000000000(0000) GS:ffff97843d640000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   CR2: 00002cba88ef5000 CR3: 000000078a97c000 CR4: 00000000003406e0
   Call Trace:
    delete_from_swap_cache+0x46/0xa0
    try_to_free_swap+0xbc/0x110
    swap_writepage+0x13/0x70
    pageout.isra.0+0x13c/0x350
    shrink_page_list+0xc14/0xdf0
    shrink_inactive_list+0x1e5/0x3c0
    shrink_node_memcg+0x202/0x760
    shrink_node+0xe0/0x470
    balance_pgdat+0x2d1/0x510
    kswapd+0x220/0x420
    kthread+0xfb/0x130
    ret_from_fork+0x22/0x40

and it's not immediately obvious why it happens.  It's too late in the
rc cycle to do anything but revert for now.

Link: https://lore.kernel.org/lkml/CABXGCsN9mYmBD-4GaaeW_NrDu+FDXLzr_6x+XNxfmFV6QkYCDg@mail.gmail.com/Reported-and-bisected-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Kirill Shutemov <kirill@shutemov.name>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm fixes from Paolo Bonzini:
 "x86 bugfix patches and one compilation fix for ARM"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: arm64/sve: Fix vq_present() macro to yield a bool
  KVM: LAPIC: Fix pending interrupt in IRR blocked by software disable LAPIC
  KVM: nVMX: Change KVM_STATE_NESTED_EVMCS to signal vmcs12 is copied from eVMCS
  KVM: nVMX: Allow restore nested-state to enable eVMCS when vCPU in SMM
  KVM: x86: degrade WARN to pr_warn_ratelimited

Pull mtf fixes from Miquel Raynal:

 - Fix the memory organization structure of a Macronix SPI-NAND chip.

 - Fix a build dependency wrongly described.

 - Fix the sunxi NAND driver for A23/A33 SoCs by (a) reverting the
   faulty commit introducing broken DMA support and (b) applying another
   commit bringing working DMA support.

* tag 'mtd/fixes-for-5.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configuration
  Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support"
  mtd: rawnand: ingenic: Fix ingenic_ecc dependency
  mtd: spinand: Fix max_bad_eraseblocks_per_lun info in memorg

Pull i2c fixlet from Wolfram Sang:
 "I2C has a MAINTAINERS update which will be benfitial for developers,
  so let's add it right away"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: tegra: Add Dmitry as a reviewer

Pull nfsd fixes from Bruce Fields:
 "Two more quick bugfixes for nfsd: fixing a regression causing mount
  failures on high-memory machines and fixing the DRC over RDMA"

* tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux:
  nfsd: Fix overflow causing non-working mounts on 1 TB machines
  svcrdma: Ignore source port when computing DRC hash

Allwinner NAND controllers can make use of DMA to enhance the I/O
throughput thanks to ECC pipelining. DMA handling with A23/A33 NAND IP
is a bit different than with the older SoCs, hence the introduction of
a new compatible to handle:
* the differences between register offsets,
* the burst length change from 4 to minimum 8,
* manage SRAM accesses through MBUS with extra configuration.

Fixes: c49836f0 ("mtd: rawnand: sunxi: Add A23/A33 DMA support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

This reverts commit c49836f0.

The commit is wrong and its approach actually does not work. Let's
revert it in order to add the feature with a clean patch.

Fixes: c49836f0 ("mtd: rawnand: sunxi: Add A23/A33 DMA support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

I'm contributing to Tegra's upstream development in general and happened
to review the Tegra's I2C patches for awhile because I'm actively using
upstream kernel on all of my Tegra-powered devices and initially some of
the submitted patches were getting my attention since they were causing
problems. Recently Wolfram Sang asked whether I'm interested in becoming
a reviewer for the driver and I don't mind at all.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
[wsa: ack was expressed by Thierry Reding in a mail thread]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser
tables are vaguely sane.  It was set to default to 'Y' for the moment to
catch errors in upcoming fs conversion development.

Make sure it is not enabled by default in the final release of v5.1.

