Pull ARM SoC updates from Olof Johansson:
 "This contains the bulk of new SoC development for this merge window.

  Two new platforms have been added, the sunxi platforms (Allwinner A1x
  SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
  series of ARMv7 platforms from them, where the hope is that we can
  keep the platform code generic enough to have them all share one mach
  directory.  The new Broadcom platform is contributed by Christian
  Daudt.

  Highbank has grown support for Calxeda's next generation of hardware,
  ECX-2000.

  clps711x has seen a lot of cleanup from Alexander Shiyan, and he's
  also taken on maintainership of the platform.

  Beyond this there has been a bunch of work from a number of people on
  converting more platforms to IRQ domains, pinctrl conversion, cleanup
  and general feature enablement across most of the active platforms."

Fix up trivial conflicts as per Olof.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits)
  mfd: vexpress-sysreg: Remove LEDs code
  irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids
  clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids
  irq: versatile: delete dangling variable
  ARM: sunxi: add missing include for mdelay()
  ARM: EXYNOS: Avoid early use of of_machine_is_compatible()
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  ARM: sunxi: Add missing sun4i.dtsi file
  pinctrl: samsung: Do not initialise statics to 0
  ARM i.MX6: remove gate_mask from pllv3
  ARM i.MX6: Fix ethernet PLL clocks
  ARM i.MX6: rename PLLs according to datasheet
  ARM i.MX6: Add pwm support
  ARM i.MX51: Add pwm support
  ARM i.MX53: Add pwm support
  ARM: mx5: Replace clk_register_clkdev with clock DT lookup
  ...

Pull ARM SoC cleanups on various subarchitectures from Olof Johansson:
 "Cleanup patches for various ARM platforms and some of their associated
  drivers.  There's also a branch in here that enables Freescale i.MX to
  be part of the multiplatform support -- the first "big" SoC that is
  moved over (more multiplatform work comes in a separate branch later
  during the merge window)."

Conflicts fixed as per Olof, including a silent semantic one in
arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to
omap3xxx_restart(), and a new user of the old name was added).

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits)
  ARM: omap: fix typo on timer cleanup
  ARM: EXYNOS: Remove unused regs-mem.h file
  ARM: EXYNOS: Remove unused non-dt support for dwmci controller
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: SAMSUNG: use devm_ functions for ADC driver
  ARM: EXYNOS: no duplicate mask/unmask in eint0_15
  ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443
  ARM: EXYNOS: Remove i2c0 resource information and setting of device names
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes
  ARM: integrator: use BUG_ON where possible
  ARM: integrator: push down SC dependencies
  ARM: integrator: delete static UART1 mapping
  ARM: integrator: delete SC mapping on the CP
  ARM: integrator: remove static CP syscon mapping
  ARM: integrator: remove static AP syscon mapping
  ...

Pull ARM SoC Header cleanups from Olof Johansson:
 "This is a collection of header file cleanups, mostly for OMAP and
  AT91, that keeps moving the platforms in the direction of
  multiplatform by removing the need for mach-dependent header files
  used in drivers and other places."

Fix up mostly trivial conflicts as per Olof.

* tag 'headers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (106 commits)
  ARM: OMAP2+: Move iommu/iovmm headers to platform_data
  ARM: OMAP2+: Make some definitions local
  ARM: OMAP2+: Move iommu2 to drivers/iommu/omap-iommu2.c
  ARM: OMAP2+: Move plat/iovmm.h to include/linux/omap-iommu.h
  ARM: OMAP2+: Move iopgtable header to drivers/iommu/
  ARM: OMAP: Merge iommu2.h into iommu.h
  atmel: move ATMEL_MAX_UART to platform_data/atmel.h
  ARM: OMAP: Remove omap_init_consistent_dma_size()
  arm: at91: move at91rm9200 rtc header in drivers/rtc
  arm: at91: move reset controller header to arm/arm/mach-at91
  arm: at91: move pit define to the driver
  arm: at91: move at91_shdwc.h to arch/arm/mach-at91
  arm: at91: move board header to arch/arm/mach-at91
  arn: at91: move at91_tc.h to arch/arm/mach-at91
  arm: at91 move at91_aic.h to arch/arm/mach-at91
  arm: at91 move board.h to arch/arm/mach-at91
  arm: at91: move platfarm_data to include/linux/platform_data/atmel.h
  arm: at91: drop machine defconfig
  ARM: OMAP: Remove NEED_MACH_GPIO_H
  ARM: OMAP: Remove unnecessary mach and plat includes
  ...

Pull ARM SoC Non-critical bug fixes from Olof Johansson:
 "Simple bug fixes that were not considered important enough for
  inclusion into 3.7, especially those that arrived late during the
  merge window.

  There's also a MAINTAINERS update for the Renesas platforms in here,
  marking Simon Horman as a maintainer and changing the git url to his
  tree."

* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  Update ARM/SHMOBILE section of MAINTAINERS
  ARM: Fix Kconfig symbols typo for LEDS
  ARM: pxa: add dummy SA1100 rtc clock in pxa25x
  ARM: pxa: fix pxa25x gpio wakeup setting
  ARM: OMAP4: PM: fix errata handling when CONFIG_PM=n
  ARM: cns3xxx: drop unnecessary symbol selection
  ARM: vexpress: fix ll debug code when building multiplatform
  ARM: OMAP4: retrigger localtimers after re-enabling gic
  ARM: OMAP4460: Workaround for ROM bug because of CA9 r2pX GIC control register change.
  ARM: OMAP4: PM: add errata support
  ARM: davinci: fix return value check by using IS_ERR in tnetv107x_devices_init()
  ARM: davinci: uncompress.h: bail out if uart not initialized
  ARM: davinci: serial.h: fix uart number in the comment
  ARM: davinci: dm644x evm: move pointer dereference below NULL check
  ARM: vexpress: Make the debug UART detection more specific

Pull ARM updates from Russell King:
 "Here's the updates for ARM for this merge window, which cover quite a
  variety of areas.

  There's a bunch of patch series from Will tackling various bugs like
  the PROT_NONE handling, ASID allocation, cluster boot protocol and
  ASID TLB tagging updates.

