- 27 Apr, 2009 10 commits
-
-
Kevin Hilman authored
Rework DM644x code into SoC specific and board specific parts. This is also to generalize the structure a bit so it's easier to add support for new SoCs in the DaVinci family. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Kevin Hilman authored
Rename DM6446 EVM board file, no functional changes. Code is updated and reworked in following patch. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Kevin Hilman authored
Update MUX support to be more general and useful across multiple SoCs in the DaVinci family. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Kevin Hilman authored
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
s-paulraj@ti.com authored
Adding IRQ defintions for DaVinci DM355 and default interrupt priorities for DM355 Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Sudhakar Rajashekhara authored
Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Mark A. Greer authored
Clear any set bits in the 'NEXT' field of the MDCTL register in the Power and Sleep Controller (PSC) before setting any new bits. This also allows some minor cleanup by removing some no longer needed lines of code. Signed-off-by: Mark A. Greer <mgreer@mvista.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
David Brownell authored
Update the DaVinci GPIO code to work better on non-dm6446 parts, notably the dm355: - Only handle the number of GPIOs the chip actually has. So for example on dm6467, GPIO-42 is the last GPIO, and trying to use GPIO-43 now fails cleanly; or GPIO-72 on dm6446. - Enable GPIO interrupts on each 16-bit GPIO-irq bank ... previously, only the first five were enabled, so GPIO-80 and above (on dm355) wouldn't trigger IRQs. - Use the right IRQ for each GPIO bank. The wrong values were used for dm355 chips, so GPIO IRQs got routed incorrectly. - Handle up to four pairs of 16-bit GPIO banks ... previously only three were handled, so accessing GPIO-96 and up (e.g. on dm355) would oops. - Update several comments that were dm6446-specific. Verified by receiving GPIO-1 (dm9000) and GPIO-5 (msp430) IRQs on the DM355 EVM. One thing this doesn't do is handle the way some of the GPIO numbers on dm6467 are reserved but aren't valid as GPIOs. Some bitmap logic could fix that if needed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Kevin Hilman authored
Original code for 2.6.10 and 2.6.28 series done by Texas Instruments and MontaVista, but major updates and rework done by Troy Kisky and David Brownell. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Troy Kisky <troy.kisky@boundarydevices.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Kevin Hilman authored
Use clock framework instead of hard-coded CLOCK_TICK_RATE for determining timer tick frequencies. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
- 23 Apr, 2009 4 commits
-
-
Kevin Hilman authored
Add arch-specific ioremap() which uses any existing static mappings in place of doing a new mapping. From now on, drivers should always use ioremap() instead of IO_ADDRESS(). In addition, remove the davinci_[read|write]* macros in favor of using ioremap. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Kevin Hilman authored
This is a significant rework of the low-level clock, PLL and Power Sleep Controller (PSC) implementation for the DaVinci family. The primary goal is to have better modeling if the hardware clocks and features with the aim of DVFS functionality. Highlights: - model PLLs and all PLL-derived clocks - model parent/child relationships of PLLs and clocks - convert to new clkdev layer - view clock frequency and refcount via /proc/davinci_clocks Special thanks to significant contributions and testing by David Brownell. Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Kevin Hilman authored
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
Kevin Hilman authored
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
-
- 22 Apr, 2009 5 commits
-
-
Linus Torvalds authored
-
Arjan van de Ven authored
There is currently only one way for userspace to say "wait for my storage device to get ready for the modules I just loaded": to load the scsi_wait_scan module. Expectations of userspace are that once this module is loaded, all the (storage) devices for which the drivers were loaded before the module load are present. Now, there are some issues with the implementation, and the async stuff got caught in the middle of this: The existing code only waits for the scsy async probing to finish, but it did not take into account at all that probing might not have begun yet. (Russell ran into this problem on his computer and the fix works for him) This patch fixes this more thoroughly than the previous "fix", which had some bad side effects (namely, for kernel code that wanted to wait for the scsi scan it would also do an async sync, which would deadlock if you did it from async context already.. there's a report about that on lkml): The patch makes the module first wait for all device driver probes, and then it will wait for the scsi parallel scan to finish. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jonathan Corbet authored
