- 28 Nov, 2019 13 commits
-
-
Takashi Sakamoto authored
[ Upstream commit 51e68fb0 ] In some error paths, reference count of firewire unit is not decreased. This commit fixes the bug. Fixes: 5b14ec25('ALSA: firewire: release reference count of firewire unit in .remove callback of bus driver') Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Adrian Bunk authored
[ Upstream commit 65a576e2 ] NL80211_TX_POWER_LIMITED was treated as NL80211_TX_POWER_AUTOMATIC, which is the opposite of what should happen and can cause nasty regulatory problems. if/else converted to a switch without default to make gcc warn on unhandled enum values. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hans de Goede authored
[ Upstream commit 401fee81 ] Commit 78f3ac76 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") causes the backlight to be permanently off on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC 1015BX, Asus EeePC 1025C). The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added by that commit is made conditional in this commit and only enabled in the quirk_entry structs in the asus-nb-wmi driver fixing the broken display / backlight on various EeePC laptop models. Cc: João Paulo Rechi Vita <jprvita@endlessm.com> Fixes: 78f3ac76 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kiernan Hager authored
[ Upstream commit db2582af ] This patch adds support for ALS on the Zenbook UX430UQ to the asus_nb_wmi driver. It also renames "quirk_asus_ux330uak" to "quirk_asus_forceals" because it is now used for more than one model of computer, and should thus have a more general name. Signed-off-by:
Kiernan Hager <kah.listaddress@gmail.com> [andy: massaged commit message, fixed indentation and commas in the code] Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andrey Ryabinin authored
commit 9a63236f upstream. It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in remove_stable_node() when it races with __mmput() and squeezes in between ksm_exit() and exit_mmap(). WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150 Call Trace: remove_all_stable_nodes+0x12b/0x330 run_store+0x4ef/0x7b0 kernfs_fop_write+0x200/0x420 vfs_write+0x154/0x450 ksys_write+0xf9/0x1d0 do_syscall_64+0x99/0x510 entry_SYSCALL_64_after_hwframe+0x49/0xbe Remove the warning as there is nothing scary going on. Link: http://lkml.kernel.org/r/20191119131850.5675-1-aryabinin@virtuozzo.com Fixes: cbf86cfe ("ksm: remove old stable nodes more thoroughly") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joseph Qi authored
commit 94b07b6f upstream. This reverts commit 56e94ea1. Commit 56e94ea1 ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()") introduces a regression that fail to create directory with mount option user_xattr and acl. Actually the reported NULL pointer dereference case can be correctly handled by loc->xl_ops->xlo_add_entry(), so revert it. Link: http://lkml.kernel.org/r/1573624916-83825-1-git-send-email-joseph.qi@linux.alibaba.com Fixes: 56e94ea1 ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()") Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by:
Thomas Voegtle <tv@lio96.de> Acked-by:
Changwei Ge <gechangwei@live.cn> Cc: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Laura Abbott authored
commit 0161a94e upstream. gpio tools fail to build correctly with make parallelization: $ make -s -j24 ld: gpio-utils.o: file not recognized: file truncated make[1]: *** [/home/labbott/linux_upstream/tools/build/Makefile.build:145: lsgpio-in.o] Error 1 make: *** [Makefile:43: lsgpio-in.o] Error 2 make: *** Waiting for unfinished jobs.... This is because gpio-utils.o is used across multiple targets. Fix this by making gpio-utios.o a proper dependency. Cc: <stable@vger.kernel.org> Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thierry Reding authored
commit b0391479 upstream. When converting milliseconds to microseconds in commit fffa6af9 ("gpio: max77620: Use correct unit for debounce times") some ~1 ms gaps were introduced between the various ranges supported by the controller. Fix this by changing the start of each range to the value immediately following the end of the previous range. This way a debounce time of, say 8250 us will translate into 16 ms instead of returning an -EINVAL error. Typically the debounce delay is only ever set through device tree and specified in milliseconds, so we can never really hit this issue because debounce times are always a multiple of 1000 us. The only notable exception for this is drivers/mmc/host/mmc-spi.c where the CD GPIO is requested, which passes a 1 us debounce time. According to a comment preceeding that code this should actually be 1 ms (i.e. 1000 us). Reported-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
Thierry Reding <treding@nvidia.com> Acked-by:
Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Davide Caratti authored