  We move to a build-time sorted exception table rather than doing the
  sorting at run-time, add support for the secure computing filter, and
  some updates to the perf code.  We also have sorted out the placement
  of some headers, fixed some build warnings, fixed some hotplug
  problems with the per-cpu TWD code."

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits)
  ARM: 7594/1: Add .smp entry for REALVIEW_EB
  ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below
  ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets.
  ARM: 7595/1: syscall: rework ordering in syscall_trace_exit
  ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep
  ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch.
  ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU
  ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses
  ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6
  ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only
  ARM: 7587/1: implement optimized percpu variable access
  ARM: 7589/1: integrator: pass the lm resource to amba
  ARM: 7588/1: amba: create a resource parent registrator
  ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM
  ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init
  ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected
  ARM: gic: use a private mapping for CPU target interfaces
  ARM: kernel: add logical mappings look-up
  ARM: kernel: add cpu logical map DT init in setup_arch
  ARM: kernel: add device tree init map function
  ...

Pull CIFS fixes from Steve French:
 "This includes a set of misc.  cifs fixes (most importantly some byte
  range lock related write fixes from Pavel, and some ACL and idmap
  related fixes from Jeff) but also includes the SMB2.02 dialect
  enablement, and a key fix for SMB3 mounts.

  Default authentication upgraded to ntlmv2 for cifs (it was already
  ntlmv2 for smb2)"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (43 commits)
  CIFS: Fix write after setting a read lock for read oplock files
  cifs: parse the device name into UNC and prepath
  cifs: fix up handling of prefixpath= option
  cifs: clean up handling of unc= option
  cifs: fix SID binary to string conversion
  fix "disabling echoes and oplocks" on SMB2 mounts
  Do not send SMB2 signatures for SMB3 frames
  cifs: deal with id_to_sid embedded sid reply corner case
  cifs: fix hardcoded default security descriptor length
  cifs: extra sanity checking for cifs.idmap keys
  cifs: avoid extra allocation for small cifs.idmap keys
  cifs: simplify id_to_sid and sid_to_id mapping code
  CIFS: Fix possible data coherency problem after oplock break to None
  CIFS: Do not permit write to a range mandatory locked with a read lock
  cifs: rename cifs_readdir_lookup to cifs_prime_dcache and make it void return
  cifs: Add CONFIG_CIFS_DEBUG and rename use of CIFS_DEBUG
  cifs: Make CIFS_DEBUG possible to undefine
  SMB3 mounts fail with access denied to some servers
  cifs: Remove unused cEVENT macro
  cifs: always zero out smb_vol before parsing options
  ...

Pull xfs update from Ben Myers:
 "There is plenty going on, including the cleanup of xfssyncd, metadata
  verifiers, CRC infrastructure for the log, tracking of inodes with
  speculative allocation, a cleanup of xfs_fs_subr.c, fixes for
  XFS_IOC_ZERO_RANGE, and important fix related to log replay (only
  update the last_sync_lsn when a transaction completes), a fix for
  deadlock on AGF buffers, documentation and comment updates, and a few
  more cleanups and fixes.

  Details:
   - remove the xfssyncd mess
   - only update the last_sync_lsn when a transaction completes
   - zero allocation_args on the kernel stack
   - fix AGF/alloc workqueue deadlock
   - silence uninitialised f.file warning
   - Update inode alloc comments
   - Update mount options documentation
   - report projid32bit feature in geometry call
   - speculative preallocation inode tracking
   - fix attr tree double split corruption
   - fix broken error handling in xfs_vm_writepage
   - drop buffer io reference when a bad bio is built
   - add more attribute tree trace points
   - growfs infrastructure changes for 3.8
   - fs/xfs/xfs_fs_subr.c die die die
   - add CRC infrastructure
   - add CRC checks to the log
   - Remove description of nodelaylog mount option from xfs.txt
   - inode allocation should use unmapped buffers
   - byte range granularity for XFS_IOC_ZERO_RANGE
   - fix direct IO nested transaction deadlock
   - fix stray dquot unlock when reclaiming dquots
   - fix sparse reported log CRC endian issue"

Fix up trivial conflict in fs/xfs/xfs_fsops.c due to the same patch
having been applied twice (commits eaef8543 and 1375cb65: "xfs:
growfs: don't read garbage for new secondary superblocks") with later
updates to the affected code in the XFS tree.

* tag 'for-linus-v3.8-rc1' of git://oss.sgi.com/xfs/xfs: (78 commits)
  xfs: fix sparse reported log CRC endian issue
  xfs: fix stray dquot unlock when reclaiming dquots
  xfs: fix direct IO nested transaction deadlock.
  xfs: byte range granularity for XFS_IOC_ZERO_RANGE
  xfs: inode allocation should use unmapped buffers.
  xfs: Remove the description of nodelaylog mount option from xfs.txt
  xfs: add CRC checks to the log
  xfs: add CRC infrastructure
  xfs: convert buffer verifiers to an ops structure.
  xfs: connect up write verifiers to new buffers
  xfs: add pre-write metadata buffer verifier callbacks
  xfs: add buffer pre-write callback
  xfs: Add verifiers to dir2 data readahead.
  xfs: add xfs_da_node verification
  xfs: factor and verify attr leaf reads
  xfs: factor dir2 leaf read
  xfs: factor out dir2 data block reading
  xfs: factor dir2 free block reading
  xfs: verify dir2 block format buffers
  xfs: factor dir2 block read operations
  ...

Pull dlm updates from David Teigland:
 "This set fixes some conditions in which value blocks are invalidated,
  and includes two trivial cleanups."

* tag 'dlm-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: fix lvb invalidation conditions
  fs/dlm: remove CONFIG_EXPERIMENTAL
  dlm: remove unused variable in *dlm_lowcomms_get_buffer()

Pull cgroup changes from Tejun Heo:
 "A lot of activities on cgroup side.  The big changes are focused on
  making cgroup hierarchy handling saner.

