info is in network byte order, change it back to host byte order
before use. In particular, the current code sets the MTU of the tunnel
to a wrong (too big) value.

Fixes: c12b395a ("gre: Support GRE over IPv6")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After d75b1ade ("net: less interrupt masking in NAPI")
driver's NAPI poll routine is expected to return
exact budget value if it wants to be re-called.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Fixes: d75b1ade ("net: less interrupt masking in NAPI")
Signed-off-by: David S. Miller <davem@davemloft.net>

The RSS support requires enablement based on the features reported by
the hardware. The setting of this flag is missing. Add support to
set the RSS enablement flag based on the reported hardware features.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The number of traffic classes reported by the hardware is zero-based
so increment the value returned to get an actual count.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In tcf_exts_dump_stats(), ensure that exts->actions is not empty before
accessing the first element of that list and calling tcf_action_copy_stats()
on it.  This fixes some random segvs when adding filters of type "basic" with
no particular action.

This also fixes the dumping of those "no-action" filters, which more often
than not made calls to tcf_action_copy_stats() fail and consequently netlink
attributes added by the caller to be removed by a call to nla_nest_cancel().

Fixes: 33be6271 ("net_sched: act: use standard struct list_head")
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Acked-by: Cong Wang <cwang@twopensource.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Configuring fq with quantum 0 hangs the system, presumably because of a
non-interruptible infinite loop. Either way quantum 0 does not make sense.

Reproduce with:
sudo tc qdisc add dev lo root fq quantum 0 initial_quantum 0
ping 127.0.0.1
Signed-off-by: Kenneth Klette Jonassen <kennetkl@ifi.uio.no>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Max unacked packets/bytes is an int while sizeof(long) was used in the
sysctl table.

This means that when they were getting read we'd also leak kernel memory
to userspace along with the timeout values.
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In virtio 1.0 mode, when mergeable buffers are enabled on a big-endian
host, num_buffers wasn't byte-swapped correctly, so large incoming
packets got corrupted.

To fix, fill it in within hdr - this also makes sure it gets
the correct type.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch correct the bad expression while writing the
bit-pattern from software's buffer to hardware registers.
Signed-off-by: Sanjeev Sharma <Sanjeev_Sharma@mentor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commone register macors (e.g. RSR) is too commont to drivers, it may
be conflict with the architectures (e.g. xtensa, sh).

The related warnings (with allmodconfig under xtensa):

    CC [M]  drivers/net/usb/sr9700.o
  In file included from drivers/net/usb/sr9700.c:24:0:
  drivers/net/usb/sr9700.h:65:0: warning: "RSR" redefined
   #define RSR   0x06
   ^
  In file included from ./arch/xtensa/include/asm/bitops.h:22:0,
                   from include/linux/bitops.h:36,
                   from include/linux/kernel.h:10,
                   from include/linux/list.h:8,
                   from include/linux/module.h:9,
                   from drivers/net/usb/sr9700.c:13:
  ./arch/xtensa/include/asm/processor.h:190:0: note: this is the location of the previous definition
   #define RSR(v,sr) __asm__ __volatile__ ("rsr %0,"__stringify(sr) : "=a"(v));
   ^
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vladislav Yasevich says:

====================
Restore UFO support to virtio_net devices

commit 3d0ad094
Author: Ben Hutchings <ben@decadent.org.uk>
Date:   Thu Oct 30 18:27:12 2014 +0000

    drivers/net: Disable UFO through virtio

Turned off UFO support to virtio-net based devices due to issues
with IPv6 fragment id generation for UFO packets.  The issue
was that IPv6 UFO/GSO implementation expects the fragment id
to be supplied in skb_shinfo().  However, for packets generated
by the VMs, the fragment id is not supplied which causes all
IPv6 fragments to have the id of 0.

The problem is that turning off UFO support on tap/macvtap
as well as virtio devices caused issues with migrations.
Migrations would fail when moving a vm from a kernel supporting
expecting UFO to work to the newer kernels that disabled UFO.

