- 30 Sep, 2015 40 commits
-
-
Anjali Singhai Jain authored
Due to performance reasons, VEB stats have been disabled in the hw. This patch adds code to check for that condition before accumulating these stats. Change-ID: I7d805669476fedabb073790403703798ae5d878e Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Shannon Nelson authored
Add new device id and support for another 20Gb device. Change-ID: Ib1b61e5bb6201d84953f97cade39a6e3369c2cf2 Signed-off-by:
Shannon Nelson <shannon.nelson@intel.com> Tested-by:
-
Greg Rose authored
Remove a useless message that blathers on whenever a vxlan port is deleted. Change-ID: If63fb8cf38e56cf433b68e498f11389de51919ba Signed-off-by:
Greg Rose <gregory.v.rose@intel.com> Tested-by:
-
Shannon Nelson authored
Don't let the debugfs register read and write commands try to access outside of the ioremapped space. While we're at it, remove the use of a misleading constant. Change-ID: Ifce2893e232c65c7a76c23532c658f298218a81b Signed-off-by:
-
Mitch Williams authored
In i40e_ndo_set_vf_port_vlan, we were using the QOS value inconsistently, sometimes shifting it, sometimes not. Do the shift-and- or operation correctly, once, and use the result consistently everywhere in the function. Change-ID: I46f062f3edc90a8a017ecec9137f4d1ab0ab9e41 Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Jesse Brandeburg authored
The i40e rx_dropped counter was not showing up in netstat -i. Add the right counter to be updated with the stats. Change-ID: I4dd552e9995836099184f9d9a08e90edb591155f Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Jesse Brandeburg authored
The arm writeback (arm_wb) code is used for kicking the Tx ring to make sure any pending work is completed even if interrupts are disabled. It was running when it didn't need to, and not clearing the ring->arm_wb state after it was set. This caused Tx hangs to still occur occasionally when there really was no hang. Fix this by resetting the variable right after it was used. Change-ID: I7bf75d552ba9c4bd203d40615213861a24bb5594 Signed-off-by:
-
Shannon Nelson authored
The struct i40e_aqc_get_cee_dcb_cfg_v1_resp was originally defined with word boundary layout issues, which most compilers deal with by silently adding padding, making the actual struct larger than designed. This patch adds an extra byte in fields reserved3 and reserved4 to directly acknowledge that padding. Because the struct doesn't actually change in size or layout, this doesn't constitute a change in the API. Change-ID: I53fa4741b73fa255621232a85fba000b0e223015 Signed-off-by:
-
Greg Rose authored
If a port VLAN is set for a given virtual function (VF) before the VF driver is loaded then a configuration error results in which the port VLAN is ignored when the VF driver is subsequently loaded. This causes the VF's MAC/VLAN filters to not use the correct VLAN filter. This patch ensures that the port VLAN filter is considered at the right time during configuration of the VF's MAC/VLAN filters. Change-ID: I28f404cbc21a4c6d70a7980b87c77f13f06685a4 Signed-off-by:
-
Shannon Nelson authored
The error code sent into i40e_aq_rc_to_posix() are signed values, so we really need to treat them as such. Change-ID: I3d1ae0ee9ae0b1b6f5fc424f8b8cc58b0ea93203 Reported-by:
Helin Zhang <helin.zhang@intel.com> Signed-off-by:
-
Vasily Averin authored
Signed-off-by:
Vasily Averin <vvs@virtuozzo.com> Tested-by:
-
Vasily Averin authored
Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following pull request contains Netfilter/IPVS updates for net-next containing 90 patches from Eric Biederman. The main goal of this batch is to avoid recurrent lookups for the netns pointer, that happens over and over again in our Netfilter/IPVS code. The idea consists of passing netns pointer from the hook state to the relevant functions and objects where this may be needed. You can find more information on the IPVS updates from Simon Horman's commit merge message: c3456026 ("Merge tag 'ipvs2-for-v4.4' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-next"). Exceptionally, this time, I'm not posting the patches again on netdev, Eric already Cc'ed this mailing list in the original submission. If you need me to make, just let me know. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Because of the default 0 value of ret in dsa_slave_port_attr_set, a driver may return -EOPNOTSUPP from the commit phase of a STP state, which triggers a WARN() from switchdev. This happened on a 6185 switch which does not support hardware bridging. Reported-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by:
-
David Ahern authored
Add support for filtering neighbor dumps by master device by adding the NDA_MASTER attribute to the dump request. A new netlink flag, NLM_F_DUMP_FILTERED, is added to indicate the kernel supports the request and output is filtered as requested. Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Eric Dumazet authored
tcp_v6_md5_do_lookup() now takes a const socket, even if CONFIG_TCP_MD5SIG is not set. Fixes: b83e3deb ("tcp: md5: constify tcp_md5_do_lookup() socket argument") From: Eric Dumazet <edumazet@google.com> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
David S. Miller authored
Vivien Didelot says: ==================== net: switchdev: use specific switchdev_obj_* This patchset changes switchdev add, del, dump operations from this: int (*switchdev_port_obj_add)(struct net_device *dev, struct switchdev_obj *obj, struct switchdev_trans *trans); int (*switchdev_port_obj_del)(struct net_device *dev, struct switchdev_obj *obj); int (*switchdev_port_obj_dump)(struct net_device *dev, struct switchdev_obj *obj); to something similar to the notifier_call callback of a notifier_block: int (*switchdev_port_obj_add)(struct net_device *dev, enum switchdev_obj_id id, const void *obj, struct switchdev_trans *trans); int (*switchdev_port_obj_del)(struct net_device *dev, enum switchdev_obj_id id, const void *obj); int (*switchdev_port_obj_dump)(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure (e.g. switchdev_obj_fdb) instead of the generic switchdev_obj one. This will simplify pushing the callback function down to the drivers. The first 3 patches get rid of the dev parameter of the dump callback, since it is not always neeeded (e.g. vlan_dump) and some drivers (such as DSA drivers) may not have easy access to it. Patches 4 and 5 implement the change in the switchdev operations and its users. Patch 6 extracts the inner switchdev_obj_* structures from switchdev_obj and removes this last one. v2: fix error spotted by kbuild (extra ';' inline switchdev_port_obj_dump). ==================== Signed-off-by: -
Vivien Didelot authored
Now that switchdev and its drivers directly use specific switchdev_obj_* structures, move them out of the switchdev_obj union and get rif of this outer structure. Signed-off-by:
-
Vivien Didelot authored
Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev add and del operations to: int switchdev_port_obj_add/del(struct net_device *dev, enum switchdev_obj_id id, void *obj); This allows the caller to pass a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of these operations and switchdev have been changed accordingly. Signed-off-by: -
Vivien Didelot authored
Similar to the notifier_call callback of a notifier_block, change the function signature of switchdev dump operation to: int switchdev_port_obj_dump(struct net_device *dev, enum switchdev_obj_id id, void *obj, int (*cb)(void *obj)); This allows the caller to pass and expect back a specific switchdev_obj_* structure instead of the generic switchdev_obj one. Drivers implementation of dump operation can now expect this specific structure and call the callback with it. Drivers have been changed accordingly. Signed-off-by: -
Vivien Didelot authored
The net_device associated to a dump operation does not have to be passed to the callback. switchdev stores it in a superset struct, if needed. Also some drivers (such as DSA drivers) may not have easy access to it. This will simplify pushing the callback function down to the drivers. Signed-off-by:
-
Vivien Didelot authored
The FDB dump callback requires the related net_device so move it to the struct switchdev_fdb_dump superset instead of using a callback param. With this done, it'll be simpler to change the dump function signature. Signed-off-by:
-
Vivien Didelot authored
The static switchdev_port_vlan_dump_put function does not need the net_device parameter, so remove it. Signed-off-by:
-
David S. Miller authored
Geert Uytterhoeven says: ==================== net: m68k: Allow modular build This patch series makes the remaining m68k Ethernet drivers modular. It's an alternative to the last 3 patches of Paul Gortmaker's series "[PATCH net-next 0/6] make non-modular code explicitly non-modular". Note that "[PATCH 5/5] net: macmace: Allow modular build" depends on "[PATCH 4/5] m68k/mac: Export Peripheral System Controller (PSC) base address to modules". Feel free to take the dependency through the netdev tree to avoid modular build breakage. This was compile-tested only (mac_defconfig + allmodconfig) due to lack of hardware. ==================== Signed-off-by: -