   - cgroup_rmdir() had peculiar semantics - it allowed cgroup
     destruction to be vetoed by individual controllers and tried to
     drain refcnt synchronously.  The vetoing never worked properly and
     caused good deal of contortions in cgroup.  memcg was the last
     reamining user.  Michal Hocko removed the usage and cgroup_rmdir()
     path has been simplified significantly.  This was done in a
     separate branch so that the memcg people can base further memcg
     changes on top.

   - The above allowed cleaning up cgroup lifecycle management and
     implementation of generic cgroup iterators which are used to
     improve hierarchy support.

   - cgroup_freezer updated to allow migration in and out of a frozen
     cgroup and handle hierarchy.  If a cgroup is frozen, all descendant
     cgroups are frozen.

   - netcls_cgroup and netprio_cgroup updated to handle hierarchy
     properly.

   - Various fixes and cleanups.

   - Two merge commits.  One to pull in memcg and rmdir cleanups (needed
     to build iterators).  The other pulled in cgroup/for-3.7-fixes for
     device_cgroup fixes so that further device_cgroup patches can be
     stacked on top."

Fixed up a trivial conflict in mm/memcontrol.c as per Tejun (due to
commit bea8c150 ("memcg: fix hotplugged memory zone oops") in master
touching code close to commit 2ef37d3f ("memcg: Simplify
mem_cgroup_force_empty_list error handling") in for-3.8)

* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (65 commits)
  cgroup: update Documentation/cgroups/00-INDEX
  cgroup_rm_file: don't delete the uncreated files
  cgroup: remove subsystem files when remounting cgroup
  cgroup: use cgroup_addrm_files() in cgroup_clear_directory()
  cgroup: warn about broken hierarchies only after css_online
  cgroup: list_del_init() on removed events
  cgroup: fix lockdep warning for event_control
  cgroup: move list add after list head initilization
  netprio_cgroup: allow nesting and inherit config on cgroup creation
  netprio_cgroup: implement netprio[_set]_prio() helpers
  netprio_cgroup: use cgroup->id instead of cgroup_netprio_state->prioidx
  netprio_cgroup: reimplement priomap expansion
  netprio_cgroup: shorten variable names in extend_netdev_table()
  netprio_cgroup: simplify write_priomap()
  netcls_cgroup: move config inheritance to ->css_online() and remove .broken_hierarchy marking
  cgroup: remove obsolete guarantee from cgroup_task_migrate.
  cgroup: add cgroup->id
  cgroup, cpuset: remove cgroup_subsys->post_clone()
  cgroup: s/CGRP_CLONE_CHILDREN/CGRP_CPUSET_CLONE_CHILDREN/
  cgroup: rename ->create/post_create/pre_destroy/destroy() to ->css_alloc/online/offline/free()
  ...

Pull percpu changes from Tejun Heo:
 "Nothing exciting here either.  Joonsoo's is almost cosmetic.  Cyrill's
  patch fixes "percpu_alloc" early kernel param handling so that the
  kernel doesn't crash when the parameter is specified w/o any argument."

* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  mm, percpu: Make sure percpu_alloc early parameter has an argument
  percpu: make pcpu_free_chunk() use pcpu_mem_free() instead of kfree()

Pull workqueue changes from Tejun Heo:
 "Nothing exciting.  Just two trivial changes."

* 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: add WARN_ON_ONCE() on CPU number to wq_worker_waking_up()
  workqueue: trivial fix for return statement in work_busy()

Pull thermal management update from Zhang Rui:
 "Highlights:

   - Introduction of thermal policy support, together with three new
     thermal governors, including step_wise, user_space, fire_share.

   - Introduction of ST-Ericsson db8500_thermal driver and ST-Ericsson
     db8500_cpufreq_cooling driver.

   - Thermal Kconfig file and Makefile refactor.

   - Fixes for generic thermal layer, generic cpucooling, rcar thermal
     driver and Exynos thermal driver."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (36 commits)
  Thermal: Fix DEFAULT_THERMAL_GOVERNOR
  Thermal: fix a NULL pointer dereference when generic thermal layer is built as a module
  thermal: rcar: add rcar_zone_to_priv() macro
  thermal: rcar: fixup the unit of temperature
  thermal: cpu cooling: allow module builds
  thermal: cpu cooling: use const parameter while registering
  Thermal: Add ST-Ericsson DB8500 thermal properties and platform data.
  Thermal: Add ST-Ericsson DB8500 thermal driver.
  drivers/thermal/Makefile refactor
  Exynos: Add missing dependency
  Refactor drivers/thermal/Kconfig
  thermal: cpu_cooling: Make 'notify_device' static
  Thermal: Remove the cooling_cpufreq_list.
  Thermal: fix bug of counting cpu frequencies.
  Thermal: add indent for code alignment.
  thermal: rcar_thermal: remove explicitly used devm_kfree/iounap()
  thermal: user_space: Add missing static storage class specifiers
  thermal: fair_share: Add missing static storage class specifiers
  thermal: step_wise: Add missing static storage class specifiers
  Thermal: Fix oops and unlocking in thermal_sys.c
  ...

Pull regmap updates from Mark Brown:
 "Quite a few enhancements this time around, helpers and diagnostics for
  the most part which is good to see:

   - Addition of table based lookups for the register access checks from
     Davide Ciminaghi, making life easier for drivers with big blocks of
     similar registers.
   - Allow drivers to get the irqdomain for regmap irq_chips, allowing
     the domain to be used with other APIs.
   - Debug improvements for paged register maps.
   - Performance improvments for some of the diagnostic infrastructure,
     very helpful for devices with large register maps."

* tag 'regmap-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: debugfs: Cache offsets of valid regions for dump
  regmap: debugfs: Factor out initial seek
  regmap: debugfs: Avoid overflows for very small reads
  regmap: Cache register and value sizes for debugfs
  regmap: introduce tables for readable/writeable/volatile/precious checks
  regmap: core: Report registers in hex when we can't cache
  regmap: Fix printing of size_t variable
  regmap: make lock/unlock functions customizable
  regmap: silence GCC warning
  regmap: Split raw writes that cross window boundaries
  regmap: Make return code checks consistent
  regmap: Factor range lookup out of page selection
  regmap: Provide debugfs read of register ranges
  regmap: Factor out debugfs register read
  regmap: Allow ranges to be named
  regmap: When we sanity check during range adds say what errors we find
  regmap: Rename n_ranges to num_ranges
  regmap: irq: Allow users to retrieve the irq_domain

Pull ACPI5 error injection fix from Tony Luck:
 "Trivial fix for error injection code using ACPI5 version of EINJ"

* tag 'please-pull-einj-fix-for-acpi5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  ACPI, APEI, EINJ: Add missed ACPI5 support for error trigger table

Pull pstore fixes from Tony Luck:
 "Patch series to allow EFI variable backend to pstore to hold multiple
  records."