[ Upstream commit f67169fe ] when configuring act_pedit rules, the number of keys is validated only on addition of a new entry. This is not sufficient to avoid hitting a WARN() in the traffic path: for example, it is possible to replace a valid entry with a new one having 0 extended keys, thus causing splats in dmesg like: pedit BUG: index 42 WARNING: CPU: 2 PID: 4054 at net/sched/act_pedit.c:410 tcf_pedit_act+0xc84/0x1200 [act_pedit] [...] RIP: 0010:tcf_pedit_act+0xc84/0x1200 [act_pedit] Code: 89 fa 48 c1 ea 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ac 00 00 00 48 8b 44 24 10 48 c7 c7 a0 c4 e4 c0 8b 70 18 e8 1c 30 95 ea <0f> 0b e9 a0 fa ff ff e8 00 03 f5 ea e9 14 f4 ff ff 48 89 58 40 e9 RSP: 0018:ffff888077c9f320 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffac2983a2 RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888053927bec RBP: dffffc0000000000 R08: ffffed100a726209 R09: ffffed100a726209 R10: 0000000000000001 R11: ffffed100a726208 R12: ffff88804beea780 R13: ffff888079a77400 R14: ffff88804beea780 R15: ffff888027ab2000 FS: 00007fdeec9bd740(0000) GS:ffff888053900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffdb3dfd000 CR3: 000000004adb4006 CR4: 00000000001606e0 Call Trace: tcf_action_exec+0x105/0x3f0 tcf_classify+0xf2/0x410 __dev_queue_xmit+0xcbf/0x2ae0 ip_finish_output2+0x711/0x1fb0 ip_output+0x1bf/0x4b0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x180c/0x2430 sock_sendmsg+0xdb/0x110 __sys_sendto+0x257/0x2b0 __x64_sys_sendto+0xdd/0x1b0 do_syscall_64+0xa5/0x4e0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fdeeb72e993 Code: 48 8b 0d e0 74 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 0d d6 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24 RSP: 002b:00007ffdb3de8a18 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055c81972b700 RCX: 00007fdeeb72e993 RDX: 0000000000000040 RSI: 000055c81972b700 RDI: 0000000000000003 RBP: 00007ffdb3dea130 R08: 000055c819728510 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 R13: 000055c81972b6c0 R14: 000055c81972969c R15: 0000000000000080 Fix this moving the check on 'nkeys' earlier in tcf_pedit_init(), so that attempts to install rules having 0 keys are always rejected with -EINVAL. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roi Dayan authored
[ Upstream commit 75102121 ] Before this commit the ndo always returned success. Fix that. Fixes: 1ab2068a ("net/mlx5: Implement vports admin state backup/restore") Signed-off-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Martin Habets authored
[ Upstream commit 723eb536 ] The workqueue only exists for the primary PF. For other functions we hit a WARN_ON in kernel/workqueue.c. Fixes: 7c236c43 ("sfc: Add support for IEEE-1588 PTP") Signed-off-by:
Martin Habets <mhabets@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
[ Upstream commit d658c8f56ec7b3de8051a24afb25da9ba3c388c5 ] The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luigi Rizzo authored
[ Upstream commit 34e59836 ] ethtool expects ETHTOOL_GRXCLSRLALL to set ethtool_rxnfc->data with the total number of entries in the rx classifier table. Surprisingly, mlx4 is missing this part (in principle ethtool could still move forward and try the insert). Tested: compiled and run command: phh13:~# ethtool -N eth1 flow-type udp4 queue 4 Added rule with ID 255 Signed-off-by:
Luigi Rizzo <lrizzo@google.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 Nov, 2019 27 commits
-
-
Greg Kroah-Hartman authored
-
Pavel Tatashin authored
commit 94bb804e upstream. A number of our uaccess routines ('__arch_clear_user()' and '__arch_copy_{in,from,to}_user()') fail to re-enable PAN if they encounter an unhandled fault whilst accessing userspace. For CPUs implementing both hardware PAN and UAO, this bug has no effect when both extensions are in use by the kernel. For CPUs implementing hardware PAN but not UAO, this means that a kernel using hardware PAN may execute portions of code with PAN inadvertently disabled, opening us up to potential security vulnerabilities that rely on userspace access from within the kernel which would usually be prevented by this mechanism. In other words, parts of the kernel run the same way as they would on a CPU without PAN implemented/emulated at all. For CPUs not implementing hardware PAN and instead relying on software emulation via 'CONFIG_ARM64_SW_TTBR0_PAN=y', the impact is unfortunately much worse. Calling 'schedule()' with software PAN disabled means that the next task will execute in the kernel using the page-table and ASID of the previous process even after 'switch_mm()', since the actual hardware switch is deferred until return to userspace. At this point, or if there is a intermediate call to 'uaccess_enable()', the page-table and ASID of the new process are installed. Sadly, due to the changes introduced by KPTI, this is not an atomic operation and there is a very small window (two instructions) where the CPU is configured with the page-table of the old task and the ASID of the new task; a speculative access in this state is disastrous because it would corrupt the TLB entries