This series provides a partial solution to address the migration
issue.  The series allows us to track whether skb_shinfo()->ip6_frag_id
has been set by treating value of 0 as unset.
This lets GSO code to generate fragment ids if they are necessary
(ex: packet was generated by VM or packet socket).

Since v3:
  - Resolved build issue when IPv6 is a module.
  - Removed trailing white space.

Since v2:
  - Rebase and rebuild to make sure everything works.  No changes
    to the patches were done.

Since v1:
  - Removed the skb bit and use value of 0 as tracker.
  - Used Eric's suggestion to set fragment id as 0x80000000 if id
    generation procedure yeilded a 0 result.
  - Consolidated ipv6 id genration code.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 3d0ad094.

Now that GSO functionality can correctly track if the fragment
id has been selected and select a fragment id if necessary,
we can re-enable UFO on tap/macvap and virtio devices.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 5188cd44.

Now that GSO layer can track if fragment id has been selected
and can allocate one if necessary, we don't need to do this in
tap and macvtap.  This reverts most of the code and only keeps
the new ipv6 fragment id generation function that is still needed.

Fixes: 3d0ad094 (drivers/net: Disable UFO through virtio)
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the IPv6 fragment id has not been set and we perform
fragmentation due to UFO, select a new fragment id.
We now consider a fragment id of 0 as unset and if id selection
process returns 0 (after all the pertrubations), we set it to
0x80000000, thus giving us ample space not to create collisions
with the next packet we may have to fragment.

When doing UFO integrity checking, we also select the
fragment id if it has not be set yet.   This is stored into
the skb_shinfo() thus allowing UFO to function correclty.

This patch also removes duplicate fragment id generation code
and moves ipv6_select_ident() into the header as it may be
used during GSO.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After commit e9d8b2c2 (xen-netback:
disable rogue vif in kthread context), a fatal (protocol) error would
leave the guest Rx thread spinning, wasting CPU time.  Commit
ecf08d2d (xen-netback: reintroduce
guest Rx stall detection) made this even worse by removing a
cond_resched() from this path.

Since a fatal error is non-recoverable, just allow the guest Rx thread
to exit.  This requires taking additional refs to the task so the
thread exiting early is handled safely.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reported-by: Julien Grall <julien.grall@linaro.org>
Tested-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit de966c59 (net/mlx4_core: Support more than 64 VFs) was meant to
allow up to 126 VFs.  However, due to leaving MLX4_MFUNC_MAX too low, using
more than 80 VFs resulted in memory corruptions (and Oopses) when more than
80 VFs were requested. In addition, the number of slaves was left too high.

This commit fixes these issues.

Fixes: de966c59 ("net/mlx4_core: Support more than 64 VFs")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bug here is that we use "Reject" as the index into the cau_t[] array
in the else path.  Since the cau_t[] has 9 elements if Reject == 9 then
we are reading beyond the end of the array.

My understanding of the code is that it's saying that if Reject is 1 or
too high then that's invalid and we should hang up.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for your net tree,
they are:

1) Validate hooks for nf_tables NAT expressions, otherwise users can
   crash the kernel when using them from the wrong hook. We already
   got one user trapped on this when configuring masquerading.

2) Fix a BUG splat in nf_tables with CONFIG_DEBUG_PREEMPT=y. Reported
   by Andreas Schultz.

3) Avoid unnecessary reroute of traffic in the local input path
   in IPVS that triggers a crash in in xfrm. Reported by Florian
   Wiessner and fixes by Julian Anastasov.

4) Fix memory and module refcount leak from the error path of
   nf_tables_newchain().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Update netlink_mmap.txt wrt. commit 4682a035
("netlink: Always copy on mmap TX.").
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a bug where vnet_skb_shape() didn't set the already-selected
queue mapping when a packet copy was required. This results in using the
wrong queue index for stops/starts, hung tx queues and watchdog timeouts
under heavy load.
Signed-off-by: David L Stevens <david.stevens@oracle.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently qlge_update_hw_vlan_features() will always first put the
interface down, then update features and then bring it up again. But it
is possible to hit this code while the adapter is down and this causes a
non-paired call to napi_disable(), which will get stuck.