* tag 'please-pull-pstore_mevent' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  efi_pstore: Add a format check for an existing variable name at erasing time
  efi_pstore: Add a format check for an existing variable name at reading time
  efi_pstore: Add a sequence counter to a variable name
  efi_pstore: Add ctime to argument of erase callback
  efi_pstore: Remove a logic erasing entries from a write callback to hold multiple logs
  efi_pstore: Add a logic erasing entries to an erase callback
  efi_pstore: Check remaining space with QueryVariableInfo() before writing data

Pull ia64 fix from Tony Luck:
 "Miscellaneous ia64 fix for 3.8.  Just need to avoid a pending
  namespace collision from other work being merged."

* tag 'please-pull-misc-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Resolve name space collision for cache_show()

Pull ARM64 updates from Catalin Marinas:

 - Generic execve, kernel_thread, fork/vfork/clone.

 - Preparatory patches for KVM support (initialising EL2 mode for later
   installing KVM support, hypervisor stub).

 - Signal handling corner case fix (alternative signal stack set up for
   a SEGV handler, which is raised in response to RLIMIT_STACK being
   reached).

 - Sub-nanosecond timer error fix.

* tag 'arm64-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: (30 commits)
  arm64: Update the MAINTAINERS entry
  arm64: compat for clock_adjtime(2) is miswired
  arm64: move FP-SIMD save/restore code to a macro
  arm64: hyp: initialize vttbr_el2 to zero
  arm64: add hypervisor stub
  arm64: record boot mode when entering the kernel
  arm64: move vector entry macro to assembler.h
  arm64: add AArch32 execution modes to ptrace.h
  arm64: expand register mapping between AArch32 and AArch64
  arm64: generic timer: use virtual counter instead of physical at EL0
  arm64: vdso: defer shifting of nanosecond component of timespec
  arm64: vdso: rework __do_get_tspec register allocation and return shift
  arm64: vdso: check sequence counter even for coarse realtime operations
  arm64: vdso: fix clocksource mask when extracting bottom 56 bits
  ARM64: Remove incorrect Kconfig symbol HAVE_SPARSE_IRQ
  Documentation: Fixes a word in Documentation/arm64/memory.txt
  arm64: Make !dirty ptes read-only
  arm64: Convert empty flush_cache_{mm,page} functions to static inline
  arm64: signal: let the compiler inline compat_get_sigframe
  arm64: signal: return struct rt_sigframe from get_sigframe
  ...

Conflicts:
	arch/arm64/include/asm/unistd32.h

Pull ARM OMAP serial updates from Russell King:
 "This series is a major reworking of the OMAP serial driver code fixing
  various bugs in the hardware-assisted flow control, extending up into
  serial_core for a couple of issues.  These fixes have been done as a
  set of progressive changes and transformations in the hope that no new
  bugs will be introduced by this series.

  The problems are many-fold, from the driver not being informed about
  updated settings, to the driver not knowing what the intentions of the
  upper layers are.

  The first four patches tackle the serial_core layer, allowing it to
  provide the necessary information to drivers, and the remaining
  patches allow the OMAP serial driver to take advantage of this.

  This brings hardware assisted RTS/CTS and XON/OFF flow control into a
  useful state.

  These patches have been in linux-next for most of the last cycle;
  indeed they predate the previous merge window.  They've also been
  posted to the OMAP people."

* 'omap-serial' of git://git.linaro.org/people/rmk/linux-arm: (21 commits)
  SERIAL: omap: fix hardware assisted flow control
  SERIAL: omap: simplify (2)
  SERIAL: omap: move xon/xoff setting earlier
  SERIAL: omap: always set TCR
  SERIAL: omap: simplify
  SERIAL: omap: don't read back LCR/MCR/EFR
  SERIAL: omap: serial_omap_configure_xonxoff() contents into set_termios
  SERIAL: omap: configure xon/xoff before setting modem control lines
  SERIAL: omap: remove OMAP_UART_SYSC_RESET and OMAP_UART_FIFO_CLR
  SERIAL: omap: move driver private definitions and structures to driver
  SERIAL: omap: remove 'irq_pending' bitfield
  SERIAL: omap: fix MCR TCRTLR bit handling
  SERIAL: omap: fix set_mctrl() breakage
  SERIAL: omap: no need to re-read EFR
  SERIAL: omap: remove setting of EFR SCD bit
  SERIAL: omap: allow hardware assisted IXANY mode to be disabled
  SERIAL: omap: allow hardware assisted rts/cts modes to be disabled
  SERIAL: core: add throttle/unthrottle callbacks for hardware assisted flow control
  SERIAL: core: add hardware assisted h/w flow control support
  SERIAL: core: add hardware assisted s/w flow control support
  ...

