- 29 Jan, 2009 29 commits
-
-
Hans Verkuil authored
Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Hans Verkuil authored
Signed-off-by:
-
Mike Isely authored
The VIDIOC_QUERYCTRL command needs to actually do a queryctrl, not a querymenu. Similarly, the VIDIOC_QUERYMENU command needs to actually do a querymenu not a queryctrl. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Nicolas Fournier authored
The following patch adds support for a new version of the Terratec Cinergy DT USB XS Diversity Dual DVB-T TV tuner stick. The USB ID of the new stick is 0ccd:0081. The hardware of the stick has changed, when compared to the first version of this stick, but it still uses quite standard components, so that only minor changes are needed to the sources. The patch has been successfully tested with hotplugging the device and then 2 x tzap and 2 x mplayer, to watch two different TV programs simultaneously. The stick works with both, the old and new firmwares: - dvb-usb-dib0700-1.10.fw and - dvb-usb-dib0700-1.20.fw Signed-off-by:
Nicolas Fournier <nicolasfournier@yahoo.com> Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Andy Walls authored
On Fri, 2009-01-09 at 15:40 +0300, Goga777 wrote: > hI > > With today v4l-dvb I couldn't run my hvr4000 card on 2.6.27 kernel > [ 14.555162] cx88/2: cx2388x dvb driver version 0.0.6 loaded > [ 14.555231] cx88/2: registering cx8802 driver, type: dvb access: shared > [ 14.555303] cx88[0]/2: subsystem: 0070:6900, board: Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid [card=68] > [ 14.555374] cx88[0]/2: cx2388x based DVB/ATSC card > [ 14.555446] BUG: unable to handle kernel NULL pointer dereference at 00000000 > [ 14.555560] IP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4 > [ 14.555652] *pde = 00000000 > [ 14.555735] Oops: 0002 [#1] SMP > [ 14.555851] Modules linked in: cx88_dvb(+) cx88_vp3054_i2c videobuf_dvb wm8775 dvb_core tuner_simple tuner_types snd_seq_dummy tda9887 snd_seq_oss(+) snd_intel8x0(+) tda8290 snd_seq_midi snd_seq_midi_event snd_ac97_codec cx88_alsa(+) snd_seq ac97_bus snd_pcm_oss snd_mixer_oss snd_pcm snd_rawmidi snd_timer tuner snd_seq_device psmouse snd serio_raw ivtv(+) cx8800 cx8802 cx88xx soundcore cx2341x ir_common ns558 i2c_i801 v4l2_common videodev i2c_algo_bit gameport v4l1_compat snd_page_alloc tveeprom pcspkr floppy videobuf_dma_sg videobuf_core btcx_risc i2c_core parport_pc parport button intel_agp agpgart shpchp pci_hotplug rng_core iTCO_wdt sd_mod evdev usbhid hid ff_memless ext3 jbd mbcache ide_cd_mod cdrom ide_disk ata_piix libata dock 8139too usb_storage scsi_mod piix 8139cp mii ide_core uhci_hcd ehci_hcd usbcore thermal processor fan thermal_sys > [ 14.557013] > [ 14.557013] Pid: 2310, comm: modprobe Not tainted (2.6.27.1-custom-default1 #1) > [ 14.557013] EIP: 0060:[<c02e6bff>] EFLAGS: 00010246 CPU: 1 > [ 14.557013] EIP is at __mutex_lock_common+0x3c/0xe4 > [ 14.557013] EAX: de653e98 EBX: de739118 ECX: de739120 EDX: 00000000 > [ 14.557013] ESI: dd4209e0 EDI: de73911c EBP: de653eb0 ESP: de653e88 > [ 14.557013] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 > [ 14.557013] Process modprobe (pid: 2310, ti=de652000 task=dd4209e0 task.ti=de652000) > [ 14.557013] Stack: 3535352e 5d343733 00000002 de739120 de739120 00000000 c044a6c0 de739110 > [ 14.557013] de739118 00000001 de653ebc c02e6d38 c02e6b88 de653ec4 c02e6b88 de653ed8 > [ 14.557013] e1ac7115 de6a9000 00000001 00000000 de653f0c e1aeca62 de739004 de739000 > [ 14.557013] Call Trace: > [ 14.557013] [<c02e6d38>] ? __mutex_lock_slowpath+0x17/0x1a > [ 14.557013] [<c02e6b88>] ? mutex_lock+0x12/0x14 > [ 14.557013] [<c02e6b88>] ? mutex_lock+0x12/0x14 > [ 14.557013] [<e1ac7115>] ? videobuf_dvb_get_frontend+0x19/0x40 [videobuf_dvb] > [ 14.557013] [<e1aeca62>] ? cx8802_dvb_probe+0xc9/0x1945 [cx88_dvb] > [ 14.557013] [<e09ee41e>] ? cx8802_register_driver+0xbd/0x1ac [cx8802] > [ 14.557013] [<e09ee467>] ? cx8802_register_driver+0x106/0x1ac [cx8802] > [ 14.557013] [<e1aee37f>] ? dvb_init+0x22/0x27 [cx88_dvb] > [ 14.557013] [<c0101132>] ? _stext+0x42/0x11a > [ 14.557013] [<e1aee35d>] ? dvb_init+0x0/0x27 [cx88_dvb] > [ 14.557013] [<c013d2ca>] ? __blocking_notifier_call_chain+0xe/0x51 > [ 14.557013] [<c014970b>] ? sys_init_module+0x8c/0x17d > [ 14.557013] [<c0103b42>] ? syscall_call+0x7/0xb > [ 14.557013] [<c013007b>] ? round_jiffies_relative+0x14/0x16 > [ 14.557013] ======================= > [ 14.557013] Code: 78 04 89 f8 89 55 e0 64 8b 35 00 30 3f c0 e8 2e 0c 00 00 8d 43 08 89 45 e4 8b 53 0c 8d 45 e8 8b 4d e4 89 43 0c 89 4d e8 89 55 ec <89> 02 89 75 f0 83 c8 ff 87 03 48 74 55 8a 45 e0 8b 4d e0 83 e0 > [ 14.557013] EIP: [<c02e6bff>] __mutex_lock_common+0x3c/0xe4 SS:ESP 0068:de653e88 > [ 14.565211] ---[ end trace 94d8b014e067ac7b ]--- Tested and confirmed to work by several users at linux-media@vger.kernel.org Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Mauro Carvalho Chehab authored