This patch fixes it by skipping these down/up actions if the interface
is already down.

Fixes: a45adbe8 ("qlge: Enhance nested VLAN (Q-in-Q) handling.")
Cc: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In commit be9f4a44 ("ipv4: tcp: remove per net tcp_sock")
I tried to address contention on a socket lock, but the solution
I chose was horrible :

commit 3a7c384f ("ipv4: tcp: unicast_sock should not land outside
of TCP stack") addressed a selinux regression.

commit 0980e56e ("ipv4: tcp: set unicast_sock uc_ttl to -1")
took care of another regression.

commit b5ec8eea ("ipv4: fix ip_send_skb()") fixed another regression.

commit 811230cd ("tcp: ipv4: initialize unicast_sock sk_pacing_rate")
was another shot in the dark.

Really, just use a proper socket per cpu, and remove the skb_orphan()
call, to re-enable flow control.

This solves a serious problem with FQ packet scheduler when used in
hostile environments, as we do not want to allocate a flow structure
for every RST packet sent in response to a spoofed packet.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Doing the following commands on a non idle network device
panics the box instantly, because cpu_bstats gets overwritten
by stats.

tc qdisc add dev eth0 root <your_favorite_qdisc>
... some traffic (one packet is enough) ...
tc qdisc replace dev eth0 root est 1sec 4sec <your_favorite_qdisc>

[  325.355596] BUG: unable to handle kernel paging request at ffff8841dc5a074c
[  325.362609] IP: [<ffffffff81541c9e>] __gnet_stats_copy_basic+0x3e/0x90
[  325.369158] PGD 1fa7067 PUD 0
[  325.372254] Oops: 0000 [#1] SMP
[  325.375514] Modules linked in: ...
[  325.398346] CPU: 13 PID: 14313 Comm: tc Not tainted 3.19.0-smp-DEV #1163
[  325.412042] task: ffff8800793ab5d0 ti: ffff881ff2fa4000 task.ti: ffff881ff2fa4000
[  325.419518] RIP: 0010:[<ffffffff81541c9e>]  [<ffffffff81541c9e>] __gnet_stats_copy_basic+0x3e/0x90
[  325.428506] RSP: 0018:ffff881ff2fa7928  EFLAGS: 00010286
[  325.433824] RAX: 000000000000000c RBX: ffff881ff2fa796c RCX: 000000000000000c
[  325.440988] RDX: ffff8841dc5a0744 RSI: 0000000000000060 RDI: 0000000000000060
[  325.448120] RBP: ffff881ff2fa7948 R08: ffffffff81cd4f80 R09: 0000000000000000
[  325.455268] R10: ffff883ff223e400 R11: 0000000000000000 R12: 000000015cba0744
[  325.462405] R13: ffffffff81cd4f80 R14: ffff883ff223e460 R15: ffff883feea0722c
[  325.469536] FS:  00007f2ee30fa700(0000) GS:ffff88407fa20000(0000) knlGS:0000000000000000
[  325.477630] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  325.483380] CR2: ffff8841dc5a074c CR3: 0000003feeae9000 CR4: 00000000001407e0
[  325.490510] Stack:
[  325.492524]  ffff883feea0722c ffff883fef719dc0 ffff883feea0722c ffff883ff223e4a0
[  325.499990]  ffff881ff2fa79a8 ffffffff815424ee ffff883ff223e49c 000000015cba0744
[  325.507460]  00000000f2fa7978 0000000000000000 ffff881ff2fa79a8 ffff883ff223e4a0
[  325.514956] Call Trace:
[  325.517412]  [<ffffffff815424ee>] gen_new_estimator+0x8e/0x230
[  325.523250]  [<ffffffff815427aa>] gen_replace_estimator+0x4a/0x60
[  325.529349]  [<ffffffff815718ab>] tc_modify_qdisc+0x52b/0x590
[  325.535117]  [<ffffffff8155edd0>] rtnetlink_rcv_msg+0xa0/0x240
[  325.540963]  [<ffffffff8155ed30>] ? __rtnl_unlock+0x20/0x20
[  325.546532]  [<ffffffff8157f811>] netlink_rcv_skb+0xb1/0xc0
[  325.552145]  [<ffffffff8155b355>] rtnetlink_rcv+0x25/0x40
[  325.557558]  [<ffffffff8157f0d8>] netlink_unicast+0x168/0x220
[  325.563317]  [<ffffffff8157f47c>] netlink_sendmsg+0x2ec/0x3e0