Conflicts:
	drivers/tty/serial/omap-serial.c

Fix DEFAULT_THERMAL_GOVERNOR to be consistant with the
default governor selected in kernel config file.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

[   12.761956] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
[   12.762016] IP: [<ffffffffa0005277>] handle_thermal_trip+0x47/0x130 [thermal_sys]
[   12.762060] PGD 1fec74067 PUD 1fee5b067 PMD 0
[   12.762127] Oops: 0000 [#1] SMP
[   12.762177] Modules linked in: hid_generic crc32c_intel usbhid hid firewire_ohci(+) e1000e(+) firewire_core crc_itu_t xhci_hcd(+) thermal(+) fan thermal_sys hwmon
[   12.762423] CPU 1
[   12.762443] Pid: 187, comm: modprobe Tainted: G       A     3.7.0-thermal-module+ #25                  /DH77DF
[   12.762496] RIP: 0010:[<ffffffffa0005277>]  [<ffffffffa0005277>] handle_thermal_trip+0x47/0x130 [thermal_sys]
[   12.762682] RSP: 0018:ffff8801fe7ddc18  EFLAGS: 00010282
[   12.762704] RAX: 0000000000000000 RBX: ffff8801ff3e9c00 RCX: ffff8801fdc39800
[   12.762728] RDX: ffff8801fe7ddc24 RSI: 0000000000000001 RDI: ffff8801ff3e9c00
[   12.762764] RBP: ffff8801fe7ddc48 R08: 0000000004000000 R09: ffffffffa001f568
[   12.762797] R10: ffffffff81363083 R11: 0000000000000001 R12: 0000000000000001
[   12.762832] R13: 0000000000000000 R14: 0000000000000001 R15: ffff8801fde73e68
[   12.762866] FS:  00007f5548516700(0000) GS:ffff88021f240000(0000) knlGS:0000000000000000
[   12.762912] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   12.762946] CR2: 0000000000000018 CR3: 00000001fefe2000 CR4: 00000000001407e0
[   12.762979] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   12.763014] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   12.763048] Process modprobe (pid: 187, threadinfo ffff8801fe7dc000, task ffff8801fe5bdb40)
[   12.763095] Stack:
[   12.763122]  0000000000019640 00000000fdc39800 ffff8801fe7ddc48 ffff8801ff3e9c00
[   12.763225]  0000000000000002 0000000000000000 ffff8801fe7ddc78 ffffffffa00053e7
[   12.763338]  ffff8801ff3e9c00 0000000000006c98 ffffffffa0007480 ffff8801ff3e9c00
[   12.763440] Call Trace:
[   12.763470]  [<ffffffffa00053e7>] thermal_zone_device_update+0x77/0xa0 [thermal_sys]
[   12.763515]  [<ffffffffa0006d38>] thermal_zone_device_register+0x788/0xa88 [thermal_sys]
[   12.763562]  [<ffffffffa001f394>] acpi_thermal_add+0x360/0x4c8 [thermal]
[   12.763598]  [<ffffffff8133902a>] acpi_device_probe+0x50/0x190
[   12.763632]  [<ffffffff811bd793>] ? sysfs_create_link+0x13/0x20
[   12.763666]  [<ffffffff813cc41b>] driver_probe_device+0x7b/0x240
[   12.763699]  [<ffffffff813cc68b>] __driver_attach+0xab/0xb0
[   12.763732]  [<ffffffff813cc5e0>] ? driver_probe_device+0x240/0x240
[   12.763766]  [<ffffffff813ca836>] bus_for_each_dev+0x56/0x90
[   12.763799]  [<ffffffff813cbf4e>] driver_attach+0x1e/0x20
[   12.763831]  [<ffffffff813cbac0>] bus_add_driver+0x190/0x290
[   12.763864]  [<ffffffffa0022000>] ? 0xffffffffa0021fff
[   12.763896]  [<ffffffff813ccbea>] driver_register+0x7a/0x160
[   12.763928]  [<ffffffffa0022000>] ? 0xffffffffa0021fff
[   12.763960]  [<ffffffff813399fb>] acpi_bus_register_driver+0x43/0x45
[   12.763995]  [<ffffffffa002203a>] acpi_thermal_init+0x3a/0x42 [thermal]
[   12.764029]  [<ffffffff8100207f>] do_one_initcall+0x3f/0x170
[   12.764063]  [<ffffffff810b1a5f>] sys_init_module+0x8f/0x200
[   12.764097]  [<ffffffff815ff259>] system_call_fastpath+0x16/0x1b
[   12.764129] Code: 48 8b 87 c8 02 00 00 41 89 f4 48 8d 55 dc ff 50 28 44 8b 6d dc 41 8d 45 fe 83 f8 01 76 5e 48 8b 83 d8 02 00 00 44 89 e6 48 89 df <ff> 50 18 4c 8d a3 10 03 00 00 4c 89 e7 e8 87 f1 5e e1 8b 83 bc
[   12.765164] RIP  [<ffffffffa0005277>] handle_thermal_trip+0x47/0x130 [thermal_sys]
[   12.765223]  RSP <ffff8801fe7ddc18>
[   12.765252] CR2: 0000000000000018
[   12.765284] ---[ end trace 7723294cdfb00d2a ]---

This is because thermal_zone_device_update() is invoked before
any thermal governors being registered.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>

Pull x86 timer update from Ingo Molnar:
 "This tree includes HPET fixes and also implements a calibration-free,
  TSC match driven APIC timer interrupt mode: 'TSC deadline mode'
  supported in SandyBridge and later CPUs."

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: hpet: Fix inverted return value check in arch_setup_hpet_msi()
  x86: hpet: Fix masking of MSI interrupts
  x86: apic: Use tsc deadline for oneshot when available

Pull "Nuke 386-DX/SX support" from Ingo Molnar:
 "This tree removes ancient-386-CPUs support and thus zaps quite a bit
  of complexity:

    24 files changed, 56 insertions(+), 425 deletions(-)

  ... which complexity has plagued us with extra work whenever we wanted
  to change SMP primitives, for years.

  Unfortunately there's a nostalgic cost: your old original 386 DX33
  system from early 1991 won't be able to boot modern Linux kernels
  anymore.  Sniff."

I'm not sentimental.  Good riddance.

* 'x86-nuke386-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, 386 removal: Document Nx586 as a 386 and thus unsupported
  x86, cleanups: Simplify sync_core() in the case of no CPUID
  x86, 386 removal: Remove CONFIG_X86_POPAD_OK
  x86, 386 removal: Remove CONFIG_X86_WP_WORKS_OK
  x86, 386 removal: Remove CONFIG_INVLPG
  x86, 386 removal: Remove CONFIG_BSWAP
  x86, 386 removal: Remove CONFIG_XADD
  x86, 386 removal: Remove CONFIG_CMPXCHG
  x86, 386 removal: Remove CONFIG_M386 from Kconfig

Pull x86 topology discovery improvements from Ingo Molnar:
 "These changes improve topology discovery on AMD CPUs.