for the new task with mappings from the previous address space. As Pavel explains: | I was able to reproduce memory corruption problem on Broadcom's SoC | ARMv8-A like this: | | Enable software perf-events with PERF_SAMPLE_CALLCHAIN so userland's | stack is accessed and copied. | | The test program performed the following on every CPU and forking | many processes: | | unsigned long *map = mmap(NULL, PAGE_SIZE, PROT_READ|PROT_WRITE, | MAP_SHARED | MAP_ANONYMOUS, -1, 0); | map[0] = getpid(); | sched_yield(); | if (map[0] != getpid()) { | fprintf(stderr, "Corruption detected!"); | } | munmap(map, PAGE_SIZE); | | From time to time I was getting map[0] to contain pid for a | different process. Ensure that PAN is re-enabled when returning after an unhandled user fault from our uaccess routines. Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
Mark Rutland <mark.rutland@arm.com> Cc: <stable@vger.kernel.org> Fixes: 338d4f49 ("arm64: kernel: Add support for Privileged Access Never") Signed-off-by:
Pavel Tatashin <pasha.tatashin@soleen.com> [will: rewrote commit message] [will: backport for 4.9.y stable kernels] Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Roger Quadros authored
[ Upstream commit a763ecc1 ] OMAP5's Super-Speed USB port has a software mailbox register that needs to be fed with VBUS and ID events from an external VBUS/ID comparator. Without this, Host role will not work correctly. Fixes: 656c1a65 ("ARM: dts: omap5: enable OTG role for DWC3 controller") Reported-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Huibin Hong authored
[ Upstream commit dd8fd2cb ] The rxconf and txconf structs are allocated on the stack, so make sure we zero them before filling out the relevant fields. Signed-off-by:
Huibin Hong <huibin.hong@rock-chips.com> Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Felix Fietkau authored
[ Upstream commit 80df9be6 ] Fixes a harmless underflow issue when CCK rates are actively being used Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
zhong jiang authored
[ Upstream commit 3dac3583 ] It is not safe to dereference an object before a null test. It is not needed and just remove them. Ftrace can be used instead. Signed-off-by:
zhong jiang <zhongjiang@huawei.com> Acked-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Frederic Barrat <fbarrat@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nicolin Chen authored
[ Upstream commit 791ebc9d ] The three INA3221_CONFIG_MODE macros are not correctly defined here. The MODE3-1 bits are located at BIT 2-0 according to the datasheet. So this patch just fixes them by shifting all of them with a correct offset. However, this isn't a crital bug fix as the driver does not use any of them at this point. Signed-off-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Thierry Reding authored
[ Upstream commit 9f67f758 ] Probe deferrals aren't actual errors, so silence the error message in case the PWM cannot yet be acquired. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit 2978d873 ] Currently accessing various /sys/fs/orangefs files will spam the kernel log with the following info message when the client is not running: [ 491.489284] sysfs_service_op_show: Client not running :-5: Rate limit this info message to make it less spammy. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Mike Marshall <hubcap@omnibond.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Timothy E Baldwin authored
[ Upstream commit f18aef74 ] On at least x86 and ARM64, and as documented in the ptrace man page a skipped system call will still cause a syscall exit ptrace stop. Previous to this commit 32-bit ARM did not, resulting in strace being confused when seccomp skips system calls. This change also impacts programs that use ptrace to skip system calls. Fixes: ad75b514 ("ARM: 7579/1: arch/allow a scno of -1 to not cause a SIGILL") Signed-off-by:
Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk> Signed-off-by:
Eugene Syromyatnikov <evgsyr@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Tested-by:
Kees Cook <keescook@chromium.org> Tested-by:
Eugene Syromyatnikov <evgsyr@gmail.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Trent Piepho authored
[ Upstream commit 605b3bec ] spidev will make a big fuss if a device tree node binds a device by using "spidev" as the node's compatible property. However, the logic for this isn't looking for "spidev" in the compatible, but rather checking that the device is NOT compatible with spidev's list of devices. This causes a false positive if a device not named "rohm,dh2228fv", etc. binds to spidev, even if a means other than putting "spidev" in the device tree was used. E.g., the sysfs driver_override attribute. Signed-off-by:
Trent Piepho <tpiepho@impinj.com> Reviewed-by:
Jan Kundrát <jan.kundrat@cesnet.cz> Tested-by:
Jan Kundrát <jan.kundrat@cesnet.cz> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marek Vasut authored