Lets play safe and not use an union : percpu 'pointers' are mostly read
anyway, and we have typically few qdiscs per host.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Fixes: 22e0f8b9 ("net: sched: make bstats per cpu and estimator RCU safe")
Signed-off-by: David S. Miller <davem@davemloft.net>

The existing code frees the skb in EAGAIN case, in which the skb will be
retried from upper layer and used again.
Also, the existing code doesn't free send buffer slot in error case, because
there is no completion message for unsent packets.
This patch fixes these problems.

(Please also include this patch for stable trees. Thanks!)
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the following kernel crash,

	WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_input.c:3079 tcp_clean_rtx_queue+0x658/0x80c()
	Call trace:
	[<fffffe0000096b7c>] dump_backtrace+0x0/0x184
	[<fffffe0000096d10>] show_stack+0x10/0x1c
	[<fffffe0000685ea0>] dump_stack+0x74/0x98
	[<fffffe00000b44e0>] warn_slowpath_common+0x88/0xb0
	[<fffffe00000b461c>] warn_slowpath_null+0x14/0x20
	[<fffffe00005b5c1c>] tcp_clean_rtx_queue+0x654/0x80c
	[<fffffe00005b6228>] tcp_ack+0x454/0x688
	[<fffffe00005b6ca8>] tcp_rcv_established+0x4a4/0x62c
	[<fffffe00005bf4b4>] tcp_v4_do_rcv+0x16c/0x350
	[<fffffe00005c225c>] tcp_v4_rcv+0x8e8/0x904
	[<fffffe000059d470>] ip_local_deliver_finish+0x100/0x26c
	[<fffffe000059dad8>] ip_local_deliver+0xac/0xc4
	[<fffffe000059d6c4>] ip_rcv_finish+0xe8/0x328
	[<fffffe000059dd3c>] ip_rcv+0x24c/0x38c
	[<fffffe0000563950>] __netif_receive_skb_core+0x29c/0x7c8
	[<fffffe0000563ea4>] __netif_receive_skb+0x28/0x7c
	[<fffffe0000563f54>] netif_receive_skb_internal+0x5c/0xe0
	[<fffffe0000564810>] napi_gro_receive+0xb4/0x110
	[<fffffe0000482a2c>] xgene_enet_process_ring+0x144/0x338
	[<fffffe0000482d18>] xgene_enet_napi+0x1c/0x50
	[<fffffe0000565454>] net_rx_action+0x154/0x228
	[<fffffe00000b804c>] __do_softirq+0x110/0x28c
	[<fffffe00000b8424>] irq_exit+0x8c/0xc0
	[<fffffe0000093898>] handle_IRQ+0x44/0xa8
	[<fffffe000009032c>] gic_handle_irq+0x38/0x7c
	[...]

Software writes poison data into the descriptor bytes[15:8] and upon
receiving the interrupt, if those bytes are overwritten by the hardware with
the valid data, software also reads bytes[7:0] and executes receive/tx
completion logic.

If the CPU executes the above two reads in out of order fashion, then the
bytes[7:0] will have older data and causing the kernel panic.  We have to
force the order of the reads and thus this patch introduces read memory
barrier between these reads.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Toshiaki Makita says:

====================
Fix checksum error when using stacked vlan

When I was testing 802.1ad, I found several drivers don't take into
account 802.1ad or multiple vlans when retrieving L3 (IP/IPv6) or
L4 (TCP/UDP) protocol for checksum offload.

