Pull ARM SoC platform changes from Arnd Bergmann:
 "New and updated SoC support.  Among the things new for this release
  are:

   - at91: Added support for the new SAMA5D4 SoC, following the earlier
     SAMA5D3
   - bcm: Added support for BCM63XX family of DSL SoCs
   - hisi: Added support for HiP04 server-class SoC
   - meson: Initial support for the Amlogic Meson6 (aka 8726MX) platform
   - shmobile: added support for new r8a7794 (R-Car E2) automotive SoC

  Noteworthy changes to existing SoC support are:

   - imx: convert i.MX1 to device tree
   - omap: lots of power management work
   - omap: base support to enable moving to standard UART driver
   - shmobile: lots of progress for multiplatform support, still
     ongoing"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (171 commits)
  ARM: hisi: depend on ARCH_MULTI_V7
  CNS3xxx: Fix debug UART.
  ARM: at91: fix nommu build regression
  ARM: meson: add basic support for MesonX SoCs
  ARM: meson: debug: add debug UART for earlyprintk support
  irq: Export handle_fasteoi_irq
  ARM: mediatek: Add earlyprintk support for mt6589
  ARM: hisi: Fix platmcpm compilation when ARMv6 is selected
  ARM: debug: fix alphanumerical order on debug uarts
  ARM: at91: document Atmel SMART compatibles
  ARM: at91: add sama5d4 support to sama5_defconfig
  ARM: at91: dt: add device tree file for SAMA5D4ek board
  ARM: at91: dt: add device tree file for SAMA5D4 SoC
  ARM: at91: SAMA5D4 SoC detection code and low level routines
  ARM: at91: introduce basic SAMA5D4 support
  clk: at91: add a driver for the h32mx clock
  ARM: pxa3xx: provide specific platform_devices for all ssp ports
  ARM: pxa: ssp: provide platform_device_id for PXA3xx
  ARM: OMAP4+: Remove static iotable mappings for SRAM
  ARM: OMAP4+: Move SRAM data to DT
  ...

Pull ARM SoC cleanups from Arnd Bergmann:
 "This time around, the cleanup branch contains mostly code removal.  A
  number of board files for at91, imx and msm have become obsolete
  because of the DT conversion and are now ready to be removed.  The
  OMAP platform has traditionally had its own DMA engine abstraction and
  as this is being phased out, a lot of the original code is now unused
  and can be removed as well.

  S3C24xx can be simplified now that the restart code is a proper device
  driver.

  Finally, a number of cleanups in shmobile are done to prepare for the
  addition of new code in other branches"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  ARM: at91: Remove the support for the RSI EWS board
  arm: mach-omap2: Convert pr_warning to pr_warn
  ARM: OMAP: Remove unused pieces of legacy DMA API
  ARM: at91: remove board file for Acme Systems Fox G20
  ARM: orion5x: Convert pr_warning to pr_warn
  ARM: S3C24XX: remove separate restart code
  ARM: EXYNOS: Do not calculate boot address twice
  ARM: sunxi: Remove sun4i reboot code from mach directory
  ARM: imx: Remove mach-mxt_td60 board file
  ARM: shmobile: armadillo800eva legacy: Use rmobile_add_devices_to_domains()
  ARM: shmobile: r8a7740: Clean up pm domain table
  ARM: shmobile: r8a7740: Use rmobile_add_devices_to_domains()
  ARM: shmobile: sh7372: Make domain_devices[] static __initdata
  ARM: shmobile: mackerel: Make domain_devices[] static __initdata
  clocksource: tcb_clksrc: sanitize IRQ request
  ARM: at91/tclib: mask interruptions at shutdown and probe
  ARM: at91/tclib: move initialization from alloc to probe
  ARM: at91/tclib: prefer using of devm_* functions
  ARM: clps711x: Switch CLPS711X subarch to use clk and clocksource driver
  ARM: shmobile: r8a7791 is now called "R-Car M2-W"
  ...

Pull ARM SoC non-critical bug fixes from Arnd Bergmann:
 "These are bug fixes for harmless problems that were not important
  enough to get fixed in 3.17.  The majority of these are OMAP specific,
  but there are also a couple for Marvell mvebu, cns3xxx, and others, as
  well as some updates for the MAINTAINERS file.

  In particular, Robert Jarzmik and Daniel Mack now volunteered to help
  out maintaining the PXA platform, Krzysztof Halasa took over the
  cns3xxx platform, Carlo Caione is the maintainer for the new Amlogic
  meson platform, and Matthias Brugger is now listed for the mediatek
  platform he recently contributed"

* tag 'fixes-nc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  MAINTAINERS: update Shawn's email address
  MAINTAINERS: condense some Tegra related entries
  MAINTAINERS: add Alexandre Courbot for Tegra
  MAINTAINERS: CNS3xxx and IXP4xx update.
  MAINTAINERS: Add maintainers entry for Mediatek SoCs
  arm, vt8500, LLVMLlinux: Use mcr instead of mcr% for mach-vt8500
  MAINTAINERS: add a third maintainer to mach-bcm
  CNS3xxx: Fix PCIe read size limit.
  CNS3xxx: Fix logical PCIe topology.
  CNS3xxx: Fix debug UART.
  MAINTAINERS: Add entry for the Amlogic MesonX SoCs
  MAINTAINERS: update ARM pxa maintainers
  ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks
  ARM: at91: fix at91sam9263ek DT mmc pinmuxing settings
  ARM: mvebu: Netgear RN102: Use Hardware BCH ECC
  ARM: Kirkwood: Fix DT based DSA.
  ARM: OMAP2+: make of_device_ids const
  ARM: omap2: make arrays containing machine compatible strings const
  ARM: LPC32xx: Fix reset function
  ARM: mvebu: Netgear RN2120: Use Hardware BCH ECC
  ...

My Freescale email address will be gone shortly.  Update my email to be
the Linaro one.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

There's little point having specific entries in MAINTAINERS for Tegra
drivers that are already covered by the top-level Tegra architecture
support entry, and maintained by people listed there. Remove the
duplicates.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

I'd like to propose Alexandre Courbot as an additional Tegra maintainer.
He's been working on a variety of Tegra-related code for a while, and
is now officially tasked with working on upstream support.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
--
v2:
* Use Alexandre's full name.
* Use a non-NVIDIA email address to avoid Exchange Server patch corruption.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull f2fs updates from Jaegeuk Kim:
 "This patch-set introduces a couple of new features such as large
  sector size, FITRIM, and atomic/volatile writes.