Fixes: 31d921c7 ("vfs: Add configuration parser helpers")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1562149189-1417-4-git-send-email-maier@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

For non-static-inlines, debug.c already had non-compliant function
header docs. So move the pure prototype kdocs of
("s390: include/asm/debug.h add kerneldoc markups")
from debug.h to debug.c and merge them with the old function docs.
Also, I had the impression that kdoc typically is at the implementation
in the compile unit rather than at the prototype in the header file.

While at it, update the short kdoc description to distinguish the
different functions. And a few more consistency cleanups.

Added a new kdoc for debug_set_critical() since debug.h comments it
as part of the API.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1562149189-1417-3-git-send-email-maier@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Complements previous ("s390: include/asm/debug.h add kerneldoc markups")
which seemed to have dropped important non-kdoc parts such as
user space interface (level, size, flush)
as well as views and caution regarding strings in the sprintf view.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <1562149189-1417-2-git-send-email-maier@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

Merge tag 'vfio-ccw-20190705' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features

Fix a bug introduced in the refactoring.

* tag 'vfio-ccw-20190705' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw:
  vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>

The original implementation of vq_present() relied on aggressive
inlining in order for the compiler to know that the code is
correct, due to some const-casting issues.  This was causing sparse
and clang to complain, while GCC compiled cleanly.

Commit 0c529ff7 addressed this problem, but since vq_present()
is no longer a function, there is now no implicit casting of the
returned value to the return type (bool).

In set_sve_vls(), this uncast bit value is compared against a bool,
and so may spuriously compare as unequal when both are nonzero.  As
a result, KVM may reject valid SVE vector length configurations as
invalid, and vice versa.

Fix it by forcing the returned value to a bool.
Signed-off-by: Zhang Lei <zhang.lei@jp.fujitsu.com>
Fixes: 0c529ff7 ("KVM: arm64: Implement vq_present() as a macro")
Signed-off-by: Dave Martin <Dave.Martin@arm.com> [commit message rewrite]
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

One space is left unused in circular FIFO to differentiate
'full' and 'empty' cases. So take that in to account while
counting for the descriptors completed.

Fixes the issue reported here,
	https://lkml.org/lkml/2019/6/18/669

Cc: stable@vger.kernel.org
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

It is possible for an irq triggered by channel0 to be received later
after clks are disabled once firmware loaded during sdma probe. If
that happens then clearing them by writing to SDMA_H_INTR won't work
and the kernel will hang processing infinite interrupts. Actually,
don't need interrupt triggered on channel0 since it's pollling
SDMA_H_STATSTOP to know channel0 done rather than interrupt in
current code, just clear BD_INTR to disable channel0 interrupt to
avoid the above case.
This issue was brought by commit 1d069bfa ("dmaengine: imx-sdma:
ack channel 0 IRQ in the interrupt handler") which didn't take care
the above case.

Fixes: 1d069bfa ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler")
Cc: stable@vger.kernel.org #5.0+
Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Reported-by: Sven Van Asbroeck <thesven73@gmail.com>
Tested-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

If probe() fails anywhere beyond the point where
sdma_get_firmware() is called, then a kernel oops may occur.

Problematic sequence of events:
1. probe() calls sdma_get_firmware(), which schedules the
   firmware callback to run when firmware becomes available,
   using the sdma instance structure as the context
2. probe() encounters an error, which deallocates the
   sdma instance structure
3. firmware becomes available, firmware callback is
   called with deallocated sdma instance structure
4. use after free - kernel oops !

Solution: only attempt to load firmware when we're certain
that probe() will succeed. This guarantees that the firmware
callback's context will remain valid.

Note that the remove() path is unaffected by this issue: the
firmware loader will increment the driver module's use count,
ensuring that the module cannot be unloaded while the
firmware callback is pending or running.
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Reviewed-by: Robin Gong <yibin.gong@nxp.com>
[vkoul: fixed braces for if condition]
Signed-off-by: Vinod Koul <vkoul@kernel.org>

The "pending" variable was a u32 but we cast it to an unsigned long
pointer when we do the for_each_set_bit() loop.  The problem is that on
big endian 64bit systems that results in an out of bounds read.