It is mainly due to vlan_get_protocol(), which extracts ether type only
when it is tagged with single 802.1Q. When 802.1ad is used or there are
multiple vlans, it extracts vlan protocol and drivers cannot determine
which L3/L4 protocol is used.

Those drivers, most of which have IP_CSUM/IPV6_CSUM features, get L3/L4
header-offset by software, so it seems that their checksum offload works
with multiple vlans if we can parse protocols correctly.
(They know mac header length, and probably don't care about what is in it.)

And another thing, some of Intel's drivers seem to use skb->protocol where
vlan_get_protocol() is more suitable.

I tested that at least igb/igbvf on I350 works with this patch set.

Note:
We can hand a double tagged packet with CHECKSUM_PARTIAL to a HW driver
by creating a vlan device on a bridge device and enabling vlan_filtering
of the bridge with 802.1ad protocol.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When a skb has multiple vlans and it is CHECKSUM_PARTIAL,
ixgbevf_tx_csum() fails to get the network protocol and checksum related
descriptor fields are not configured correctly because skb->protocol
doesn't show the L3 protocol in this case.

Use first->protocol instead of skb->protocol to get the proper network
protocol.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a skb has multiple vlans and it is CHECKSUM_PARTIAL,
ixgbe_tx_csum() fails to get the network protocol and checksum related
descriptor fields are not configured correctly because skb->protocol
doesn't show the L3 protocol in this case.

Use vlan_get_protocol() to get the proper network protocol.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a skb has multiple vlans and it is CHECKSUM_PARTIAL,
igbvf_tx_csum() fails to get the network protocol and checksum related
descriptor fields are not configured correctly because skb->protocol
doesn't show the L3 protocol in this case.

Use vlan_get_protocol() to get the proper network protocol.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

vlan_get_protocol() could not get network protocol if a skb has a 802.1ad
vlan tag or multiple vlans, which caused incorrect checksum calculation
in several drivers.

Fix vlan_get_protocol() to retrieve network protocol instead of incorrect
vlan protocol.

As the logic is the same as skb_network_protocol(), create a common helper
function __vlan_get_protocol() and call it from existing functions.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

When making use of RFC5061, section 4.2.4. for setting the primary IP
address, we're passing a wrong parameter header to param_type2af(),
resulting always in NULL being returned.

At this point, param.p points to a sctp_addip_param struct, containing
a sctp_paramhdr (type = 0xc004, length = var), and crr_id as a correlation
id. Followed by that, as also presented in RFC5061 section 4.2.4., comes
the actual sctp_addr_param, which also contains a sctp_paramhdr, but
this time with the correct type SCTP_PARAM_IPV{4,6}_ADDRESS that
param_type2af() can make use of. Since we already hold a pointer to
addr_param from previous line, just reuse it for param_type2af().

Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT")
Signed-off-by: Saran Maruti Ramanara <saran.neti@telus.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The subscription bitmask passed via struct sockaddr_nl is converted to
the group number when calling the netlink_bind() and netlink_unbind()
callbacks.

The conversion is however incorrect since bitmask (1 << 0) needs to be
mapped to group number 1. Note that you cannot specify the group number 0
(usually known as _NONE) from setsockopt() using NETLINK_ADD_MEMBERSHIP
since this is rejected through -EINVAL.

This problem became noticeable since 97840cb6 ("netfilter: nfnetlink:
fix insufficient validation in nfnetlink_bind") when binding to bitmask
(1 << 0) in ctnetlink.
Reported-by: Andre Tomt <andre@tomt.net>
Reported-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Release statistics and module refcount on memory allocation problems.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

commit f5a41847 ("ipvs: move ip_route_me_harder for ICMP")
from 2.6.37 introduced ip_route_me_harder() call for responses to
local clients, so that we can provide valid rt_src after SNAT.
It was used by TCP to provide valid daddr for ip_send_reply().
After commit 0a5ebb80 ("ipv4: Pass explicit daddr arg to
ip_send_reply()." from 3.0 this rerouting is not needed anymore
and should be avoided, especially in LOCAL_IN.

