This is in preparation for more FTU controls to come.
Should help keeping names a bit shorter.
Signed-off-by: Felix Homann <linuxaudio@showlabor.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This adds db gain information to M-Audio Fast Track Ultra (8R) devices.
Signed-off-by: Felix Homann <linuxaudio@showlabor.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Rename mixer_vol_tlv to snd_usb_mixer_vol_tlv and export it to make
it reuseable in mixer_quirks.c.
Signed-off-by: Felix Homann <linuxaudio@showlabor.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge snd_maudio_ftu_create_ctl() and snd_ebox44_create_ctl() into
snd_create_std_mono_ctl().
As opposed to the ftu and ebox-44 specific functions, a TLV callback
can be specified for controls created by snd_create_std_mono_ctl().

[fixed minor checkpatch.pl warnings by tiwai]
Signed-off-by: Felix Homann <linuxaudio@showlabor.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Drop some struct members and definitions that became obsolete during
the refactorization of the driver.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Along with the IEC-60958 channel status word, CEA-861 Audio InfoFrames
are used in HDMI and DisplayPort to describe the parameters of the audio
stream. Hence, drivers for such devices may use these definitions to, for
instance, fill a CEA-861 data structure and pass it to a display driver
to configure an IP.
Signed-off-by: Ricardo Neri <ricardo.neri@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The mixer units from the firmware are corrupt, and even where they
are valid they presents mono controls as L and R channels of
stereo.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Some interfaces reference endpoints which do not exists. To
accomodate these, do not fail completely, but skip over them.

This allows the Electrix Ebox-44 with earlier firmware to be
detected and used for audio.
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Many fields have been moved to struct snd_usb_endpoint.
Also fix the proc output to correspond to the new structure.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ep->fill_max is a 1 bit flag, thus it has to be boolean.
  sound/usb/endpoint.c: In function 'snd_usb_endpoint_set_params':
  sound/usb/endpoint.c:785: warning: overflow in implicit constant conversion
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/usb/endpoint.c: In function ‘deactivate_urbs’:
sound/usb/endpoint.c:520:16: warning: unused variable ‘flags’ [-Wunused-variable]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Document the new streaming code and some of the functions so that
contributers can catch up easier.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Implicit feedback is a streaming mode that does not rely on dedicated
sync endpoints but uses the information provided by record streams to
clock output streams. Now that the streaming logic is decoupled from the
PCM streams, this is easy to implement.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

With the previous commit that added the new streaming model, all
endpoint and streaming related code is now in endpoint.c, and pcm.c
only acts as a wrapper for handling the packet's payload.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This patch adds a new generic streaming logic for audio over USB.

It defines a model (snd_usb_endpoint) that handles everything that
is related to an USB endpoint and its streaming. There are functions to
activate and deactivate an endpoint (which call usb_set_interface()),
and to start and stop its URBs. It also has function pointers to be
called when data was received or is about to be sent, and pointer to
a sync slave (another snd_usb_endpoint) that is informed when data has
been received.

A snd_usb_endpoint knows about its state and implements a refcounting,
so only the first user will actually start the URBs and only the last
one to stop it will tear them down again.

With this sort of abstraction, the actual streaming is decoupled from
the pcm handling, which makes the "implicit feedback" mechanisms easy to
implement.

In order to split changes properly, this patch only adds the new
implementation but leaves the old one around, so the the driver doesn't
change its behaviour. The switch to actually use the new code is
submitted separately.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This is needed for new card-wide list operations.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

release_firmware() deals gracefully with NULL pointers, no need to check first.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

At the point of this error-handling code, both regions and the dma have
been allocated, so free it as done in previous and subsequent
error-handling code.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

At the point of this error-handling code, HAVE_DSPCODEH may be undefined,
so free INITCODE and PERMCODE as done elsewhere.  A jump and label are
introduced to avoid code duplication.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ASoC: fixes for 3.4

A bunch of driver-specific fixes and one generic fix for the new support
for platform DAPM contexts - we were picking the wrong default for the
idle_bias_off setting which was meaning we weren't actually achieving
any useful runtime PM on platform devices.

name pins consistently (MIC1/LINE1/HP-OUT/CD) on all controls
affecting those pins.

remove duplicate SET_AMP_GAIN_MUTE to 0x17/index 0 and 0x17/index 1

really select MIC1, not Mixer out for recording

"Mixer out" for recording is not a "pin", adjust comment
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

CX20549 (ctx5045) doesn't accept data on index 1 for output pins,
as shown in the following hda-var transaction:

  $ hda-verb /dev/snd/hwC0D0 0x10 set_amp_gain 0xb126
  nid = 0x10, verb = 0x300, param = 0xb126
  value = 0x0
  $ hda-verb /dev/snd/hwC0D0 0x10 get_amp_gain 0x8001
  nid = 0x10, verb = 0xb00, param = 0x8001
  value = 0x0
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The ID used for detection of the BenQ R55E actually identifies the
Quanta TW3 ODM design, which is also used for the Gigabyte W551 laptop
series. Schematics on the internet clearly indicate that the "Port C"
(analog input connected to record source #4 and mixer input #4) is
unconnected.