Some em28xx devices use the PCM IN AC 97 PIN for digital audio. However, currently, the PCM IN selection is not set by the driver. This patch allows specifying the PCM IN expected output, via board description table. Signed-off-by: -
Trent Piepho authored
The zoran driver does a module_get/put of THIS_MODULE on device open/close. This isn't necessary as the kernel does this automatically. Clean up the failure path of zoran_open() somewhat. Make the dprintk()s on open/close a higher debug level and make the user count printed take the current open/close into account. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Trent Piepho authored
The driver should only use the kernel mapped io address, zr36057_mem, and not the PCI bus address, zr36057_adr. Since the latter is only printed out once, there is no need to save it in the driver data structure. There was some old code that looked like it was for the Alpha architecture which would use the PCI bus address. It probably no longer applies to modern kernels. Signed-off-by:
-
Trent Piepho authored
Instead of using custom code, just let the device layer look it up for us from the pci device table. This requires extending the pci device table to list each known card, plus a catch-all entry for the cards that don't have sub-system vendor/device data. Improve some of the info and error messages too. Signed-off-by:
-
Trent Piepho authored
The driver was keeping a global array with an entry for each zoran device probed. It was a leftover from when the driver didn't dynamically allocate the driver data for each device. There was only one use left, in the video device's ->open() method, looking up the struct zoran for the opened device from the minor number. This can be done better with video_get_drvdata(). Since zoran_num is now only used in the pci driver's ->probe() method, it doesn't need to be an atomic_t and be static. There is a race if multiple zoran cards could be probed at the same time, but currently the probe method for a given driver is single threaded. Signed-off-by:
-
Trent Piepho authored
When initializing a module parameter that is a per-card array, use "{ [0 ... (BUZ_MAX-1)] = -1 }" instead of "{ -1, -1, -1, -1 }". This way all of the entries will be correctly set to -1 if someone changes BUZ_MAX to a value other than 4. Adjust some of the parameter help text too. Signed-off-by: -
Andy Walls authored
When enabling a shared IRQ line, then saa7134_irq handler could be invoked before the driver had completely set up internal structures, due to a shared interrupt line firing. Clear the saa7134 interrupt status reg, before requesting the irq line, so that stale IRQ status isn't processed before the internal structures are set up. Marcin Slusarz recently brought this Oops to the attention of the v4l-dvb lists and provided an initial analysis by investigating reports found here: http://kerneloops.org/guilty.php?guilty=mute_input_7133&version=2.6.27-release&start=1802240&end=1835007&class=oopsReported-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by:
-
Andy Walls authored
Analog support for HVR-1250 has not been completed, but does exist for the HVR-1800. Since both cards use the same driver, it tries to create the analog dev for both devices, which is not possible. This causes a NULL error to show up in video_open and mpeg_open. -Mark Iterations through the cx23885_devlist must check for NULL pointers as some supported devices only have DVB support at the moment. Mark Jenks encoutered an Oops in a system with both an HVR-1250 and HVR-1800 installed. -Andy Reported-by:
Mark Jenks <mjenks1968@gmail.com> Tested-by:
-
Martin Dauskardt authored
