COMPACT_PARTIAL has historically meant that compaction returned after
doing some work without fully compacting a zone.  It however didn't
distinguish if compaction terminated because it succeeded in creating
the requested high-order page.  This has changed recently and now we
only return COMPACT_PARTIAL when compaction thinks it succeeded, or the
high-order watermark check in compaction_suitable() passes and no
compaction needs to be done.

So at this point we can make the return value clearer by renaming it to
COMPACT_SUCCESS.  The next patch will remove some redundant tests for
success where compaction just returned COMPACT_SUCCESS.

Link: http://lkml.kernel.org/r/20160810091226.6709-4-vbabka@suse.czSigned-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since kswapd compaction moved to kcompactd, compact_pgdat() is not
called anymore, so we remove it.  The only caller of __compact_pgdat()
is compact_node(), so we merge them and remove code that was only
reachable from kswapd.

Link: http://lkml.kernel.org/r/20160810091226.6709-3-vbabka@suse.czSigned-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Patch series "make direct compaction more deterministic")

This is mostly a followup to Michal's oom detection rework, which
highlighted the need for direct compaction to provide better feedback in
reclaim/compaction loop, so that it can reliably recognize when
compaction cannot make further progress, and allocation should invoke
OOM killer or fail.  We've discussed this at LSF/MM [1] where I proposed
expanding the async/sync migration mode used in compaction to more
general "priorities".  This patchset adds one new priority that just
overrides all the heuristics and makes compaction fully scan all zones.
I don't currently think that we need more fine-grained priorities, but
we'll see.  Other than that there's some smaller fixes and cleanups,
mainly related to the THP-specific hacks.

I've tested this with stress-highalloc in GFP_KERNEL order-4 and
THP-like order-9 scenarios.  There's some improvement for compaction
stats for the order-4, which is likely due to the better watermarks
handling.  In the previous version I reported mostly noise wrt
compaction stats, and decreased direct reclaim - now the reclaim is
without difference.  I believe this is due to the less aggressive
compaction priority increase in patch 6.

"before" is a mmotm tree prior to 4.7 release plus the first part of the
series that was sent and merged separately

                                    before        after
order-4:

Compaction stalls                    27216       30759
Compaction success                   19598       25475
Compaction failures                   7617        5283
Page migrate success                370510      464919
Page migrate failure                 25712       27987
Compaction pages isolated           849601     1041581
Compaction migrate scanned       143146541   101084990
Compaction free scanned          208355124   144863510
Compaction cost                       1403        1210

order-9:

Compaction stalls                     7311        7401
Compaction success                    1634        1683
Compaction failures                   5677        5718
Page migrate success                194657      183988
Page migrate failure                  4753        4170
Compaction pages isolated           498790      456130
Compaction migrate scanned          565371      524174
Compaction free scanned            4230296     4250744
Compaction cost                        215         203

[1] https://lwn.net/Articles/684611/

This patch (of 11):

A recent patch has added whole_zone flag that compaction sets when
scanning starts from the zone boundary, in order to report that zone has
been fully scanned in one attempt.  For allocations that want to try
really hard or cannot fail, we will want to introduce a mode where
scanning whole zone is guaranteed regardless of the cached positions.

This patch reuses the whole_zone flag in a way that if it's already
passed true to compaction, the cached scanner positions are ignored.
Employing this flag during reclaim/compaction loop will be done in the
next patch.  This patch however converts compaction invoked from
userspace via procfs to use this flag.  Before this patch, the cached
positions were first reset to zone boundaries and then read back from
struct zone, so there was a window where a parallel compaction could
replace the reset values, making the manual compaction less effective.
Using the flag instead of performing reset is more robust.

[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20160810091226.6709-2-vbabka@suse.czSigned-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Attempt to demystify the task_will_free_mem() loop.

Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Link: http://lkml.kernel.org/r/1c5ddb1c171dbdfc3262252769d6138a29b35b70.1470219853.git.vdavydov@virtuozzo.comSigned-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It causes double align requirement for __get_vm_area_node() if parameter
size is power of 2 and VM_IOREMAP is set in parameter flags, for example
size=0x10000 -> fls_long(0x10000)=17 -> align=0x20000

get_count_order_long() is implemented and can be used instead of
fls_long() for fixing the bug, for example size=0x10000 ->
get_count_order_long(0x10000)=16 -> align=0x10000

[akpm@linux-foundation.org: s/get_order_long()/get_count_order_long()/]
[zijun_hu@zoho.com: fixes]
 Link: http://lkml.kernel.org/r/57AABC8B.1040409@zoho.com
[akpm@linux-foundation.org: locate get_count_order_long() next to get_count_order()]
[akpm@linux-foundation.org: move get_count_order[_long] definitions to pick up fls_long()]
[zijun_hu@htc.com: move out get_count_order[_long]() from __KERNEL__ scope]
 Link: http://lkml.kernel.org/r/57B2C4CE.80303@zoho.com
Link: http://lkml.kernel.org/r/fc045ecf-20fa-0722-b3ac-9a6140488fad@zoho.comSigned-off-by: zijun_hu <zijun_hu@htc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When selecting an oom victim, we use the same heuristic for both memory
cgroup and global oom.  The only difference is the scope of tasks to
select the victim from.  So we could just export an iterator over all
memcg tasks and keep all oom related logic in oom_kill.c, but instead we
duplicate pieces of it in memcontrol.c reusing some initially private
functions of oom_kill.c in order to not duplicate all of it.  That looks
ugly and error prone, because any modification of select_bad_process
should also be propagated to mem_cgroup_out_of_memory.

Let's rework this as follows: keep all oom heuristic related code private
to oom_kill.c and make oom_kill.c use exported memcg functions when it's
really necessary (like in case of iterating over memcg tasks).