  Right now this feeds information displayed in
  /sys/devices/system/cpu/cpuX/cache/indexY/* - but in the future we
  could use this to set up a better scheduling topology."

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cacheinfo: Base cache sharing info on CPUID 0x8000001d on AMD
  x86, cacheinfo: Make use of CPUID 0x8000001d for cache information on AMD
  x86, cacheinfo: Determine number of cache leafs using CPUID 0x8000001d on AMD
  x86: Add cpu_has_topoext

Pull x86 cleanups from Ingo Molnar:
 "Small cleanups."

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix the error of using "const" in gen-insn-attr-x86.awk
  x86, apic: Cleanup cfg->domain setup for legacy interrupts
  x86: Remove dead hlt_use_halt code

Pull x86 BSP hotplug changes from Ingo Molnar:
 "This tree enables CPU#0 (the boot processor) to be onlined/offlined on
  x86, just like any other CPU.  Enabled on Intel CPUs for now.

  Allowing this required the identification and fixing of latent CPU#0
  assumptions (such as CPU#0 initializations, etc.) in the x86
  architecture code, plus the identification of barriers to
  BSP-offlining, such as active PIC interrupts which can only be
  serviced on the BSP.

  It's behind a default-off option, and there's a debug option that
  allows the automatic testing of this feature.

  The motivation of this feature is to allow and prepare for true
  CPU-hotplug hardware support: recent changes to MCE support enable us
  to detect a deteriorating but not yet hard-failing L1/L2 cache on a
  CPU that could be soft-unplugged - or a failing L3 cache on a
  multi-socket system.

  Note that true hardware hot-plug is not yet fully enabled by this,
  because that requires a special platform wakeup sequence to be sent to
  the freshly powered up CPU#0.  Future patches for this are planned,
  once such a platform exists.  Chicken and egg"

* 'x86-bsp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, topology: Debug CPU0 hotplug
  x86/i387.c: Initialize thread xstate only on CPU0 only once
  x86, hotplug: Handle retrigger irq by the first available CPU
  x86, hotplug: The first online processor saves the MTRR state
  x86, hotplug: During CPU0 online, enable x2apic, set_numa_node.
  x86, hotplug: Wake up CPU0 via NMI instead of INIT, SIPI, SIPI
  x86-32, hotplug: Add start_cpu0() entry point to head_32.S
  x86-64, hotplug: Add start_cpu0() entry point to head_64.S
  kernel/cpu.c: Add comment for priority in cpu_hotplug_pm_callback
  x86, hotplug, suspend: Online CPU0 for suspend or hibernate
  x86, hotplug: Support functions for CPU0 online/offline
  x86, topology: Don't offline CPU0 if any PIC irq can not be migrated out of it
  x86, Kconfig: Add config switch for CPU0 hotplug
  doc: Add x86 CPU0 online/offline feature

Pull x86 boot changes from Ingo Molnar:
 "Two small changes: a cleanup and allow CONFIG_X86_MPPARSE to be turned
  off on SFI as well."

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arch/x86/Kconfig: Allow turning off CONFIG_X86_MPPARSE when either ACPI or SFI is present
  x86/boot/doc: Fix grammar and typo in boot.txt

Pull x86 asm changes from Ingo Molnar:
 "Two fixlets and a cleanup."

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_32: Return actual stack when requesting sp from regs
  x86: Don't clobber top of pt_regs in nested NMI
  x86/asm: Clean up copy_page_*() comments and code

Pull core timer changes from Ingo Molnar:
 "It contains continued generic-NOHZ work by Frederic and smaller
  cleanups."

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Kill xtime_lock, replacing it with jiffies_lock
  clocksource: arm_generic: use this_cpu_ptr per-cpu helper
  clocksource: arm_generic: use integer math helpers
  time/jiffies: Make clocksource_jiffies static
  clocksource: clean up parse_pmtmr()
  tick: Correct the comments for tick_sched_timer()
  tick: Conditionally build nohz specific code in tick handler
  tick: Consolidate tick handling for high and low res handlers
  tick: Consolidate timekeeping handling code

Pull scheduler updates from Ingo Molnar:
 "The biggest change affects group scheduling: we now track the runnable
  average on a per-task entity basis, allowing a smoother, exponential
  decay average based load/weight estimation instead of the previous
  binary on-the-runqueue/off-the-runqueue load weight method.

  This will inevitably disturb workloads that were in some sort of
  borderline balancing state or unstable equilibrium, so an eye has to
  be kept on regressions.

  For that reason the new load average is only limited to group
  scheduling (shares distribution) at the moment (which was also hurting
  the most from the prior, crude weight calculation and whose scheduling
  quality wins most from this change) - but we plan to extend this to
  regular SMP balancing as well in the future, which will simplify and
  speed up things a bit.

  Other changes involve ongoing preparatory work to extend NOHZ to the
  scheduler as well, eventually allowing completely irq-free user-space
  execution."

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
  Revert "sched/autogroup: Fix crash on reboot when autogroup is disabled"
  cputime: Comment cputime's adjusting code
  cputime: Consolidate cputime adjustment code
  cputime: Rename thread_group_times to thread_group_cputime_adjusted
  cputime: Move thread_group_cputime() to sched code
  vtime: Warn if irqs aren't disabled on system time accounting APIs
  vtime: No need to disable irqs on vtime_account()
  vtime: Consolidate a bit the ctx switch code
  vtime: Explicitly account pending user time on process tick
  vtime: Remove the underscore prefix invasion
  sched/autogroup: Fix crash on reboot when autogroup is disabled
  cputime: Separate irqtime accounting from generic vtime
  cputime: Specialize irq vtime hooks
  kvm: Directly account vtime to system on guest switch
  vtime: Make vtime_account_system() irqsafe
  vtime: Gather vtime declarations to their own header file
  sched: Describe CFS load-balancer
  sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking
  sched: Make __update_entity_runnable_avg() fast
  sched: Update_cfs_shares at period edge
  ...

Pull perf fixes from Ingo Molnar:
 "These are late-v3.7 pending fixes for tracing."