[ Upstream commit 70728c29 ] The priv->data->set can be NULL while flags contains GPIO_SYSCON_FEAT_OUT and chip->set is valid pointer. This happens in case the controller uses the default GPIO setter. Always use chip->set to access the setter to avoid possible NULL pointer dereferencing. Signed-off-by:
Marek Vasut <marex@denx.de> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Bjorn Helgaas authored
[ Upstream commit 51fbf14f ] The only use of KEXEC_BACKUP_SRC_END is as an argument to walk_system_ram_res(): int crash_load_segments(struct kimage *image) { ... walk_system_ram_res(KEXEC_BACKUP_SRC_START, KEXEC_BACKUP_SRC_END, image, determine_backup_region); walk_system_ram_res() expects "start, end" arguments that are inclusive, i.e., the range to be walked includes both the start and end addresses. KEXEC_BACKUP_SRC_END was previously defined as (640 * 1024UL), which is the first address *past* the desired 0-640KB range. Define KEXEC_BACKUP_SRC_END as (640 * 1024UL - 1) so the KEXEC_BACKUP_SRC region is [0-0x9ffff], not [0-0xa0000]. Fixes: dd5f7260 ("kexec: support for kexec on panic using new system call") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Borislav Petkov <bp@suse.de> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Brijesh Singh <brijesh.singh@amd.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Ingo Molnar <mingo@redhat.com> CC: Lianbo Jiang <lijiang@redhat.com> CC: Takashi Iwai <tiwai@suse.de> CC: Thomas Gleixner <tglx@linutronix.de> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Vivek Goyal <vgoyal@redhat.com> CC: baiyaowei@cmss.chinamobile.com CC: bhe@redhat.com CC: dan.j.williams@intel.com CC: dyoung@redhat.com CC: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/153805811578.1157.6948388946904655969.stgit@bhelgaas-glaptop.roam.corp.google.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit 32ae5920 ] Shifting the u8 value[3] by an int can lead to sign-extension overflow. For example, if value[3] is 0xff and the shift is 24 then it is promoted to int and then the top bit is sign-extended so that all upper 32 bits are set. Fix this by casting value[3] to a u32 before the shift. Detected by CoverityScan, CID#1016522 ("Unintended sign extension") Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tim Smith authored
[ Upstream commit 1eb8d738 ] Flushing the workqueue can cause operations to happen which might call gfs2_log_reserve(), or get stuck waiting for locks taken by such operations. gfs2_log_reserve() can io_schedule(). If this happens, it will never wake because the only thing which can wake it is gfs2_logd() which was already stopped. This causes umount of a gfs2 filesystem to wedge permanently if, for example, the umount immediately follows a large delete operation. When this occured, the following stack trace was obtained from the umount command [<ffffffff81087968>] flush_workqueue+0x1c8/0x520 [<ffffffffa0666e29>] gfs2_make_fs_ro+0x69/0x160 [gfs2] [<ffffffffa0667279>] gfs2_put_super+0xa9/0x1c0 [gfs2] [<ffffffff811b7edf>] generic_shutdown_super+0x6f/0x100 [<ffffffff811b7ff7>] kill_block_super+0x27/0x70 [<ffffffffa0656a71>] gfs2_kill_sb+0x71/0x80 [gfs2] [<ffffffff811b792b>] deactivate_locked_super+0x3b/0x70 [<ffffffff811b79b9>] deactivate_super+0x59/0x60 [<ffffffff811d2998>] cleanup_mnt+0x58/0x80 [<ffffffff811d2a12>] __cleanup_mnt+0x12/0x20 [<ffffffff8108c87d>] task_work_run+0x7d/0xa0 [<ffffffff8106d7d9>] exit_to_usermode_loop+0x73/0x98 [<ffffffff81003961>] syscall_return_slowpath+0x41/0x50 [<ffffffff815a594c>] int_ret_from_sys_call+0x25/0x8f [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by:
Tim Smith <tim.smith@citrix.com> Signed-off-by:
Mark Syms <mark.syms@citrix.com> Signed-off-by:
Bob Peterson <rpeterso@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wenwen Wang authored
[ Upstream commit a26ac6c1 ] In isif_probe(), there is a while loop to get the ISIF base address and linearization table0 and table1 address. In the loop body, the function platform_get_resource() is called to get the resource. If platform_get_resource() returns NULL, the loop is terminated and the execution goes to 'fail_nobase_res'. Suppose the loop is terminated at the first iteration because platform_get_resource() returns NULL and the execution goes to 'fail_nobase_res'. Given that there is another while loop at 'fail_nobase_res' and i equals to 0, one iteration of the second while loop will be executed. However, the second while loop does not check the return value of platform_get_resource(). This can cause a NULL pointer dereference bug if the return value is a NULL pointer. This patch avoids the above issue by adding a check in the second while loop after the call to platform_get_resource(). Signed-off-by:
Wenwen Wang <wang6495@umn.edu> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
He Zhe authored
[ Upstream commit e6fe3e5b ] The current printk() is ready to handle log buffer size up to 2G. Give an explicit error for users who want to use larger log buffer. Also fix printk formatting to show the 2G as a positive number. Link: http://lkml.kernel.org/r/20181008135916.gg4kkmoki5bgtco5@pathway.suse.cz Cc: rostedt@goodmis.org Cc: linux-kernel@vger.kernel.org Suggested-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