Link: http://lkml.kernel.org/r/1470056933-7505-1-git-send-email-vdavydov@virtuozzo.comSigned-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The extern struct variable ocfs2_inode_cache is not defined. It meant to
use ocfs2_inode_cachep defined in super.c, I think. Fortunately it is
not used anywhere now, so no impact actually. Clean it up to fix this
mistake.

Link: http://lkml.kernel.org/r/57E1E49D.8050503@huawei.comSigned-off-by: Joseph Qi <joseph.qi@huawei.com>
Reviewed-by: Eric Ren <zren@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The workqueue "dlm_worker" queues a single work item &dlm->dispatched_work
and thus it doesn't require execution ordering.  Hence, alloc_workqueue
has been used to replace the deprecated create_singlethread_workqueue
instance.

The WQ_MEM_RECLAIM flag has been set to ensure forward progress under
memory pressure.

Since there are fixed number of work items, explicit concurrency
limit is unnecessary here.

Link: http://lkml.kernel.org/r/2b5ad8d6688effe1a9ddb2bc2082d26fbbe00302.1472590094.git.bhaktipriya96@gmail.comSigned-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The workqueue "ocfs2_wq" queues multiple work items viz
&osb->la_enable_wq, &journal->j_recovery_work, &os->os_orphan_scan_work,
&osb->osb_truncate_log_wq which require strict execution ordering.  Hence,
an ordered dedicated workqueue has been used.

WQ_MEM_RECLAIM has been set to ensure forward progress under memory
pressure because the workqueue is being used on a memory reclaim path.

Link: http://lkml.kernel.org/r/66279de510a7f4cfc6e386d99b7e04b3f65fb11b.1472590094.git.bhaktipriya96@gmail.comSigned-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The workqueue "o2net_wq" queues multiple work items viz
&old_sc->sc_shutdown_work, &sc->sc_rx_work, &sc->sc_connect_work which
require strict execution ordering.  Hence, an ordered dedicated
workqueue has been used.

WQ_MEM_RECLAIM has been set to ensure forward progress under memory
pressure.

Link: http://lkml.kernel.org/r/ddc12e5766c79ba26f8a00d98049107f8a1d4866.1472590094.git.bhaktipriya96@gmail.comSigned-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The workqueue "user_dlm_worker" queues a single work item
&lockres->l_work per user_lock_res instance and so it doesn't require
execution ordering.  Hence, alloc_workqueue has been used to replace the
deprecated create_singlethread_workqueue instance.

The WQ_MEM_RECLAIM flag has been set to ensure forward progress under
memory pressure.

Since there are fixed number of work items, explicit concurrency
limit is unnecessary here.

Link: http://lkml.kernel.org/r/9748136d3a3b18138ad1d6ba708367aa1fe9f98c.1472590094.git.bhaktipriya96@gmail.comSigned-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Though the time_before and time_after family of functions were nicely
extended to support jiffies64, so that the interface would be consistent,
it was forgotten to also extend the before/after jiffies functions to
support jiffies64.  This commit brings the interface to parity between
jiffies and jiffies64, which is quite convenient.

Link: http://lkml.kernel.org/r/20160929033319.12188-1-Jason@zx2c4.comSigned-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use assert_spin_locked() macro instead of hand-made BUG_ON statements.

Link: http://lkml.kernel.org/r/1474537439-18919-1-git-send-email-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When freeing permission events by fsnotify_destroy_event(), the warning
WARN_ON(!list_empty(&event->list)); may falsely hit.

This is because although fanotify_get_response() saw event->response
set, there is nothing to make sure the current CPU also sees the removal
of the event from the list.  Add proper locking around the WARN_ON() to
avoid the false warning.

Link: http://lkml.kernel.org/r/1473797711-14111-7-git-send-email-jack@suse.czReported-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fanotify code has its own lock (access_lock) to protect a list of events
waiting for a response from userspace.

However this is somewhat awkward as the same list_head in the event is
protected by notification_lock if it is part of the notification queue
and by access_lock if it is part of the fanotify private queue which
makes it difficult for any reliable checks in the generic code.  So make
fanotify use the same lock - notification_lock - for protecting its
private event list.

Link: http://lkml.kernel.org/r/1473797711-14111-6-git-send-email-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

notification_mutex is used to protect the list of pending events.  As such
there's no reason to use a sleeping lock for it.  Convert it to a
spinlock.

[jack@suse.cz: fixed version]
  Link: http://lkml.kernel.org/r/1474031567-1831-1-git-send-email-jack@suse.cz
Link: http://lkml.kernel.org/r/1473797711-14111-5-git-send-email-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fsnotify_flush_notify() and fanotify_release() destroy notification
event while holding notification_mutex.

The destruction of fanotify event includes a path_put() call which may
end up calling into a filesystem to delete an inode if we happen to be
the last holders of dentry reference which happens to be the last holder
of inode reference.

That in turn may violate lock ordering for some filesystems since
notification_mutex is also acquired e. g. during write when generating
fanotify event.

Also this is the only thing that forces notification_mutex to be a
sleeping lock.  So drop notification_mutex before destroying a
notification event.