Fixes 3.12.33 crash in xfrm reported by Florian Wiessner:
"3.12.33 - BUG xfrm_selector_match+0x25/0x2f6"
Reported-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de>
Tested-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>

RFC 1191 said, "a host MUST not increase its estimate of the Path
MTU in response to the contents of a Datagram Too Big message."
Signed-off-by: Li Wei <lw@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Arnd Bergmann says:

====================
net: driver fixes from arm randconfig builds

These four patches are fallout from test builds on ARM. I have a
few more of them in my backlog but have not yet confirmed them
to still be valid.

The first three patches are about incomplete dependencies on
old drivers. One could backport them to the beginning of time
in theory, but there is little value since nobody would run into
these problems.

The final patch is one I had submitted before together with the
respective pcmcia patch but forgot to follow up on that. It's
still a valid but relatively theoretical bug, because the previous
behavior of the driver was just as broken as what we have in
mainline.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

A recent patch tried to work around a valid warning for the use of a
deprecated interface by blindly changing from the old
pcmcia_request_exclusive_irq() interface to pcmcia_request_irq().

This driver has an interrupt handler that is not currently aware
of shared interrupts, but can be easily converted to be.
At the moment, the driver reads the interrupt status register
repeatedly until it contains only zeroes in the interesting bits,
and handles each bit individually.

This patch adds the missing part of returning IRQ_NONE in case none
of the bits are set to start with, so we can move on to the next
interrupt source.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 5f5316fc ("am2150: Update nmclan_cs.c to use update PCMCIA API")
Signed-off-by: David S. Miller <davem@davemloft.net>

The ni65 and lance ethernet drivers manually program the ISA DMA
controller that is only available on x86 PCs and a few compatible
systems. Trying to build it on ARM results in this error:

ni65.c: In function 'ni65_probe1':
ni65.c:496:62: error: 'DMA1_STAT_REG' undeclared (first use in this function)
     ((inb(DMA1_STAT_REG) >> 4) & 0x0f)
                                                              ^
ni65.c:496:62: note: each undeclared identifier is reported only once for each function it appears in
ni65.c:497:63: error: 'DMA2_STAT_REG' undeclared (first use in this function)
     | (inb(DMA2_STAT_REG) & 0xf0);

The DMA1_STAT_REG and DMA2_STAT_REG registers are only defined for
alpha, mips, parisc, powerpc and x86, although it is not clear
which subarchitectures actually have them at the correct location.

This patch for now just disables it for ARM, to avoid randconfig
build errors. We could also decide to limit it to the set of
architectures on which it does compile, but that might look more
deliberate than guessing based on where the drivers build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cosa driver is rather outdated and does not get built on most
platforms because it requires the ISA_DMA_API symbol. However
there are some ARM platforms that have ISA_DMA_API but no virt_to_bus,
and they get this build error when enabling the ltpc driver.

drivers/net/wan/cosa.c: In function 'tx_interrupt':
drivers/net/wan/cosa.c:1768:3: error: implicit declaration of function 'virt_to_bus'
   unsigned long addr = virt_to_bus(cosa->txbuf);
   ^

The same problem exists for the Hostess SV-11 and Sealevel Systems 4021
drivers.

This adds another dependency in Kconfig to avoid that configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The cs89x0 driver can either be built as an ISA driver or a platform
driver, the choice is controlled by the CS89x0_PLATFORM Kconfig
symbol. Building the ISA driver on a system that does not have
a way to map I/O ports fails with this error:

drivers/built-in.o: In function `cs89x0_ioport_probe.constprop.1':
:(.init.text+0x4794): undefined reference to `ioport_map'
:(.init.text+0x4830): undefined reference to `ioport_unmap'

This changes the Kconfig logic to take that option away and
always force building the platform variant of this driver if
CONFIG_HAS_IOPORT_MAP is not set. This is the only correct
choice in this case, and it avoids the build error.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>