Introduce the CONFIG_DEV firmware command which we will use to
configure the UDP port assumed by the firmware for the VXLAN offloads.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a VF issues a firmware command which is disallowed for them, the PF
rerturns -EPERM from that command wrapper. Move to use one such wrapper
instance, instead of repeating the same code on such commands.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 2dc33bbc "bnx2x: Remove the sriov VFOP mechanism" introduced a possible
memory leak on the error flow during multicast filters configuration.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The pm_rumtime work queue is causing the device to be suspended during
initialisation, thus the initialisation may not be able to access registers
properly. As the code is called from a work queue, it is possible that this
is not seen from certain configurations/builds due to the asynchronos
nature of the code.

Another issue has also been found where the network device registration
calls back into the driver thus causing further pm_runtime calls that
also caused issues with the MDIO bus code. This has now been checked
and is the only place the MDIO can be called without the device open.

Use pm_runtime_get_sync() and pm_runtime_put() to ensure that the
pm system does not suspend it during the probe() call and remove the
now unnecessary pm_runtime_resume() call. Also add a call in the error
path to call pm_runtime_disable().

This fixes the external abort that can cause /sbin/init or other such
init processed to die.
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Like the STi and sunxi series SOCs, Altera's SOCFPGA also needs a glue layer
on top of the Synopsys gmac IP.

This patch adds the platform driver for the glue layer which configures the IP
before the generic STMMAC driver takes over.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If kmalloc() fails in c4iw_alloc_ucontext(), the function
leaves but does not set an error code in ret variable:
it will return 0 to the caller.

This patch set ret to -ENOMEM in such case.

Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Steve Wise <swise@chelsio.com>
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Erik Hugne says:

====================
tipc: fix handling of NETDEV_CHANGEADDR event

Aside from manual reconfiguration of the netdevice hwaddr, this can also
be changed automatically for an interface bond in active-backup mode
if fail_over_mac is enabled. This patchset fixes the handling of this
event in TIPC by properly updating the l2 media address for the bearer,
followed by a reinitialization of the node discovery mechanism.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The node discovery domain is assigned when a bearer is enabled.
In the previous commit we reflect this attribute directly in the
bearer structure since it's needed to reinitialize the node
discovery mechanism after a hardware address change.

There's no need to replicate this attribute anywhere else, so we
remove it from the tipc_link_req structure.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the hardware address of a underlying netdevice is changed, it is
not enough to simply reset the bearer/links over this device. We
also need to reflect this change in the TIPC bearer and node
discovery structures aswell.

This patch adds the necessary reinitialization of the node disovery
mechanism following a hardware address change so that the correct
originating media address is advertised in the discovery messages.
Signed-off-by: Erik Hugne <erik.hugne@ericsson.com>
Reported-by: Dong Liu <dliu.cn@gmail.com>
Reviewed-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to e1000e, igb, i40e and i40evf

Anjali provides i40e fix to remove the ATR filter on RST as well as FIN
packets.  Cleans up add_del_fdir() because it was used and implemented
only for the add, so change the name and drop a parameter.  Adds the
ability to drop a flow if we wanted to and adds a flow director
message level to be used for flow director specific messages.

Mitch fixes an issue on i40evf where the Tx watchdog handler was causing
an oops when sending an admin queue message to request a reset because
the admin queue functions use spinlocks.

Greg provides a change to i40e to make the alloc and free queue vector
calls orthogonal.

Shannon fixes i40e to verify the eeprom checksum and firmware CRC status
bits, and shutdown the driver if they fail.  This change stops the
processing of traffic, but does not kill the PF netdev so that the
NVMUpdate process still has a chance at fixing the image.  Also provides
a fix to make sure the VSI has a netdev before trying to use it in
the debugfs netdev_ops commands.

Jakub Kicinski provides patches for e1000e and igb to fix a number issues
found in the PTP code.

v2:
- drop patch 11 "i40e: Add a fallback debug flow for the driver" from the
  series based on feedback from David Miller
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes following:

drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1828 sxgbe_hw_init()
error: potential null dereference 'priv->hw'.  (kmalloc returns null)
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes followings:

sparse warnings: (new ones prefixed by >>)

>> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:197:5:
sparse: symbol 'sxgbe_platform_freeze' was not declared. Should it be static?
>> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:204:5:
sparse: symbol 'sxgbe_platform_restore' was not declared. Should it be static?
>> drivers/net/ethernet/samsung/sxgbe/sxgbe_platform.c:228:24:
sparse: symbol 'sxgbe_platform_driver' was not declared. Should it be static?

>> drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c:1795:6:
sparse: symbol 'sxgbe_get_ops' was not declared. Should it be static?
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Byungho An <bh74.an@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sathya Perla says:

====================
be2net: add vxlan offload support

The first patch adds the FW cmds needed to configure the Skyhawk-R
chip for supporting VxLAN offloads. The second patch implements the
ndo_add/del_vxlan_port() methods and the plumbing for supporting
RX/TX csum, TSO and RSS steering offloads for VxLAN traffic.

v2 changes:
NETIF_F_SG need not be set for hw_enc_features by the driver as it is
done by the stack.

v3 changes:
* Defer FW cmds needed for VxLAN offloads to a workqueue
* Reset FW to VxLAN offloads disabled state in the unload path

v4 changes:
* Revert the usage of workqueue (introduced in v3) to implement
ndo_add/del_vxlan_port() as it is currently not needed (none of the
FW cmd calls sleep.) Suggested by David M.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch mainly implements the add/del_vxlan_port() methods by invoking
the needed FW cmds for supporting VxLAN offloads for Skyhawk-R.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for the FW cmds needed for VxLAN offloads
on Skyhawk-R:
1) The VxLAN UDP port needs to be configured via the port-desc of
   SET_PROFILE_CONFIG_v1 cmd.
   This patch re-factors the be_set_profile_config() code (used so far
   only for setting VF QoS) to be used to set any type of descriptor.
2) The MANAGE_IFACE_FILTERS cmds is needed to convert a normal interface
   into a tunnel interface. This allows for RSS to work even on the inner
   TCP/UDP headers of VxLAN traffic.
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

igb has a single set of TX time stamping resources per NIC.
Use a simple bit lock to avoid race conditions and leaking skbs
when multiple TX rings try to claim time stamping.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

skb_tx_timestamp() does not report software time stamp
if SKBTX_IN_PROGRESS is set. According to timestamping.txt
software time stamps are a fallback and should not be
generated if hardware time stamp is provided.

Move call to skb_tx_timestamp() after setting
SKBTX_IN_PROGRESS.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

tx_hwtstamp_skb is always set before work is scheduled,
work is cancelled before tx_hwtstamp_skb is set to NULL.
PTP work cannot ever see tx_hwtstamp_skb set to NULL.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Hardware may fail to report time stamp e.g.:
 - when hardware time stamping is not enabled
 - when time stamp is requested shortly after ifup

Timeout time stamp reading work to prevent it from
scheduling itself indefinitely. Report timeout events
via system log and device stats.
Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We don't need to print this info unless at FD message level.

Change-ID: I329efdd8e754a0ea0669ec04d12e03db02e6b76e
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

To use for Flow Director specific messages.

Change-ID: I69e39a410aa2661f8fd1ed6af0126fa4c335cb77
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Make sure the VSI has a netdev before trying to use it
in the debugfs netdev_ops commands.

Change-ID: I2d744fc0c32b3226534ce2cde171d9675c5440a6
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

There were two spaces between return and the value, we only need one.

Change-ID: Iaa42c33f50d8d149cdf1a4c9c1902295bfd991c4
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Kevin Scott <kevin.c.scott@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

With this change we can drop a flow if we wanted to.

Change-ID: I222b1ae960e61a31965bafe3159a95099e70c7d2
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Function add_del_fdir was used and implemented only for add. So change the name
and drop a parameter.

Change-ID: Icf2c6c3bbd4fd00cf8d9613a3f6d8c08e0f8e288
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The driver needs to verify the eeprom checksum and firmware crc status bits,
and shutdown the driver if they fail. This code stops the processing of traffic,
but doesn't kill the PF netdev so that the NVMUpdate process should still have a
chance at fixing the image. The eeprom is checked on driver load and after an
EMP reset, the latter of which should be generated after an NVMUpdate.

Change-ID: I34deef21d2e16bf5a43c603cf8af27e6a29dc9d2
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

It's annoying to search for a matching alloc and free set of function calls
when they don't use the same framework for the name of the functions.  Fix
that up in the case of alloc and free of vsi queue vectors.

i40e_vsi_free_q*
i40e_vsi_alloc_q*

Change-ID: I510eb863a0fbe405312bebea55c2846c76285e6d
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

The Tx watchdog handler runs in interrupt context, so it would cause an
oops when sending an admin queue message to request a reset, because the
admin queue functions use spinlocks.

Instead, set a flag and let the reset task handle sending the request.

Change-ID: I65879470b72963d9c308edfb8f45ac4fbba2c14f
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

We currently delete ATR filter on FIN alone, delete on RST as well.

Change-ID: Ie7cae5d1046b9d1d4a0d6ef5bdbf41224c3dade6
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Florian Fainelli says:

====================
net: remove empty MDIO bus reset functions

This patchset removes all empty MDIO bus reset functions that we have in the
tree (hopefully all of them). This function is optional for the MDIO bus code in
drivers/net/phy/mdio_bus.c::mdiobus_register, the documentation is updated to
reflect that.

Having less call sites to update will allow us to implement a generic BMCR_RESET
based PHY reset for MDIO buses that require to reset their PHYs before their
PHY detection succeeds (e.g: HiSilicon hip04 current submission) and provide it
as a helper.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the MDIO bus documentation to mention that the MDIO bus reset
function is completely optional. It became optional with commit
e1393456 ("[PATCH] PHY Layer fixup")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bfin_mdiobus_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

r6040_mdiobus_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ftgmac100_mdiobus_reset() does nothing useful and is optional for the
MDIO bus code, so let's just remove it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sun4i_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xemaclite_mdio_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

orion_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fs_enet_fec_mii_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

fec_enet_mdio_reset() does nothing useful and is optional for the MDIO
bus code, so let's just remove it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethoc_mdio_reset() does nothing useful and is optional for the MDIO bus
code, so let's just remove it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>