Fix up trivial conflict in kernel/trace/ring_buffer.c: the NULL pointer
fix clashed with the change of type of the 'ret' variable.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ring-buffer: Fix race between integrity check and readers
  ring-buffer: Fix NULL pointer if rb_set_head_page() fails
  ftrace: Clear bits properly in reset_iter_read()

Pull perf updates from Ingo Molnar:
 "Lots of activity:

   211 files changed, 8328 insertions(+), 4116 deletions(-)

  most of it on the tooling side.

  Main changes:

   * ftrace enhancements and fixes from Steve Rostedt.

   * uprobes fixes, cleanups and preparation for the ARM port from Oleg
     Nesterov.

   * UAPI fixes, from David Howels - prepares the arch/x86 UAPI
     transition

   * Separate perf tests into multiple objects, one per test, from Jiri
     Olsa.

   * Make hardware event translations available in sysfs, from Jiri
     Olsa.

   * Fixes to /proc/pid/maps parsing, preparatory to supporting data
     maps, from Namhyung Kim

   * Implement ui_progress for GTK, from Namhyung Kim

   * Add framework for automated perf_event_attr tests, where tools with
     different command line options will be run from a 'perf test', via
     python glue, and the perf syscall will be intercepted to verify
     that the perf_event_attr fields set by the tool are those expected,
     from Jiri Olsa

   * Add a 'link' method for hists, so that we can have the leader with
     buckets for all the entries in all the hists.  This new method is
     now used in the default 'diff' output, making the sum of the
     'baseline' column be 100%, eliminating blind spots.

   * libtraceevent fixes for compiler warnings trying to make perf it
     build on some distros, like fedora 14, 32-bit, some of the warnings
     really pointed to real bugs.

   * Add a browser for 'perf script' and make it available from the
     report and annotate browsers.  It does filtering to find the
     scripts that handle events found in the perf.data file used.  From
     Feng Tang

   * perf inject changes to allow showing where a task sleeps, from
     Andrew Vagin.

   * Makefile improvements from Namhyung Kim.

   * Add --pre and --post command hooks in 'stat', from Peter Zijlstra.

   * Don't stop synthesizing threads when one vanishes, this is for the
     existing threads when we start a tool like trace.

   * Use sched:sched_stat_runtime to provide a thread summary, this
     produces the same output as the 'trace summary' subcommand of
     tglx's original "trace" tool.

   * Support interrupted syscalls in 'trace'

   * Add an event duration column and filter in 'trace'.

   * There are references to the man pages in some tools, so try to
     build Documentation when installing, warning the user if that is
     not possible, from Borislav Petkov.

   * Give user better message if precise is not supported, from David
     Ahern.

   * Try to find cross-built objdump path by using the session
     environment information in the perf.data file header, from Irina
     Tirdea, original patch and idea by Namhyung Kim.

   * Diplays more output on features check for make V=1, so that one can
     figure out what is happening by looking at gcc output, etc.  From
     Jiri Olsa.

   * Add on_exit implementation for systems without one, e.g.  Android,
     from Bernhard Rosenkraenzer.

   * Only process events for vcpus of interest, helps handling large
     number of events, from David Ahern.

   * Cross compilation fixes for Android, from Irina Tirdea.

   * Add documentation on compiling for Android, from Irina Tirdea.

   * perf diff improvements from Jiri Olsa.

   * Target (task/user/cpu/syswide) handling improvements, from Namhyung
     Kim.

   * Add support in 'trace' for tracing workload given by command line,
     from Namhyung Kim.

   * ... and much more."

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (194 commits)
  uprobes: Use percpu_rw_semaphore to fix register/unregister vs dup_mmap() race
  perf evsel: Introduce is_group_member method
  perf powerpc: Use uapi/unistd.h to fix build error
  tools: Pass the target in descend
  tools: Honour the O= flag when tool build called from a higher Makefile
  tools: Define a Makefile function to do subdir processing
  perf ui: Always compile browser setup code
  perf ui: Add ui_progress__finish()
  perf ui gtk: Implement ui_progress functions
  perf ui: Introduce generic ui_progress helper
  perf ui tui: Move progress.c under ui/tui directory
  perf tools: Add basic event modifier sanity check
  perf tools: Omit group members from perf_evlist__disable/enable
  perf tools: Ensure single disable call per event in record comand
  perf tools: Fix 'disabled' attribute config for record command
  perf tools: Fix attributes for '{}' defined event groups
  perf tools: Use sscanf for parsing /proc/pid/maps
  perf tools: Add gtk.<command> config option for launching GTK browser
  perf tools: Fix compile error on NO_NEWT=1 build
  perf hists: Initialize all of he->stat with zeroes
  ...

Pull irq fixes from Ingo Molnar:
 "Affinity fixes and a nested threaded IRQ handling fix."

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Always force thread affinity
  irq: Set CPU affinity right on thread creation
  genirq: Provide means to retrigger parent

Pull RCU update from Ingo Molnar:
 "The major features of this tree are:

     1. A first version of no-callbacks CPUs.  This version prohibits
        offlining CPU 0, but only when enabled via CONFIG_RCU_NOCB_CPU=y.
        Relaxing this constraint is in progress, but not yet ready
        for prime time.  These commits were posted to LKML at
        https://lkml.org/lkml/2012/10/30/724.

     2. Changes to SRCU that allows statically initialized srcu_struct
        structures.  These commits were posted to LKML at
        https://lkml.org/lkml/2012/10/30/296.

     3. Restructuring of RCU's debugfs output.  These commits were posted
        to LKML at https://lkml.org/lkml/2012/10/30/341.

     4. Additional CPU-hotplug/RCU improvements, posted to LKML at
        https://lkml.org/lkml/2012/10/30/327.
        Note that the commit eliminating __stop_machine() was judged to
        be too-high of risk, so is deferred to 3.9.

     5. Changes to RCU's idle interface, most notably a new module
        parameter that redirects normal grace-period operations to
        their expedited equivalents.  These were posted to LKML at
        https://lkml.org/lkml/2012/10/30/739.