  Several patches enhance power-off recovery and checkpoint routines.

  The fsck.f2fs starts to support fixing corrupted partitions with
  recovery hints provided by this patch-set.

  Summary:
   - retain some recovery information for fsck.f2fs
   - enhance checkpoint speed
   - enhance flush command management
   - bug fix for lseek
   - tune in-place-update policies
   - enhance roll-forward speed
   - revisit all the roll-forward and fsync rules
   - support larget sector size
   - support FITRIM
   - support atomic and volatile writes

  And several clean-ups and bug fixes are included"

* tag 'f2fs-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits)
  f2fs: support volatile operations for transient data
  f2fs: support atomic writes
  f2fs: remove unused return value
  f2fs: clean up f2fs_ioctl functions
  f2fs: potential shift wrapping buf in f2fs_trim_fs()
  f2fs: call f2fs_unlock_op after error was handled
  f2fs: check the use of macros on block counts and addresses
  f2fs: refactor flush_nat_entries to remove costly reorganizing ops
  f2fs: introduce FITRIM in f2fs_ioctl
  f2fs: introduce cp_control structure
  f2fs: use more free segments until SSR is activated
  f2fs: change the ipu_policy option to enable combinations
  f2fs: fix to search whole dirty segmap when get_victim
  f2fs: fix to clean previous mount option when remount_fs
  f2fs: skip punching hole in special condition
  f2fs: support large sector size
  f2fs: fix to truncate blocks past EOF in ->setattr
  f2fs: update i_size when __allocate_data_block
  f2fs: use MAX_BIO_BLOCKS(sbi)
  f2fs: remove redundant operation during roll-forward recovery
  ...

Pull nfsd updates from Bruce Fields:
 "Highlights:

   - support the NFSv4.2 SEEK operation (allowing clients to support
     SEEK_HOLE/SEEK_DATA), thanks to Anna.
   - end the grace period early in a number of cases, mitigating a
     long-standing annoyance, thanks to Jeff
   - improve SMP scalability, thanks to Trond"

* 'for-3.18' of git://linux-nfs.org/~bfields/linux: (55 commits)
  nfsd: eliminate "to_delegation" define
  NFSD: Implement SEEK
  NFSD: Add generic v4.2 infrastructure
  svcrdma: advertise the correct max payload
  nfsd: introduce nfsd4_callback_ops
  nfsd: split nfsd4_callback initialization and use
  nfsd: introduce a generic nfsd4_cb
  nfsd: remove nfsd4_callback.cb_op
  nfsd: do not clear rpc_resp in nfsd4_cb_done_sequence
  nfsd: fix nfsd4_cb_recall_done error handling
  nfsd4: clarify how grace period ends
  nfsd4: stop grace_time update at end of grace period
  nfsd: skip subsequent UMH "create" operations after the first one for v4.0 clients
  nfsd: set and test NFSD4_CLIENT_STABLE bit to reduce nfsdcltrack upcalls
  nfsd: serialize nfsdcltrack upcalls for a particular client
  nfsd: pass extra info in env vars to upcalls to allow for early grace period end
  nfsd: add a v4_end_grace file to /proc/fs/nfsd
  lockd: add a /proc/fs/lockd/nlm_end_grace file
  nfsd: reject reclaim request when client has already sent RECLAIM_COMPLETE
  nfsd: remove redundant boot_time parm from grace_done client tracking op
  ...

Pull NFS client updates from Trond Myklebust:
 "Highlights include:

  Stable fixes:
   - fix an NFSv4.1 state renewal regression
   - fix open/lock state recovery error handling
   - fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails
   - fix statd when reconnection fails
   - don't wake tasks during connection abort
   - don't start reboot recovery if lease check fails
   - fix duplicate proc entries

  Features:
  - pNFS block driver fixes and clean ups from Christoph
  - More code cleanups from Anna
  - Improve mmap() writeback performance
  - Replace use of PF_TRANS with a more generic mechanism for avoiding
    deadlocks in nfs_release_page"

* tag 'nfs-for-3.18-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (66 commits)
  NFSv4.1: Fix an NFSv4.1 state renewal regression
  NFSv4: fix open/lock state recovery error handling
  NFSv4: Fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails
  NFS: Fabricate fscache server index key correctly
  SUNRPC: Add missing support for RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT
  NFSv3: Fix missing includes of nfs3_fs.h
  NFS/SUNRPC: Remove other deadlock-avoidance mechanisms in nfs_release_page()
  NFS: avoid waiting at all in nfs_release_page when congested.
  NFS: avoid deadlocks with loop-back mounted NFS filesystems.
  MM: export page_wakeup functions
  SCHED: add some "wait..on_bit...timeout()" interfaces.
  NFS: don't use STABLE writes during writeback.
  NFSv4: use exponential retry on NFS4ERR_DELAY for async requests.
  rpc: Add -EPERM processing for xs_udp_send_request()
  rpc: return sent and err from xs_sendpages()
  lockd: Try to reconnect if statd has moved
  SUNRPC: Don't wake tasks during connection abort
  Fixing lease renewal
  nfs: fix duplicate proc entries
  pnfs/blocklayout: Fix a 64-bit division/remainder issue in bl_map_stripe
  ...

Pull char/misc driver updates from Greg KH:
 "Here's the big set of driver patches for char/misc drivers.  Nothing
  major in here, the shortlog goes into the details.  All have been in
  the linux-next tree for a while with no issues"

* tag 'char-misc-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (80 commits)
  mei: mei_txe_fw_sts can be static
  mei: fix kernel-doc warnings
  mei: fix KDoc documentation formatting
  mei: drop me_client_presentation_num
  mei: trivial: fix errors in prints in comments
  mei: remove include to pci header from mei module files
  mei: push pci cfg structure me hw
  mei: remove the reference to pdev from mei_device
  mei: move fw_status back to hw ops handlers
  mei: get rid of most of the pci dependencies in mei
  mei: push all standard settings into mei_device_init
  mei: move mei_hbm_hdr function from hbm.h the hbm.c
  mei: kill error message for allocation failure
  mei: nfc: fix style warning
  mei: fix style warning: Missing a blank line after declarations
  mei: pg: fix cat and paste error in comments
  mei: debugfs: add single buffer indicator
  mei: debugfs: adjust print buffer
  mei: add hbm and pg state in devstate debugfs print
  Drivers: hv: vmbus: Enable interrupt driven flow control
  ...