Link: http://lkml.kernel.org/r/1473797711-14111-4-git-send-email-jack@suse.czSigned-off-by: Jan Kara <jack@suse.cz>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c updates from Wolfram Sang:
 "Here is the 4.9 pull request from I2C including:

   - centralized error messages when registering to the core
   - improved lockdep annotations to prevent false positives
   - DT support for muxes, gates, and arbitrators
   - bus speeds can now be obtained from ACPI
   - i2c-octeon got refactored and now supports ThunderX SoCs, too
   - i2c-tegra and i2c-designware got a bigger bunch of updates
   - a couple of standard driver fixes and improvements"

* 'i2c/for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (71 commits)
  i2c: axxia: disable clks in case of failure in probe
  i2c: octeon: thunderx: Limit register access retries
  i2c: uniphier-f: fix misdetection of incomplete STOP condition
  gpio: pca953x: variable 'id' was used twice
  i2c: i801: Add support for Kaby Lake PCH-H
  gpio: pca953x: fix an incorrect lockdep warning
  i2c: add a warning to i2c_adapter_depth()
  lockdep: make MAX_LOCKDEP_SUBCLASSES unconditionally visible
  i2c: export i2c_adapter_depth()
  i2c: rk3x: Fix variable 'min_total_ns' unused warning
  i2c: rk3x: Fix sparse warning
  i2c / ACPI: Do not touch an I2C device if it belongs to another adapter
  i2c: octeon: Fix high-level controller status check
  i2c: octeon: Avoid sending STOP during recovery
  i2c: octeon: Fix set SCL recovery function
  i2c: rcar: add support for r8a7796 (R-Car M3-W)
  i2c: imx: make bus recovery through pinctrl optional
  i2c: meson: add gxbb compatible string
  i2c: uniphier-f: set the adapter to master mode when probing
  i2c: uniphier-f: avoid WARN_ON() of clk_disable() in failure path
  ...

Pull trivial updates from Jiri Kosina:
 "The usual rocket science from the trivial tree"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  tracing/syscalls: fix multiline in error message text
  lib/Kconfig.debug: fix DEBUG_SECTION_MISMATCH description
  doc: vfs: fix fadvise() sycall name
  x86/entry: spell EBX register correctly in documentation
  securityfs: fix securityfs_create_dir comment
  irq: Fix typo in tracepoint.xml

Pull livepatching updates from Jiri Kosina:

 - fix for patching modules that contain .altinstructions or
   .parainstructions sections, from Jessica Yu

 - make TAINT_LIVEPATCH a per-module flag (so that it's immediately
   clear which module caused the taint), from Josh Poimboeuf

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch/module: make TAINT_LIVEPATCH module-specific
  Documentation: livepatch: add section about arch-specific code
  livepatch/x86: apply alternatives and paravirt patches after relocations
  livepatch: use arch_klp_init_object_loaded() to finish arch-specific tasks

Pull HID updates from Jiri Kosina:

 - Integrated Sensor Hub support (Cherrytrail+) from Srinivas Pandruvada

 - Big cleanup of Wacom driver; namely it's now using devres, and the
   standardized LED API so that libinput doesn't need to have root
   access any more, with substantial amount of other cleanups
   piggy-backing on top. All this from Benjamin Tissoires

 - Report descriptor parsing would now ignore and out-of-range System
   controls in case of the application actually being System Control.
   This fixes quite some issues with several devices, and allows us to
   remove a few ->report_fixup callbacks. From Benjamin Tissoires

 - ... a lot of other assorted small fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (76 commits)
  HID: add missing \n to end of dev_warn messages
  HID: alps: fix multitouch cursor issue
  HID: hid-logitech: Documentation updates/corrections
  HID: hid-logitech: Improve Wingman Formula Force GP support
  HID: hid-logitech: Rewrite of descriptor for all DF wheels
  HID: hid-logitech: Compute combined pedals value
  HID: hid-logitech: Add combined pedal support Logitech wheels
  HID: hid-logitech: Introduce control for combined pedals feature
  HID: sony: Update copyright and add Dualshock 4 rate control note
  HID: sony: Defer the initial USB Sixaxis output report
  HID: sony: Relax duplicate checking for USB-only devices
  Revert "HID: microsoft: fix invalid rdesc for 3k kbd"
  HID: alps: fix error return code in alps_input_configured()
  HID: alps: fix stick device not working after resume
  HID: support for keyboard - Corsair STRAFE
  HID: alps: Fix memory leak
  HID: uclogic: Add support for UC-Logic TWHA60 v3
  HID: uclogic: Override constant descriptors
  HID: uclogic: Support UGTizer GP0610 partially
  HID: uclogic: Add support for several more tablets
  ...

Pull PCI updates from Bjorn Helgaas:
 "Summary of PCI changes for the v4.9 merge window:

  Enumeration:
   - microblaze: Add multidomain support for procfs (Bharat Kumar Gogada)

  Resource management:
   - Ignore requested alignment for PROBE_ONLY and fixed resources (Yongji Xie)
   - Ignore requested alignment for VF BARs (Yongji Xie)

  PCI device hotplug:
   - Make core explicitly non-modular (Paul Gortmaker)

  PCIe native device hotplug:
   - Rename pcie_isr() locals for clarity (Bjorn Helgaas)
   - Return IRQ_NONE when we can't read interrupt status (Bjorn Helgaas)
   - Remove unnecessary guard (Bjorn Helgaas)
   - Clean up dmesg "Slot(%s)" messages (Bjorn Helgaas)
   - Remove useless pciehp_get_latch_status() calls (Bjorn Helgaas)
   - Clear attention LED on device add (Keith Busch)
   - Allow exclusive userspace control of indicators (Keith Busch)
   - Process all hotplug events before looking for new ones (Mayurkumar Patel)
   - Don't re-read Slot Status when queuing hotplug event (Mayurkumar Patel)
   - Don't re-read Slot Status when handling surprise event (Mayurkumar Patel)
   - Make explicitly non-modular (Paul Gortmaker)

  Power management:
   - Afford direct-complete to devices with non-standard PM (Lukas Wunner)
   - Query platform firmware for device power state (Lukas Wunner)
   - Recognize D3cold in pci_update_current_state() (Lukas Wunner)
   - Avoid unnecessary resume after direct-complete (Lukas Wunner)
   - Make explicitly non-modular (Paul Gortmaker)