Fix a comment typo in slow-work.h ...a trivial mistake, but it will mess up kerneldoc if nothing else. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so that they're in one place, and give them descriptive comments, particularly the SHARED_ALIGNED variant. It would be nice to collect these in linux/percpu.h, but that's not possible without sorting out the severe #include recursion between the x86 arch headers and the general headers (and possibly other arches too). Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU() does not agree with that specified by DEFINE_PER_CPU(). This means that architectures that have a small data section references relative to a base register may throw up linkage errors due to too great a displacement between where the base register points and the per-CPU variable. On FRV, the .h declaration says that the variable is in the .sdata section, but the .c definition says it's actually in the .data section. The linker throws up the following errors: kernel/built-in.o: In function `release_task': kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o To fix this, DECLARE_PER_CPU() should simply apply the same section attribute as does DEFINE_PER_CPU(). However, this is made slightly more complex by virtue of the fact that there are several variants on DEFINE, so these need to be matched by variants on DECLARE. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 21 Apr, 2009 21 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix btrfs fallocate oops and deadlock Btrfs: use the right node in reada_for_balance Btrfs: fix oops on page->mapping->host during writepage Btrfs: add a priority queue to the async thread helpers Btrfs: use WRITE_SYNC for synchronous writes
-
git://jdelvare.pck.nerim.net/jdelvare-2.6Linus Torvalds authored
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: go7007: Convert to the new i2c device binding model
-
Roel Kluin authored
`!' has a higher precedence than `&', parentheses are misplaced. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sonic Zhang <sonic.zhang@analog.com> Cc: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KOSAKI Motohiro authored
Commit a6dc60f8 ("vmscan: rename sc.may_swap to may_unmap") removed the may_swap flag, but memcg had used it as a flag for "we need to use swap?", as the name indicate. And in the current implementation, memcg cannot reclaim mapped file caches when mem+swap hits the limit. re-introduce may_swap flag and handle it at get_scan_ratio(). This patch doesn't influence any scan_control users other than memcg. Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Dave Jiang authored
Error found by Jeff Haran. The error detect register is 0s when no errors are detected. The check code is incorrect, so reverse check sense. Reported-by: Jeff Haran <jharan@Brocade.COM> Signed-off-by: Dave Jiang <djiang@mvista.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Eric Paris authored
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13133 ODEBUG: object is on stack, but not annotated ------------[ cut here ]------------ WARNING: at lib/debugobjects.c:253 __debug_object_init+0x1f3/0x276() Hardware name: VMware Virtual Platform Modules linked in: mptspi(+) mptscsih mptbase scsi_transport_spi ext3 jbd mbcache Pid: 540, comm: insmod Not tainted 2.6.28-mm1 #2 Call Trace: [<c042c51c>] warn_slowpath+0x74/0x8a [<c0469600>] ? start_critical_timing+0x96/0xb7 [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c [<c0446fad>] ? trace_hardirqs_off_caller+0x18/0xaf [<c044704f>] ? trace_hardirqs_off+0xb/0xd [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c [<c042cb84>] ? release_console_sem+0x1a5/0x1ad [<c05013e6>] __debug_object_init+0x1f3/0x276 [<c0501494>] debug_object_init+0x13/0x17 [<c0433c56>] init_timer+0x10/0x1a [<e08e5b54>] mpt_config+0x1c1/0x2b7 [mptbase] [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase] [<e08e3b82>] ? kmalloc+0x8/0xa [mptbase] [<e08e6fa2>] mpt_do_ioc_recovery+0x950/0x1212 [mptbase] [<c04496c2>] ? __lock_acquire+0xa69/0xacc [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c [<c060c3af>] ? _spin_unlock_irq+0x22/0x26 [<c04f2d8b>] ? string+0x2b/0x76 [<c04f310e>] ? vsnprintf+0x338/0x7b3 [<c04496c2>] ? __lock_acquire+0xa69/0xacc [<c060c8ea>] ? _spin_unlock_irqrestore+0x2f/0x3c [<c04496c2>] ? __lock_acquire+0xa69/0xacc [<c044897d>] ? debug_check_no_locks_freed+0xeb/0x105 [<c060c8f1>] ? _spin_unlock_irqrestore+0x36/0x3c [<c04488bc>] ? debug_check_no_locks_freed+0x2a/0x105 [<c0446b8c>] ? lock_release_holdtime+0x43/0x48 [<c043f742>] ? up_read+0x16/0x29 [<c05076f8>] ? pci_get_slot+0x66/0x72 [<e08e89ca>] mpt_attach+0x881/0x9b1 [mptbase] [<e091c8e5>] mptspi_probe+0x11/0x354 [mptspi] Noticing that every caller of mpt_config has its CONFIGPARMS struct declared on the stack and thus the &pCfg->timer is always on the stack I changed init_timer() to init_timer_on_stack() and it seems to have shut up..... Cc: "Moore, Eric Dean" <Eric.Moore@lsil.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by: "Desai, Kashyap" <Kashyap.Desai@lsi.com> Cc: <stable@kernel.org> [2.6.29.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Robin Holt authored