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_MACMACE=m: ERROR: psc [drivers/net/ethernet/apple/macmace.ko] undefined! Add the missing export to fix this. Signed-off-by: -
Geert Uytterhoeven authored
Signed-off-by:
-
Geert Uytterhoeven authored
If CONFIG_HPLANCE=m and CONFIG_NET_POLL_CONTROLLER=y: ERROR: "lance_poll" [drivers/net/ethernet/amd/hplance.ko] undefined! Add the missing export to fix this. Signed-off-by: -
Geert Uytterhoeven authored
The modular driver supports only one card, just like the built-in driver. Note that this limitation is a problem which affects all Nubus card drivers, because they have to do all their own bus matching, because Nubus still lacks the necessary driver model support. Suggested-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Andrew Lunn authored
commit dea87024 ("dsa: mv88e6xxx: Allow speed/duplex of port to be configured") leads to the following static checker warning: drivers/net/dsa/mv88e6xxx.c:585 mv88e6xxx_adjust_link() warn: unsigned 'ret' is never less than zero. drivers/net/dsa/mv88e6xxx.c 573 void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port, 574 struct phy_device *phydev) 575 { 576 struct mv88e6xxx_priv_state *ps = ds_to_priv(ds); 577 u32 ret, reg; 578 579 if (!phy_is_pseudo_fixed_link(phydev)) 580 return; 581 582 mutex_lock(&ps->smi_mutex); 583 584 ret = _mv88e6xxx_reg_read(ds, REG_PORT(port), PORT_PCS_CTRL); 585 if (ret < 0) Make ret an int, which is the return type for _mv88e6xxx_reg_read() Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
David S. Miller authored
David Ahern says: ==================== net: L3 master device The VRF device is essentially a Layer 3 master device used to associate netdevices with a specific routing table and to influence FIB lookups via 'ip rules' and controlling the oif/iif used for the lookup. This series generalizes the VRF into L3 master device, l3mdev. Similar to switchdev it has a Kconfig option and separate set of operations in net_device allowing it to be completely compiled out if not wanted. The l3mdev methods rely on the 'master' aspect and use of netdev_master_upper_dev_get_rcu to retrieve the master device from a given netdevice if it is enslaved to an L3_MASTER. The VRF device is converted to use the l3mdev operations. At the end the vrf_ptr is no longer and removed, as are all direct references to VRF. The end result is a much simpler implementation for VRF. Thanks to Nikolay for suggestions (eg., use of the master linkage which is the key to making this work) and to Roopa, Andy and Shrijeet for early reviews. v3 - added license header to l3mdev.c - export symbols in l3mdev.c for use with GPL modules - removed netdevice header from l3mdev.h (not needed) and fixed typo in comment v2 - rebased to top of net-next - addressed Niks comments (checking master, removing extra lines, and flipping the order of patches 1 and 2) ==================== Signed-off-by: -
David Ahern authored
Change CONFIG dependency to CONFIG_NET_L3_MASTER_DEV as well. Signed-off-by:
-
David Ahern authored
Move remaining structs to VRF driver and delete the vrf header file. Signed-off-by:
-
David Ahern authored
Signed-off-by:
-
David Ahern authored
Replace calls to vrf_dev_get_rth with l3mdev_get_rtable. The check on the flow flags is handled in the l3mdev operation. Signed-off-by:
-
David Ahern authored
Replace calls to vrf_dev_table and friends with l3mdev_fib_table and kin. Signed-off-by:
-
David Ahern authored
Replace calls to vrf_master_ifindex_rcu and vrf_master_ifindex with either l3mdev_master_ifindex_rcu or l3mdev_master_ifindex. The pattern: oif = vrf_master_ifindex(dev) ? : dev->ifindex; is replaced with oif = l3mdev_fib_oif(dev); And remove the now unused vrf macros. Signed-off-by: -
David Ahern authored
Signed-off-by:
-
David Ahern authored
L3 master devices allow users of the abstraction to influence FIB lookups for enslaved devices. Current API provides a means for the master device to return a specific FIB table for an enslaved device, to return an rtable/custom dst and influence the OIF used for fib lookups. Signed-off-by:
-
David Ahern authored
Rename IFF_VRF_MASTER to IFF_L3MDEV_MASTER and update the name of the netif_is_vrf and netif_index_is_vrf macros. Signed-off-by:
-