  Virtualization:
   - Mark Atheros AR9580 to avoid bus reset (Maik Broemme)
   - Check for pci_setup_device() failure in pci_iov_add_virtfn() (Po Liu)

  MSI:
   - Enable PCI_MSI_IRQ_DOMAIN support for ARC (Joao Pinto)

  AER:
   - Remove aerdriver.nosourceid kernel parameter (Bjorn Helgaas)
   - Remove aerdriver.forceload kernel parameter (Bjorn Helgaas)
   - Fix aer_probe() kernel-doc comment (Cao jin)
   - Add bus flag to skip source ID matching (Jon Derrick)
   - Avoid memory allocation in interrupt handling path (Jon Derrick)
   - Cache capability position (Keith Busch)
   - Make explicitly non-modular (Paul Gortmaker)
   - Remove duplicate AER severity translation (Tyler Baicar)
   - Send correct severity to calculate AER severity (Tyler Baicar)

  Precision Time Measurement:
   - Add Precision Time Measurement (PTM) support (Jonathan Yong)
   - Add PTM clock granularity information (Bjorn Helgaas)
   - Add pci_enable_ptm() for drivers to enable PTM on endpoints (Bjorn Helgaas)

  Generic host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Make explicitly non-modular (Paul Gortmaker)

  Altera host bridge driver:
   - Remove redundant platform_get_resource() return value check (Bjorn Helgaas)
   - Poll for link training status after retraining the link (Ley Foon Tan)
   - Rework config accessors for use without a struct pci_bus (Ley Foon Tan)
   - Move retrain from fixup to altera_pcie_host_init() (Ley Foon Tan)
   - Make MSI explicitly non-modular (Paul Gortmaker)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)

  ARM Versatile host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)

  Axis ARTPEC-6 host bridge driver:
   - Drop __init from artpec6_add_pcie_port() (Niklas Cassel)

  Freescale i.MX6 host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Intel VMD host bridge driver:
   - Add quirk for AER to ignore source ID (Jon Derrick)
   - Allocate IRQ lists with correct MSI-X count (Jon Derrick)
   - Convert to use pci_alloc_irq_vectors() API (Jon Derrick)
   - Eliminate vmd_vector member from list type (Jon Derrick)
   - Eliminate index member from IRQ list (Jon Derrick)
   - Synchronize with RCU freeing MSI IRQ descs (Keith Busch)
   - Request userspace control of PCIe hotplug indicators (Keith Busch)
   - Move VMD driver to drivers/pci/host (Keith Busch)

  Marvell Aardvark host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Remove redundant dev_err call in advk_pcie_probe() (Wei Yongjun)

  Microsoft Hyper-V host bridge driver:
   - Use zero-length array in struct pci_packet (Dexuan Cui)
   - Use pci_function_description[0] in struct definitions (Dexuan Cui)
   - Remove the unused 'wrk' in struct hv_pcibus_device (Dexuan Cui)
   - Handle vmbus_sendpacket() failure in hv_compose_msi_msg() (Dexuan Cui)
   - Handle hv_pci_generic_compl() error case (Dexuan Cui)
   - Use list_move_tail() instead of list_del() + list_add_tail() (Wei Yongjun)

  NVIDIA Tegra host bridge driver:
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Remove redundant _data suffix (Thierry Reding)
   - Use of_device_get_match_data() (Thierry Reding)

  Qualcomm host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Renesas R-Car host bridge driver:
   - Consolidate register space lookup and ioremap (Bjorn Helgaas)
   - Don't disable/unprepare clocks on prepare/enable failure (Geert Uytterhoeven)
   - Add multi-MSI support (Grigory Kletsko)
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Fix some checkpatch warnings (Sergei Shtylyov)
   - Try increasing PCIe link speed to 5 GT/s at boot (Sergei Shtylyov)

  Rockchip host bridge driver:
   - Add DT bindings for Rockchip PCIe controller (Shawn Lin)
   - Add Rockchip PCIe controller support (Shawn Lin)
   - Improve the deassert sequence of four reset pins (Shawn Lin)
   - Fix wrong transmitted FTS count (Shawn Lin)
   - Increase the Max Credit update interval (Rajat Jain)

  Samsung Exynos host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  ST Microelectronics SPEAr13xx host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  Synopsys DesignWare host bridge driver:
   - Return data directly from dw_pcie_readl_rc() (Bjorn Helgaas)
   - Exchange viewport of `MEMORYs' and `CFGs/IOs' (Dong Bo)
   - Check LTSSM training bit before deciding link is up (Jisheng Zhang)
   - Move link wait definitions to .c file (Joao Pinto)
   - Wait for iATU enable (Joao Pinto)
   - Add iATU Unroll feature (Joao Pinto)
   - Fix pci_remap_iospace() failure path (Lorenzo Pieralisi)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)
   - Keep viewport fixed for IO transaction if num_viewport > 2 (Pratyush Anand)
   - Remove redundant platform_get_resource() return value check (Wei Yongjun)

  TI DRA7xx host bridge driver:
   - Make explicitly non-modular (Paul Gortmaker)

  TI Keystone host bridge driver:
   - Propagate request_irq() failure (Wei Yongjun)

  Xilinx AXI host bridge driver:
   - Keep both legacy and MSI interrupt domain references (Bharat Kumar Gogada)
   - Clear interrupt register for invalid interrupt (Bharat Kumar Gogada)
   - Clear correct MSI set bit (Bharat Kumar Gogada)
   - Dispose of MSI virtual IRQ (Bharat Kumar Gogada)
   - Make explicitly non-modular (Paul Gortmaker)
   - Relax device number checking to allow SR-IOV (Po Liu)