Pull compression update from Greg KH:
 "More fun with the LZO compression code.  Here's some patches that
  properly document what the logic is, and fix up all of the previously
  reported issues against the LZO code.

  This has been in linux-next for a while with no issues"

* tag 'compress-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  lzo: check for length overrun in variable length encoding.
  Revert "lzo: properly check for overruns"
  Documentation: lzo: document part of the encoding

Merge tag 'driver-core-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core update from Greg KH:
 "Here's the driver core patches for 3.18-rc1.  Just a few small things,
  and the addition of a new interface to dump firmware "core dumps" to
  userspace through sysfs that the wireless and graphic drivers want to
  use.

  All of these have been in linux-next for a while"

* tag 'driver-core-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  dynamic_debug: change __dynamic_<foo>_dbg return types to void
  driver/base/node: remove unnecessary kfree of node struct from unregister_one_node
  devres: Improve devm_kasprintf()/kvasprintf() support
  Documentation: devres: Add missing devm_kstrdup() managed interface
  Documentation: devres: Add missing IRQ functions
  firmware_class: make sure fw requests contain a name
  driver core: Remove kerneldoc from local function
  attribute_container: fix coding style issues
  attribute_container: fix whitespace errors
  drivers/base: Fix length checks in create_syslog_header()/dev_vprintk_emit()
  device coredump: add new device coredump class
  Documentation/sysfs-rules.txt: Add device attribute error code documentation

Pull tty/serial driver updates from Greg KH:
 "Here's the big tty/serial driver patchset for 3.18-rc1.

  Lots of little things in here, some good work from Peter Hurley on the
  tty core, and in lots of drivers.  There are also lots of other driver
  updates in here as well, full details in the changelogs.

  All have been in the linux-next tree for a while"

* tag 'tty-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (99 commits)
  Revert "serial/core: Initialize the console pm state"
  tty: serial: 8250: use 32bit variable for rpm_tx_active
  tty: serial: msm: Add earlycon support
  serial/core: Initialize the console pm state
  serial: asc: Conditionally use readl_relaxed (COMPILE_TEST)
  serial: of-serial: add PM suspend/resume support
  m68k: AMIGA_BUILTIN_SERIAL should depend on TTY
  asm/uapi: Add definition of TIOC[SG]RS485
  tty/metag_da: Add console_poll module parameter
  serial: 8250_pci: remove rts_n override from Baytrail quirk
  serial: cadence: Add generic earlycon support
  serial: imx: change the wait even to interruptiable
  serial: imx: terminate the RX DMA when the UART is suspending
  serial: imx: fix throttle/unthrottle callbacks for hardware assisted flow control
  serial: 8250: Add Quark X1000 to 8250_pci.c
  tty: omap-serial: pull out calculation from baud_is_mode16
  tty: omap-serial: fix division by zero
  xen_hvc: no reason to write the type key on xenstore
  tty: serial: 8250_core: remove UART_IER_RDI in serial8250_stop_rx()
  tty: serial: 8250_core: use the ->line argument as a hint in serial8250_find_match_or_unused()
  ...

Pull staging updates from Greg KH:
 "Here is the big staging patch set for 3.18-rc1.

  Once again, we are deleting more code than we added, with something
  like 150000 lines deleted overall.  Some of this is due to drivers
  being added to the networking tree, so the old versions are removed
  here, but even then, the overall difference is quite good.

  Other than driver deletions, lots and lots and lots of minor cleanups
  all over the place.  Full details are in the changelog"

* tag 'staging-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1481 commits)
  staging: et131x: Remove et131x driver from drivers/staging
  staging: emxx_udc: Use min_t instead of min
  staging: emxx_udc: Fix replace printk(KERN_DEBUG ..) with dev_dbg
  staging: media: Fixed else after return or break warning
  staging: media: omap4iss: Fixed else after return or break warning
  staging: rtl8712: Fixed else not required after return
  staging: rtl8712: Fix missing blank line warning
  staging: rtl8192e: rtl8192e: Remove spaces before the semicolons
  staging: rtl8192e: rtl8192e: Remove unnecessary return statements
  staging: rtl8192e: Remove unneeded void return
  staging: rtl8192e: Fix void function return statements style
  staging: rtl8712: Fix unnecessary parentheses style warning
  staging: rtl8192e: Fix unnecessary space before function pointer arguments
  staging: rtl8192e: Array was made static const char * const
  staging: ft1000: ft1000-usb: Removed unnecessary else statement.
  staging: ft1000: ft1000-usb: Removed unnecessary else statement.
  staging: ft1000: ft1000-usb: Removed unnecessary parentheses.
  staging: ft1000: ft1000-usb: Added new line after declarations.
  staging: vt6655: Fixed C99 // comment errors in wpactl.c
  staging: speakup: Fixed warning <linux/serial.h> instead of <asm/serial.h>
  ...

Pull USB updates from Greg KH:
 "Here's the big USB patchset for 3.18-rc1.  Also in here is the PHY
  tree, as it seems to fit well with the USB tree for various reasons...

  Anyway, lots of little changes in here, all over the place, full
  details in the changelog

  All have been in the linux-next tree for a while with no issues"

* tag 'usb-3.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (244 commits)
  USB: host: st: fix typo 'CONFIG_USB_EHCI_HCD_ST'
  uas: Reduce number of function arguments for uas_alloc_foo functions
  xhci: Allow xHCI drivers to be built as separate modules
  xhci: Export symbols used by host-controller drivers
  xhci: Check for XHCI_COMP_MODE_QUIRK when disabling D3cold
  xhci: Introduce xhci_init_driver()
  usb: hcd: add generic PHY support
  usb: rename phy to usb_phy in HCD
  usb: gadget: uvc: fix up uvcg_v4l2_get_unmapped_area typo
  USB: host: st: fix ehci/ohci driver selection
  usb: host: ehci-exynos: Remove unnecessary usb-phy support
  usb: core: return -ENOTSUPP for all targeted hosts
  USB: Remove .owner field for driver
  usb: core: log higher level message on malformed LANGID descriptor
  usb: Add LED triggers for USB activity
  usb: Rename usb-common.c
  usb: gadget: Refactor request completion
  usb: gadget: Introduce usb_gadget_giveback_request()
  usb: dwc2/gadget: move phy bus legth initialization
  phy: remove .owner field for drivers using module_platform_driver
  ...