For an upcoming distro release, we need to have the xp kernel module loadable even when not on UV equipment. The xpc module will not load. This will allow one set of modules dependent upon xp to work on either UV or non-UV equipment. Signed-off-by: Robin Holt <holt@sgi.com> Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
WANG Cong authored
Got this warning from Kconfig: boolean symbol INPUT tested for 'm'? test forced to 'n' because INPUT is tristate, not bool. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Insert PCI root bus resources for the FRV-based MB93090 development kit motherboard. This is required because the CPU's window onto the PCI bus address space is considerably smaller than the CPU's full address space and non-PCI devices lie outside of the PCI window that we might want to access. Without this patch, the PCI root bus uses the platform-level bus resources, and these are then confined to the PCI window, thus making platform_device_add() reject devices outside of this window. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Krzysztof Halasa authored
With no IRQ available/defined, RTC-CMOS driver prints something like: rtc0: alarms up to one no, y3k, 114 bytes nvram ^^^^ I guess the following is a bit easier to understand: rtc0: no alarms, y3k, 114 bytes nvram Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Brownell authored
This is a doc-only patch which I hope will reduce the number of spi_master controller driver patches starting out with a common implementation bug. (As in: almost every spi_master driver I see starts out with its version of this bug. Sigh.) It just re-emphasizes that the setup() method may be called for one device while a transfer is active on another ... which means that most driver implementations shouldn't touch any registers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Robert P. J. Day authored
Add a parenthesized string of "H8300" for more convenient searchability in the MAINTAINERS file. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Matt Mackall authored
Impact: make more work for myself Signed-off-by: Matt Mackall <mpm@selenic.com> Cc: David Woodhouse <dwmw2@infradead.org> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Roel Kluin authored
On line 944 the return value of flush() is considered as a boolean, but limit reaches -1 upon timeout which evaluates to true. On 540, 594, 720 the same occurs for wait_ssp_rx_stall() On 536 the same occurs for wait_dma_channel_stop() Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Eric Miao <eric.miao@marvell.com> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Joe Perches authored
There are no more arches with suspend support using these directories. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Ribeiro authored
If DMA is enabled, any spi_sync call after suspend/resume would block forever, because DRCMR is lost on suspend. This patch restores DRCMR to the same values set by probe. Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Helge Deller authored
On parisc machines, which don't have HIL, removing the hp_sdc module panics the kernel. Fix this by returning early in hp_sdc_exit() if no HP SDC controller was found. Add functionality to probe for the hp_sdc_mlc kernel module (which takes care of the upper layer HIL functionality on parisc) after two seconds. This is needed to get all the other HIL drivers (keyboard / mouse/ ..) drivers automatically loaded by udev later as well. Signed-off-by: Helge Deller <deller@gmx.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Frans Pop <elendil@planet.nl> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Grant Grundler <grundler@parisc-linux.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
KAMEZAWA Hiroyuki authored
mm->owner should be accessed with rcu_dereference(). Reported-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Akinobu Mita authored
This fixes the following BUG: # mount -o size=MM -t hugetlbfs none /huge hugetlbfs: Bad value 'MM' for mount option 'size=MM' ------------[ cut here ]------------ kernel BUG at fs/super.c:996! Due to BUG_ON(!mnt->mnt_sb); in vfs_kern_mount(). Also, remove unused #include <linux/quotaops.h> Cc: William Irwin <wli@holomorphy.com> Cc: <stable@kernel.org> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
dann frazier authored
Enable userspace to receive messages that a BMC transmits using an OEM medium. This is used by the HP iLO2. Based on code originally written by Patrick Schoeller. Signed-off-by: dann frazier <dannf@hp.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-