  Xilinx NWL host bridge driver:
   - Expand error logging (Bharat Kumar Gogada)
   - Enable all MSI interrupts using MSI mask (Bharat Kumar Gogada)
   - Make explicitly non-modular (Paul Gortmaker)

  Miscellaneous:
   - Drop CONFIG_KEXEC_CORE ifdeffery (Lukas Wunner)
   - portdrv: Make explicitly non-modular (Paul Gortmaker)
   - Make DPC explicitly non-modular (Paul Gortmaker)"

* tag 'pci-v4.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (105 commits)
  x86/PCI: VMD: Move VMD driver to drivers/pci/host
  PCI: rockchip: Fix wrong transmitted FTS count
  PCI: rockchip: Improve the deassert sequence of four reset pins
  PCI: rockchip: Increase the Max Credit update interval
  PCI: rcar: Try increasing PCIe link speed to 5 GT/s at boot
  PCI/AER: Fix aer_probe() kernel-doc comment
  PCI: Ignore requested alignment for VF BARs
  PCI: Ignore requested alignment for PROBE_ONLY and fixed resources
  PCI: Avoid unnecessary resume after direct-complete
  PCI: Recognize D3cold in pci_update_current_state()
  PCI: Query platform firmware for device power state
  PCI: Afford direct-complete to devices with non-standard PM
  PCI/AER: Cache capability position
  PCI/AER: Avoid memory allocation in interrupt handling path
  x86/PCI: VMD: Request userspace control of PCIe hotplug indicators
  PCI: pciehp: Allow exclusive userspace control of indicators
  ACPI / APEI: Send correct severity to calculate AER severity
  PCI/AER: Remove duplicate AER severity translation
  x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs
  x86/PCI: VMD: Eliminate index member from IRQ list
  ...

Pull VFIO updates from Alex Williamson:
 - comment fixes (Wei Jiangang)
 - static symbols (Baoyou Xie)
 - FLR virtualization (Alex Williamson)
 - catching INTx enabling after MSI/X teardown (Alex Williamson)
 - update to pci_alloc_irq_vectors helpers (Christoph Hellwig)

* tag 'vfio-v4.9-rc1' of git://github.com/awilliam/linux-vfio:
  vfio_pci: use pci_alloc_irq_vectors
  vfio-pci: Disable INTx after MSI/X teardown
  vfio-pci: Virtualize PCIe & AF FLR
  vfio: platform: mark symbols static where possible
  vfio/pci: Fix typos in comments

Pull MD updates from Shaohua Li:
 "This update includes:

   - new AVX512 instruction based raid6 gen/recovery algorithm

   - a couple of md-cluster related bug fixes

   - fix a potential deadlock

   - set nonrotational bit for raid array with SSD

   - set correct max_hw_sectors for raid5/6, which hopefuly can improve
     performance a little bit

   - other minor fixes"

* tag 'md/4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md: set rotational bit
  raid6/test/test.c: bug fix: Specify aligned(alignment) attributes to the char arrays
  raid5: handle register_shrinker failure
  raid5: fix to detect failure of register_shrinker
  md: fix a potential deadlock
  md/bitmap: fix wrong cleanup
  raid5: allow arbitrary max_hw_sectors
  lib/raid6: Add AVX512 optimized xor_syndrome functions
  lib/raid6/test/Makefile: Add avx512 gen_syndrome and recovery functions
  lib/raid6: Add AVX512 optimized recovery functions
  lib/raid6: Add AVX512 optimized gen_syndrome functions
  md-cluster: make resync lock also could be interruptted
  md-cluster: introduce dlm_lock_sync_interruptible to fix tasks hang
  md-cluster: convert the completion to wait queue
  md-cluster: protect md_find_rdev_nr_rcu with rcu lock
  md-cluster: clean related infos of cluster
  md: changes for MD_STILL_CLOSED flag
  md-cluster: remove some unnecessary dlm_unlock_sync
  md-cluster: use FORCEUNLOCK in lockres_free
  md-cluster: call md_kick_rdev_from_array once ack failed

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of major driver updates (hpsa,
  be2iscsi, hisi_sas, zfcp, cxlflash). There's a new incarnation of hpsa
  called smartpqi for which a driver is added, there's some cleanup work
  of the ibm vscsi target and updates to libfc, plus a whole host of
  minor fixes and updates and finally the removal of several ISA drivers
  which seem not to have been used for years"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (173 commits)
  scsi: mvsas: Mark symbols static where possible
  scsi: pm8001: Mark symbols static where possible
  scsi: arcmsr: Simplify user_len checking
  scsi: fcoe: fix off by one in eth2fc_speed()
  scsi: dtc: remove from tree
  scsi: t128: remove from tree
  scsi: pas16: remove from tree
  scsi: u14-34f: remove from tree
  scsi: ultrastor: remove from tree
  scsi: in2000: remove from tree
  scsi: wd7000: remove from tree
  scsi: scsi_dh_alua: Fix memory leak in alua_rtpg()
  scsi: lpfc: Mark symbols static where possible
  scsi: hpsa: correct call to hpsa_do_reset
  scsi: ufs: Get a TM service response from the correct offset
  scsi: ibmvfc: Fix I/O hang when port is not mapped
  scsi: megaraid_sas: clean function declarations in megaraid_sas_base.c up
  scsi: ipr: Remove redundant messages at adapter init time
  scsi: ipr: Don't log unnecessary 9084 error details
  scsi: smartpqi: raid bypass lba calculation fix
  ...

Pull input subsystem updates from Dmitry Torokhov:
 "You will get

   - a new driver for Elan eKTF2127 touchscreen controllers

   - a new "gpio-decoder" driver to read and report state of several
     GPIO lines

   - an ADC resistor ladder driver

   - the ft6326 driver is removed because edt-ft5x06 handles the same
     devices just fine.