Pull crypto update from Herbert Xu:
 - add multibuffer infrastructure (single_task_running scheduler helper,
   OKed by Peter on lkml.
 - add SHA1 multibuffer implementation for AVX2.
 - reenable "by8" AVX CTR optimisation after fixing counter overflow.
 - add APM X-Gene SoC RNG support.
 - SHA256/SHA512 now handles unaligned input correctly.
 - set lz4 decompressed length correctly.
 - fix algif socket buffer allocation failure for 64K page machines.
 - misc fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (47 commits)
  crypto: sha - Handle unaligned input data in generic sha256 and sha512.
  Revert "crypto: aesni - disable "by8" AVX CTR optimization"
  crypto: aesni - remove unused defines in "by8" variant
  crypto: aesni - fix counter overflow handling in "by8" variant
  hwrng: printk replacement
  crypto: qat - Removed unneeded partial state
  crypto: qat - Fix typo in name of tasklet_struct
  crypto: caam - Dynamic allocation of addresses for various memory blocks in CAAM.
  crypto: mcryptd - Fix typos in CRYPTO_MCRYPTD description
  crypto: algif - avoid excessive use of socket buffer in skcipher
  arm64: dts: add random number generator dts node to APM X-Gene platform.
  Documentation: rng: Add X-Gene SoC RNG driver documentation
  hwrng: xgene - add support for APM X-Gene SoC RNG support
  crypto: mv_cesa - Add missing #define
  crypto: testmgr - add test for lz4 and lz4hc
  crypto: lz4,lz4hc - fix decompression
  crypto: qat - Use pci_enable_msix_exact() instead of pci_enable_msix()
  crypto: drbg - fix maximum value checks on 32 bit systems
  crypto: drbg - fix sparse warning for cpu_to_be[32|64]
  crypto: sha-mb - sha1_mb_alg_state can be static
  ...

Pull m68k updates from Geert Uytterhoeven:
 "Summary:
  - a fix for an intermittent crash in macsonic and hilkbd, marked for
    stable,
  - build fixes for uncommon configs.

  Note: "m68k: AMIGA_BUILTIN_SERIAL should depend on TTY" was also
  picked up by GregKH for his TTY/Serial patches tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Reformat arch/m68k/mm/hwtest.c
  m68k: Disable/restore interrupts in hwreg_present()/hwreg_write()
  m68k: AMIGA_BUILTIN_SERIAL should depend on TTY
  m68k: Add missing ioport_unmap()
  m68k/atari - stram: Add missing #include <linux/ioport.h>

Pull S+core updates from Lennox Wu:
 "Three of the patches are for building allmodconfig, and the others are
  for removing useless flags"

* tag 'for-linus-20141006' of git://github.com/sctscore/linux-off:
  score: Remove GENERIC_HAS_IOMAP
  arch/score/include/asm/Kbuild: Add generic "serial.h"
  score: remove deprecated IRQF_DISABLED
  arch/score/mm/cache.c: Export 'flush_icache_range'
  arch: score: Export necessary symbols in related files

Pull arch/tile updates from Chris Metcalf:
 "The only substantive pieces in this batch are some more vDSO support,
  and removing the reference to &platform_bus in tile-srom.c.

  The rest are minor issues reported to me"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: add clock_gettime support to vDSO
  tile: switch to using seqlocks for the vDSO time code
  tile gxio: use better string copy primitive
  char: tile-srom: Add real platform bus parent
  Removed repeated word in comments
  tilegx: Enable ARCH_SUPPORTS_ATOMIC_RMW
  tile: Remove tile-specific _sinitdata and _einitdata
  tile: use ARRAY_SIZE

Pull arm64 updates from Catalin Marinas:
 - eBPF JIT compiler for arm64
 - CPU suspend backend for PSCI (firmware interface) with standard idle
   states defined in DT (generic idle driver to be merged via a
   different tree)
 - Support for CONFIG_DEBUG_SET_MODULE_RONX
 - Support for unmapped cpu-release-addr (outside kernel linear mapping)
 - set_arch_dma_coherent_ops() implemented and bus notifiers removed
 - EFI_STUB improvements when base of DRAM is occupied
 - Typos in KGDB macros
 - Clean-up to (partially) allow kernel building with LLVM
 - Other clean-ups (extern keyword, phys_addr_t usage)

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (51 commits)
  arm64: Remove unneeded extern keyword
  ARM64: make of_device_ids const
  arm64: Use phys_addr_t type for physical address
  aarch64: filter $x from kallsyms
  arm64: Use DMA_ERROR_CODE to denote failed allocation
  arm64: Fix typos in KGDB macros
  arm64: insn: Add return statements after BUG_ON()
  arm64: debug: don't re-enable debug exceptions on return from el1_dbg
  Revert "arm64: dmi: Add SMBIOS/DMI support"
  arm64: Implement set_arch_dma_coherent_ops() to replace bus notifiers
  of: amba: use of_dma_configure for AMBA devices
  arm64: dmi: Add SMBIOS/DMI support
  arm64: Correct ftrace calls to aarch64_insn_gen_branch_imm()
  arm64:mm: initialize max_mapnr using function set_max_mapnr
  setup: Move unmask of async interrupts after possible earlycon setup
  arm64: LLVMLinux: Fix inline arm64 assembly for use with clang
  arm64: pageattr: Correctly adjust unaligned start addresses
  net: bpf: arm64: fix module memory leak when JIT image build fails
  arm64: add PSCI CPU_SUSPEND based cpu_suspend support
  arm64: kernel: introduce cpu_init_idle CPU operation
  ...