He Zhe <zhe.he@windriver.com> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> [pmladek: Fixed to the really safe limit 2GB.] Signed-off-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vignesh R authored
[ Upstream commit c974ac77 ] If a child device like touchscreen is wakeup capable, then keep ADC interface on, so that a touching resistive screen will generate wakeup event to the system. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 7cea645a ] Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/video/backlight/lm3639_bl.c:403:14: warning: address of 'pchip->cdev_torch' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&pchip->cdev_torch) ~~ ~~~~~~~^~~~~~~~~~ drivers/video/backlight/lm3639_bl.c:405:14: warning: address of 'pchip->cdev_flash' will always evaluate to 'true' [-Wpointer-bool-conversion] if (&pchip->cdev_flash) ~~ ~~~~~~~^~~~~~~~~~ 2 warnings generated. These statements have been present since 2012, introduced by commit 0f59858d ("backlight: add new lm3639 backlight driver"). Given that they have been called unconditionally since then presumably without any issues, removing the always true if statements to fix the warnings without any real world changes. Link: https://github.com/ClangBuiltLinux/linux/issues/119Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Borislav Petkov authored
[ Upstream commit cf089611 ] Lianbo reported a build error with a particular 32-bit config, see Link below for details. Provide a weak copy_oldmem_page_encrypted() function which architectures can override, in the same manner other functionality in that file is supplied. Reported-by:
Lianbo Jiang <lijiang@redhat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> CC: x86@kernel.org Link: http://lkml.kernel.org/r/710b9d95-2f70-eadf-c4a1-c3dc80ee4ebb@redhat.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Vasily Gorbik authored
[ Upstream commit 34849845 ] vdso is mapped into user space processes, which won't have kasan shodow mapped. Reviewed-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shenghui Wang authored
[ Upstream commit 46010141 ] Recal cached_dev_sectors on cached_dev detached, as recal done on cached_dev attached. Update the cached_dev_sectors before bcache_device_detach called as bcache_device_detach will set bcache_device->c to NULL. Signed-off-by:
Shenghui Wang <shhuiw@foxmail.com> Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Geert Uytterhoeven authored
[ Upstream commit b790c8ea ] Calling of_node_put() decreases the reference count of a device tree object, and may free some data. However, the of_phandle_args structure embedding it is passed to reset_controller_dev.of_xlate() after that, so it may still be accessed. Move the call to of_node_put() down to fix this. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> [p.zabel@pengutronix.de: moved of_node_put after mutex_unlock] Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit e5017716 ] The "index + count" addition can overflow. Both come directly from the user. This bug leads to an information leak. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Peter Malone <peter.malone@gmail.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Mathieu Malaterre <malat@debian.org> Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit d8bad911 ] I'm not sure why the code assumes that only the first put_user() needs an access_ok() check. I have made all the put_user() and get_user() calls checked. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Peter Malone <peter.malone@gmail.com>, Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sara Sharon authored
[ Upstream commit 8c7fd6a3 ] In the past, we needed to program the keys when entering D3. This was since we replaced the image. However, now that there is a single image, this is no longer needed. Note that RSC is sent separately in a new command. This solves issues with newer devices that support PN offload. Since driver re-sent the keys, the PN got zeroed and the receiver dropped the next packets, until PN caught up again. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ronald Tschalär authored
[ Upstream commit 757c968c ] There was a small race when removing the sbshc module where smbus_alarm() had queued acpi_smbus_callback() for deferred execution but it hadn't been run yet, so that when it did run hc had been freed and the module unloaded, resulting in an invalid paging request. A similar race existed when removing the sbs module with regards to acpi_sbs_callback() (which is called from acpi_smbus_callback()). We therefore need to ensure no callbacks are pending or executing before the cleanups are done and the modules are removed. Signed-off-by:
Ronald Tschalär <ronald@innovation.ch> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-