  .. plus the regular slew of driver fixes/enhancements"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (26 commits)
  Input: elan_i2c - fix return tests of i2c_smbus_read_block_data()
  Input: ektf2127 - mark PM functions as __maybe_unused
  Input: snvs_pwrkey - drop input_free_device call if input_register_device fails
  Input: add support for Elan eKTF2127 touchscreen controller
  Input: serio - add hangup support
  Input: tps65218-pwrbutton - add support for tps65217 variant
  Input: jornada720_ts - get rid of mach/irqs.h and mach/hardware.h includes
  Input: jornada720_kbd - remove unneeded mach/hardware.h include
  Input: focaltech - mark focaltech_set_resolution() static
  Input: wdt87xx_i2c - fix the flash erase issue
  Input: gpio-keys-polled - don't use unit-address with button nodes
  Input: add generic input driver to read encoded GPIO lines
  Input: add ADC resistor ladder driver
  Input: pegasus_notetaker - directly include workqueue header
  Input: elants_i2c - get product id on recovery mode for FW update
  Input: wm97xx - remove deprecated create_singletheread_workqueue
  Input: mc13783_ts - remove deprecated create_singletheread_workqueue
  Input: psmouse - remove deprecated create_singletheread_workqueue
  Input: jornada720_kbd - switch to using dev_dbg
  Input: jornada720_kbd - get rid of mach/irqs.h include
  ...

Pull MFD updates from Lee Jones:
 "Core framework:
   - Add the MFD bindings doc to MAINTAINERS

  New drivers:
   - X-Powers AC100 Audio CODEC and RTC
   - TI LP873x PMIC
   - Rockchip RK808 PMIC
   - Samsung Exynos Low Power Audio

  New device support:
   - Add support for STMPE1600 variant to stmpe
   - Add support for PM8018 PMIC to pm8921-core
   - Add support for AXP806 PMIC in axp20x
   - Add support for AXP209 GPIO in axp20x

  New functionality:
   - Add support for Reset to all STMPE variants
   - Add support for MKBP event support to cros_ec
   - Add support for USB to intel_soc_pmic_bxtwc
   - Add support for IRQs and Power Button to tps65217

  Fix-ups:
   - Clean-up defunct author emails (da9063, max14577)
   - Kconfig fixups (wm8350-i2c, as37220
   - Constify (altera-a10sr, sm501)
   - Supply PCI IDs (intel-lpss-pci)
   - Improve clocking (qcom_rpm)
   - Fix IRQ probing (ucb1x00-core)
   - Ensure fault log is cleared (da9052)
   - Remove NO_IRQ check (ucb1x00-core)
   - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
   - Non standard declaration (tps65217, max8997-irq)
   - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
     cros_ec_spi)
   - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
     sun6i-prcm, twl-core)
   - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
     lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)

  Bugfixes:
   - Release OF pointer (qcom_rpm)
   - Avoid double shifting in suspend/resume (88pm80x)
   - Fix 'defined but not used' error (exynos-lpass)
   - Fix 'sleeping whilst attomic' (atmel-hlcdc)"

* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: arizona: Handle probe deferral for reset GPIO
  mfd: arizona: Remove arizona_of_get_named_gpio helper function
  mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
  mfd: twl6040: Register child device for twl6040-pdmclk
  mfd: cros_ec_spi: Remove unused variable 'request'
  mfd: omap-usb-host: Return value is not 'const int'
  mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  mfd: ab8500-debugfs: Prevent initialised field from being over-written
  mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
  mfd: tps65217: Fix nonstandard declaration
  mfd: lp873x: Remove unused mutex lock from struct lp873x
  mfd: atmel-hlcdc: Do not sleep in atomic context
  mfd: exynos-lpass: Mark PM functions as __maybe_unused
  mfd: intel-lpss: Add default I2C device properties for Apollo Lake
  mfd: twl-core: Make it explicitly non-modular
  mfd: sun6i-prcm: Make it explicitly non-modular
  mfd: smsc-ece1099: Make it explicitly non-modular
  ...

Merge branches 'for-4.8/upstream-fixes', 'for-4.9/alps', 'for-4.9/hid-input', 'for-4.9/intel-ish', 'for-4.9/kye-uclogic-waltop-fixes', 'for-4.9/logitech', 'for-4.9/sony', 'for-4.9/upstream' and 'for-4.9/wacom' into for-linus

Pull backlight updates from Lee Jones:
 "Fix-ups:

   - Remove unused .owner assignment; tosa_bl
   - Enable GPIO sleeping; pwm_bl"

* tag 'backlight-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: pwm_bl: Handle gpio that can sleep
  backlight-tosa: Delete unnecessary assignment for the field "owner"

Pull HSI fix from Sebastian Reichel:
 "Fix hsi userspace header"

* tag 'hsi-for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: hsi_char.h: use __u32 from linux/types.h

Pull power supply and reset updates from Sebastian Reichel:
 - move power supply drivers to drivers/power/supply
 - unify location of power supply DT documentation
 - tps65217-charger: IRQ support
 - act8945a-charger: misc. cleanups & improvements
 - sbs-battery cleanup
 - fix users of deprecated create_singlethread_workqueue()
 - misc fixes.