Pull ARM updates from Russell King:
 "Included in these updates are:
   - Performance optimisation to avoid writing the control register at
     every exception.
   - Use static inline instead of extern inline in ftrace code.
   - Crypto ARM assembly updates for big endian
   - Alignment of initrd/.init memory to page sizes when freeing to
     ensure that we fully free the regions
   - Add gcov support
   - A couple of preparatory patches for VDSO support: use
     _install_special_mapping, and randomize the sigpage placement above
     stack.
   - Add L2 ePAPR DT cache properties so that DT can specify the cache
     geometry.
   - Preparatory patch for FIQ (NMI) kernel C code for things like
     spinlock lockup debug.  Following on from this are a couple of my
     patches cleaning up show_regs() and removing an unused (probably
     since 1.x days) do_unexp_fiq() function.
   - Use pr_warn() rather than pr_warning().
   - A number of cleanups (smp, footbridge, return_address)"

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (21 commits)
  ARM: 8167/1: extend the reserved memory for initrd to be page aligned
  ARM: 8168/1: extend __init_end to a page align address
  ARM: 8169/1: l2c: parse cache properties from ePAPR definitions
  ARM: 8160/1: drop warning about return_address not using unwind tables
  ARM: 8161/1: footbridge: select machine dir based on ARCH_FOOTBRIDGE
  ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
  ARM: 8155/1: place sigpage at a random offset above stack
  ARM: 8154/1: use _install_special_mapping for sigpage
  ARM: 8153/1: Enable gcov support on the ARM architecture
  ARM: Avoid writing to control register on every exception
  ARM: 8152/1: Convert pr_warning to pr_warn
  ARM: remove unused do_unexp_fiq() function
  ARM: remove extraneous newline in show_regs()
  ARM: 8150/3: fiq: Replace default FIQ handler
  ARM: 8140/1: ep93xx: Enable DEBUG_LL_UART_PL01X
  ARM: 8139/1: versatile: Enable DEBUG_LL_UART_PL01X
  ARM: 8138/1: drop ISAR0 workaround for B15
  ARM: 8136/1: sa1100: add Micro ASIC platform device
  ARM: 8131/1: arm/smp: Absorb boot_secondary()
  ARM: 8126/1: crypto: enable NEON SHA-384/SHA-512 for big endian
  ...

Pull KVM updates from Paolo Bonzini:
 "Fixes and features for 3.18.

  Apart from the usual cleanups, here is the summary of new features:

   - s390 moves closer towards host large page support

   - PowerPC has improved support for debugging (both inside the guest
     and via gdbstub) and support for e6500 processors

   - ARM/ARM64 support read-only memory (which is necessary to put
     firmware in emulated NOR flash)

   - x86 has the usual emulator fixes and nested virtualization
     improvements (including improved Windows support on Intel and
     Jailhouse hypervisor support on AMD), adaptive PLE which helps
     overcommitting of huge guests.  Also included are some patches that
     make KVM more friendly to memory hot-unplug, and fixes for rare
     caching bugs.

  Two patches have trivial mm/ parts that were acked by Rik and Andrew.

  Note: I will soon switch to a subkey for signing purposes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (157 commits)
  kvm: do not handle APIC access page if in-kernel irqchip is not in use
  KVM: s390: count vcpu wakeups in stat.halt_wakeup
  KVM: s390/facilities: allow TOD-CLOCK steering facility bit
  KVM: PPC: BOOK3S: HV: CMA: Reserve cma region only in hypervisor mode
  arm/arm64: KVM: Report correct FSC for unsupported fault types
  arm/arm64: KVM: Fix VTTBR_BADDR_MASK and pgd alloc
  kvm: Fix kvm_get_page_retry_io __gup retval check
  arm/arm64: KVM: Fix set_clear_sgi_pend_reg offset
  kvm: x86: Unpin and remove kvm_arch->apic_access_page
  kvm: vmx: Implement set_apic_access_page_addr
  kvm: x86: Add request bit to reload APIC access page address
  kvm: Add arch specific mmu notifier for page invalidation
  kvm: Rename make_all_cpus_request() to kvm_make_all_cpus_request() and make it non-static
  kvm: Fix page ageing bugs
  kvm/x86/mmu: Pass gfn and level to rmapp callback.
  x86: kvm: use alternatives for VMCALL vs. VMMCALL if kernel text is read-only
  kvm: x86: use macros to compute bank MSRs
  KVM: x86: Remove debug assertion of non-PAE reserved bits
  kvm: don't take vcpu mutex for obviously invalid vcpu ioctls
  kvm: Faults which trigger IO release the mmap_sem
  ...

Commit 7bced397 ("net_dma: simple removal") removed the long-dead
net_dma code, but unintentionally broke the build for the qualcomm
crypto engine (qce) that had accidentally depended on the inclusion of
<linux/dmaengine.h> through the networking header files that used to
have it.

Add the required dmaengine.h include explicitly to fix the breakage.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SCSI updates from James Bottomley:
 "This patch set consists of the usual driver updates (megaraid_sas,
  arcmsr, be2iscsi, lpfc, mpt2sas, mpt3sas, qla2xxx, ufs) plus several
  assorted fixes and miscellaneous updates (including the
  pci_msix_enable_range() changes that have been pending for a while)"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (202 commits)
  scsi: add a CONFIG_SCSI_MQ_DEFAULT option
  ufs: definitions for phy interface
  ufs: tune bkops while power managment events
  ufs: Add support for clock scaling using devfreq framework
  ufs: Add freq-table-hz property for UFS device
  ufs: Add support for clock gating
  ufs: refactor configuring power mode
  ufs: add UFS power management support
  ufs: introduce well known logical unit in ufs
  ufs: manually add well known logical units
  ufs: Active Power Mode - configuring bActiveICCLevel
  ufs: improve init sequence
  ufs: refactor query descriptor API support
  ufs: add voting support for host controller power
  ufs: Add clock initialization support
  ufs: Add regulator enable support
  ufs: Allow vendor specific initialization
  scsi: don't add scsi_device if its already visible
  scsi: fix the type for well known LUs
  scsi: fix comment in struct Scsi_Host definition
  ...

