- 05 Jun, 2015 1 commit
-
-
Antti Palosaari authored
We need own I2C locking because of tuner I2C adapter/repeater. Firmware command is executed using I2C send + reply message. Default I2C adapter locking protects only single I2C operation, not whole send + reply sequence as needed. Due to that, it was possible tuner I2C message interrupts firmware command sequence. Reported-by:
Adam Baker <linux@baker-net.org.uk> Signed-off-by:
Antti Palosaari <crope@iki.fi> Reviewed-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 01 Jun, 2015 5 commits
-
-
Mauro Carvalho Chehab authored
FE_SET_PROPERTY/FE_GET_PROPERTY actually expects a struct dtv_properties argument. Signed-off-by: -
Mauro Carvalho Chehab authored
The changeset dc9ef7d1 change the open() ioctl documentation to match the V4L2 open(). However, some cut-and-pasted stuff doesn't match what actually happens at the DVB core. So, fix the documentation entry to be more accurate with the DVB frontend open() specifics. Signed-off-by:
-
Hans Verkuil authored
To fix the last xmllint errors the open and close function reference description was rewritten based on the v4l2 open and close functions. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Fixes a large number of xmllint errors. Signed-off-by:
-
Hans Verkuil authored
satellital -> satellite antena -> antenna Signed-off-by:
-
- 30 May, 2015 34 commits
-
-
Laurent Pinchart authored
The UVC_DEV_DISCONNECTED flag is set when the USB device is disconnected, and checked in the open() handler to refuse opening a device that has been disconnected. This is inherently racy, but the race condition is taken care of in the V4L2 core, which also fails open() calls when the V4L2 device node has been unregistered. As the uvcvideo USB disconnect handler unregisters all its video device nodes, the UVC_DEV_DISCONNECTED flag doesn't serve any purpose anymore and can be removed. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
The "TOSHIBA Web Camera - 5M" Chicony device (04f2:b50b) seems to compute the bandwidth on 16 bits and erroneously sign-extend it to 32 bits, resulting in a huge bandwidth value. Detect and fix that condition by setting the 16 MSBs to 0 when they're all equal to 1. Reported-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Laurent Pinchart authored
Now that videobuf2-vmalloc supports exporting buffers, add support for the DMABUF exporter role by plugging in the videobuf2 ioctl helper. Signed-off-by:
-
Antti Palosaari authored
It is AF9035 + MxL5007T. Driver reports: prechip_version=00 chip_version=03 chip_type=3802 Not sure if that USB ID is reserved only for HP brand or if it is common, but the stick I have is branded as HP part no. 580715-001 rmn A867. Signed-off-by:
-
Antti Palosaari authored
Implement I2C client device binding. Wrap media attach to driver I2C probe. Add wrapper from m88ds3103_attach() to m88ds3103_probe() via driver core in order to provide proper I2C client for legacy media attach binding. Signed-off-by:
-
Antti Palosaari authored
Use jiffies to set timeout for DiSEqC TX ready polling. Using jiffies is more elegant solution than looping N times with sleep. Signed-off-by:
-
Antti Palosaari authored
Implement DVBv5 BER statistics. Wrap legacy DVBv3 BER to DVBv5 BER. Signed-off-by:
-
Antti Palosaari authored
Implement DVBv5 CNR statistics. Wrap legacy DVBv3 SNR to DVBv5 CNR. Signed-off-by:
-
Antti Palosaari authored
Do not return error from get_frontend() when status is queried, but the frontend didn't lock yet. The proper behavior is to only update the cache after having a lock. [mchehab@osg.samsung.com: fix the patch description] Signed-off-by:
-
Vasily Khoruzhick authored
Autogain algorithm is very simple, if average luminance is low - increase gain, if it's high - decrease gain. Gain granularity is low enough for this algo to stabilize quickly. Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by:
-
Vasily Khoruzhick authored
This cam seems to return different values on long commands, so make status check in sn9c2028_long_command() more tolerant. Anyway, read value isn't used anywhere later. Signed-off-by:
-
Geert Uytterhoeven authored
The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Florian Echtler authored
When stop_streaming is called while a frame is currently being retrieved, the buffer being filled will still be returned with BUF_STATE_DONE. By resetting the sequence number and checking before returning the buffer, it can now correctly be returned with BUF_STATE_ERROR. Signed-off-by:
Martin Kaltenbrunner <modin@yuri.at> Signed-off-by:
Florian Echtler <floe@butterbrot.org> Signed-off-by:
-
Florian Echtler authored
Add dev_dbg statements for easier future debugging; also change the warning about packet ID mismatches to debug output to avoid flooding the logs. This warning is only important in a very specific/rare use case when trying to correlate input events with video data. Signed-off-by:
-
Florian Echtler authored
Add missing functions to query the single fixed frame size (960x540) and supported frame rates. Technically, the SUR40 supports any arbitrary frame rate up to 60 FPS, as it is polled and not interrupt-driven. For now, we just report 30 and 60 FPS, which is sufficient to make most V4L2 tools work. Signed-off-by:
-
Florian Echtler authored
The SUR40 hardware can deliver images at up to 60 FPS; at full USB2 bandwidth, one raw frame will take about 11 ms to transmit. If the poll interval is above 5 ms, fully handling one frame will take longer than 16 ms and the overall frame rate will drop below 60 FPS. To get the full frame rate without blocking all the time and still allowing for a bit of timing jitter, we reduce the poll interval to 4 ms. Signed-off-by:
-
Antti Palosaari authored
U8 and U16LE format human readable names were translated with string containing emulated word. These strings were taken from msi2500 driver, where those formats were emulated (after module parameter is set). But on API correct names should be used, without any special case notes. Signed-off-by:
-
Antti Palosaari authored
Add complex unsigned 8-bit sample format for SDR capture. Signed-off-by:
-
Hans Verkuil authored
Use these defines instead of hardcoding this in any driver that needs it. Signed-off-by:
-
Hans Verkuil authored
The mapping of COLORSPACE_DEFAULT, YCBCR_ENC_DEFAULT or QUANTIZATION_DEFAULT to proper non-default values is fairly complex, and it is something that needs to be done both in the kernel and in userspace. So add macros that can do this conversion, making this available to both kernel and userspace. Signed-off-by:
-
Hans Verkuil authored
Document this new colorspace define. Signed-off-by:
-
Hans Verkuil authored
V4L2_COLORSPACE_RAW is added for raw image formats where the picture is minimally processed and is in the internal colorspace of the sensor. This is typically used in digital cameras where the image processing is done later. Signed-off-by:
-
Hans Verkuil authored
Document this new colorspace define. Signed-off-by:
-
Hans Verkuil authored
V4L2_COLORSPACE_DEFAULT is added so we have a specific define for the default case where applications do not set it but leave it to 0. In that case the driver will set the colorspace based on what it captures. This is already used, but we never had a define for the value 0. Signed-off-by:
-
Hans Verkuil authored
The log_status ioctl should report if the audio input has mode Bilingual. However, the check against the itv->dualwatch_stereo_mode is completely wrong and is a left-over from the distant past. Not only is the bitmask obviously wrong, the test itself is broken too since itv->dualwatch_stereo_mode is no longer a bitmask at all. Fix this code properly. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Hans Verkuil authored
This format was added but not documented. Do this now. Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Ricardo Ribalda authored
Support for V4L2_PIX_FMT_Y16_BE, a 16 bit big endian greyscale format. Signed-off-by:
-
Ricardo Ribalda authored
16 bit greyscale format, structured in Big Endian. Such a format can be converted into a PMN image just by adding a header. Signed-off-by:
-
Ricardo Ribalda authored
dma_map_sg returns the number of areas mapped by the hardware, which could be different than the areas given as an input. The output must be saved to nent. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Ricardo Ribalda authored
dma_map_sg returns the number of areas mapped by the hardware, which could be different than the areas given as an input. The output must be saved to nent. Signed-off-by:
-
Ricardo Ribalda authored
When sg_alloc_table_from_pages() does not fail it returns a sg_table structure with nents and nents_orig initialized to the same value. dma_map_sg returns the number of areas mapped by the hardware, which could be different than the areas given as an input. The output must be saved to nent. The output of dma_map, should be used to transverse the scatter list. dma_unmap_sg needs the value passed to dma_map_sg (nents_orig). sg_free_tables uses also orig_nent. This patch fix the file to follow this paradigm. Signed-off-by:
-
Hans Verkuil authored
The adv7604 driver depends on GPIOLIB, and therefore cobalt depends on it as well. Signed-off-by:
-
Hans Verkuil authored
drivers/media/pci/saa7164/saa7164-i2c.c:45:33: warning: Using plain integer as NULL pointer Signed-off-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Hans Verkuil authored
drivers/media/dvb-frontends/cx24120.c:837:6: warning: symbol 'cx24120_calculate_ber_window' was not declared. Should it be static? Signed-off-by:
-