Playing an audio CD through analog playback (using cdplay from cdtools)
produces no sound, even with the mixer input labelled "CD" enabled, and
the volume control in the CD drive set to maximum. This indicates the
connection is really not present.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The "input converter" widget of the CX20459 has only one input amplifier,
expose that one as "Capture Volume/Capture Switch". The actual record
source selection is already exposed through the separately installed
input mux.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This includes renaming "Line In" to line, also in the mixer settings.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The CX20549 has only one single input amp on it's input converter
widget. Fix printing of values in the codec file in /proc/asound.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Commit d4a2eca7 "ASoC: Tegra I2S: Remove dependency on pdev->id" changed
the prototype of tegra_i2s_debug_add, but didn't update the dummy inline
used when !CONFIG_DEBUG_FS. Fix that.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: <stable@vger.kernel.org> # 3.3

The ASoC core currently defaults to using STANDBY rather than OFF for
idle ASoC platform devices, which causes a permanent pm_runtime_get() on
them. This keeps the device active unnecessarily. This can be especially
problematic when the ASoC platform device and DAI device are the same
device.

The distinction between OFF and STANDBY is likely not relevant for ASoC
platform drivers, since they aren't analog devices. So, solve this issue
by hard-coding idle_bias_off = 1 for all ASoC platform devices. If this
turns out to be a problem, this value could be sourced from the
snd_soc_platform_driver, similarly to soc_probe_codec().

Note: Prior to this change, this caused a large (10) runtime_active count
for the Tegra I2S controller even when not in use, and a leak in that
value as streams were started and stopped. This change probably hides a
bug.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Check for NULL pointer before accessing it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Doing a 'cat /sys/kernel/debug/audmux/ssi7' causes the following oops to be printed by the kernel:

Uhandled fault: external abort on non-linefetch (0x008) at 0xf53b003c
Internal error: : 8 [#1] PREEMPT
Modules linked in:
CPU: 0    Not tainted  (3.3.0-00033-gecc726e-dirty #307)
PC is at audmux_read_file+0x68/0x2f4
LR is at clk_enable+0x3c/0x48
pc : [<c001b8c8>]   lr : [<c00190a0>]    psr: a0000013
sp : c3ad3f38  ip : c30a4000  fp : 00000003
r10: 00001000  r9 : be83fb00  r8 : c3ad3f80
r7 : c3ad3f80  r6 : 00000007  r5 : 00031010  r4 : c30a5000
r3 : f53b0000  r2 : 0000003c  r1 : 380fa100  r0 : c068dda0
Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005317f  Table: 83034000  DAC: 00000015
Process cat (pid: 1042, stack limit = 0xc3ad2270)
Stack: (0xc3ad3f38 to 0xc3ad4000)
3f20:                                                      c3139180 00000000
3f40: c3bc6500 00001000 be83fb00 c3ad3f80 00001000 c3ad2000 00000000 c0095f3c
3f60: 00000003 c3bc6508 c3bc6500 be83fb00 00000000 00000000 00001000 c0096010
3f80: 00000000 00000000 b6fe2050 00000000 00001000 be83fb00 00000003 00000003
3fa0: c000eb88 c000e9e0 00001000 be83fb00 00000003 be83fb00 00001000 00000000
3fc0: 00001000 be83fb00 00000003 00000003 00000001 00000001 00000000 00000003
3fe0: 000bec8c be83fae0 0000f808 b6ea8d5c 60000010 00000003 7dff7ede 749bedf1
[<c001b8c8>] (audmux_read_file+0x68/0x2f4) from [<c0095f3c>] (vfs_read+0xb0/0x144)
[<c0095f3c>] (vfs_read+0xb0/0x144) from [<c0096010>] (sys_read+0x40/0x70)
[<c0096010>] (sys_read+0x40/0x70) from [<c000e9e0>] (ret_fast_syscall+0x0/0x2c)
Code: e1a02186 e2822004 e3500000 e7935186 (e7937002)
---[ end trace 4d046e31309023de ]---

Fix the ssi port numbers in sysfs to fix this problem.
Reported-by: Joan Carles <joancarles@fqingenieria.es>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

ak4642 out_tlv is +12.0dB to -115.0 dB, and it supports mute.
But current settings didn't care +1 step for mute.
This patch adds it
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Rather than listing every single person who works on the drivers include
the mailing list where they can all be found.  Leave myself as a human
contact.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Peter Ujfalusi has been co-maintaining sound/soc/omap/ for years but
was missing from this MAINTAINERS entry.
Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

* fixes
  sound/soc/pxa/pxa2xx-i2s.c:86:2: error: implicit declaration of function 'IOMEM' [-Werror=implicit-function-declaration]
  sound/soc/pxa/pxa2xx-i2s.c:86:2: error: initializer element is not constant
  after 23019a73 removed IOMEM
  definition from arch/arm/mach-pxa/include/mach/hardware.h
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Debugfs files could be accessed any time, so explicitly enable clocks
when reading registers to generate debugfs file content.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

As manual described, VAG is an internal voltage reference of DAC/ADC,
So enabled it before DAC/ADC up.

One more thing should care about is VAG fully ramped down requires 400ms,
wait it to avoid pop.
Signed-off-by: Zeng Zhaoming <zengzm.kernel@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>