Pull input updates from Dmitry Torokhov:
 "A few new haptic/button drivers, a rudimentary support for laptops
  using FocalTech touchpads; xpad driver will bind to more devices, and
  a few other driver fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: soc_button_array - convert to platform bus
  Input: palmas-pwrbutton - fix typo in the license string
  Input: palmas-pwrbutton - use IRQF_ONESHOT
  Input: psmouse - add support for detecting FocalTech PS/2 touchpads
  Input: psmouse - add psmouse_matches_pnp_id helper function
  Input: joystick - use ktime for measuring timing
  Input: add haptic driver on max77693
  Input: introduce palmas-pwrbutton
  Input: add support for the DRV2667 haptic driver
  Input: xpad - sync device IDs with xboxdrv
  Input: xpad - add VID/PID for Razer Sabertooth
  Input: cros_ec_keyb - optimize ghosting algorithm
  Input: drv260x - fix binding document
  Input: drv260x - add check for ERM mode and LRA Libraries
  Input: drv260x - remove unused defines
  Input: drv260x - add TI drv260x haptics driver

Pull HID updates from Jiri Kosina:

 - quirk for devices that need to be pulled in much more aggresive way
   than mandated, by Johan Hovold

 - robustification of sanity checking of incoming reports in RMI driver,
   by Benjamin Tissoires

 - fixes, updates, and new HW support to SONY driver, by Frank Praznik

 - port of uHID to the new transport layer layout, by David Herrmann

 - robustification of Clear-Halt/reset in USB HID, by Alan Stern

 - native support for hopefully any future HID compliant wacom tablet.
   Those found on the various laptops (ISDv4/5) already are HID
   compliant and they should work in the future without any modification
   of the kernel.  Written by Benjamin Tissoires.

 - a lot more simple fixes and device ID additions all over the place

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (45 commits)
  HID: uHID: fix excepted report type
  HID: usbhid: add another mouse that needs QUIRK_ALWAYS_POLL
  HID: wacom: implement the finger part of the HID generic handling
  HID: wacom: implement generic HID handling for pen generic devices
  HID: wacom: move allocation of inputs earlier
  HID: wacom: split out input allocation and registration
  HID: wacom: rename failN with some meaningful information
  HID: sony: Update the DualShock 4 touchpad resolution
  HID: wacom: fix timeout on probe for some wacoms
  HID: sony: Set touchpad bits in the input_configured callback
  HID: sony: Update file header and correct comments
  HID: sony: Corrections for the DualShock 4 HID descriptor
  HID: rmi: check sanity of the incoming report
  HID: wacom: make the WL connection friendly for the desktop
  HID: wacom - enable LED support for Wireless Intuos5/Pro
  HID: wacom - remove report_id from wacom_get_report interface
  HID: wacom - Clean up of sysfs
  HID: wacom - Add default permission defines for sysfs attributes
  HID: usbhid: fix PIXART optical mouse
  HID: Add Holtek USB ID 04d9:a0c2 ETEKCITY Scroll
  ...

Pull "trivial tree" updates from Jiri Kosina:
 "Usual pile from trivial tree everyone is so eagerly waiting for"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  Remove MN10300_PROC_MN2WS0038
  mei: fix comments
  treewide: Fix typos in Kconfig
  kprobes: update jprobe_example.c for do_fork() change
  Documentation: change "&" to "and" in Documentation/applying-patches.txt
  Documentation: remove obsolete pcmcia-cs from Changes
  Documentation: update links in Changes
  Documentation: Docbook: Fix generated DocBook/kernel-api.xml
  score: Remove GENERIC_HAS_IOMAP
  gpio: fix 'CONFIG_GPIO_IRQCHIP' comments
  tty: doc: Fix grammar in serial/tty
  dma-debug: modify check_for_stack output
  treewide: fix errors in printk
  genirq: fix reference in devm_request_threaded_irq comment
  treewide: fix synchronize_rcu() in comments
  checkstack.pl: port to AArch64
  doc: queue-sysfs: minor fixes
  init/do_mounts: better syntax description
  MIPS: fix comment spelling
  powerpc/simpleboot: fix comment
  ...

Pull documentation updates from Jiri Kosina:
 "Updates to kernel documentation.

  I took this over (hopefully temporarily) from Randy who was not
  willing to maintain it any longer.  This pile mostly is a relay of
  queue that Randy already had in his tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/doc:
  Documentation: fix broken v4l-utils URL
  Documentation: update include path for mpssd
  Documentation: correct parameter error for dma_mapping_error
  MAINTAINERS: update location of linux-doc tree
  Documentation: remove networking/.gitignore
  tools: add more endian.h macros
  Make Documenation depend on headers_install
  Docs: this_cpu_ops: remove redundant add forms
  Documentation: disable vdso_test to avoid breakage with old glibc
  Documentation: update vDSO makefile to build portable examples
  Documentation: update .gitignore files
  Documentation: support glibc versions without htole macros
  v4l2-pci-skeleton: Only build if PCI is available
  Documentation: fix misc. warnings
  Documentation: make functions static to avoid prototype warnings
  Documentation: add makefiles for more targets
  Documentation: use subdir-y to avoid unnecessary built-in.o files

Pull spi updates from Mark Brown:
 "A quiet release for SPI, mainly driver updates and not too many of
  them:

   - Support for dummy transfers (for delays on startup) in drivers
     using transfer_one().
   - Lots of enhancements to the Designware driver to support new Intel
     SoCs.
   - Support for newer Renesas chips.
   - DMA support for the i.MX driver.
   - One new driver for Broadcom BCM53xx chips"

* tag 'spi-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits)
  spi: spi-mxs: fix a tiny typo in a comment
  spi: dw-mid: follow new DMAengine workflow
  spi: dw-mid: convert to use DMAengine wrappers
  spi: dw-mid: change magic numbers to the constants
  spi: orion: support armada extended baud rates
  spi: fsl: Sort include headers alphabetically
  spi: bcm53xx: Add missing module information
  spi: bcm53xx: Fix module dependency
  spi/rockchip: fix bug that cause the failure to read data in DMA mode
  spi: fsl-dspi: Remove probe info message
  spi: pl022: Add support for chip select extension
  spi: Fix possible ZERO_SIZE_PTR pointer dereferencing error.
  spi: dw: fix style of code in few places
  spi: dw: introduce support of loopback mode
  spi: dw-mid: terminate ongoing transfers at exit
  spi: dw-mid: respect 8 bit mode
  spi: clps711x: Migrate to the new clk subsystem
  spi: pl022: Add missing error check for devm_kzalloc
  spi: spi-imx: add DMA support
  spi: davinci: add support for adding delay between word's transmissions
  ...