* tag 'for-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (46 commits)
  power: supply: bq27xxx_battery: allow kernel poll_interval parameter runtime update
  power: supply: sbs-battery: Cleanup removal of chip->pdata
  power: reset: st: Remove obsolete platforms from dt doc
  power: reset: st-poweroff: Remove obsolete platforms.
  power: reset: zx-reboot: Unmap region obtained by of_iomap
  power: reset: xgene-reboot: Unmap region obtained by of_iomap
  power: supply: ab8500: cleanup with list_first_entry_or_null()
  power: reset: add in missing white space in error message text
  sbs-battery: make writes to ManufacturerAccess optional
  power: bq24257: Fix use of uninitialized pointer bq->charger
  power: supply: sbs-battery: simplify DT parsing
  power: supply: bq24735-charger: Request status GPIO with initial input setup
  power: supply: sbs-battery: Use gpio_desc and sleeping calls for battery detect
  power: supply: act8945a_charger: Add max current property
  power: supply: act8945a_charger: Add capacity level property
  doc: bindings: power: act8945a-charger: Update properties.
  power: supply: act8945a_charger: Fix the power supply type
  power: supply: act8945a_charger: Add status change update support
  power: supply: act8945a_charger: Improve state handling
  power: supply: act8945a_charger: Remove "battery_temperature"
  ...

Pull mailbox updates from Jussi Brar:
 "New driver and DT bindings for MHU controller integrated on Amlogic
  Meson platform"

* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  dt-bindings: mailbox: Add Amlogic Meson MHU Bindings
  mailbox: Add Platform Message-Handling-Unit variant driver

Pull dmaengine updates from Vinod Koul:
 "This is bit large pile of code which bring in some nice additions:

   - Error reporting: we have added a new mechanism for users of
     dmaenegine to register a callback_result which tells them the
     result of the dma transaction. Right now only one user (ntb) is
     using it.

   - As we discussed on KS mailing list and pointed out NO_IRQ has no
     place in kernel, this also remove NO_IRQ from dmaengine subsystem
     (both arm and ppc users)

   - Support for IOMMU slave transfers and its implementation for arm.

   - To get better build coverage, enable COMPILE_TEST for bunch of
     driver, and fix the warning and sparse complaints on these.

   - Apart from above, usual updates spread across drivers"

* tag 'dmaengine-4.9-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (169 commits)
  async_pq_val: fix DMA memory leak
  dmaengine: virt-dma: move function declarations
  dmaengine: omap-dma: Enable burst and data pack for SG
  DT: dmaengine: rcar-dmac: document R8A7743/5 support
  dmaengine: fsldma: Unmap region obtained by of_iomap
  dmaengine: jz4780: fix resource leaks on error exit return
  dma-debug: fix ia64 build, use PHYS_PFN
  dmaengine: coh901318: fix integer overflow when shifting more than 32 places
  dmaengine: edma: avoid uninitialized variable use
  dma-mapping: fix m32r build warning
  dma-mapping: fix ia64 build, use PHYS_PFN
  dmaengine: ti-dma-crossbar: enable COMPILE_TEST
  dmaengine: omap-dma: enable COMPILE_TEST
  dmaengine: edma: enable COMPILE_TEST
  dmaengine: ti-dma-crossbar: Fix of_device_id data parameter usage
  dmaengine: ti-dma-crossbar: Correct type for of_find_property() third parameter
  dmaengine/ARM: omap-dma: Fix the DMAengine compile test on non OMAP configs
  dmaengine: edma: Rename set_bits and remove unused clear_bits helper
  dmaengine: edma: Use correct type for of_find_property() third parameter
  dmaengine: edma: Fix of_device_id data parameter usage (legacy vs TPCC)
  ...

Pull rpmsg updates from Bjorn Andersson:
 "The bulk of these patches involve splitting the rpmsg implementation
  into a framework/API part and a virtio specific backend part. It then
  adds the Qualcomm Shared Memory Device (SMD) as an additional
  supported wire format.

  Also included is a set of code style cleanups that have been lingering
  for a while"

* tag 'rpmsg-v4.9' of git://github.com/andersson/remoteproc: (26 commits)
  rpmsg: smd: fix dependency on QCOM_SMD=n
  rpmsg: Introduce Qualcomm SMD backend
  rpmsg: Allow callback to return errors
  rpmsg: Move virtio specifics from public header
  rpmsg: virtio: Hide vrp pointer from the public API
  rpmsg: Hide rpmsg indirection tables
  rpmsg: Split rpmsg core and virtio backend
  rpmsg: Split off generic tail of create_channel()
  rpmsg: Move helper for finding rpmsg devices to core
  rpmsg: Move endpoint related interface to rpmsg core
  rpmsg: Indirection table for rpmsg_endpoint operations
  rpmsg: Move rpmsg_device API to new file
  rpmsg: Introduce indirection table for rpmsg_device operations
  rpmsg: Clean up rpmsg device vs channel naming
  rpmsg: Make rpmsg_create_ept() take channel_info struct
  rpmsg: rpmsg_send() operations takes rpmsg_endpoint
  rpmsg: Name rpmsg devices based on channel id
  rpmsg: Enable matching devices with drivers based on DT
  rpmsg: Drop prototypes for non-existing functions
  samples/rpmsg: add support for multiple instances
  ...

Pull remoteproc updates from Bjorn Andersson:
 "In addition to a slew of minor fixes and cleanups these patches
  refactor how we deal with remoteprocs that will be auto-booting
  themselves.

  That does clean up the remote resource handling but makes for
  additional work to clarify responsibilities and life cycles of
  resources. We also revise how module locking of remoteproc drivers
  work, so that they are locked as we hand out references to them to
  third parties, rather than only when booted by anyone.

