- 13 Oct, 2008 7 commits
-
-
Takashi Iwai authored
Manage all kcontrol elements created in the hda-intel driver. This makes it possible to remove and reconfigure the controls of each codec. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Allocate dynamically the name string of each codec instead of pointing to a static string. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Use generic array helpers to simplify array handling in snd-hda-intel. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Added helper functions to handle generic arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Added the infrastructure for dynamic stream allocation on HD-audio. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Matthew Ranostay authored
Corrected invalid mixer index values on the 92hd71bxxx codec branch. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Matthew Ranostay authored
Add support for mixers on the analog mixer on some 92hd75xx codecs, along with adding a 'Mixer' entry for it's connection on the dmux. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 10 Oct, 2008 33 commits
-
-
Matthew Ranostay authored
Add support for powering down VREF on standard headphone insertion, also powers up the VREF on a headset insertion. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Matthew Ranostay authored
Set the third microphone to a default config of a 'Line In' to be added the Input Source Mux's. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Mark Brown authored
Since there are now multiple OpenMoko platforms it is more important to check that the machine driver is running on the correct system. This was orgininally generated as part of the initial GTA02 machine port. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Ingo reported Oops at probing mtpav driver. It's a race between the irq handler and the rawmidi instance registration. This patch fixes the order of registration to avoid the race. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Pedro Lopez-Cabanillas authored
The MIDI interfaces have to be detected dynamically for Edirol devices ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by my other patch in uaxx-quirk. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Added a note on the dependency of old RTC stuff, which is exclusive with the new RTC class drivers. http://bugme.linux-foundation.org/show_bug.cgi?id=11430Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Richard Zhao authored
Function dapm_mux_update_power needs enum index mux and register mask value val as parameters, but it only has a parameter val, and uses it as both val and mux. snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here, e->texts[val] but val should be enum index mux here. This patch adds a new param mux to fix it. Signed-off-by: Richard Zhao <linuxzsc@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Increase the card components[] (and thus snd_card_info.components[], too) array size from 80 to 128 chars so that more strings can be stored. The 80 chars aren't enough for more than 2 HD-audio codecs, and this hits an ugly snd_BUG() as reported by Wu Fegguang for HP 2230s. The control protocol number is increased to 2.0.6 as well, in case it matters. Reported-by: Wu Fengguang <wfg@linux.intel.com> Acked-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Mark Brown authored
Mic PGA Switch should be inverted in the WM8510 driver but isn't. Reported-by: ext-jukka.hynninen@vaisala.com Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Wu Fengguang authored
fix a typo in comment for is_in_nid_list(). Signed-off-by: Wu Fengguang <wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Wu Fengguang authored
fix a typo in comment for process_unsol_events(). Signed-off-by: Wu Fengguang<wfg@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
The PCI SSID for ASROCK mobo in commit ac56445dd6a38a36c2fa91989f5f6220a9bdf97c is wrong. This patch fixes to the correct one, 1849:3662. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Pedro Lopez-Cabanillas authored
Renamed the old quirk function for ua-700/ua-25 to become more generic, moving the MIDI interfaces to the quirk data header. Added a new quirk for the Edirol UA-4FX. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
The endpoints should be released immediately at disconnection rather than the delayed release. This could be a reason of Oops at USB-audio device disconnection being used. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Clive Messer authored
ALC889A hardware (id 0x10ec0885 rev 0x100101) to use patch_alc883 Signed-off-by: Clive Messer <clive@vacuumtube.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Vedran Miletic authored
I recently got a chance to play with two boards with ALC662 rev1: * BIOSTAR TA780G M2+ * ASROCK K10N78FullHD-hSLI R3.0 Both use 3 stack, 6ch mode with digital out. Since autodetection isn't able to figure that out from BIOS, we need to specify that manually. Signed-off-by: Vedran Miletic <rivanvx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Vladimir Barinov authored
Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Vedran Miletic authored
This patch adds PCI IDs for: * TerraTec DMX XFire 1024 * Hercules Gamesurround Fortissimo II * Hercules Gamesurround Fortissimo III 7.1 All those cards were supported as generic CS46xx device, so they will work as before. I'm pretty sure that first two cards work, as they have same hardware design as reference card. Not sure about Fortissimo III, but this won't break it if it worked. Tested on TerraTec DMX XFire 1024. Signed-off-by: Vedran Miletic <rivanvx@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Matthew Ranostay authored
Added support for muting S/DPIF outs using the 'Digital Playback Source' muxs on supporting codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Peter Korsgaard authored
The AppleTV needs the same handling as the 24" iMac. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Herton Ronaldo Krzesinski authored
Use 3stack-6ch-dig ALC662 model for Foxconn 45CMX/45GMX/45CMX-K motherboard. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Herton Ronaldo Krzesinski authored
Use 3stack-6ch-dig ALC662 model for Gigabyte 945GCM-S2L motherboard. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Julien Brunel authored
The test (ssc != NULL) can only be reached if the call to the function ssc_request, the result of which ssc is assigned, succeeds. Moreover, two statements assign NULL to ssc just before a return, which is useless since it is a local variable. So, we suggest to delete the test and the two assignments. A simplified version of the semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @bad_null_test@ expression x,E; @@ x = ssc_request(...) ... when != x = E * x != NULL // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Matthew Ranostay authored
Added HP laptop SND_PCI_QUIRK for STAC_HP_M4. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Matthew Ranostay authored
Add support for S/PDIF IN on reference boards quirks. Also disable the IEC958 capture switch on boards with GPIO0 enabled. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Eran Tromer authored
Add support for the E-Mu "Tracker Pre" USB sound card, following the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB. As with the 0202 and 0404 USB, functionality is very limited: just a couple of sample rates, no volume/mute control, etc. Signed-off-by: Eran Tromer <eran@tromer.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Wei Ni authored
When read RIRB buffer immediately after RIRB interrupt received, sometimes the data will be "0x0". If we wait for some time, the data in buffer will be correct. This issue only occurred with AMD Phenom cpu. So we set this "needs_damn_long_delay" flag. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Wei Ni authored
Add NVIDIA HDMI HD-audio codec support in snd-hda-intel driver, include NVIDIA MCP78/7A HDMI. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
The recent slave_dig_out addition has some rooms to clean up. Also it doesn't call snd_hda_cleanup_stream() properly for slaves at closing. The patch fixes both issues. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Matthew Ranostay authored
Removed invalid references to slave_dig_outs inside the S/PDIF IN capture switch control. Beforehand this was basically a mute switch for the S/PDIF outs as well. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
Fujitsu Lifebook P7010 requires ac97_quirk=hp_only. http://bugzilla.kernel.org/show_bug.cgi?id=9100Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Takashi Iwai authored
We have some arithmetic operations against snd_pcm_hw_param_t, thus bitwise isn't correct for it. Better to remove the flag to shut up sparse warnings. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-
Matthew Ranostay authored
Patch allows the last DAC in the dac_nids for the hp_nid if there is an available one this isn't in use by a line_out entry or if hp_nid isn't already defined. This solves the issues with the 'Headphone Playback' mixer controls on the 92hd73xxx branch and possibly others. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
-