Pull regulator updates from Mark Brown:
 "This time around most of the changes are a lot of new drivers along
  with the standard set of fixes and cleanups (thanks again largely to
  Axel Lin).  We do have one nice new feature in the core which factors
  out the disappointingly tricky code around DT parsing, only a couple
  of drivers have been converted so far:

   - Factor out the code for parsing the standard bindings for a set of
     regulators out of DT, making the probe part of a lot of drivers
     simplier.
   - New drivers for Dialog DA9213, HiSilicon HI6420, Intersil
     ISL9305/H, Ricoh RN5T618, Rockchip RK808, Skyworks SKY81452,
     Silergy SYR82x, and Qualcomm RPM"

* tag 'regulator-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (71 commits)
  regulator: da9211: Fix a bug in update of mask bit
  regulator: pwm-regulator: add devicetree bindings for pwm regulator
  regulator: pwm-regulator: get voltage and duty table from dts
  regulator: qcom_rpm: Fix FORCE_MODE_IS_2_BITS macro
  regulator: qcom_rpm: Don't explicitly initialise the first field of config
  regulator: ltc3589: fix broken voltage transitions
  regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
  regulator: axp20x: Use parent device as regulator configuration device
  regulator: fan53555: Fix null pointer dereference
  regulator: fan53555: Fixup report wrong vendor message
  regulator: fan53555: fix wrong cast in probe
  regulator: fan53555: add support for Silergy SYR82x regulators
  regulator: fan53555: add devicetree support
  regulator: add devicetree bindings for Fairchild FAN53555 regulators
  regulator: rk808: Add function for ramp delay for buck1/buck2
  regulator: fan53555: use set_ramp_delay to set the ramp up slew rate
  regulator: fan53555: enable vin supply
  regulator: rk808: Fix missing of_node_put
  regulator: rk808: Remove unused variables
  regulator: of: Add stub OF match function for !OF case
  ...

Pull regmap updates from Mark Brown:
 "The main update this time around is the addition of a standard DT
  binding for specifying the endianness of devices.  This allows drivers
  to support any endianness of device register map without any code,
  useful for configurable IP blocks.

  There's also a few bug fixes that I didn't get round to sending, none
  of them terribly severe or new, and a reduction in size for struct
  regmap"

* tag 'regmap-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix debugfs-file 'registers' mode
  regmap: fix possible ZERO_SIZE_PTR pointer dereferencing error.
  regmap: debugfs: fix possbile NULL pointer dereference
  regmap: fix NULL pointer dereference in _regmap_write/read
  regmap: fix NULL pointer dereference in regmap_get_val_endian
  regmap: cache: Do not fail silently from regcache_sync calls
  regmap: change struct regmap's internal locks as union
  regmap: Split regmap_get_endian() in two functions
  regmap: of_regmap_get_endian() cleanup
  regmap: Fix DT endianess parsing logic
  regmap: Add explicit dependencies to catch "select" misuse
  regmap: Restore L: linux-kernel@vger.kernel.org entry
  regmap: Add the DT binding documentation for endianness
  regmap: add DT endianness binding support.

Pull pin control changes from Linus Walleij:
 "This is the bulk of pin control changes for the v3.18 development
  series:

   - New drivers for the Freescale i.MX21, Qualcomm APQ8084 pin
     controllers.

   - Incremental new features on the Rockchip, atlas 6, OMAP, AM437x,
     APQ8064, prima2, AT91, Tegra, i.MX, Berlin and Nomadik.

   - Push Freescale drivers down into their own subdirectory.

   - Assorted sprays of syntax and semantic fixes"

* tag 'pinctrl-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: specify bindings for pins and groups
  pinctrl: nomadik: improve GPIO debug prints
  pinctrl: abx500: refactor DT parser to take two paths
  pinctrl: abx500: use helpers for map allocation/free
  pinctrl: alter device tree bindings for functions
  pinctrl: nomadik: refactor DT parser to take two paths
  pinctrl: nomadik: use utils map free function
  pinctrl: nomadik: use util function to reserve maps
  pinctrl: qcom: use restart_notifier mechanism for ps_hold
  pinctrl: sh-pfc: sh73a0: Remove unnecessary SoC data allocation
  pinctrl: berlin: fix the dt_free_map function
  pinctrl: at91: disable PD or PU before enabling PU or PD
  pinctrl: st: remove gpiochip in failure cases
  pinctrl: at91: Fix error handling while doing gpiochio_irqchip_add
  pinctrl: at91: Fix failure path in at91_gpio_probe path
  pinctrl: lantiq: Release gpiochip resources in fail case
  pinctrl: imx: detect uninitialized pins
  pinctrl: tegra: Add MIPI pad control
  pinctrl: at91: Switch to using managed clk_get
  pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges
  ...

Pull EDAC fixes from Borislav Petkov:
 "Misc small fixes/improvements accumulated from the summer months,
  nothing earth-shattering.

  The mpc85xx_edac fix is tagged for stable but since it got confirmed
  only days before the final 3.17 release, I didn't rush a last minute
  pull request to you.  I hope that's ok as it will trickle down to
  stable anyway and we'll make sure it lands in 3.17-stable too"

* tag 'edac_for_3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  mpc85xx_edac: Make L2 interrupt shared too
  amd64_edac: Modify usage of amd64_read_dct_pci_cfg()
  ppc4xx_edac: Fix build error caused by wrong member access
  EDAC: Fix mem_types strings type

Pull dmaengine updates from Dan Williams:
 "Even though this has fixes marked for -stable, given the size and the
  needed conflict resolutions this is 3.18-rc1/merge-window material.

  These patches have been languishing in my tree for a long while.  The
  fact that I do not have the time to do proper/prompt maintenance of
  this tree is a primary factor in the decision to step down as
  dmaengine maintainer.  That and the fact that the bulk of drivers/dma/
  activity is going through Vinod these days.

  The net_dma removal has not been in -next.  It has developed simple
  conflicts against mainline and net-next (for-3.18).

  Continuing thanks to Vinod for staying on top of drivers/dma/.