     6. Additional diagnostics for RCU's CPU stall warning facility,
        posted to LKML at https://lkml.org/lkml/2012/10/30/315.
        The most notable change reduces the
        default RCU CPU stall-warning time from 60 seconds to 21 seconds,
        so that it once again happens sooner than the softlockup timeout.

     7. Documentation updates, which were posted to LKML at
        https://lkml.org/lkml/2012/10/30/280.
        A couple of late-breaking changes were posted at
        https://lkml.org/lkml/2012/11/16/634 and
        https://lkml.org/lkml/2012/11/16/547.

     8. Miscellaneous fixes, which were posted to LKML at
        https://lkml.org/lkml/2012/10/30/309.

     9. Finally, a fix for an lockdep-RCU splat was posted to LKML
        at https://lkml.org/lkml/2012/11/7/486."

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
  context_tracking: New context tracking susbsystem
  sched: Mark RCU reader in sched_show_task()
  rcu: Separate accounting of callbacks from callback-free CPUs
  rcu: Add callback-free CPUs
  rcu: Add documentation for the new rcuexp debugfs trace file
  rcu: Update documentation for TREE_RCU debugfs tracing
  rcu: Reduce default RCU CPU stall warning timeout
  rcu: Fix TINY_RCU rcu_is_cpu_rrupt_from_idle check
  rcu: Clarify memory-ordering properties of grace-period primitives
  rcu: Add new rcutorture module parameters to start/end test messages
  rcu: Remove list_for_each_continue_rcu()
  rcu: Fix batch-limit size problem
  rcu: Add tracing for synchronize_sched_expedited()
  rcu: Remove old debugfs interfaces and also RCU flavor name
  rcu: split 'rcuhier' to each flavor
  rcu: split 'rcugp' to each flavor
  rcu: split 'rcuboost' to each flavor
  rcu: split 'rcubarrier' to each flavor
  rcu: Fix tracing formatting
  rcu: Remove the interface "rcudata.csv"
  ...

Merge branches 'core-locking-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull trivial fix branches from Ingo Molnar.

Cleanup in __get_key_name, and a timer comment fixlet.

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep: Use KSYM_NAME_LEN'ed buffer for __get_key_name()

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers, sched: Correct the comments for tick_sched_timer()

Merge misc updates from Andrew Morton:
 "About half of most of MM.  Going very early this time due to
  uncertainty over the coreautounifiednumasched things.  I'll send the
  other half of most of MM tomorrow.  The rest of MM awaits a slab merge
  from Pekka."

* emailed patches from Andrew Morton: (71 commits)
  memory_hotplug: ensure every online node has NORMAL memory
  memory_hotplug: handle empty zone when online_movable/online_kernel
  mm, memory-hotplug: dynamic configure movable memory and portion memory
  drivers/base/node.c: cleanup node_state_attr[]
  bootmem: fix wrong call parameter for free_bootmem()
  avr32, kconfig: remove HAVE_ARCH_BOOTMEM
  mm: cma: remove watermark hacks
  mm: cma: skip watermarks check for already isolated blocks in split_free_page()
  mm, oom: fix race when specifying a thread as the oom origin
  mm, oom: change type of oom_score_adj to short
  mm: cleanup register_node()
  mm, mempolicy: remove duplicate code
  mm/vmscan.c: try_to_freeze() returns boolean
  mm: introduce putback_movable_pages()
  virtio_balloon: introduce migration primitives to balloon pages
  mm: introduce compaction and migration for ballooned pages
  mm: introduce a common interface for balloon pages mobility
  mm: redefine address_space.assoc_mapping
  mm: adjust address_space_operations.migratepage() return code
  arch/sparc/kernel/sys_sparc_64.c: s/COLOUR/COLOR/
  ...

Old memory hotplug code and new online/movable may cause a online node
don't have any normal memory, but memory-management acts bad when we have
nodes which is online but don't have any normal memory.  Example: it may
cause a bound task fail on all kernel allocation and cause the task can't
create task or create other kernel object.

So we disable non-normal-memory-node here, we will enable it when we
prepared.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make online_movable/online_kernel can empty a zone or can move memory to a
empty zone.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add online_movable and online_kernel for logic memory hotplug.  This is
the dynamic version of "movablecore" & "kernelcore".

We have the same reason to introduce it as to introduce "movablecore" &
"kernelcore".  It has the same motive as "movablecore" & "kernelcore", but
it is dynamic/running-time:

o We can configure memory as kernelcore or movablecore after boot.

  Userspace workload is increased, we need more hugepage, we can't use
  "online_movable" to add memory and allow the system use more
  THP(transparent-huge-page), vice-verse when kernel workload is increase.

  Also help for virtualization to dynamic configure host/guest's memory,
  to save/(reduce waste) memory.

  Memory capacity on Demand

o When a new node is physically online after boot, we need to use
  "online_movable" or "online_kernel" to configure/portion it as we
  expected when we logic-online it.

  This configuration also helps for physically-memory-migrate.

o all benefit as the same as existed "movablecore" & "kernelcore".

o Preparing for movable-node, which is very important for power-saving,
  hardware partitioning and high-available-system(hardware fault
  management).

(Note, we don't introduce movable-node here.)

Action behavior:
When a memoryblock/memorysection is onlined by "online_movable", the kernel
will not have directly reference to the page of the memoryblock,
thus we can remove that memory any time when needed.

When it is online by "online_kernel", the kernel can use it.
When it is online by "online", the zone type doesn't changed.

Current constraints:
Only the memoryblock which is adjacent to the ZONE_MOVABLE
can be online from ZONE_NORMAL to ZONE_MOVABLE.

[akpm@linux-foundation.org: use min_t, cleanups]
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

use [index] = init_value
use N_xxxxx instead of hardcode.

Make it more readability and easier to add new state.
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It is strange that alloc_bootmem() returns a virtual address and
free_bootmem() requires a physical address.  Anyway, free_bootmem()'s
first parameter should be physical address.

There are some call sites for free_bootmem() with virtual address.  So fix
them.

[akpm@linux-foundation.org: improve free_bootmem() and free_bootmem_pate() documentation]
Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>