Fixes: 4e4106f5 ("dmaengine: jz4780: Fix transfers being ACKed too soon")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>

When processing Format-0 CCWs, we use the "len" variable as the
number of CCWs to convert to Format-1.  But that variable
contains zero here, and is not a meaningful CCW count until
ccwchain_calc_length() returns.  Since that routine requires and
expects Format-1 CCWs to identify the chaining behavior, the
format conversion must be done first.

Convert the 2KB we copied even if it's more than we need.

Fixes: 7f8e89a8 ("vfio-ccw: Factor out the ccw0-to-ccw1 transition")
Reported-by: Farhan Ali <alifm@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190702180928.18113-1-farman@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>

Pull drm fixes from Dave Airlie:
 "I skipped last week because there wasn't much worth doing, this week
  got a few more fixes in.

  amdgpu:
   - default register value change
   - runpm regression fix
   - fan control fix

  i915:
   - fix Ironlake regression

  panfrost:
   - fix a double free

  virtio:
   - fix a locking bug

  imx:
   - crtc disable fixes"

* tag 'drm-fixes-2019-07-05-1' of git://anongit.freedesktop.org/drm/drm:
  drm/imx: only send event on crtc disable if kept disabled
  drm/imx: notify drm core before sending event during crtc disable
  drm/i915/ringbuffer: EMIT_INVALIDATE *before* switch context
  drm/amdgpu/gfx9: use reset default for PA_SC_FIFO_SIZE
  drm/amdgpu: Don't skip display settings in hwmgr_resume()
  drm/amd/powerplay: use hardware fan control if no powerplay fan table
  drm/panfrost: Fix a double-free error
  drm/etnaviv: add missing failure path to destroy suballoc
  drm/virtio: move drm_connector_update_edid_property() call

drm/imx: fix stale vblank timestamp after a modeset

This series fixes stale vblank timestamps in the first event sent after
a crtc was disabled. The core now is notified via drm_crtc_vblank_off
before sending the last pending event in atomic_disable. If the crtc is
reenabled right away during to a modeset, the event is not sent at all,
as the next vblank will take care of it.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1562237119.6641.16.camel@pengutronix.de

Pull crypto fixes from Herbert Xu:
 "This fixes two memory leaks and a list corruption bug"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: user - prevent operating on larval algorithms
  crypto: cryptd - Fix skcipher instance memory leak
  lib/mpi: Fix karactx leak in mpi_powm

Merge more fixes from Andrew Morton:
 "5 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  swap_readpage(): avoid blk_wake_io_task() if !synchronous
  devres: allow const resource arguments
  mm/vmscan.c: prevent useless kswapd loops
  fs/userfaultfd.c: disable irqs for fault_pending and event locks
  mm/page_alloc.c: fix regression with deferred struct page init

Pull ARM SoC fixes from Olof Johansson:
 "Likely our final small batch of fixes for 5.2:

   - Some fixes for USB on davinci, regressions were due to the recent
     conversion of the OCHI driver to use GPIO regulators

   - A fixup of kconfig dependencies for a TI irq controller

   - A switch of armada-38x to avoid dropped characters on uart, caused
     by switch of base inherited platform description earlier this year"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: davinci: da830-evm: fix GPIO lookup for OHCI
  ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCI
  ARM: davinci: da830-evm: add missing regulator constraints for OHCI
  soc: ti: fix irq-ti-sci link error
  ARM: dts: armada-xp-98dx3236: Switch to armada-38x-uart serial node

Pull dax fix from Dan Williams:
 "A single dax fix that has been soaking awaiting other fixes under
  discussion to join it. As it is getting late in the cycle lets proceed
  with this fix and save follow-on changes for post-v5.3-rc1.

   - Fix xarray entry association for mixed mappings"

* tag 'dax-fix-5.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix xarray entry association for mixed mappings

Pull do_move_mount() fix from Al Viro:
 "Regression fix"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  vfs: move_mount: reject moving kernel internal mounts

swap_readpage() sets waiter = bio->bi_private even if synchronous = F,
this means that the caller can get the spurious wakeup after return.

This can be fatal if blk_wake_io_task() does
set_current_state(TASK_RUNNING) after the caller does
set_special_state(), in the worst case the kernel can crash in
do_task_dead().

Link: http://lkml.kernel.org/r/20190704160301.GA5956@redhat.com
Fixes: 0619317f ("block: add polled wakeup task helper")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>