  Summary:

   1/ Step down as dmaengine maintainer see commit 08223d80
      "dmaengine maintainer update"

   2/ Removal of net_dma, as it has been marked 'broken' since 3.13
      (commit 77873803 "net_dma: mark broken"), without reports of
      performance regression.

   3/ Miscellaneous fixes"

* tag 'dmaengine-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine:
  net: make tcp_cleanup_rbuf private
  net_dma: revert 'copied_early'
  net_dma: simple removal
  dmaengine maintainer update
  dmatest: prevent memory leakage on error path in thread
  ioat: Use time_before_jiffies()
  dmaengine: fix xor sources continuation
  dma: mv_xor: Rename __mv_xor_slot_cleanup() to mv_xor_slot_cleanup()
  dma: mv_xor: Remove all callers of mv_xor_slot_cleanup()
  dma: mv_xor: Remove unneeded mv_xor_clean_completed_slots() call
  ioat: Use pci_enable_msix_exact() instead of pci_enable_msix()
  drivers: dma: Include appropriate header file in dca.c
  drivers: dma: Mark functions as static in dma_v3.c
  dma: mv_xor: Add DMA API error checks
  ioat/dca: Use dev_is_pci() to check whether it is pci device

Pull module update from Rusty Russell:
 "Nothing major: support for compressing modules, and auto-tainting
  params.

  PS. My virtio-next tree is empty: DaveM took the patches I had.  There
      might be a virtio-rng starvation fix, but so far it's a bit voodoo
      so I will get to that in the next two days or it will wait"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  moduleparam: Resolve missing-field-initializer warning
  kbuild: handle module compression while running 'make modules_install'.
  modinst: wrap long lines in order to enhance cmd_modules_install
  modsign: lookup lines ending in .ko in .mod files
  modpost: simplify file name generation of *.mod.c files
  modpost: reduce visibility of symbols and constify r/o arrays
  param: check for tainting before calling set op.
  drm/i915: taint the kernel if unsafe module parameters are set
  module: add module_param_unsafe and module_param_named_unsafe
  module: make it possible to have unsafe, tainting module params
  module: rename KERNEL_PARAM_FL_NOARG to avoid confusion

This patch adds support for volatile writes which keep data pages in memory
until f2fs_evict_inode is called by iput.

For instance, we can use this feature for the sqlite database as follows.
While supporting atomic writes for main database file, we can keep its journal
data temporarily in the page cache by the following sequence.

1. open
 -> ioctl(F2FS_IOC_START_VOLATILE_WRITE);
2. writes
 : keep all the data in the page cache.
3. flush to the database file with atomic writes
  a. ioctl(F2FS_IOC_START_ATOMIC_WRITE);
  b. writes
  c. ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
4. close
 -> drop the cached data
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>

Merge ipmi patches from Corey Minyard:
 "These have been in linux-next for a while, ready for 3.18"

* emailed patches from Corey Minyard <minyard@acm.org>:
  ipmi: Clear drvdata when interface is removed
  ipmi: work around gcc-4.9 build warning
  ipmi/of: Don't use unavailable interfaces
  ipmi: Clean up the error handling for channel config errors

This patch fixes a bug on hotmod removing.

After ipmi interface is removed using hotmod, kernel panic occurs when
rmmod impi_si.  For example, try this:

 # echo "remove,"`cat /proc/ipmi/0/params` > \
 /sys/module/ipmi_si/parameters/hotmod
 # rmmod ipmi_si

Then, rmmod fails with the following messages.

  ------------[ cut here ]------------
  WARNING: CPU: 12 PID: 10819 at /mnt/repos/linux/lib/list_debug.c:53 __list_del_entry+0x63/0xd0()
  CPU: 12 PID: 10819 Comm: rmmod Not tainted 3.17.0-rc1 #19
  Hardware name: FUJITSU-SV PRIMERGY BX920 S2/D3030, BIOS 080015 Rev.3D81.3030 02/10/2012
  Call Trace:
    dump_stack+0x45/0x56
    warn_slowpath_common+0x7d/0xa0
    warn_slowpath_fmt+0x4c/0x50
    __list_del_entry+0x63/0xd0
    list_del+0xd/0x30
    cleanup_one_si+0x2a/0x230 [ipmi_si]
    ipmi_pnp_remove+0x15/0x20 [ipmi_si]
    pnp_device_remove+0x24/0x40
    __device_release_driver+0x7f/0xf0
    driver_detach+0xb0/0xc0
    bus_remove_driver+0x55/0xd0
    driver_unregister+0x2c/0x50
    pnp_unregister_driver+0x12/0x20
    cleanup_ipmi_si+0xbc/0xf0 [ipmi_si]
    SyS_delete_module+0x132/0x1c0
    system_call_fastpath+0x16/0x1b
  ---[ end trace 70b4377268f85c23 ]---

list_del in cleanup_one_si() fails because the smi_info is already
removed when hotmod removing.

When ipmi interface is removed by hotmod, smi_info is removed by
cleanup_one_si(), but is is still set in drvdata.  Therefore when rmmod
ipmi_si, ipmi_pnp_remove tries to remove it again and fails.

By this patch, a pointer to smi_info in drvdata is cleared when hotmod
removing so that it will be not accessed when rmmod.

changelog:
v2:
- Clear drvdata in cleanup_one_si
- Change subject

v1:
https://lkml.org/lkml/2014/9/8/741Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Building ipmi on arm with gcc-4.9 results in this warning for an
allmodconfig build:

  drivers/char/ipmi/ipmi_si_intf.c: In function 'ipmi_thread':
  include/linux/time.h:28:5: warning: 'busy_until.tv_sec' may be used uninitialized in this function [-Wmaybe-uninitialized]
    if (lhs->tv_sec > rhs->tv_sec)
       ^
  drivers/char/ipmi/ipmi_si_intf.c:1007:18: note: 'busy_until.tv_sec' was declared here
    struct timespec busy_until;
                    ^

The warning is bogus and this case can not occur.  Apparently this is a
false positive resulting from gcc getting a little smarter about
tracking assignments but not smart enough.

Marking the ipmi_thread_busy_wait function as inline gives the gcc
optimization logic enough information to figure out for itself that the
case cannot happen, which gets rid of the warning without adding any
fake initialization.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>