  In addition to that we also introduce the Qualcomm Wireless Subsystem
  remoteproc driver"

* tag 'rproc-v4.9' of git://github.com/andersson/remoteproc: (26 commits)
  remoteproc: Refactor rproc module locking
  remoteproc: Split driver and consumer dereferencing
  remoteproc: Correct resource handling upon boot failure
  remoteproc: Drop unnecessary NULL check
  remoteproc: core: transform struct fw_rsc_vdev_vring reserved field in pa
  remoteproc: Modify FW_RSC_ADDR_ANY definition
  remoteproc: qcom: wcnss: Fix return value check in wcnss_probe()
  remoteproc: qcom: Introduce WCNSS peripheral image loader
  dt-binding: remoteproc: Introduce Qualcomm WCNSS loader binding
  remoteproc: Only update table_ptr if we have a loaded table
  remoteproc: Move handling of cached table to boot/shutdown
  remoteproc: Move vdev handling to boot/shutdown
  remoteproc: Calculate max_notifyid during load
  remoteproc: Introduce auto-boot flag
  remoteproc/omap: revise a minor error trace message
  remoteproc/omap: fix various code formatting issues
  remoteproc: print hex numbers with a leading 0x format
  remoteproc: align code with open parenthesis
  remoteproc: fix bare unsigned type usage
  remoteproc: use variable names for sizeof() operator
  ...

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've investigated how f2fs deals with errors given by
  our fault injection facility. With this, we could fix several corner
  cases. And, in order to improve the performance, we set inline_dentry
  by default and enhance the exisiting discard issue flow. In addition,
  we added f2fs_migrate_page for better memory management.

  Enhancements:
   - set inline_dentry by default
   - improve discard issue flow
   - add more fault injection cases in f2fs
   - allow block preallocation for encrypted files
   - introduce migrate_page callback function
   - avoid truncating the next direct node block at every checkpoint

  Bug fixes:
   - set page flag correctly between write_begin and write_end
   - missing error handling cases detected by fault injection
   - preallocate blocks regarding to 4KB alignement correctly
   - dentry and filename handling of encryption
   - lost xattrs of directories"

* tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (69 commits)
  f2fs: introduce update_ckpt_flags to clean up
  f2fs: don't submit irrelevant page
  f2fs: fix to commit bio cache after flushing node pages
  f2fs: introduce get_checkpoint_version for cleanup
  f2fs: remove dead variable
  f2fs: remove redundant io plug
  f2fs: support checkpoint error injection
  f2fs: fix to recover old fault injection config in ->remount_fs
  f2fs: do fault injection initialization in default_options
  f2fs: remove redundant value definition
  f2fs: support configuring fault injection per superblock
  f2fs: adjust display format of segment bit
  f2fs: remove dirty inode pages in error path
  f2fs: do not unnecessarily null-terminate encrypted symlink data
  f2fs: handle errors during recover_orphan_inodes
  f2fs: avoid gc in cp_error case
  f2fs: should put_page for summary page
  f2fs: assign return value in f2fs_gc
  f2fs: add customized migrate_page callback
  f2fs: introduce cp_lock to protect updating of ckpt_flags
  ...

Pull pstore updates from Kees Cook:

 - Fix bug in module unloading

 - Switch to always using spinlock over cmpxchg

 - Explicitly define pstore backend's supported modes

 - Remove bounce buffer from pmsg

 - Switch to using memcpy_to/fromio()

 - Error checking improvements

* tag 'pstore-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ramoops: move spin_lock_init after kmalloc error checking
  pstore/ram: Use memcpy_fromio() to save old buffer
  pstore/ram: Use memcpy_toio instead of memcpy
  pstore/pmsg: drop bounce buffer
  pstore/ram: Set pstore flags dynamically
  pstore: Split pstore fragile flags
  pstore/core: drop cmpxchg based updates
  pstore/ramoops: fixup driver removal

Pull orangefs updates from Mike Marshall:
 "Miscellaneous improvements:
   - clean up debugfs globals
   - remove dead code in sysfs
   - reorganize duplicated sysfs attribute structs
   - consolidate sysfs show and store functions
   - remove duplicated sysfs_ops structures
   - describe organization of sysfs
   - make devreq_mutex static
   - g_orangefs_stats -> orangefs_stats for consistency
   - rename most remaining global variables

  Feature negotiation:
   - enable Orangefs userspace and kernel module to negotiate mutually
     supported features"

* tag 'for-linus-4.9-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  Revert "orangefs: bump minimum userspace version"
  orangefs: bump minimum userspace version
  orangefs: rename most remaining global variables
  orangefs: g_orangefs_stats -> orangefs_stats for consistency
  orangefs: make devreq_mutex static
  orangefs: describe organization of sysfs
  orangefs: remove duplicated sysfs_ops structures
  orangefs: consolidate sysfs show and store functions
  orangefs: reorganize duplicated sysfs attribute structs
  orangefs: remove dead code in sysfs
  orangefs: clean up debugfs globals
  orangefs: do not allow client readahead cache without feature bit
  orangefs: add features op
  orangefs: record userspace version for feature compatbility
  orangefs: add readahead count and size to sysfs
  orangefs: re-add flush_racache from out-of-tree
  orangefs: turn param response value into union
  orangefs: add missing param request ops
  orangefs: rename remaining bits of mmap readahead cache

Pull tracing updates from Steven Rostedt:
 "This release cycle is rather small.  Just a few fixes to tracing.

  The big change is the addition of the hwlat tracer. It not only
  detects SMIs, but also other latency that's caused by the hardware. I
  have detected some latency from large boxes having bus contention"

* tag 'trace-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Call traceoff trigger after event is recorded
  ftrace/scripts: Add helper script to bisect function tracing problem functions
  tracing: Have max_latency be defined for HWLAT_TRACER as well
  tracing: Add NMI tracing in hwlat detector
  tracing: Have hwlat trace migrate across tracing_cpumask CPUs
  tracing: Add documentation for hwlat_detector tracer
  tracing: Added hardware latency tracer
  ftrace: Access ret_stack->subtime only in the function profiler
  function_graph: Handle TRACE_BPUTS in print_graph_comment
  tracing/uprobe: Drop isdigit() check in create_trace_uprobe