Register 0x2d has to be set differently in the saa7129 compared to the saa7127. This was not done correctly, so S-Video was broken in certain circumstances. This fixes a regression introduced in 2.6.28. Signed-off-by:
Martin Dauskardt <martin.dauskardt@gmx.de> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Trent Piepho authored
This is a really old and crufty driver that wasn't using the long established pci driver framework. Signed-off-by:
-
Simon Harrison authored
v4lgrab breaks the fputc macro on some systems, because of #defined FILE. Also, I also added comments because it was not at all clear that to get gspca cameras to work with this application you need v4l1compat. Signed-off-by:
Simon Harrison <si1356@yahoo.co.uk> Signed-off-by:
-
Mauro Carvalho Chehab authored
If Hauppauge eeprom is corrupted, the driver returns tuner = 0, instead of TUNER_ABSENT. This makes the drivers to initialize tuner, instead of handling the manual parameter. Since the tuner core rejects that a tuner to have their type changed, this breaks the manual tuner override. Signed-off-by: -
Mauro Carvalho Chehab authored
Changeset 60b4bde4 removed an unused struct on zoran driver, when compiled with "Y". However, as pointed by Jean Delvare <khali@linux-fr.org>, this is neeeded when the driver is compiled as a module, since udev relies on it to auto-load the module. Signed-off-by:
-
Matthias Dahl authored
Concurrent access to a single DVB CA 50221 interface slot is generally discouraged. The underlying drivers (budget-av, budget-ci) do not implement proper locking and thus two transactions could (and do) interfere with on another. This fixes the following problems seen by others and myself: - sudden i/o errors when writing to the ci device which usually would result in an undefined state of the hw and require a software restart - errors about the CAM trying to send a buffer larger than the agreed size usually also resulting in an undefined state of the hw Due the to design of the DVB CA 50221 driver, implementing the locks in the underlying drivers would not be enough and still leave some race conditions, even though they were harder to trigger. Signed-off-by:
Matthias Dahl <devel@mortal-soul.de> Signed-off-by:
-
Sebastian Andrzej Siewior authored
to avoid: | tvp514x 0-005c: No platform data | !!<3>tvp514x 0-005d: No platform data Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Mauro Carvalho Chehab authored
Randy Dunlap <randy.dunlap@oracle.com> wrote: > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c: In function 'cx88_call_i2c_clients': > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:122: error: 'struct cx88_core' has no member named 'gate_ctrl' > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:123: error: 'struct cx88_core' has no member named 'gate_ctrl' > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:127: error: 'struct cx88_core' has no member named 'gate_ctrl' > linux-next-20090108/drivers/media/video/cx88/cx88-i2c.c:128: error: 'struct cx88_core' has no member named 'gate_ctrl' Signed-off-by: -
Laurent Pinchart authored
Commit 44f0079e erroneously considers all GET_DEF requests as unsuccessful. Fix this by checking the request return value. Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Laurent Pinchart authored
The UVC specification release number is a binary-coded decimal number, print it as such. Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Yusuf Altin authored
This patch introduces support for dvb-t for the following dibcom based card: Terratec Cinergy T Express (USB-ID: 0ccd:0062) Signed-off-by:
Yusuf Altin <yusuf.altin@t-online.de> Signed-off-by:
Albert Comerma <albert.comerma@gmail.com> Signed-off-by:
-
Huang Weiyi authored
Removed unused #include <version.h>'s in files below, drivers/media/video/cs5345.c drivers/media/video/pwc/pwc-if.c drivers/media/video/saa717x.c drivers/media/video/upd64031a.c drivers/media/video/upd64083.c drivers/media/video/uvc/uvc_ctrl.c drivers/media/video/uvc/uvc_driver.c drivers/media/video/uvc/uvc_queue.c drivers/media/video/uvc/uvc_video.c drivers/media/video/uvc/uvc_status.c Signed-off-by:
Huang Weiyi <weiyi.huang@gmail.com> Acked-by:
-
Mauro Carvalho Chehab authored
em28xx were trying to access the third input entry, even for boards that don't support it. This patch reviews the input mux selection fixing this bug and a few other troubles, like not validating the input on one userspace ioctl. Signed-off-by:
-
- 28 Jan, 2009 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/mm: Fix handling of _PAGE_COHERENT in BAT setup code powerpc/pseries: Correct VIO bus accounting problem in CMO env. powerpc: More printing warning fixes for the l64 to ll64 conversion powerpc: Remove arch/ppc cruft from Kconfig powerpc: Printing fix for l64 to ll64 conversion: phyp_dump.c powerpc/embedded6xx: Update defconfigs powerpc/8xx: Update defconfigs powerpc/86xx: Update defconfigs powerpc/83xx: Update defconfigs powerpc/85xx: Update defconfigs powerpc/mpc8313erdb: fix kernel panic because mdio device is not probed powerpc/4xx: Update multi-board PowerPC 4xx defconfigs powerpc/44x: Update PowerPC 44x defconfigs powerpc/40x: Update PowerPC 40x defconfigs powerpc/85xx: Fix typo in mpc8572ds dts powerpc/44x: Warp patches for the new NDFC driver powerpc/4xx: DTS: Add Add'l SDRAM0 Compatible and Interrupt Info
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68knommu: fix 5329 ColdFire periphal addressing uclinux: add process name to allocation error message m68knommu: correct the mii calculations for 532x ColdFire FEC m68knommu: add ColdFire M532x to the FEC configuration options m68knommu: fix syscall restarting m68knommu: remove the obsolete and long unused comempci chip support m68knommu: remove the no longer used PCI support option m68knommu: remove obsolete and unused eLIA board m68knommu: set NO_DMA m68knommu: fix cache flushing for the 527x ColdFire processors m68knommu: fix ColdFire 5272 serial baud rates in mcf.c m68knommu: use one exist from execption
-
Kumar Gala authored
Commit d7b1956f ("DMI: Introduce dmi_first_match to make the interface more flexible") introduced compile errors like the following when !CONFIG_DMI drivers/ata/sata_sil.c: In function 'sil_broken_system_poweroff': drivers/ata/sata_sil.c:713: error: implicit declaration of function 'dmi_first_match' drivers/ata/sata_sil.c:713: warning: initialization makes pointer from integer without a cast We just need a dummy version of dmi_first_match() to fix this all up. Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Anholt authored
Schedule a vblank signal, kill the process, and we'll go walking over freed memory. Given that no open-source userland exists using this, nor have I ever heard of a consumer, just let this code die. Signed-off-by:
Eric Anholt <eric@anholt.net> Requested-by:
Dave Airlie <airlied@linux.ie> Signed-off-by:
-
Gerhard Pircher authored
_PAGE_COHERENT is now always set in _PAGE_RAM resp. PAGE_KERNEL. Thus it has to be masked out, if the BAT mapping should be non cacheable or CPU_FTR_NEED_COHERENT is not set. This will work on normal SMP setups because we force-set CPU_FTR_NEED_COHERENT as part of CPU_FTR_COMMON on SMP. Signed-off-by:
Gerhard Pircher <gerhard_pircher@gmx.net> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Robert Jennings authored
In the VIO bus code the wrappers for dma alloc_coherent and free_coherent calls are rounding to IOMMU_PAGE_SIZE. Taking a look at the underlying calls, the actual mapping is promoted to PAGE_SIZE. Changing the rounding in these two functions fixes under-reporting the entitlement used by the system. Without this change, the system could run out of entitlement before it believes it has and incur mapping failures at the firmware level. Also in the VIO bus code, the wrapper for dma map_sg is not exiting in an error path where it should. Rather than fall through to code for the success case, this patch adds the return that is needed in the error path. Signed-off-by:
Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by:
-
Stephen Rothwell authored
These are all powerpc specific drivers. res.start in fsl_elbc_nand.c needs to be cast since it may be either 32 or 64 bit. Thanks to Scott Wood for noticing. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Arnd Bergmann <arnd@arndb.de> call_edac bits in particular Acked-by: Olof Johansson <olof@lixom.net> pasemi_nand peices Acked-by: Scott Wood <scottwood@freescale.com> fsl_elbc fixes Signed-off-by:
-
Josh Boyer authored
Remove some leftover cruft from the arch/ppc days Signed-off-by:
Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by:
-
Stephen Rothwell authored
Signed-off-by:
-
Benjamin Herrenschmidt authored
Manual merge of: arch/powerpc/configs/44x/warp_defconfig
-
